Preview doesn't show some info shown by Acrobat Reader

I received a pdf attachment announcing a local job fair actually being run by Microsoft. It displayed in my mail message but they seemed to have omitted the date of the fair. I asked friends with Windows machines who had also received that mailing and attachment, and they said that the date is showing right at the top. So I detached the PDF, opened it in Adobe Reader 7.0.7 and the date was right there in big letters. Then I opened it in Preview, and the date was missing again (as were a couple of other lines). I checked, and the version of Preview I am running is 3.0.6, and it's obviously got a problem.

We get these files from the vendor , he creates the file in Adode illustrator for us  and he saves the f
ile in PDF format and sends them . He aslo advised he can open
the filre in acrodat pro version  and the print pervi
ew is fine and he can print the file with out any issue.
VJ

Similar Messages

  • Preview doesn't show up in the capture window

    When trying to capture, the video preview doesn't show up in the capture window, only the color bars. I am able to run my transport with the buttons and the key commands, so I know the Canon ZR500 is really communicating (easy setup: DV-NTSC), via firewire. My scratch disk is a G-Raid hooked up through the firwire 800 input. The crazy thing is, it worked only one time. I've wasted one whole day and this morning, restarting, rebooting, unplugging, different tapes, etc. Next step is takew my entire setup to the so-called Genius Bart and see if Apple's Geniuses know anything about Apple software. Frustrating as ****. I will never buy Apple again.

    Careful about editorializing. There are lots & lots of Mac users who are successfully capturing from Canon camcorders. I am one of them, and have never had a problem. So there is something in your setup that needs to be uncovered, it's not FCE or Canon per se.
    One observation, you have a small hard drive (100GB) and even though you appear to have 59GB free, that's actually not a lot of space. One hour of DV consumes about 13GB and during capture the Mac temporarily needs nearly 2x that space, which means your system is using the 'inner' cylinders of the hard drive, where performance slows down; this could explain your dropped frames problem. Can you move some stuff off your system HD onto your G-RAID (say, your iPhoto and iTunes libraries if you are using those apps, they often take a lot of disk space)?

  • Template Preview Doesn't show images

    I've created a template but when i go to create a new page
    from the template the preview doesn't show the images.
    Here's what i see
    http://tel3deals.com/pics/contributeproblem.jpg
    When i give it a name and open it it shows the page with the
    images.
    any idea why this is happening ?
    Thanks.

    THis is a real stab in the dark, but at the top of the "next column" there is a small grey arrowhead next to the word "preview" which, if clicked, will rotate to two different positions. One position shows a preview, the other rotated position does not show the preview.
    Try clicking on the arrow.

  • Windows 7 Music Library doesn't show some of my album art all of a sudden. No solutions found!!

    So my music files in my music folder on the computer still doesn't show the album art. some of the art covers still exist on the music files but newly downloaded and some music files that existed don't show the album art anymore.
    I've tried most of the solutions online but none of them solved the problem. I don't think it's the media player because when I play it on the media player it shows the album art for the music. And I also cleared the cashe in the mediaplayer folder. There
    must be something with the system because the folder showed the cover art before but all of a sudden it stopped displaying them. 
    I don't know what's wrong with it...is there something that makes the music album art not show all of a sudden and the album art doesn't show for the newly downloaded music as well...

    Hi haydnan
    It may be a problem of Windows 7 Explorer. First you can try all the different explorer views, title, Large icon..
    If there is no effect, you can try to the following methods.
    In Windows Explorer
    1. left click on the mail folder where your music is stored and select it.
    2. Now right click and go to “properties”.
    3. Now click “advanced”.
    4. Put a check in the “Allow files in this folder to have contents indexed in addition to file properties”.
    5.Click ”OK”.
    6.Click”Apply”.
    7. Click “OK” to apply changes to this folder. Sub folders and files.
    Now go to your music library and see if it works.

  • Finder doesn't show some files after several days of uptime

    It is several days my MacBook Pro is turned on:
    $ uptime
    11:08  up 10 days, 12:02, 2 users, load averages: 1.12 0.80 0.60
    and Finder is starting to behave strange...
    the first thing I noticed is that it doesn't show anymore the contents of application packages (ie. right click on a .app and click Show Contents, shows an empty finder window, like there were no files, but from Terminal I'm able to see contents).
    also some other files are not visible. for instance I just downloaded a file in Safari, but I can't see it in its folder with Finder, but I can see it and open it with Terminal.
    before trying a reboot, what could I do to solve this issue?
    perhaps restart Finder? but what is the correct way of restarting it? killall Finder (or some signal other than SIGTERM)?

