Preview Error code -43

Hello . ( Sorry if any mistakes with my english... I'm french)
Back to Mac since few days with a MacBook Pro 13" - 10.5.8
Using Preview (Soft called Aperçu in french) , i opened several PDF files, the added some notes on them, then saved and closed the files.
Now, i cannot reopen the PDF files, always got same error code -43.
What can i do ?
Thank's

Hi,
I'm experiencing the same issue. It happens when I open an OCR-ed PDF and then highlight or underline text. After I save the PDF, when I try to reopen it, I receive 2 dialog boxes:
The first error message:
The application can't be found.
The second error message:
The operation can't be completed.
An unexpected error occurred (error code -43).
Please help.

Similar Messages

Error code 0x0000000A installing Windows 10 Tech Preview on VirtualBox

Hello
I am trying to install Windows 10 Technical Preview on VirtualBox but I am receiving a message with the error code
0x0000000A
Parameters
0xFFD00000
0x000000FF
0x0000000A
0x81D171D3
I am tring to install with the archive WindowsTechnicalPreview-x86-EN-US.iso on a VirtualBox Configuration for Windows 8.1. (32 bits)
The parameter for hardware acceleration VT-x/AMD-V is enabled.
I have created before other virtual machines with other operating systems without issues.
All those machines have been created with the last updated release of VirtualBox what is 4.3.16. and that is the same one that I am using this time.
Thanks in advance
Regards
German

Do you have hardware support for virtualization on windows 8.1? Ensure that your VT-x/AMD-V acceleration is enabled also enable this feature in the BIOS setting menu.
Follow the given steps:
Reboot your computer and access the BIOS section> Advanced -> CPU Configuration
Click to enable the "No-Execute Memory Protection" option.
Go to Exit section. Choose Save Changes and Exit
Restart your system.
Here is a relevant Discussion, hopefully it would prove helpful:
https://forums.virtualbox.org/viewtopic.php?f=6&t=63125

Some data in ... could not be read or written. (Error code -36).

Hello.
I just got a Lacie 512mb disk, and thought it would be ideal for running my iTunes library off of. Got the disk, ran it through its paces, hooked it up to my Mac mini, and I can't seem to copy hardly any files over. Here's one error (but you can replace "iTunes Library" with any song and it's the same thing)...
'The Finder cannot complete the operation because some data in "iTunes Library" could not be read or written. (Error code -36).'
So, I think there's disk or file damage, etc. I boot off an external and run Disk Utility, DiskWarrior and TechToolPro against it - everything checks out fine.
But I can't copy files from the mini's internal to my external Repair Boot disk or the Lacie 512. Always that same -36.
So, at first I think it's the mini, then I think it's the Lacie, because it's new, so I reformat it: same issue. And that coupled with it won't copy to my Repair Boot, makes me think the mini again.
But, I've got a g1 iPod mini hooked up (formatted in hfsj+), and I can copy this file to the iPod mini, but no where else. I not sure what this makes me think.
And, I can duplicate the file on the Mac mini. In fact, if it's a song file that won't copy (none of them will), I can play it just fine.
Thanks.
Mac mini Mac OS X (10.4.3)

I experienced a problem in a familiar way.
After a recording session I tried to copy the complete folder with session and sound files to another disk (original and target disk both LaCie d2 250 FW800).
Somehow the proces stopped prompting an -36 error over some files.
When I look up these files in the Finder, it seems to have an iTunes audio-file icon instead of a ProTools audio-file icon (and so other standard app to open with). All the other files will copy fine. The files will play with quicktime in the preview window.
Any-one a solution?
Almost seems like some kind of copy protection, like implied earlier in this thread. I hope it's not. These are the originals...

Can not create temp file---- Error code:-2147215357 [CRSDK00000615] Error code name:internal

Hello,
While exporting Export reporting from BI4 getting exception
Can not create temp file---- Error code:-2147215357 [CRSDK00000615] Error code name:internal
In Trace Log I am getting
com.crystaldecisions.xml.serialization.XMLWriter||Failed to create an object instance for CrystalReports.TextObjectFormat
java.util.MissingResourceException: Can't find resource for bundle java.util.PropertyResourceBundle, key CrystalReports.TextObjectFormat
at java.util.ResourceBundle.getObject(ResourceBundle.java:374)
at java.util.ResourceBundle.getString(ResourceBundle.java:334)
I tried following solution according to the all forums but still issue exist.
Done changes mention in KB article In <Installation-dir-of-BO>\Common\4.0\java\CRConfig.XML we have to increase the JAVA heap MIN and Max size
<JVMMaxHeap>64000000</JVMMaxHeap> <JVMMinHeap>32000000</JVMMinHeap>
Increase the value in the ReportApplicationServer Services in the CMC for "Number of database records to read when previewing or refreshing a report". The value -1 is for unlimited records but not recommended for performance.
Check for temporary read write permission on server
Using SDK library from C:\Program Files (x86)\SAP Business Objects\SAP BusinessObjects Enterprise XI 4.0\java\lib
Can you please let me know is there anything missing.

Hi,
We face the same problem with some BI4 reports.
The same report works well with the "Crystal Reports Viewers API", as used in Infoview, but not with the "Report Application Server (RAS) API".
This error appears after some time working on a report. If we reproduce the same report, but from zero, no problem.
Hope it can help.
Ludovic.

Error Code-50 when trying to copy or delete files on external hard drive

Hi,
I am in process of backing up large HD video files from one external hard drive to another using Carbon Copy Cloner software. I get this error message: "This file or folder is sitting on a bad section of hard disk media and is unrecoverable. Delete this item (i.e. in the Finder) and restore it from a known good backup, then try the backup task again."
I have tried to delete that folder in Finder and I get error code-50, it won't delete.
I tried to delete individual files within folder - error code 50.
I tried to "replace" folder with good copy from other external hard drive. Error code-50
I tried to "repair disk" in Disk Utility application and I get error message "cannot unmount disk."
NOTE: the files in this folder are .m2ts format, from an old PC. I converted then into .mov but want to retain originals.
NOTE: I was successfully able to copy the folder from a 3rd external hard drive to the backup disk without a problem (which makes me think it's not the files/folder but has to do with the actual disk.), but cannot fix it on the original (source) disk.
Bad disk?
Bad files?
How do you fix a "bad section of a hard disk"?
Might reformatting the entire disk fix the "bad section"?
Any advice welcomed and appreciated!
Thank you!

Hi
Error -50 paramErr Error in user parameter list
Can there be any external hard disks - if so How is/are it/they formatted ? Must be Mac OS Extended (hfs) if used for Video.
UNIX/DOS/FAT32/Mac OS Exchange - works for most but not for VIDEO.
What this means in Your situation is above me.
• free space on internal boot hard disk? How much ?
Video codec
• streamingDV, AIC etc. (not .avi, .mp4, .m4v, .wmv etc as they are containers not codecs)
Pictures
• in what format ? .jpg, .bmp, .tif, else ?
Audio
• from where/what format ? iTunes, .avi, .mp3, .aiff, else ?
The "com.apple.iMovie.plist" file
Many users has not observed that there are TWO libraries.
• Library - at root level
• Library - in user/account folder - THIS IS THE ONE to look into
from Luke Burns
I fixed the problem.. but it was very, very strange. I had a very long section for credits and set the line spacing to 1.0.. for some reason this caused it. I removed it, and it worked fine. I put it back, and I couldn't preview or play the video.
I don't know why that could cause that big of a problem, but it did..
Klaus1
You need more free space on your hard drive.
jonorparkerjon
After phone support from apple I ended up creating a new project and adding all 117 clips back in individually till I found out what clips flagged and would not allow me to export. I had 3 I deleted and replaced and everything works now 1hr after tedious work....
Where do Your material come from
• Camera
• External hard disk
• USB-memory
And all are connected so that iMovie can find it ?
Yours Bengt W

I am trying to copy iphoto library Error Code 36

I am trying to copy iphoto library from one hard drive to another and get the message The Finder can’t complete the operation because some data in “iPhoto Library” can’t be read or written. (Error code -36) = Need to back iy up or my wife will kill me. thanks for help

Here is something you can try:
Obtain iPhoto Library Manager. It is an inexpensive program you can download. Run it and tell it to REBUILD your iPhoto Library from your original iPhoto Library. It will create a NEW file in a destination that you specify (you can specify the other hard drive and thus get a backup all at once) and try to recreate the iPhoto Library based on the info from your original one. Depending on the problem causing your -36 file error, iPhoto Library Manager may (a) successfully recreate your entire photo library successfully on the other hard drive; (b) recreate all of your original photo library except for the part that is damaged; or (c) won't be able to finish at all if the disk problems are severe enough.
If (c) happens, you may have to copy the actual photos individually out of the iPhoto Library and into a new iPhoto Library. The actual photos are inside the iPhoto Library. You can find them by control-click once on the iPhoto Library and select Show Package Contents. The folder called Originals or Masters has the photos (originals) and a folder called Modified or Previews has the edited photos. I suggest COPYING (not moving) these folders to the external drive. You will then need to re-import the actual photos inside these folders to a new iPhoto Library.

