Preview doesn't show conditional fields in PDF document

A PDF document created with Adobe Acrobat has several radio buttons with a dropdown field conditional on each one. These dropdowns don't show in Preview, but do show in the Adobe reader.  Any suggestions for the form developer?

We get these files from the vendor , he creates the file in Adode illustrator for us  and he saves the f
ile in PDF format and sends them . He aslo advised he can open
the filre in acrodat pro version  and the print pervi
ew is fine and he can print the file with out any issue.
VJ

Similar Messages

  • PDF File in Preview doesn't show text fields, but OK in Adobe Acrobat

    Someone emailed me a pdf document which I opened in Preview. All the the text fields where there was supposed to be data were blank.
    I then opened in Acrobat and everything was there. Saved a copy from Acrobat and opened in Preview and the text was finally visible.
    Anyone have a clue why this would be happening?
    I'm running Leopard 10.5.1

    We get these files from the vendor , he creates the file in Adode illustrator for us  and he saves the f
    ile in PDF format and sends them . He aslo advised he can open
    the filre in acrodat pro version  and the print pervi
    ew is fine and he can print the file with out any issue.
    VJ

  • Preview doesn't show up in the capture window

    When trying to capture, the video preview doesn't show up in the capture window, only the color bars. I am able to run my transport with the buttons and the key commands, so I know the Canon ZR500 is really communicating (easy setup: DV-NTSC), via firewire. My scratch disk is a G-Raid hooked up through the firwire 800 input. The crazy thing is, it worked only one time. I've wasted one whole day and this morning, restarting, rebooting, unplugging, different tapes, etc. Next step is takew my entire setup to the so-called Genius Bart and see if Apple's Geniuses know anything about Apple software. Frustrating as ****. I will never buy Apple again.

    Careful about editorializing. There are lots & lots of Mac users who are successfully capturing from Canon camcorders. I am one of them, and have never had a problem. So there is something in your setup that needs to be uncovered, it's not FCE or Canon per se.
    One observation, you have a small hard drive (100GB) and even though you appear to have 59GB free, that's actually not a lot of space. One hour of DV consumes about 13GB and during capture the Mac temporarily needs nearly 2x that space, which means your system is using the 'inner' cylinders of the hard drive, where performance slows down; this could explain your dropped frames problem. Can you move some stuff off your system HD onto your G-RAID (say, your iPhoto and iTunes libraries if you are using those apps, they often take a lot of disk space)?

  • Template Preview Doesn't show images

    I've created a template but when i go to create a new page
    from the template the preview doesn't show the images.
    Here's what i see
    http://tel3deals.com/pics/contributeproblem.jpg
    When i give it a name and open it it shows the page with the
    images.
    any idea why this is happening ?
    Thanks.

    THis is a real stab in the dark, but at the top of the "next column" there is a small grey arrowhead next to the word "preview" which, if clicked, will rotate to two different positions. One position shows a preview, the other rotated position does not show the preview.
    Try clicking on the arrow.

  • How to show more than one PDF-Documents

    One more question to the gurus. Can anyone tell me how i can show more that one pdf-form without having to use the container-window in the sdk-example. i would like to open and show a number of pdf-documents and react e.g. when a form closes.

    "Which option is the third one? You mean "Or, make an application with
    one AcroPDF box in one form. Save it as an EXE (or whatever). You can
    now run multiple copies of your application".
    If this isn't clear, I'm not sure how to make it more clear, but I can
    try.
    Do you turn your application into an EXE today? Ok, then just start 3
    copies. Don't you have three PDF viewers?
    Aandi Inston"
    i still do not understand... let me try to explain the application a little bit. i am developing an add-in for outlook. the user can open a main-form with a lot of information on it and e.g. a button edit pdf-document. after clicking the button a pdf-document is shown and the user can view and edit it. the user must be ablke to switch back to the main-form without closing the pdf-document and open an other one to compare the two...

  • In Preview the option for mailing the selected pdf document in missing.  How do I get it back?

    In Preview the option for mailing the selected pdf document in missing.  How do I get it back?

    From the Mail menu bar, select
    Mail ▹ Preferences ▹ General ▹ Default email reader: Mail

  • HT2476 apps preview was hang when scroll thru the pdf documents

    I have upgraded my mbpro to mountain lion but application "preview" was hang when scroll thru the pdf documents. can somebody help me with solutions?

    From the Safari menu bar, select
              Help ▹ Installed Plug-ins
    Besides the following, what plugins are listed?
              iPhotoPhotocast
              Java
              QuickTime
              Shockwave Flash
              WebKit built-in PDF (absent in OS X 10.9 and later)

  • Preview doesn't show images, while Acrobat does

    I have a pdf file that has many images.  on Preview, it only shows black outline where the image should be, but the image itself is blank.
    but when I open the same document using Acrobat, the image appears.
    any idea why this is happening? 

    THis is a real stab in the dark, but at the top of the "next column" there is a small grey arrowhead next to the word "preview" which, if clicked, will rotate to two different positions. One position shows a preview, the other rotated position does not show the preview.
    Try clicking on the arrow.

