Preview during capture

P.E. version 9.0.1 , operating system Vista 32 . When capture video from camcorder via fire wire , don't have preview , but video and audio captured O.K.
What should I look to solve this?
Ted

Hello again;
I been looking to some sources include Adobe and didn't find nothing about no capture preview in P.E.9. Only in the Read Me file , Adobe mention that some streaks could be visible on capture preview screen due capturing
interlaced footage.However I was successful with capture preview until I get updates from Adobe , updated graphics driver from nVidia and get windows updates. Going further I installed my old  P.E.4.0 which I been using for few years and with this program I have preview on capture screen when capturing HD footage.My conclusion: something is corrupted in P.E.9 either to updates or poor writing of the program.
Another issue with P.E.9 is rendering. When I render timeline and save , then exit program and open project again red line above time line is still present. I have to render again to get this job done.
I contacted Adobe about this issue and after several back and for calls answer from Adobe was "this is going since version 4.0 and Adobe is working on this ,and will send you update". It is over year now
and no update resolving rendering problem, but I don't have rendering problem in version 4.0.
Ted

Similar Messages

  • Video preview during capture CS3

    Video preview during capture is not working even though settings are at preview video and audio during capture.
    The work around seems to be to go ahead record anyway (red button) then it works after I paste the captured audio onto the timeline.
    When pasting it to the timeline the video appears. The video appears during subsequent captures. It seems like a bug in CS3. This was not a problem with PP 1.5
    Thanks

    A few more of
    these details will help us help you.
    Cheers
    Eddie
    Forum FAQ
    Premiere Pro Wiki
    - Over 250 frequently answered questions
    - Over 100 free tutorials
    - Maintained by editors like
    you

  • No video Preview During Capture

    Here is the scoop:
    Adobe Premeire CS5
    Windows 7 64bit
    Canon XL2
    Capturing DV NOT HDV
    Canon standard device control as there is no preset listed for the XL2
    Video and audio actually captures fine. I can hear audio during capture but cannot see any video.
    I know there is no video preview when capturing HDV but I am capturing DV.
    Again this is CS5 NOT 5.5 so .dll fix is not an option
    Thanks in advance.

    FIXED!
    Heres how it went:
    Went to Device Manager and let windows look for an updated driver for my Graphics Card (Radeon HD 4200). Windows said the most current driver was installed. It was NOT the most current driver. I went out to ATI and got the most current driver, installed, reboot and OH JOY! I get video in the capture window during preview AND during capture (of DV)!
    I also let windows (device manager) look for updated drivers for sound and it said the driver was the most current. Again, it was not. so the moral of the story is...Don't trust Device Manager on current driver versions.
    Hope this will help some folks out there.
    Side Note*
    Most of us spend hours on forums looking for answers/fixes to particular problems. Most replies I see are either in the vein of "I have that problem too" or " try this, it worked in this OTHER version or try this OTHER software" etc. If you dont have an answer/fix for the problem, dont post.
    ON the flip side of that, when posting a problem you want an answer to, Give all the pertinent information in your initial question. " Premiere crashes when I plug up my camera" does NOT suffice! What version of Premiere, what camera, what OS, What kind of connection, etc.

  • Audio preview during capture

    Hi
    How do I get audiopreview during capture?
    When I playback audio output works fine, during capture its off.
    When I look in the Audio/Video Settings in the tab Capture Settings I can read in the right summary field that the speaker is off, how do I get this on?

    HDV does not allow monitoring audio during capture.
    If you are working with DV, there is a checkbox to turn it on. The location of the box varies with the version of FCP.
    The simpler solution is to just to route the analog audio out from your deck or camera to a pair of speakers. This has the beauty of not adding to the processing overhead during capture.
    x

  • No preview during capture issue

    Hi - I have Adobe Premiere setup to show me the video while it's capturing it form my camcorder, but for some reason it only shows the first frame at that's it.  it does capture it correctly.  What could be the issue?
    Thanks,
    Roberto

    Hmm.  I've not yet seen this issue under these conditions.  The Scenalyzer suggestion may be worth investigation.  WinDV is another capture utility, not quite as feature rich as Scenalyzer, but it is free.

  • Pp CS6, HDV CAPTURE, NO VIDEO  PRIOR TO OR DURING CAPTURE

    pp CS6 pc, HDV CAPTURE, NO VIDEO  PRIOR TO OR DURING CAPTURE.
    wITH CS5.5 YOU WOULD SEE VIDEO IN THE PREVIEW WINDOW BEFORE PRESSING THE RECORD BUTTON. THEN IT WOULD CAHNGE TO A BLUE SCREEN DURING CAPTURE. NOW JUST BLACK BUT IT DOES RECORD FINE.
    ANY IDEAS? BUG? SORRY FOT THE CAPS...OOOPS.

    During capture?  That is new...
    Ann Bens wrote:
    I captured some hdv this weekend in CS6 and i had preview during capture. This would be windows.