Error code = 0x40010015 when trying to open PDF in PS CS3

Greetings:
I'm having a problem opening a PDF file in Photoshop.
This is the error message:
Error Opening the Portable Document File
(PDF) Document. Error Code =
0x40010015
Searching the Adobe Forums, Knowledge Base, and even Google has turned up no results. Any idea what the problem may be?
My process has been taking a PDF file created from QuarkXpress (6.5) and opening it in Acrobat Pro (8.1.2) and doing a save as and replacing the current pdf. Then I open this new PDF file in Photoshop CS3 (10.0.1) and apply actions. No problems. Then I encountered this one file that won't open in Photoshop, but will open in Acrobat, Preview, Illustrator. I get the following error message.
I'm using a G5 PowerPC Mac (4 x 2.5 GHz Processor) with 6.5 GB DDR2 SDRAM for memory. Mac OS X version 10.4.11 (haven't switched to Leopard yet) Adobe Creative Suite 3 Design Premium software package.
Thanks,
Randy Hinderks
Art Director / Video Editor
On-Purpos, Inc.

I receive an error code = 0x40010015 when trying to open a PDF in Photoshop CS3 for windows.
I do not have Illustrator to open and re-save as the forum discussion indicated.
Is there another way to open a PDF with this error code? I work with Quark, Photoshop and Publisher
MartyMag22

Failed AAF Import from PT: Error Code -39, bad references. Any clues?

I received an AAF file (and associated 96khz 24bit aif's) exported from ProTools. Several of the aifs are 28kb files that Finder's Get Info says have a duration of 0:00. Earlier on in the project I successfully imported an OMF export; this AAF was updating four tracks.
When I important the aaf into Logic—whether into a new or pre-existing project—regions appear at what look to be the right time indexes, and they appear to be the right length, but the waveform preview never fills in. All of the regions except one appear to be tied to a single audio file; the many of those very short files are apparently in a "Sample accurate edit.2" region that I can't find elsewhere in the project.
When I try to play the project, I quickly get a popup stating: "Error code -39 was returned by the Audio driver."
It looks like a similar issue was raised here: https://logicprohelp.com/forum/viewtopic.php?f=1&t=88286
Any idea what's going on here? Is this a Logic importing AAF issue, a PT exporting AAF issue, or something else?

One of the problems PT has.. is that it has issues exporting AAF files if the file name or path.. contains what Avid describes as "Foreign Characters" (Or to be more accurate... They spell it 'Foreing Characters'!!)
http://avid.force.com/pkb/articles/en_US/Troubleshooting/en369691?retURL=%2Farti cles%2Fen_US%2Ffaq%2Fen414251&popup=true
This particular 'feature' has been one of many long standing bugs with PT and AAF exporting... Just do a quick google for "failed aaf export from Pro tools" without the quotes.. to see what I mean....

Error: The AcquireConnection method call to the connection manager failed with error code 0xC0202009 using DB2 connection

I have a SSIS project that I am newly running on the SQL server (2005) . It was previously run on my PC. I am importing data from a DB2 server to the SQL server.
I am in the SA group on the server
My connection to DB2 works
When open the package and run it in preview mode, I can retrieve the data.
When I execute the package I get the below errors:
[MIDAS OLE DB Source [1]] Error: The AcquireConnection method call to the connection manager "NGMDSPA.alharris" failed with error code 0xC0202009.
[DTS.Pipeline] Error: component "MIDAS OLE DB Source" (1) failed validation and returned error code 0xC020801C.
What I have already done that has not worked:
The original Protection level was set to EncryptSensitiveWithPassword.
I have reset the Package Password.
I have set the protection level to DontSaveSensitive
I saved the package on the server and set a Package Password.
I created a new package, set the Protection level to DontSaveSensitive, set a package password in a configuration file using the Package Configuration Wizard.
Error continues

Yes. The Drivers are installed and I have a successfull connection. I am trouble shooting the issue on the server in BIDS. I can connect to the DB2 server via the Connectionmanager. I can also preview the data in the OLE
DB source connection. Therefore I know that I have a proper connection
If you're setting option as DontSaveSensitive then you need to pass the connection information from configuration file/ config table. Otherwise it wont be able to use it for connecting to your source/destination servers. This is the recommended way as it
will enable you to change connection info at runtime.
If you want connection info to persist you need to use protection level as EncryptSensitiveUsingUserKey or EncryptSensitiveUsingPassword and set a password.
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