    To restart Finder, hold the option key whilst "right-clicking" (or two-fingered tap on a trackpad), on the Finder option in the Dock.
    You will see an option to "relaunch".  Select it, and Finder will restart.

  • Trace file doesn't show any info about error

    Dear all,
    DB : 10.2.0.4
    Solaris 5.10
    We have a background program to do some activities in the Database.
    Today ,when running the program we got the below error :
    1) 20221: errexit, ORA-00001: unique constraint (MEDS.MED_USER_EQUS_HIST_PK) violated.
    I ran a trace of this session and the trace file doesnt have any info about the error..ran trace using the below command :
    exec sys.DBMS_SUPPORT.START_TRACE_IN_SESSION(2166,30629, false,TRUE);
    why is that the trace file doesn't have any info about the error.
    2) I disable the constraint disable novalidate.
    even then I got the same error .. why is the constraint getting validate even if I disable the constraint ?
    Please guide
    Kai

    As usual this question has documented answers, and you are asking this question, because you consistently refuse to read any documentation. So in your case the answer could have been 'Yes, there is. See the docs'.
    You could actually say you are in gross violation of the forums etiquette post, and are abusing this forum.
    If you would have read the docs, you wouldn't have used dbms_support (which was never supported for end-users), but you would have looked at
    http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14258/d_monitor.htm#i1003679
    and what do you see?
    The life of a DBA can be so easy when he makes an attempt to find information himself!
    He doesn't have to wait until some kind soul answers doc question 779!
    Sybrand Bakker
    Senior Oracle DBA

  • Lightroom 5 doesn't show GPS info from canon 6D

    Lightroom 5 doesn't any longer show GPS info from canon 6D in imported rawfiles. This regards MacOS-version. It works in iPhoto and in Lightroom 5 for Windows 8! Strange...

    I think I was having the same issue - after all I found out that when importing photos via Lightroom, I was overwriting the GPS information by "updating" the metadata by using the preset I used to use for my scanned film photographs. 
    Check the following:
    When importing, on the right hand side you see "Apply During Import"
    If you have the "Metadata" section "None" then this is not the solution for you.  But if you have something else, make sure that you go into "Edit Presets" then UNCHECK "GPS" section of it. 
    Hope this helps. 

  • Preview doesn't show conditional fields in PDF document

    A PDF document created with Adobe Acrobat has several radio buttons with a dropdown field conditional on each one. These dropdowns don't show in Preview, but do show in the Adobe reader.  Any suggestions for the form developer?

    We get these files from the vendor , he creates the file in Adode illustrator for us  and he saves the f
    ile in PDF format and sends them . He aslo advised he can open
    the filre in acrodat pro version  and the print pervi
    ew is fine and he can print the file with out any issue.
    VJ

  • Preview doesn't show images, while Acrobat does

    I have a pdf file that has many images.  on Preview, it only shows black outline where the image should be, but the image itself is blank.
    but when I open the same document using Acrobat, the image appears.
    any idea why this is happening? 

    THis is a real stab in the dark, but at the top of the "next column" there is a small grey arrowhead next to the word "preview" which, if clicked, will rotate to two different positions. One position shows a preview, the other rotated position does not show the preview.
    Try clicking on the arrow.

  • Safari MAC doesn't show some web images

    I have OS X 10.8.4 and Safari 6.0.5. Suddenly, Safari is not showing some web images any more. As an example, I cannot see the Google image in google web page and I cannot see anything in Appel web page. I have tried to reset Safari, to empty web cache but nothing works. I can see perfect web pages using Firefox. Any suggestion?

    Safari > Preference > Advanced
    Checkmark the box for "Show Develop menu in menu bar".
    "Develop" menu will appear in the Safari menu bar.
    Click Develop and deselect "Disable Images" if selected in the dropdown.
    Best.

  • HP deskjet 1000 doesn't show in printers list in adobe reader

    It doesn't shows in adobe readers but it does shows in all other softwares on my computer. The verison is 11.0.06
    Thanks

    It doesn't shows in adobe readers but it does shows in all other softwares on my computer. The verison is 11.0.06
    Thanks

  • Preview *****! How do I make Safari use Acrobat Reader?!

    Hi everyone...
    I'm trying to fill out some forms for work, and there are several problems when I use Safari combined with Preview. Does anyone know how to force Safari to use Acrobat instead?
    I've already tried re-installing Acrobat Reader, and repaired the installation, change the preference in Acrobat telling it to open PDF's in Reader, but for whatever reason, it doesn't.
    Please help!!!