  • Unable to monitor audio during capture

    I'm using FCP6 to capture footage shot with a JVC GY-HD100U at HDV 720p24. I'm using a JVC BR-HD50 deck to capture from, connected to my MacPro 3 GHz quad via firewire.
    In the Audio/Video Setting dialog box, the Sequence Preset is "HDV 720P24". My Capture Preset is "HDV", Device Control Preset "HDV FireWire". Video Playback shows "[Missing] Apple Firewire NTSC (720 x 480)" and offers only the options of None and Digital Cinema Desktop Preview–Main as alternate choices. Both HDV options are greyed out. The Audio Playback option is set to Default.
    With this setup, controlling the deck remotely from the capture window, I get video but no audio. The only audio I get is when the deck is connected to my video monitor and I use it to monitor the output of the deck. The audio is there when I play back the clips after capture but I cannot monitor the sound with the computer's speakers. If I go to the A/V Devices tab, under Video, it shows the same "[Missing] Apple Firewire NTSC (720 x 480) with the same choices described above, and the Options button next to it doesn't do anything.
    Can anyone think of anything I've missed in the initial setup?
    Keith
    Message was edited by: Keith R Thompson

    Keith,
    For whatever reason (perhaps the intense processor needs) HDV does not allow you to monitor your audio during capture. The computer just will not do it. What I have done, if I really want to hear what's happening durning capture, is plug my speakers into the headphone jack of my XL H1. Due to the processing that's going on, the audio "lags" behind the video by a couple of seconds.
    I'm pretty sure this is not a setup problem, but just a limitation due to the nature of your format.
    Hope that helps!
    ~Luke

  • Sound Audible during capturing

    Hi, Suddenly I can hear the audio during capturing, HDV, anyone know how to turn it off?
    Thanks,
    Andy

    you're not alone. I've been having the exact same problem for months. FCP 6, capturing HDV. I can't turn the audio preview off. I can't listen to itunes without hearing what is being captured.
    here's my previous unresolved post:
    http://discussions.apple.com/message.jspa?messageID=7052428#7052428
    still haven't figured it out. I tried switching to capturing DV, turning the audio Preview on and then off and then switched back to HDV. still no solution. Apparently there are some that wish they had the opposite problem.

  • Flilcker interlaced during capture, Monitor is perfect. CS4

    When capturing DV from a normal panasonic dv cam (GS250) into adobe premiere CS4 (4.2.1) i get flicker / interlaced image in the capture window during preview. But when I look at the captured video in the source monitor afterwards, the video image is perfect.Just upgraded from windows xp premire CS2 to windows 7 (64 bit) premiere CS4. Same camera. The problem with flicker during capture is not present when I use VirtualDub for capture in windows 7. Playback of the captured avi file is perfect, both from VirtualDub and Premiere.

    To be more precise (this is difficult to explain in english for me):
    1) Connect the camera
    2) press F5 to get the Capture window
    3) I press play button to start viewing whats on the tape in the camera. The video image is now "flickering" of "interlaced".
    4) press G to start reccoring. The video images is still flickering/interlaced
    5) press Escape
    6) save the clip
    7) drag the clip to the time line
    8) replay the very same clip from the timeline, video images is now perfect with no trace of flickering/interlaced.
    So it is actually saved allright into the computer. There is nothing wrong with the avi-file. It is just how it looks during capture.
    I also tryed to view whats on the tape on the campera in another program called PowerDirector (a program that was pre installed in the coomputer). The video image is perfect in PowerDirector. I also checked the camera in my old computer, also perfect there.Then I tested Adobe OnLocation to see if I could get something similar there. But no, video image also perfect in OnLocation. I alse verifyed that I had set my project to PAL 25 fps 4:3, the same as the camera.
    This problem is _only_ in Adobe Premere CS4 (windows 7 64bit) and _only_ in the capture window.
    (I also tryed to change the driver for the firevire card. There are 3 built in drivers It didn't help.)

  • Red interference during capture with FCP 5.1.4

    I have FCP version 5.1.4 . I am using OSX 10.6 snow leopard (Macbook Pro). Have captured and edited without any problems. All of a sudden I am getting an interference during capture. This interference comes in the form of a bright red color which suddenly fills half my screen from corner to corner forming a right angled triangle and hiding half of my picture triangularly. it flashes and then remains. Anyone know what the **** this is and how I can rectify it?
    I would be EXTREMELY for any help anyone can give me. Thanks in advance.

    This is happening to me today as well. Has it got something to do with 10.6.7 I have just updated and now I seem to be having the same problem
    Pleasa Help

  • I have the latest downloadable version of LR5.  It crashed while it was createing 1:1 previews during an import. After a Win7(64) restart, it shows a message that LR needs to quit because it can't read the preview files and it will try to fix it the next

    I have the latest downloadable version of LR5.  It crashed while it was createing 1:1 previews during an import. After a Win7(64) restart, it shows a message that LR needs to quit because it can't read the preview files and it will try to fix it the next time is launches.  I get the same message the next and every subsequent time it launches so I can't launch LR at all now.
    I get that the preview file got corrupted somehow.  Is there some way to fix this problem without building a new catalog?