No database connector has been specified - Error code:-2147467259 error

Hi,
Iu2019m trying to populate a report and preview it using JRC. Iu2019m using the JRC jar files versions from CR XI R2 SP4. I have created a report using locale data source xml file and scheme file. I can preview the report from Crystal Report Designer without any probelm. When I try to preview the same layout using my Java application I get the error " No database connector has been specified.---- Error code:-2147467259 Error code name:failed " when I try to set the table location (reportClientDoc.getDatabaseController().setTableLocation(tables.getTable(i),table);) I even get this when I try to set the date source (reportClientDoc.getDatabaseController().setDataSource(xmlDataSet, " FND_SESSION_REP/FNDSESSION", "FND_SESSION_REP/FNDSESSION");) I tried shifting the order of setDataSource and setTableLocation but that didnu2019t help as well.
Can you please help me?
Thanks you in advance.
Regards,
Chanaka
Code to set connection info
public void setDBLogonXML(String xmlFilePath, String xsdFilePath)
 final String SERVER_TYPE = "XML";
 final String CONVERT_MULTIVALUE_TO_TABLE="false";
 final String DATABASE_DLL = "crdb_xml.dll";
 try {
 Tables tables = reportClientDoc.getDatabaseController().getDatabase().getTables();
 //Set the datasource for all main report tables.
 for (int i = 0; i < tables.size(); i++) {
 ITable table = tables.getTable(i);
 //Keep existing name and alias.
 table.setName(table.getName());
 table.setQualifiedName(table.getQualifiedName());
 table.setAlias(table.getAlias());
 //Change connection information properties.
 IConnectionInfo connectionInfo = table.getConnectionInfo();
 //Set new table connection property attributes.
 PropertyBag propertyBag = new PropertyBag();
 propertyBag.put("Server Type", SERVER_TYPE);
 propertyBag.put("Database DLL",DATABASE_DLL );
 propertyBag.put("Local XML File",xmlFilePath);
 propertyBag.put("Local Schema File",xsdFilePath);
 String conString = "Local XML File=s("+xmlFilePath+");Local Schema File=s("+xsdFilePath+")";
 propertyBag.put("Connection String",conString);
 connectionInfo.setAttributes(propertyBag);
 table.setConnectionInfo(connectionInfo);
 //Update old table in the report with the new table.
 reportClientDoc.getDatabaseController().setTableLocation(tables.getTable(i),table);
 catch(ReportSDKException ex) {
 System.out.println(ex);
 catch(Exception ex) {
 System.out.println(ex);
Main programu2026..
setDBLogonXML("D:\\Reports\\Current Sessions.xml","D:\\Reports\\FndSessionRep.xsd");
 xmlDataSet = new XMLDataSet(new ByteArray(xmlFile), new ByteArray(xsdFile));
 reportClientDoc.getDatabaseController().setDataSource(xmlDataSet, "FND_SESSION_REP/FNDSESSION", "FND_SESSION_REP/FNDSESSION");
Error Stack
- JRCAgent1 detected an exception: No database connector has been specified.
 at com.crystaldecisions.sdk.occa.report.lib.ReportSDKException.throwReportSDKException(Unknown Source)
 at com.businessobjects.reports.sdk.b.e.a(Unknown Source)
 at com.businessobjects.reports.sdk.b.e.a(Unknown Source)
 at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)
 at com.crystaldecisions.proxy.remoteagent.y.a(Unknown Source)
 at com.crystaldecisions.proxy.remoteagent.r.a(Unknown Source)
 at com.crystaldecisions.sdk.occa.report.application.cf.a(Unknown Source)
 at com.crystaldecisions.sdk.occa.report.application.z.a(Unknown Source)
 at com.crystaldecisions.sdk.occa.report.application.ak.if(Unknown Source)
 at com.crystaldecisions.sdk.occa.report.application.ad.int(Unknown Source)
 at com.crystaldecisions.sdk.occa.report.application.bk.for(Unknown Source)
 at com.crystaldecisions.proxy.remoteagent.v.a(Unknown Source)
 at com.crystaldecisions.proxy.remoteagent.v.if(Unknown Source)
 at com.crystaldecisions.sdk.occa.report.application.DatabaseController.a(Unknown Source)
 at com.crystaldecisions.sdk.occa.report.application.DatabaseController.setTableLocation(Unknown Source)
 at com.crystaldecisions.reports.sdk.DatabaseController.setTableLocation(Unknown Source)
 at jrc_xml_test_app_01.testDlg.setDBLogonXML(testDlg.java:378)
 at jrc_xml_test_app_01.testDlg.jButton3ActionPerformed(testDlg.java:117)
 at jrc_xml_test_app_01.testDlg.access$200(testDlg.java:23)
 at jrc_xml_test_app_01.testDlg$3.actionPerformed(testDlg.java:67)
 at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1849)
 at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2169)
 at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
 at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
 at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
 at java.awt.Component.processMouseEvent(Component.java:5501)
 at javax.swing.JComponent.processMouseEvent(JComponent.java:3135)
 at java.awt.Component.processEvent(Component.java:5266)
 at java.awt.Container.processEvent(Container.java:1966)
 at java.awt.Component.dispatchEventImpl(Component.java:3968)
 at java.awt.Container.dispatchEventImpl(Container.java:2024)
 at java.awt.Component.dispatchEvent(Component.java:3803)
 at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4212)
 at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3892)
 at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3822)
 at java.awt.Container.dispatchEventImpl(Container.java:2010)
 at java.awt.Window.dispatchEventImpl(Window.java:1778)
 at java.awt.Component.dispatchEvent(Component.java:3803)
 at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
 at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
 at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
 at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:153)
 at java.awt.Dialog$1.run(Dialog.java:525)
 at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
 at java.awt.EventQueue.dispatchEvent(EventQueue.java:461)
 at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
 at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
 at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
 at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
 at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: No database connector has been specified.---- Error code:-2147467259 Error code name:failed
- JRCAgent1 received request: setDataSourceRequest
- command SETUP: Create Data Connection
- command PERFORM: Create Data Connection
- -- command is undoable -> purge redo stack
- command SETUP: Set Data Connection Property
com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: No database connector has been specified.---- Error code:-2147467259 Error code name:failed
 at com.crystaldecisions.sdk.occa.report.lib.ReportSDKException.throwReportSDKException(Unknown Source)
 at com.businessobjects.reports.sdk.b.e.a(Unknown Source)
 at com.businessobjects.reports.sdk.b.e.a(Unknown Source)
- command PERFORM: Set Data Connection Property
 at com.businessobjects.reports.sdk.b.e.a(Unknown Source)
- -- command is NOT UNDOABLE -> purge undo stack
 at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)
- --- Purging command Create Data Connection
 at com.crystaldecisions.proxy.remoteagent.y.a(Unknown Source)
- command SETUP: Set Data Connection Property
 at com.crystaldecisions.proxy.remoteagent.r.a(Unknown Source)
- command PERFORM: Set Data Connection Property
 at com.crystaldecisions.sdk.occa.report.application.cf.a(Unknown Source)
- JRCAgent1 detected an exception: No database connector has been specified.
 at com.crystaldecisions.sdk.occa.report.application.DatabaseController.a(Unknown Source)
 at com.crystaldecisions.sdk.occa.report.lib.ReportSDKException.throwReportSDKException(Unknown Source)
 at com.crystaldecisions.sdk.occa.report.application.DatabaseController.setDataSource(Unknown Source)
 at com.businessobjects.reports.sdk.b.e.a(Unknown Source)
 at com.crystaldecisions.reports.sdk.DatabaseController.setDataSource(Unknown Source)
 at com.businessobjects.reports.sdk.b.e.a(Unknown Source)
 at jrc_xml_test_app_01.testDlg.jButton3ActionPerformed(testDlg.java:121)
 at com.businessobjects.reports.sdk.b.e.a(Unknown Source)
 at jrc_xml_test_app_01.testDlg.access$200(testDlg.java:23)
 at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)
 at jrc_xml_test_app_01.testDlg$3.actionPerformed(testDlg.java:67)
 at com.crystaldecisions.proxy.remoteagent.y.a(Unknown Source)
 at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1849)
 at com.crystaldecisions.proxy.remoteagent.r.a(Unknown Source)
 at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2169)
 at com.crystaldecisions.sdk.occa.report.application.cf.a(Unknown Source)
 at com.crystaldecisions.sdk.occa.report.application.DatabaseController.a(Unknown Source)
 at com.crystaldecisions.sdk.occa.report.application.DatabaseController.setDataSource(Unknown Source)
 at com.crystaldecisions.reports.sdk.DatabaseController.setDataSource(Unknown Source)
 at jrc_xml_test_app_01.testDlg.jButton3ActionPerformed(testDlg.java:121)
 at jrc_xml_test_app_01.testDlg.access$200(testDlg.java:23)
 at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
 at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
 at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
 at java.awt.Component.processMouseEvent(Component.java:5501)
 at javax.swing.JComponent.processMouseEvent(JComponent.java:3135)
 at java.awt.Component.processEvent(Component.java:5266)
 at java.awt.Container.processEvent(Container.java:1966)
 at java.awt.Component.dispatchEventImpl(Component.java:3968)
 at jrc_xml_test_app_01.testDlg$3.actionPerformed(testDlg.java:67)
 at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1849)
 at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2169)
 at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
 at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
 at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
 at java.awt.Component.processMouseEvent(Component.java:5501)
 at javax.swing.JComponent.processMouseEvent(JComponent.java:3135)
 at java.awt.Container.dispatchEventImpl(Container.java:2024)
 at java.awt.Component.processEvent(Component.java:5266)
 at java.awt.Component.dispatchEvent(Component.java:3803)
 at java.awt.Container.processEvent(Container.java:1966)
 at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4212)
 at java.awt.Component.dispatchEventImpl(Component.java:3968)
 at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3892)
 at java.awt.Container.dispatchEventImpl(Container.java:2024)
 at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3822)
 at java.awt.Component.dispatchEvent(Component.java:3803)
 at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4212)
 at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3892)
 at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3822)
 at java.awt.Container.dispatchEventImpl(Container.java:2010)
 at java.awt.Window.dispatchEventImpl(Window.java:1778)
 at java.awt.Component.dispatchEvent(Component.java:3803)
 at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
 at java.awt.Container.dispatchEventImpl(Container.java:2010)
 at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
 at java.awt.Window.dispatchEventImpl(Window.java:1778)
 at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
 at java.awt.Component.dispatchEvent(Component.java:3803)
 at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:153)
 at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
 at java.awt.Dialog$1.run(Dialog.java:525)
 at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
 at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
 at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
 at java.awt.EventQueue.dispatchEvent(EventQueue.java:461)
 at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
 at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
 at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:153)
 at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
 at java.awt.Dialog$1.run(Dialog.java:525)
 at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
 at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
No database connector has been specified.
 at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
 at java.awt.EventQueue.dispatchEvent(EventQueue.java:461)
 at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
 at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
 at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
 at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
 at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)

Post Author: ililal
CA Forum: Data Connectivity and SQL
I spoke directly with Business Objects. They said,"Sun Application Server 8.2 is not supported."

Error code = 0x20030055

Im trying to open PDF files into Photohop cs3 but it comes up with error code = 0x20030055 and i cant find anything online to help me fix this error, thanks