  • Preview doesn't show up anything

    Hello everybody,
    It happened that "Preview" just does not open anymore any PDF I want to look at.
    The space-tab preview function still works, but I am not able to completely open up a document.
    The problem still stay even though I ran the "permission repair" tool (I just gave it a chance...) and several restarts.
    Does anybody know ho to fix this?
    Thanks for any help, best regards.
    Vincenzo

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Please take this step regardless of the results of Step 1.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

  • SharePoint 2013: Hide/Show Column fields while uploading document in Document Library

    Dear all,
    I have created a document Library LIB001 and I have created One Column of type Choice, drop down list, (CCHOICE) and I have created 3 other columns, (Column1, Column2, Column3).
    What I want is while uploading a file in the document library, when I choose a certain value from CCHOICE, i want to show/hide and/or make the column mandatory.
    Can anyone help/guide me how to achieve this?
    Many Thanks
    Vinay

    Dear all, I am trying the following code, but it's not entering the onchange of drop down list event. <script> $(document).ready(function () { var countryField = SPUtility.GetSPField('Document Type'); var countryFieldValue = countryField.GetValue(); alert
    (countryFieldValue); // ----- Hide/Show the field based on new selected value. var id = SPUtility.GetSPField('Document Type').Dropdown.id; alert ('field ID: '+id); $('#' + id).on('change', function () { alert ('Inside on Change:'+countryFieldValue); if (countryFieldValue
    == 'Type1') { SPUtility.GetSPField('Column1').Hide(); } else if (countryFieldValue == 'Type2') { SPUtility.GetSPField('Column2').Hide(); } }); }); </script> Can anyone help me please. Many Thanks & Regards Vinay

  • Email shows first page of PDF document but won't let me launch iBooks

    Hello, I've been trying to launch iBooks from an email with a PDF attachment. The email shows the first page of the PDF document but there's nothing I can do from there. I can launch iBooks from safari to read the PDF but I need to do it via email.
    Thanks,

    I forgot to add that the first page of the PDF document shown on the email is actually an image. I don't know why the mail client does that.

  • Why Preview doesn't show always power terms (m^2 etc) in pdf?

    There is clear cap between letters but the number is missing.
    Like this one
    Between m an K should be a 2 but it has vanished for some reason. If I look same document with PC the power term is in it's right place.
    But sometimes it works. Like in this one:
    This is from same document but different page.
    And if power term is missing from a formula the answer will be wrong.
    I can not use this type of unreliable software. How can I fix this?
    (The whole document is here http://www.ym.fi/download/noname/%7B8C5C3B41-E127-4889-95B0-285E9223DEE6%7D/4046 8 )
    I'm using iMac SO X Yosemite 10.10.3.
    Have anyone noticed same problem?

    Thank  you for your reply.
    Indeed, I tried saving a PDF that had the "default appearance", it shows exactly the same. So it looks like it "can't" show the image.
    However, of course, I do want the image to be shown. How can I achieve this? How can I tell Adobe Reader (and other PDF viewers) I really really realllyyyyy want to see that image there? I believe I'm not doing anything really exotic, right? There must have been tons of other people that wanted to do the same thing, I guess?
                        var annotation = new PDFLinkAnnotation
                                    Action = new PDFUriAction(this.GetCodeUrl(code)),
                                    Contents = AnnotationIdentifier,
                                    Appearance = new PDFImageAppearance(bitmapImage),
                                    DisplayRectangle =
                                        new DisplayRectangle(
                                        barcodeLocationInfo.X,
                                        barcodeLocationInfo.Y,
                                        barcodeLocationInfo.Tsw,
                                        barcodeLocationInfo.Tsh),
                                    Flags = Flags
                        pdfPage.Annotations.Add(annotation);

  • Preview doesn't open integrated links in PDF-Files anymore.

    Is this a common problem with all Lion Users? Or have I forgot something in the settings panel?
    In Snow Leopard I clicked on the blue highlighted link in the PDF file and the link was opened via Safari.

    Two-page view doesn't start until pages 2-3. The way they've set it up, there is always an even-numbered page on the left and an odd-numbered page on the right -- which is the norm for printed books.
    In Apple's eyes, I guess this is a feature, not a bug. But I find this very annoying, especially because it means that it's impossible to display the two pages of a 2-page PDF file side by side using Preview. At the very least, this behavior should be controllable from preferences (e.g. a check-box for "always display even-numbered pages on left in 2-page view" that can be unchecked).
    The various Adobe PDF-reading programs do not have this "feature", so I guess you need to use something like that to solve the problem.

  • File explorer (windows 8) doesn't show the properties of pdf files such a keywords or tittle. Neither when click on second button. I just see them when the file is opened with adobe reader (file prperties)

    I attach some picture to show the problem.
    Im sorry because the os is in spanish, so i translate for you the fileds names shown
    etiquetas means tags or keywords or labels, as you can see in the first picture at the second row, some file (office pack) show the tags but the selected one doesn't (pdf).
    propiedades means properties. The properties shown are different if I opened from file explorer to acrobat.
    I think there is a compatibility problem with the xmp file (metadata) from pdf file ans windows 8.1 (64bits). I tried to solve it by installing a missing file called ifilter, but the problem continues

    I believe this is all normal.

  • Preview doesn't show some info shown by Acrobat Reader

    I received a pdf attachment announcing a local job fair actually being run by Microsoft. It displayed in my mail message but they seemed to have omitted the date of the fair. I asked friends with Windows machines who had also received that mailing and attachment, and they said that the date is showing right at the top. So I detached the PDF, opened it in Adobe Reader 7.0.7 and the date was right there in big letters. Then I opened it in Preview, and the date was missing again (as were a couple of other lines). I checked, and the version of Preview I am running is 3.0.6, and it's obviously got a problem.

    We get these files from the vendor , he creates the file in Adode illustrator for us  and he saves the f
    ile in PDF format and sends them . He aslo advised he can open
    the filre in acrodat pro version  and the print pervi
    ew is fine and he can print the file with out any issue.
    VJ

Maybe you are looking for