    Use Windows Explorer to open the folder containing your catalog. You will see a folder with the extension .lrdata. You need to delete that folder and then start Lightroom again. Lightroom will generate a new previews folder.

  • Scanning in Mavericks? I can no longer use the scanning function in my HP Officejet 4500. HP says to go through Preview, Image Capture, or Print/Scan in System Prefs. Still doesn't work. Any ideas/similar experiences?

    Scanning in Mavericks? I can no longer use the scanning function in my HP Officejet 4500.
    HP says to go through Preview, Image Capture, or Print/Scan in System Prefs.
    Still doesn't work. Any ideas/similar experiences?

    Sure it is, yet it's called HP LaserJet Professional M1210nf MFP Series *
    Today, I followed your other advice, and deleted the printer, deleted the /Library/Printer/hp folder, downloaded the entire set of driver, re-installed the printer twice, once with the driver, once with Bonjour.
    The Bonjour Printer has the scan option active, but it is doesn't work (refer to above.), it is called M1217nfw
    The Apple Driver Printer doesn't show the scan option at all, it is called M1217nf (as on the http://support.apple.com/kb/HT3669#HP list.) This model number doesn't exist, as far as I can tell. 
    Still, everything works perfectly in Snow Leopard, for a MF printer that has been manufactured years after Snow Leopard was released.
    Why going up in software version means going backwards in compatiblity for brand new product is really the question that puzzles me here.

  • Help Please?  Dropped frames during capture!

    Hello everyone, I am capturing from a mini DV camera to FC Express HD using a fire wire. I've been doing this for a year and all the sudden I'm getting a "dropped frame during capture" message.
    I have read many many discussion boards and tried all of your suggestions...
    Using different camera's, different tapes, different firewire cables. I've uninstalled and reinstalled FC EX HD and Quicktime. I tried turning off my external drives and using the internal drive to capture to and created a FC project within the internal drive. I have plenty of space on all drives.
    Does anyone have any other ideas? Nothing seems to be working. I appriecate your help!!!!!
    G5   Mac OS X (10.4.9)   final cut express hd

    maybe you switch off the warn dropped frames during
    capture option... after that watch your clips... is
    there any problem still?
    I'm really worried now. I turned off the "warn dropped frames" option. After capture, when I playback, I get a warning that there are dropped frames, and then picture freezes. Help! I don't know what to do!
    G5   Mac OS X (10.4.9)  

  • Dropped Frames During Capture

    FCE HD is dropping frames during capture when I'm taking video from my Canon Video camera and the three DVD players I've been using. Any suggestions or ideas?
    Here's my info:
    - Didn't work for either of these setups:
    - Canon to my iBook G4 via firewire
    - DVD player to DVD converter via RCA cables to ibook via firewire
    - My external Harddrive (LaCie 230 GB) is hooked up to my laptop via USB Drive.
    - Easy setup configured to DV-NTSC or DV-NTSC-DV Converter dpending on capture device
    Thanks in advance for the help

    Hi Lisa,
    Well, for starters you probably have less free space on your internal HD than you did a year ago - rule of thumb is keep at least 15%-20% free space on your drives, especially your system drive; more free space is better. Couple that with the fact that USB really can't keep up with the demands of video and it's easy to get dropped frames.
    There's also the question of what else you've put on your machine since last year, whether or not you updated OSX or QT since then, if you have anything else running when you capture ... there could be lots of factors.
    Have you ever run a maintenance utility on your Mac - eg. MacOSXCocktail, MacJanitor, Onyx, etc ?

  • No sound captured during Capture Now

    First time in many moons using FCP. I'm capturing from a mini DV (Canon Eulura 70) using the Capture Now function. The problem is that it appears that no sound is being captured. I've read other posts about not hearing sound during capture... at the moment I'm using headphones connected to the camera and the sound is fine. I'd prefer to use the computer to monitor the sound but I cannot locate a checkbox anywhere to turn this feature on.
    When I drop the captured clips onto the canvas no corresponding audio file appears in the timeline, and no audio plays during playback. I've checked the clip setting in log/capture and it's set to capture both video and audio. I've checked System Settings, and under Scratch disks it's set to capture video and audio separately. Audio playback in FCP is set to built-in audio. Sound is working fine in all other applications.
    I've tried trashing the preference files but no effect. Also I tried to just capture audio, and as soon as I hit esc, FCP crashes... this is totally repeatable. I also noticed that on the clip setting tab there is a section with a bunch of sliders (7 in all)... don't know what they do, but they are all greyed out.
    Camera works fine in iMovie...
    Message was edited by: Ronald Dans1

    There are no check boxes on that tab, only a pull down list entitled "Capture". The choices are Video and Audio, Video only, Audio only. I have it set to Video and Audio. Perhaps there are checkboxes in another version?

Maybe you are looking for