is this any help?
Adobe Photoshop Version: 10.0 (10.0x20070321 [20070321.m.1480 16:39:00 cutoff; m branch])
Operating System: Windows XP
Version: 5.1 Service Pack 3
System architecture: Intel CPU Family:6, Model:10, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, HyperThreading
Physical processor count: 2
Logical processor count: 4
Processor speed: 0 MHz
Built-in memory: 6036 MB
Free memory: 3291 MB
Memory available to Photoshop: 3255 MB
Memory used by Photoshop: 55 %
Image cache levels: 6
Serial number: Not a Serialized Product
Application folder: C:\Users\laukye\AppData\Local\Temp\RarSFX16\
Temporary file path: C:\Users\laukye\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
Startup, 910.6G, 786.6G free
Primary Plug-ins folder: C:\Users\laukye\AppData\Local\Temp\RarSFX16\Plug-Ins\
Additional Plug-ins folder: not set
Installed plug-ins:
   ADM 3.10x21
   ASDStrm 1.03x2
   Accented Edges 10.0 (x101)
   Angled Strokes 10.0 (x101)
   Average 10.0 (10.0x20070321 [20070321.m.1480 16:39:00 cutoff; m branch])
   BMP 10.0 (10.0x20070321 [20070321.m.1480 16:39:00 cutoff; m branch])
   Bas Relief 10.0 (x101)
   Chalk & Charcoal 10.0 (x101)
   Charcoal 10.0 (x101)
   Chrome 10.0 (x101)
   Cineon 10.0 (10.0x20070321 [20070321.m.1480 16:39:00 cutoff; m branch])
   Clouds 10.0 (10.0x20070321 [20070321.m.1480 16:39:00 cutoff; m branch])
   Color Halftone 10.0 (10.0x20070321 [20070321.m.1480 16:39:00 cutoff; m branch])
   Colored Pencil 10.0 (x101)
   CompuServe GIF 10.0 (10.0x20070321 [20070321.m.1480 16:39:00 cutoff; m branch])
   Contact Sheet II 10.0 (10.0x20070321 [20070321.m.1480 16:39:00 cutoff; m branch])
   Conté Crayon 10.0 (x101)
   Craquelure 10.0 (x101)
   Crop and Straighten Photos 10.0 (10.0x20070321 [20070321.m.1480 16:39:00 cutoff; m branch])
   Crop and Straighten Photos Filter 10.0 (10.0x20070321 [20070321.m.1480 16:39:00 cutoff; m branch])
   Crosshatch 10.0 (x101)
   Crystallize 10.0 (10.0x20070321 [20070321.m.1480 16:39:00 cutoff; m branch])
   Cutout 10.0 (x101)
   Dark Strokes 10.0 (x101)
   De-Interlace 10.0 (10.0x20070321 [20070321.m.1480 16:39:00 cutoff; m branch])
   Difference Clouds 10.0 (10.0x20070321 [20070321.m.1480 16:39:00 cutoff; m branch])
   Diffuse Glow 10.0 (x101)
   Displace 10.0 (10.0x20070321 [20070321.m.1480 16:39:00 cutoff; m branch])
   Dry Brush 10.0 (x101)
   Embed Watermark 1.80.67
   Extract 10.0 (10.0x20070321 [20070321.m.1480 16:39:00 cutoff; m branch])
   Extrude 10.0 (10.0x20070321 [20070321.m.1480 16:39:00 cutoff; m branch])
   FastCore Routines 10.0 (10.0x20070321 [20070321.m.1480 16:39:00 cutoff; m branch])
   Fibers 10.0 (10.0x20070321 [20070321.m.1480 16:39:00 cutoff; m branch])
   Film Grain 10.0 (x101)
   Filmstrip 10.0 (10.0x20070321 [20070321.m.1480 16:39:00 cutoff; m branch])
   Filter Gallery 10.0 (x101)
   Fresco 10.0 (x101)
   Generic EPS 10.0
   Glass 10.0 (x101)
   Glowing Edges 10.0 (x101)
   Grain 10.0 (x101)
   Graphic Pen 10.0 (x101)
   HDRMergeUI 10.0
   Halftone Pattern 10.0 (x101)
   Ink Outlines 10.0 (x101)
   Lens Blur 10.0
   Lens Correction 10.0
   Lens Flare 10.0 (10.0x20070321 [20070321.m.1480 16:39:00 cutoff; m branch])
   Lighting Effects 10.0 (10.0x20070321 [20070321.m.1480 16:39:00 cutoff; m branch])
   Liquify 10.0
   MMXCore Routines 10.0 (10.0x20070321 [20070321.m.1480 16:39:00 cutoff; m branch])
   Matlab Operation 10.0 (10.0x20070321 [20070321.m.1480 16:39:00 cutoff; m branch])
   Measurement Core 10.0 (10.0x20070321 [20070321.m.1480 16:39:00 cutoff; m branch])
   Mezzotint 10.0 (10.0x20070321 [20070321.m.1480 16:39:00 cutoff; m branch])
   Mosaic Tiles 10.0 (x101)
   Multiprocessor Support 10.0 (10.0x20070321 [20070321.m.1480 16:39:00 cutoff; m branch])
   NTSC Colors 10.0 (10.0x20070321 [20070321.m.1480 16:39:00 cutoff; m branch])
   Neon Glow 10.0 (x101)
   Note Paper 10.0 (x101)
   Ocean Ripple 10.0 (x101)
   OpenEXR 10.0 (10.0x20070321 [20070321.m.1480 16:39:00 cutoff; m branch])
   PCX 10.0 (10.0x20070321 [20070321.m.1480 16:39:00 cutoff; m branch])
   PNG 10.0 (10.0x20070321 [20070321.m.1480 16:39:00 cutoff; m branch])
   PNG Icons 1.22x1
   Paint Daubs 10.0 (x101)
   Palette Knife 10.0 (x101)
   Patchwork 10.0 (x101)
   Paths to Illustrator 10.0 (10.0x20070321 [20070321.m.1480 16:39:00 cutoff; m branch])
   Pattern Maker 10.0 (10.0x20070321 [20070321.m.1480 16:39:00 cutoff; m branch])
   Photocopy 10.0 (x101)
   PhotomergeUI 10.0 (10.0x20070321 [20070321.m.1480 16:39:00 cutoff; m branch])
   Picture Package 10.0 (10.0x20070321 [20070321.m.1480 16:39:00 cutoff; m branch])
   Picture Package Filter 10.0 (10.0x20070321 [20070321.m.1480 16:39:00 cutoff; m branch])
   Pinch 10.0 (10.0x20070321 [20070321.m.1480 16:39:00 cutoff; m branch])
   Pixar 10.0 (10.0x20070321 [20070321.m.1480 16:39:00 cutoff; m branch])
   Plaster 10.0 (x101)
   Plastic Wrap 10.0 (x101)
   Pointillize 10.0 (10.0x20070321 [20070321.m.1480 16:39:00 cutoff; m branch])
   Polar Coordinates 10.0 (10.0x20070321 [20070321.m.1480 16:39:00 cutoff; m branch])
   Portable Bit Map 10.0 (10.0x20070321 [20070321.m.1480 16:39:00 cutoff; m branch])
   Poster Edges 10.0 (x101)
   Radial Blur 10.0 (10.0x20070321 [20070321.m.1480 16:39:00 cutoff; m branch])
   Radiance 10.0 (10.0x20070321 [20070321.m.1480 16:39:00 cutoff; m branch])
   Read Watermark 1.80.67
   Reticulation 10.0 (x101)
   Ripple 10.0 (10.0x20070321 [20070321.m.1480 16:39:00 cutoff; m branch])
   Rough Pastels 10.0 (x101)
   Save for Web Version 10.0x012
   ScriptingSupport 10.0
   Send Video Preview to Device 10.0 (10.0x20070321 [20070321.m.1480 16:39:00 cutoff; m branch])
   Shear 10.0 (10.0x20070321 [20070321.m.1480 16:39:00 cutoff; m branch])
   Smart Blur 10.0 (10.0x20070321 [20070321.m.1480 16:39:00 cutoff; m branch])
   Smudge Stick 10.0 (x101)
   Solarize 10.0 (10.0x20070321 [20070321.m.1480 16:39:00 cutoff; m branch])
   Spatter 10.0 (x101)
   Spherize 10.0 (10.0x20070321 [20070321.m.1480 16:39:00 cutoff; m branch])
   Sponge 10.0 (x101)
   Sprayed Strokes 10.0 (x101)
   Stained Glass 10.0 (x101)
   Stamp 10.0 (x101)
   Sumi-e 10.0 (x101)
   Targa 10.0 (10.0x20070321 [20070321.m.1480 16:39:00 cutoff; m branch])
   Texturizer 10.0 (x101)
   Tiles 10.0 (10.0x20070321 [20070321.m.1480 16:39:00 cutoff; m branch])
   Torn Edges 10.0 (x101)
   Twain Acquire 10.0 (10.0x20070321 [20070321.m.1480 16:39:00 cutoff; m branch])
   Twain Select 10.0 (10.0x20070321 [20070321.m.1480 16:39:00 cutoff; m branch])
   Twirl 10.0 (10.0x20070321 [20070321.m.1480 16:39:00 cutoff; m branch])
   Underpainting 10.0 (x101)
   Vanishing Point 10.0
   Variations 10.0 (10.0x20070321 [20070321.m.1480 16:39:00 cutoff; m branch])
   Video Preview 10.0 (10.0x20070321 [20070321.m.1480 16:39:00 cutoff; m branch])
   WIA Support 10.0 (10.0x20070321 [20070321.m.1480 16:39:00 cutoff; m branch])
   Water Paper 10.0 (x101)
   Watercolor 10.0 (x101)
   Wave 10.0 (10.0x20070321 [20070321.m.1480 16:39:00 cutoff; m branch])
   Web Photo Gallery 10.0 (10.0x20070321 [20070321.m.1480 16:39:00 cutoff; m branch])
   Wind 9.0 (9.0x196)
   Wireless Bitmap 10.0 (10.0x20070321 [20070321.m.1480 16:39:00 cutoff; m branch])
   ZigZag 10.0 (10.0x20070321 [20070321.m.1480 16:39:00 cutoff; m branch])
Plug-ins that failed to load: NONE
Installed TWAIN devices:
   WIA-Apple iPod
   WIA-HP Deskjet 3520 series (NET)
   WIA-Apple iPhone
   WIA-F:\
   WIA-Nexus 7
   HP Deskjet 3520 TWAIN

CS4 InDesign Error Code 5 - PLEASE HELP (!)