    HI,
    Open Acrobat Reader then from the Menu Bar click Adobe Reader/Preferences.
    Select Internet on the left. On the right click the pop up menu next to:
    Display PDF in browser using. Select: Adobe Reader
    Carolyn

  • Problem searching some PDF files in Acrobat Reader – Non-ASCII characters

    Acrobat Reader cannot search some .pdf files.  I have put an example document up on Scribd here.
    Any attempt to search for any word that can be clearly seen to be in the document fails with “No matches were found.”
    This example document is NOT a scanned document – words and characters can be selected.
    A hex display tool shows that the characters in a PDF document that can be successfully searched are in the ASCII/1252 range (A=0x41, etc).
    Copying and pasting characters in the example document to a hex display tool shows that the characters in the document are not in the ASCII range.
    For example the letters A to Z in the example document are in the range ‘A’ = 0xDF (decimal 223), ‘B’ = 0xDE (decimal 222), through to ‘Z’ = 0xC6 (decimal 198).
    However, characters in these non-ASCII ranges are displayed perfectly by Acrobat Reader, as can be see if the example document is opened.
    Therefore, as Acrobat Reader knows what these characters are, it doesn’t seem unreasonable to say that it should be able to search for and find them.
    Tests were performed using Acrobat Reader X v10.1.4.
    Can anyone say what this problem is?

    Hi Pat, thanks for your reply. 
    Your reference to the title of that page being 'HARNESSES' indicates that, when you view that document in Adobe Reader, you are seeing 'HARNESSES', not
    "ØßÎÒÛÍÍÛÍ".  And that the remainder of the document is similarly being displayed in readable English language.
    Yes as you say, you can search for 'ß' and get hits on 'A' (to use that as an example) in the example document.
    But the need to form a word to be searched for into whatever code mapping this is using (for example having to enter "ØßÎÒÛÍÍ" for HARNESSES - I'm not even sure how that would be entered from a keyboard) doesn't seem to be very convenient.
    Its clear the example document is using some code mapping other than ASCII / Windows-1252 (which has 'A' as 0x41).  But it is also clear that Adobe Reader knows what that mapping is, and knows to use it, as its displaying (for example) 'A' for the code 0xDF. 
    So I guess the question is - why isn't Adobe Reader's knowledge of this mapping being extended to its search input? 

  • Preview doesn't show 'open recent' items

    When Preview is open, File-->Open Recent shows only 'clear recent'. Checking all different values for 'recent items' in System Preferences makes no difference in Preview. Some other apps work with 'Open Recent' (eg Pages) but not all (eg TextEdit behaves as Preview). Anybody see something similar, or know a fix? Thanks!

    Triple-click the line below to select it:
    ~/Library/Preferences/com.apple.Preview.LSSharedFileList.plist
    Right-click or control-click the highlighted line and select
    Services ▹ Show Info
    from the contextual menu.* An Info dialog should open.
    Does the dialog show "You can read and write" in the Sharing & Permissions section?
    In the General section, is the box labeled Locked checked?
    What is the Modified date?
    *If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). Open a TextEdit window and paste into it (command-V). Select the line you just pasted and continue as above.

  • My Ipod doesn't show some of the songs I have? Please I need an answer

    My Ipod is perfectly organized by Artists and when I select some of them, few song are shown; for example I have 10 songs of The Doors and it only shows 4. If I search them, with the search feature, they appear. How do I fiz this?

    There are usually two things that contribute to songs not appearing under Artist on the iPod, both due to information either in or missing from the Get Info>Info tab against the song in iTunes. 1) the song has no album name associated with it or 2) the song is marked as part of a compilation.
    If tracks are missing an Album name in the Info tab, this information needs to be filled in. The no album one is a bit quirky as the songs will appear under certain circumstances but the simplest remedy is just add None or Miscellaneous in place of a title. See this link for more detail: I don't see some of my songs when browsing by artist on my iPod
    Also if the tracks are ticked in the Get Info>Info tab as part of a compilation, they will not appear under Artist on the iPod. Highlight a song in iTunes that you know is not appearing correctly on your iPod. Right click on it and choose Get Info and click the Info tab (alternatively choose Get Info from the File menu), if "Part of a Compilation" is marked untick it and afterwards update your iPod, you should find it now appears as normal. Compilations are stored in a separate folder in iTunes so the songs don't appear inside the normal Artist>Album folder.
    I've also seen a problem quoted that seems to be related to the “Album Artist” field in the info tab. If you have multiple songs from the same artist and one of these songs for instance has the artist name in the Album Artist field, then the songs that display on the iPod under the Artists list are restricted to that one.
    The no album one is a bit quirky. If all songs have no album, you can view them all under Music -> Artist. Also, if you have songs from two albums or more and songs with no album, it works. However if there are songs from one album and songs with no album they don't show.

Maybe you are looking for