Hi, please please if any of you have suggestions to solve this problem or ANYTHING, please lend me a hand!
I tried to contact suppose-to-be open 24/7 customer service but on the phone the automated female voice tells you it is actually Mon-Friday. LOL.
OK, here is my problem.
My computer had to be rebooted yesterday morning, nothing unusual as it often happens.
Rebooted my Mac and tried uploading few InDesign files later on in the day.
Other files that were on before rebooting restored themselves but then an Error message came up with one file,
"Cannot open "file name.indd".
The file "file name.indd" is damaged and cannot be recovered (Error code 5)"
I am one of those Ctrl+S freaks so my work was saved before the reboot.
If the problem is within the restoring file system then why are all the other files safe and sound?
After intense googling on the matter, I suspect that it might be the size of the file.
I read a few cases where cos the file was too big, they had the same Error code 5 and lost them.
127.5MB is the size of the file but there have been no warnings previously nor was I informed that the size would cause a FATAL problem like this.
Anyway I tried out about all of the potential solutions given on Google.
-Quit and restarted InDesign.
-Rebooted Mac.
-Moved the file in to a portable hard drive and tried opening from there.
-Opened from other programs such as Photoshop etc.
-Created a new computer account and re-installed InDesign.
-Deleted and recreated InDesign Preference.
-Tried it the next day.
PLEASE help me...
That file happened to be THE MOST IMPORTANT one out of them all.
I spent few weeks working on that with hardly any rest or sleep.
The deadline is too close for comforts....please help.

Gobdan wrote:
Copy + Paste or Dragging them on to the page.
Does this make the file size too big to handle cos of all the links?
If so, why has it happened now?
Why has it not happened instantly or gave me a warning about the file size?
Thank you for the feedback, I really apprecaite it.
Even though it may mean my file's lost forever at least I know better now. Thanks.
There are no links when you copy/paste. When you say drag, do you mean from Bridge or Finder/Explorer, or from Photshop? Dragging from Photoshop is the same as copy/paste. All you get is low-res screen preview embedded in the document.
I suspect this doc may be as large as it is because it hase a lot of useless change information in it. ID save all the change info each time you hit save. When the doc is closed, that information is still retained, but is no longer usable. To reduce file size you should do a "Save As."
Have you tried deleting the recovery information and opeing the file from the menu? I don't think it will help, but it might.
Peter

How do I fix this error code

• fbl_impressive Core 10074 - Error 0xc1900107
Cannot upgrade to the FAST track latest install. Keep getting this error code?
Anne

DS
Try the ISO'S
Windows 10 build 10074 ISOs are available for download:
Pro from Windows Insiders:
http://windows.microsoft.com/en-us/windows/preview-iso-updat…
Enterprise from Evaluation Center:
https://www.microsoft.com/en-us/evalcenter/evaluate-windows-…
Upgrades should go out via Windows Update soon. The ADK is slightly delayed, should be available late tonight or tomorrow.
Wanikiya and Dyami--Team Zigzag

While adding/Changing member in planning it gives the error "The SQL operation failed with an error code: 0"

Hi, While adding/Changing member in planning it gives the error "The SQL operation failed with an error code: 0" and not allowing any of the changes. I am not able to open the forms giving the error as "Fiscal Days Input - is invalid". Interestingly one form was opening, when the Page selection is changed it also started giving error as like "Fisacal Days Input(form name) - is invalid check log for details". Pls advice us that what is this error and how to resolve this. And Which log is to be referred for the details. Thanks Ravi

If a form is invalid it generally means that one of the dimension references is missing. Can you get in to edit the form? If you can, see if you can preview it. I suspect you will not be able to. If not, check all dimension boxes have at least one member against them. If you have multiple rows and/or columns check all of them too. I've had a couple of forms in dev "drop" a dimension reference but only once or twice so not enough to reproduce or find out what is causing it. Each time I got the "form invalid" error message and managed to fix it. Hope this helps.

Preverification failed with error code 1. BUILD FAILED

Hallo Oracle,
Am learning my first J2me application and when i build it am getting this error. can some one help me understand what it means
Created dir: C:\Users\Dell\Documents\NetBeansProjects\watsdownapp\build\preverifysrc
Copying 1957 files to C:\Users\Dell\Documents\NetBeansProjects\watsdownapp\build\preverifysrc
Created dir: C:\Users\Dell\Documents\NetBeansProjects\watsdownapp\build\preverified
Preverifying 1957 file(s) into C:\Users\Dell\Documents\NetBeansProjects\watsdownapp\build\preverified directory.
Error preverifying class com.sun.activation.registries.MailcapFile
 VERIFIER ERROR com/sun/activation/registries/MailcapFile
.<init>(Ljava/lang/String;)V:
Cannot find class java/util/Map
C:\Users\Dell\Documents\NetBeansProjects\watsdownapp\nbproject\build-impl.xml:431: Preverification failed with error code 1.
BUILD FAILED (total time: 25 seconds)
this is the contents of build-impx.xml
<?xml version="1.0" encoding="UTF-8"?>

<project name="watsdownapp-impl" default="jar" basedir="..">
 
 <target name="pre-load-properties">
 <property file="nbproject/private/private.properties"/>
 <property name="user.properties.file" location="${netbeans.user}/build.properties"/>
 <available property="user.properties.file.exists" file="${user.properties.file}"/>
 </target>
 <target name="exists.config.active" unless="config.active">
 <echo level="warning" message="Active configuration (config.active property) is not set - using default."/>
 <property value="" name="config.active"/>
 </target>
 <target name="exists.netbeans.user" unless="netbeans.user">
 <echo level="warning" message="NetBeans IDE user directory (netbeans.user property) is not set. By specifying this property many properties required by the project will be automatically evaluated (e.g.: ant-ext library home, ...). You could also open this project in the NetBeans IDE - in this case this property would be set automatically."/>
 </target>
 <target name="exists.user.properties.file" unless="user.properties.file.exists">
 <echo level="warning" message="User properties file (user.properties.file) property is not set. By specifying this property many properties required by the project will be automatically evaluated (e.g.: libraries, platforms, ...)."/>
 </target>
 <target name="load-properties" depends="pre-load-properties,exists.config.active,exists.netbeans.user,exists.user.properties.file">
 <loadproperties srcfile="nbproject/project.properties">
 <filterchain>
 <containsregex pattern="^configs\.${config.active}\.(.*)" replace="\1"/>
 <concatfilter prepend="nbproject/project.properties"/>
 <containsregex pattern="^platform.active=|^deployment.method=|^deployment.instance="/>
 </filterchain>
 </loadproperties>
 <property name="deployment.instance" value="default"/>
 <loadproperties srcfile="${user.properties.file}">
 <filterchain>
 <replaceregex pattern="^platforms\.${platform.active}\." replace="platform."/>
 <replaceregex pattern="^deployment\.${deployment.method}\.scriptfile=" replace="deployment.scriptfile="/>
 <replaceregex pattern="^deployments\.${deployment.method}\.${deployment.instance}\.([^=]+)=" replace="\1="/>
 </filterchain>
 </loadproperties>
 <loadproperties srcfile="nbproject/project.properties">
 <filterchain>
 <containsregex pattern="^configs\.${config.active}\.(.*)" replace="\1"/>
 <concatfilter prepend="nbproject/project.properties"/>
 </filterchain>
 </loadproperties>
 </target>
 
 <target name="exists.platform.active" unless="platform.active">
 <echo level="warning" message="Active platform (platform.active property) in not set. If you set this and user.properties.file property, many properties required by the project will be automatically evaluated (e.g.: platform home, platform classpath, ...)."/>
 </target>
 <target name="exists.platform.configuration" unless="platform.configuration">
 <echo level="warning" message="Platform configuration (platform.configuration) is not set. Using default (CLDC-1.0) configuration."/>
 <property name="platform.configuration" value="CLDC-1.0"/>
 </target>
 <target name="exists.platform.profile" unless="platform.profile">
 <echo level="warning" message="Platform profile (platform.profile) is not set. Using default (MIDP-1.0) profile."/>
 <property name="platform.profile" value="MIDP-1.0"/>
 </target>
 <target name="basic-init" depends="exists.platform.active,exists.platform.configuration,exists.platform.profile">
 <fail unless="libs.j2me_ant_ext.classpath">Classpath to J2ME Ant extension library (libs.j2me_ant_ext.classpath property) is not set. For example: location of mobility/modules/org-netbeans-mobility-antext.jar file in the IDE installation directory.</fail>
 <fail unless="platform.home">Platform home (platform.home property) is not set. Value of this property should be ${platform.active.description} emulator home directory location.</fail>
 <fail unless="platform.bootclasspath">Platform boot classpath (platform.bootclasspath property) is not set. Value of this property should be ${platform.active.description} emulator boot classpath containing all J2ME classes provided by emulator.</fail>
 <fail unless="src.dir">Must set src.dir</fail>
 <fail unless="build.dir">Must set build.dir</fail>
 <fail unless="dist.dir">Must set dist.dir</fail>
 <fail unless="dist.jar">Must set dist.jar</fail>
 <property name="javac.source" value="1.3"/>
 <property name="javac.target" value="1.1"/>
 <property name="javac.encoding" value="${file.encoding}"/>
 <property name="deployment.number" value="0.0.1"/>
 <property name="deployment.counter" value="000002"/>
 <condition property="no.deps">
 <istrue value="${no.dependencies}"/>
 </condition>
 <condition property="no.preprocess">
 <isfalse value="${use.preprocessor}"/>
 </condition>
 <condition property="no.javadoc.preview">
 <isfalse value="${javadoc.preview}"/>
 </condition>
 <condition property="filter.excludes.evaluated" value="${filter.excludes},${filter.more.excludes},**/*Test.java,**/test,**/test/**">
 <istrue value="${filter.exclude.tests}"/>
 </condition>
 <property name="filter.excludes.evaluated" value="${filter.excludes},${filter.more.excludes}"/>
 <condition property="deployment.do.override.jarurl" value="">
 <istrue value="${deployment.override.jarurl}"/>
 </condition>
 <condition property="config.active.name" value="DefaultConfiguration">
 <length string="${config.active}" trim="true" length="0"/>
 </condition>
 <property name="config.active.name" value="${config.active}"/>
 <taskdef resource="org/netbeans/mobility/antext/defs.properties">
 <classpath>
 <pathelement path="${libs.j2me_ant_ext.classpath}"/>
 </classpath>
 </taskdef>
 <condition property="skip.deployment">
 <equals arg1="${deployment.method}" arg2="NONE" casesensitive="false" trim="true"/>
 </condition>
 <condition property="app-version.autoincrement.trigger">
 <istrue value="${app-version.autoincrement}"/>
 </condition>
 <condition property="debug.timeout" value="30000">
 <or>
 <equals arg1="${debugger.timeout}" arg2="" trim="true"/>
 <not>
 <isset property="debugger.timeout"/>
 </not>
 </or>
 </condition>
 <property name="debug.timeout" value="${debugger.timeout}"/>
 <nb-overrideproperty name="buildsystem.baton" value="${src.dir}"/>
 </target>
 
 <target name="cldc-pre-init">
 <condition property="cldc-platform.trigger">
 <equals arg1="CLDC" arg2="${platform.trigger}" casesensitive="false"/>
 </condition>
 </target>
 <target name="cldc-init" depends="cldc-pre-init" if="cldc-platform.trigger">
 <property name="preverify.sources.dir" location="${build.dir}/preverifysrc"/>
 <property name="manifest.build.file" location="${build.dir}/manifest.mf"/>
 <property name="platform.device" value=""/>
 <property name="dist.jad.url" value="file://"/>
 <property name="run.cmd.options" value=""/>
 <condition property="evaluated.run.security.domain" value="">
 <isfalse value="${run.use.security.domain}"/>
 </condition>
 <property name="evaluated.run.security.domain" value="${run.security.domain}"/>
 <condition property="override.jarurl.trigger">
 <and>
 <istrue value="${cldc-platform.trigger}"/>
 <istrue value="${deployment.override.jarurl}"/>
 </and>
 </condition>
 <property name="deployment.jad" location="${dist.dir}/${dist.jad}"/>
 <property name="deployment.jar" location="${dist.dir}/${dist.jar}"/>
 <property name="deployment.dir" location="${dist.dir}"/>
 <patternset id="deployment.patternset">
 <include name="${dist.jad}"/>
 <include name="${dist.jar}"/>
 </patternset>
 </target>
 
 <target name="cdc-init">
 <condition property="cdc-platform.trigger">
 <equals arg1="CDC" arg2="${platform.trigger}" casesensitive="false"/>
 </condition>
 <available file="${manifest.file}" property="manifest.available"/>
 <condition property="main.class.applet">
 <equals arg1="${main.class.class}" arg2="applet" casesensitive="false"/>
 </condition>
 <condition property="main.class.xlet">
 <equals arg1="${main.class.class}" arg2="xlet" casesensitive="false"/>
 </condition>
 <condition property="manifest.available+main.class+fat.jar">
 <and>
 <isset property="manifest.available"/>
 <isset property="main.class"/>
 <istrue value="${platform.fat.jar}"/>
 <not>
 <equals arg1="${main.class}" arg2="" trim="true"/>
 </not>
 </and>
 </condition>
 <condition property="manifest.available+main.class">
 <and>
 <isset property="manifest.available"/>
 <isset property="main.class"/>
 <isfalse value="${platform.fat.jar}"/>
 <not>
 <equals arg1="${main.class}" arg2="" trim="true"/>
 </not>
 </and>
 </condition>
 <condition property="application.version.invalid" value="true">
 <equals arg1="${deployment.number}" arg2="" trim="true"/>
 </condition>
 <fail if="application.version.invalid" message="Property deployment.number must not be empty and must contain version in format %d.%d.%d!"/>
 <condition property="sign.jar.trigger" value="true">
 <and>
 <isset property="cdc-platform.trigger"/>
 <istrue value="${sign.enabled}"/>
 </and>
 </condition>
 </target>
 
 <target name="semc-pre-init" if="cdc-platform.trigger">
 <condition property="semc-platform.trigger">
 <equals arg1="semc" arg2="${platform.type}" casesensitive="false"/>
 </condition>
 </target>
 <target name="semc-init" depends="semc-pre-init" if="semc-platform.trigger">
 <condition property="semc.icon.invalid" value="true">
 <or>
 <contains string="${semc.application.icon}" substring="$${"/>
 <equals arg1="${semc.application.icon}" arg2="" trim="true"/>
 </or>
 </condition>
 <condition property="no.certificateorkey" value="true">
 <or>
 <isset property="no.application.uid"/>
 <equals arg1="${semc.certificate.path}" arg2="" trim="true"/>
 <contains string="${semc.certificate.path}" substring="$${semc.certificate.path"/>
 <equals arg1="${semc.private.key.path}" arg2="" trim="true"/>
 <contains string="${semc.private.key.path}" substring="$${semc.private.key.path"/>
 </or>
 </condition>
 <property name="j9.dist" location="${build.dir}/j9/${semc.application.uid}.j9"/>
 <taskdef resource="org/netbeans/modules/j2me/cdc/project/defs.properties">
 <classpath>
 <pathelement path="${libs.cdc-ant-utils.classpath}"/>
 </classpath>
 </taskdef>
 <taskdef resource="org/netbeans/modules/j2me/cdc/project/semc/defs.properties">
 <classpath>
 <pathelement path="${libs.semc-ant-utils.classpath}"/>
 </classpath>
 </taskdef>
 <property name="deployment.dir" location="${dist.dir}"/>
 <patternset id="deployment.patternset">
 <include name="*.sis"/>
 <include name="*.SIS"/>
 </patternset>
 </target>
 
 <target name="savaje-pre-init" if="cdc-platform.trigger">
 <condition property="savaje-platform.trigger">
 <equals arg1="savaje" arg2="${platform.type}" casesensitive="false"/>
 </condition>
 </target>
 <target name="savaje-init" depends="savaje-pre-init" if="savaje-platform.trigger">
 <property name="savaje.application.uid" value="TBD"/>
 <condition property="savaje.bundle.base.invalid" value="true">
 <or>
 <equals arg1="${savaje.bundle.base}" arg2="" trim="true"/>
 <contains string="${savaje.bundle.base}" substring="$${savaje.bundle.base"/>
 </or>
 </condition>
 <condition property="savaje.unsupported.main" value="true">
 <or>
 <equals arg1="${main.class.applet}" arg2="true"/>
 </or>
 </condition>
 <condition property="savaje.icon.invalid" value="true">
 <or>
 <isset property="no.application.uid"/>
 <contains string="${savaje.application.icon}" substring="$${"/>
 <equals arg1="${savaje.application.icon}" arg2="" trim="true"/>
 </or>
 </condition>
 <property name="jnlp.dist" value="${build.dir}/jnlp/bundle.jnlp"/>
 <property name="deployment.dir" location="${dist.dir}"/>
 <patternset id="deployment.patternset">
 <include name="bundle.jnlp"/>
 <include name="bundle.policy"/>
 <include name="lib/*"/>
 </patternset>
 </target>
 
 <target name="sjmc-pre-init" if="cdc-platform.trigger">
 <condition property="sjmc-platform.trigger">
 <equals arg1="sjmc" arg2="${platform.type}" casesensitive="false"/>
 </condition>
 </target>
 <target name="sjmc-init" depends="sjmc-pre-init" if="sjmc-platform.trigger"/>
 
 <target name="ojec-pre-init" if="cdc-platform.trigger">
 <condition property="ojec-platform.trigger">
 <equals arg1="ojec" arg2="${platform.type}" casesensitive="false"/>
 </condition>
 </target>
 <target name="ojec-init" depends="ojec-pre-init" if="ojec-platform.trigger"/>
 
 <target name="cdc-hi-pre-init" if="cdc-platform.trigger">
 <condition property="cdc-hi-platform.trigger">
 <equals arg1="cdc-hi" arg2="${platform.type}" casesensitive="false"/>
 </condition>
 </target>
 <target name="cdc-hi-init" depends="cdc-hi-pre-init" if="cdc-hi-platform.trigger"/>
 
 <target name="nokiaS80-pre-init" if="cdc-platform.trigger">
 <condition property="nokiaS80-platform.trigger">
 <equals arg1="nokiaS80" arg2="${platform.type}" casesensitive="false"/>
 </condition>
 </target>
 <target name="nokiaS80-init" depends="nokiaS80-pre-init" if="nokiaS80-platform.trigger">
 <property name="j9.dist" location="${build.dir}/j9/NOKIA.j9"/>
 <property name="manifest.build.file" location="${build.dir}/manifest.mf"/>
 <condition property="nokia.icon.invalid">
 <or>
 <contains string="${nokiaS80.application.icon}" substring="$${"/>
 <equals arg1="${nokiaS80.application.icon}" arg2="" trim="true"/>
 </or>
 </condition>
 <property name="deployment.dir" location="${dist.dir}"/>
 <patternset id="deployment.patternset">
 <include name="${dist.jar}"/>
 </patternset>
 </target>
 
 <target name="pre-init"/>
 <target name="post-init"/>
 <target name="init" depends="pre-init,load-properties,basic-init,cldc-init,cdc-init,semc-init,savaje-init,sjmc-init,ojec-init,cdc-hi-init,nokiaS80-init,post-init"/>
 
 <target name="conditional-clean-init">
 <uptodate property="no.clean.before.build" targetfile="${build.dir}/.timestamp">
 <srcfiles dir="nbproject">
 <include name="project.properties"/>
 <include name="build-impl.xml"/>
 </srcfiles>
 </uptodate>
 </target>
 <target name="conditional-clean" depends="init,conditional-clean-init" unless="no.clean.before.build" description="Clean project in case its meta information has changed.">
 <antcall target="do-clean" inheritall="true" inheritrefs="true"/>
 </target>
 
 <target name="deps-jar" depends="conditional-clean" unless="no.deps"/>
 
 <target name="pre-preprocess"/>
 <target name="do-preprocess" unless="no.preprocess">
 <fail unless="preprocessed.dir">Must set preprocessed.dir</fail>
 <property name="abilities" value=""/>
 <property name="debug.level" value="debug"/>
 <mkdir dir="${preprocessed.dir}"/>
 <echo message="ignore me" file="${build.dir}/.timestamp"/>
 <nb-prep destdir="${preprocessed.dir}" preprocessfor="${config.active.name},${abilities},DebugLevel=${debug.level}" encoding="${javac.encoding}">
 <fileset dir="${buildsystem.baton}" defaultexcludes="${filter.use.standard}" excludes="${filter.excludes.evaluated}"/>
 </nb-prep>
 <copy todir="${preprocessed.dir}">
 <fileset dir="${buildsystem.baton}" defaultexcludes="${filter.use.standard}" excludes="${filter.excludes.evaluated},${build.classes.excludes}"/>
 </copy>
 <nb-overrideproperty name="buildsystem.baton" value="${preprocessed.dir}"/>
 </target>
 <target name="post-preprocess"/>
 <target name="preprocess" depends="deps-jar,pre-preprocess,do-preprocess,post-preprocess" description="Preprocess project sources."/>
 
 <target name="pre-compile"/>
 <target name="do-compile">
 <fail unless="build.classes.dir">Must set build.classes.dir</fail>
 <mkdir dir="${build.classes.dir}"/>
 <javac includeantruntime="false" source="${javac.source}" target="${javac.target}" deprecation="${javac.deprecation}" optimize="${javac.optimize}" debug="${javac.debug}" destdir="${build.classes.dir}" srcdir="${buildsystem.baton}" bootclasspath="${platform.bootclasspath}" encoding="${javac.encoding}">
 <classpath>
 <path path="${libs.classpath}"/>
 </classpath>
 </javac>
 <copy todir="${build.classes.dir}">
 <fileset dir="${buildsystem.baton}" defaultexcludes="${filter.use.standard}" excludes="${filter.excludes.evaluated},${build.classes.excludes}"/>
 </copy>
 <nb-overrideproperty name="buildsystem.baton" value="${build.classes.dir}"/>
 </target>
 <target name="extract-libs" description="Extracts all bundled libraries.">
 <mkdir dir="${build.classes.dir}"/>
 <nb-extract dir="${build.classes.dir}" excludeManifest="true" classpath="${libs.classpath}" excludeclasspath="${extra.classpath}"/>
 </target>
 <target name="post-compile"/>
 <target name="compile" depends="preprocess,pre-compile,extract-libs,do-compile,post-compile" description="Compile project classes."/>
 
 <target name="pre-compile-single"/>
 <target name="do-compile-single">
 <fail unless="javac.includes">Must select some files in the IDE or set javac.includes</fail>
 <mkdir dir="${build.classes.dir}"/>
 <javac includeantruntime="false" source="${javac.source}" target="${javac.target}" deprecation="${javac.deprecation}" optimize="${javac.optimize}" debug="${javac.debug}" srcdir="${buildsystem.baton}" destdir="${build.classes.dir}" bootclasspath="${platform.bootclasspath}" includes="${javac.includes}" encoding="${javac.encoding}">
 <classpath>
 <path path="${libs.classpath}"/>
 </classpath>
 </javac>
 </target>
 <target name="post-compile-single"/>
 <target name="compile-single" depends="preprocess,pre-compile-single,do-compile-single,post-compile-single" description="Compile selected project classes."/>
 
 <target name="proguard-init" description="Up-to-date check before obfuscation.">
 <property name="obfuscation.level" value="0"/>
 <condition property="no.obfusc">
 <or>
 <equals arg1="${obfuscation.level}" arg2="0"/>
 <uptodate targetfile="${obfuscator.destjar}">
 <srcfiles dir="${buildsystem.baton}"/>
 </uptodate>
 </or>
 </condition>
 <uptodate property="obfuscation.up-to-date" targetfile="${obfuscator.destjar}">
 <srcfiles dir="${buildsystem.baton}"/>
 </uptodate>
 </target>
 <target name="skip-obfuscation" depends="proguard-init" if="obfuscation.up-to-date">
 <fail unless="obfuscated.classes.dir">Must set obfuscated.classes.dir</fail>
 <nb-overrideproperty name="buildsystem.baton" value="${obfuscated.classes.dir}"/>
 </target>
 <target name="proguard" depends="skip-obfuscation" description="Obfuscate project classes." unless="no.obfusc">
 <fail unless="obfuscated.classes.dir">Must set obfuscated.classes.dir</fail>
 <fail unless="obfuscator.srcjar">Must set obfuscator.srcjar</fail>
 <fail unless="obfuscator.destjar">Must set obfuscator.destjar</fail>
 <property name="obfuscator.classpath" value=""/>
 <dirname file="${obfuscator.srcjar}" property="obfuscator.srcjar.dir"/>
 <dirname file="${obfuscator.destjar}" property="obfuscator.destjar.dir"/>
 <mkdir dir="${obfuscator.srcjar.dir}"/>
 <mkdir dir="${obfuscator.destjar.dir}"/>
 <jar jarfile="${obfuscator.srcjar}" basedir="${buildsystem.baton}"/>
 <property name="obfuscation.custom" value=""/>
 <nb-obfuscate srcjar="${obfuscator.srcjar}" destjar="${obfuscator.destjar}" obfuscatorclasspath="${obfuscator.classpath}" classpath="${platform.bootclasspath}:${extra.classpath}" obfuscationLevel="${obfuscation.level}" extraScript="${obfuscation.custom}"/>
 <mkdir dir="${obfuscated.classes.dir}"/>
 <unjar src="${obfuscator.destjar}" dest="${obfuscated.classes.dir}"/>
 <nb-overrideproperty name="buildsystem.baton" value="${obfuscated.classes.dir}"/>
 </target>
 
 <target name="pre-obfuscate"/>
 <target name="post-obfuscate"/>
 <target name="obfuscate" depends="compile,pre-obfuscate,proguard,post-obfuscate" description="Obfuscate project classes."/>
 
 <import file="lwuit.xml" optional="true"/>
 <target name="-lwuit-check">
 <condition property="lwuit.allowed">
 <and>
 <available file="nbproject/lwuit.xml"/>
 <isset property="is.mesdk_lwuit"/>
 </and>
 </condition>
 </target>
 <target name="-pre-lwuit-build" depends="-lwuit-check" if="lwuit.allowed"/>
 <target name="-lwuit-build" depends="-lwuit-check" if="lwuit.allowed">
 <antcall target="lwuit_build"/>
 </target>
 <target name="-post-lwuit-build" depends="-lwuit-check" if="lwuit.allowed"/>
 <target name="lwuit-build" depends="-lwuit-check,-pre-lwuit-build, -lwuit-build, -post-lwuit-build" if="lwuit.allowed"/>
 
 <target name="pre-preverify"/>
 <target name="do-preverify" if="cldc-platform.trigger">
 <fail unless="preverify.classes.dir">Must set preverify.classes.dir</fail>
 <mkdir dir="${preverify.sources.dir}"/>
 <copy todir="${preverify.sources.dir}">
 <fileset dir="${buildsystem.baton}" includes="**/*.class"/>
 </copy>
 <mkdir dir="${preverify.classes.dir}"/>
 <nb-preverify srcdir="${preverify.sources.dir}" destdir="${preverify.classes.dir}" classpath="${platform.bootclasspath}:${extra.classpath}" configuration="${platform.configuration}" platformhome="${platform.home}" platformtype="${platform.type}" commandline="${platform.preverifycommandline}"/>
 <copy todir="${preverify.classes.dir}">
 <fileset dir="${buildsystem.baton}" defaultexcludes="${filter.use.standard}" excludes="${filter.excludes.evaluated},${build.classes.excludes}"/>
 </copy>
 <nb-overrideproperty name="buildsystem.baton" value="${preverify.classes.dir}"/>
 </target>
 <target name="post-preverify"/>
 <target name="preverify" depends="obfuscate,lwuit-build,pre-preverify,do-preverify,post-preverify" description="Preverify project classes."/>
 
 <target name="set-password-init">
 <property name="sign.enabled" value="false"/>
 <condition property="skip-sign-keystore-password-input">
 <or>
 <isfalse value="${sign.enabled}"/>
 <and>
 <isset property="sign.keystore"/>
 <isset property="sign.keystore.password"/>
 <not>
 <equals arg1="${sign.keystore}" arg2="" trim="true"/>
 </not>
 <not>
 <equals arg1="${sign.keystore.password}" arg2="" trim="true"/>
 </not>
 </and>
 </or>
 </condition>
 <condition property="skip-sign-alias-password-input">
 <or>
 <isfalse value="${sign.enabled}"/>
 <and>
 <isset property="sign.keystore"/>
 <isset property="sign.alias"/>
 <isset property="sign.alias.password"/>
 <not>
 <equals arg1="${sign.keystore}" arg2="" trim="true"/>
 </not>
 <not>
 <equals arg1="${sign.alias}" arg2="" trim="true"/>
 </not>
 <not>
 <equals arg1="${sign.alias.password}" arg2="" trim="true"/>
 </not>
 </and>
 </or>
 </condition>
 </target>
 <target name="set-keystore-password" if="netbeans.home" unless="skip-sign-keystore-password-input">
 <nb-enter-password keystore="${sign.keystore}" passwordproperty="sign.keystore.password"/>
 </target>
 <target name="set-alias-password" if="netbeans.home" unless="skip-sign-alias-password-input">
 <nb-enter-password keystore="${sign.keystore}" keyalias="${sign.alias}" passwordproperty="sign.alias.password"/>
 </target>
 <target name="set-password" depends="set-password-init,set-keystore-password,set-alias-password"/>
 
 <target name="add-configuration" unless="contains.manifest.configuration">
 <nb-output file="${dist.dir}/${dist.jad}" encoding="UTF-8" append="true">MicroEdition-Configuration: ${platform.configuration}
</nb-output>
 <nb-output file="${manifest.build.file}" encoding="UTF-8" append="true">MicroEdition-Configuration: ${platform.configuration}
</nb-output>
 </target>
 <target name="add-profile" unless="contains.manifest.profile">
 <nb-output file="${dist.dir}/${dist.jad}" encoding="UTF-8" append="true">MicroEdition-Profile: ${platform.profile}
</nb-output>
 <nb-output file="${manifest.build.file}" encoding="UTF-8" append="true">MicroEdition-Profile: ${platform.profile}
</nb-output>
 </target>
 <target name="create-jad" if="cldc-platform.trigger">
 <fail unless="dist.jad">Must set dist.jad</fail>
 <mkdir dir="${build.dir}"/>
 <dirname file="${dist.dir}/${dist.jad}" property="dist.jad.dir"/>
 <mkdir dir="${dist.jad.dir}"/>
 <condition property="evaluated.manifest.apipermissions" value="${manifest.apipermissions}">
 <not>
 <equals arg1="${platform.profile}" arg2="MIDP-1.0"/>
 </not>
 </condition>
 <condition property="evaluated.manifest.pushregistry" value="${manifest.pushregistry}">
 <not>
 <equals arg1="${platform.profile}" arg2="MIDP-1.0"/>
 </not>
 </condition>
 <condition property="contains.manifest.configuration">
 <contains substring="MicroEdition-Configuration: " string="${manifest.others}"/>
 </condition>
 <condition property="contains.manifest.profile">
 <contains substring="MicroEdition-Profile: " string="${manifest.others}"/>
 </condition>
 <property value="" name="evaluated.manifest.apipermissions"/>
 <property value="" name="evaluated.manifest.pushregistry"/>
 <property name="manifest.jad" value=""/>
 <property name="manifest.manifest" value=""/>
 <nb-output file="${dist.dir}/${dist.jad}" encoding="UTF-8">${manifest.midlets}${evaluated.manifest.apipermissions}${evaluated.manifest.pushregistry}${manifest.others}${manifest.jad}</nb-output>
 <nb-output file="${manifest.build.file}" encoding="UTF-8">${manifest.midlets}${evaluated.manifest.apipermissions}${evaluated.manifest.pushregistry}${manifest.others}${manifest.manifest}</nb-output>
 <antcall target="add-configuration" inheritall="true" inheritrefs="true"/>
 <antcall target="add-profile" inheritall="true" inheritrefs="true"/>
 <property name="manifest.available" value="true"/>
 </target>
 
 <target name="do-extra-libs" if="extra.classpath">
 <property name="dist.lib.dir" value="${dist.dir}/lib"/>
 <mkdir dir="${dist.lib.dir}"/>
 <copy todir="${dist.lib.dir}">
 <path path="${extra.classpath}"/>
 <flattenmapper/>
 </copy>
 </target>
 
 <target name="nokiaS80-prepare-j9" if="nokiaS80-platform.trigger">
 <fail message="Main class is not set!">
 <condition>
 <equals arg1="${main.class}" arg2="" trim="true"/>
 </condition>
 </fail>
 <mkdir dir="${build.dir}/j9"/>
 <taskdef name="j9builder" classname="org.netbeans.modules.j2me.cdc.project.J9Builder" classpath="${libs.cdc-ant-utils.classpath}"/>
 <j9builder jvmargs="${run.jvmargs}" mainclass="${main.class}" args="${application.args}" home="${platform.home}" dist="${j9.dist}" id="NOKIA" platform="${platform.type}" xlet="${main.class.xlet}" applet="${main.class.applet}" jarname="${dist.jar}"/>
 <copy file="${manifest.file}" tofile="${manifest.build.file}" failonerror="false"/>
 <property name="manifest.available" value="true"/>
 <loadfile property="nokia.manifest.j9" srcFile="${j9.dist}"/>
 </target>
 <target name="nokiaS80-prepare-manifest" depends="nokiaS80-prepare-j9" if="nokiaS80-platform.trigger" unless="nokia.icon.invalid">
 <pathconvert property="logo.icon.name" pathsep=" ">
 <path path="${nokiaS80.application.icon}"/>
 <chainedmapper>
 <flattenmapper/>
 <globmapper from="*" to="*"/>
 </chainedmapper>


The error says class file is missing, you can try to clean and build.

Preview Error code -43

Similar Messages

Maybe you are looking for