Preview error function module "CRYSTAL/MDX_GET_STREAM_INFO" not found

Hi,
I cannot preview the report I created in Crystal Report 2008. Here is 1st error message "Failed to retrieve data from the database. Then the 2nd error message is "Database connector error: : Function module 'CRYSTAL/MDX_GET_STREAM_INFO' not found. My data source is from MDX query.
Thanks in advance.
Rose

Hi
Contact your basis administrator to ensure
- All the transports have been installed properly.
- Check the version of Crystal Reports and BusinessObjects and the SAP MDX driver version.
For CRXIR2 +BOXIR2 this issue was resolved in CHF15.
Regards
Sourashree

Similar Messages

Function Module " /Crystal/GET_FUNCAREA_CATALOG" not found

Good day Masters
I am not able to connect to our SAP ECC6.0 because of the below error
Function Module " /Crystal/GET_FUNCAREA_CATALOG" not found
is this function modules exists on the transport files ? do you think by executing the transport this problem will be resolved ?
and how we can execute the transport files from Basis perspective ,,, our basis tried to execute this transport to they got belw error
" file might be currapted "
Regards

Hi
your BASIS administrator should copy the transport files in the import queue and use the STMS transaction to import them in your system. Make sure to import the UNICODE version in the order as shown in the transports_<your language>.txt file.
Make sure that the files are indeed imported.
Which version of BOBJ are you using?
Regards,
Stratos

"/CRYSTAL/MDX_GET_STREAM_INFO" not found.

Hi Ingo.
Iu2019ve read many of your articles regarding BO and SAP and they help me a lot.
Now I kindly ask you to help me regarding to the MDX driver.
Iu2019m getting the following error:
Database Connector Error: 'Function module "/CRYSTAL/MDX_GET_STREAM_INFO" not found.'
Iu2019ve installed the required requires ABAP Transports successfully during the installation of the SAP Integration Kit. Iu2019ve also selected under Settings "Use MDX driver with support for Multiple structures" however the error still appears.
Iu2019ve used tcode se37 to search for the above mentioned function and it doesnu2019t exist, the only functions that were installed on the system with ABAP Transports are (/CRYSTAL*):
/CRYSTAL/FLAT                  Business Objects' InfoSet reporting
/CRYSTAL/BUILD_STRING          Convert mbcs itab to utf-8 string
/CRYSTAL/CALL_QUERY            Execute query in dialog mode
/CRYSTAL/CALL_QUERY_BTC_STREAM Call queries in batch mode
/CRYSTAL/GET_BATCH_INFO        Get batch system info
/CRYSTAL/GET_FUNCAREA_CATALOG Get restricted list of Info Sets
/CRYSTAL/GET_FUNCAREA_INFO     Get Info Set meta data
/CRYSTAL/GET_LOGON_LANGUAGE    Retrieve the logon language for the current session
/CRYSTAL/GET_QUERY_CATALOG     Get the restricted list of queries
/CRYSTAL/GET_QUERY_INFO        Get the query field list after performing user group checks.
/CRYSTAL/QUERY_CALL_BATCH      Call queries in batch mode
/CRYSTAL/RECEIVE_INFOSET_DATA Crystal info set and query batch retrieval prototype
/CRYSTAL/RECEIVE_INFOSET_DONE Signal end of data to InfoSet driver
/CRYSTAL/RECEIVE_INFOSET_MDATA Crystal info set and query batch retrieval prototype
/CRYSTAL/UPDATE_LOCATION       Update Crystal Enterprise report datasource location
/CRYSTAL/ODS_REPORT            Business Objects' ODS reporting
/CRYSTAL/GET_ODS_FIELD_INFO    Retrieve field (InfoObject) information for ODS object
/CRYSTAL/ODS_EXECUTE_QUERY     Execute ODS query
/CRYSTAL/SECURITY              Crystal Decisions security functions
/CRYSTAL/GET_USER_LIST         Retrieve filtered list of users belonging to given roles
As you can see there is not any MDX_GET_STREAM_INFO function!!!!
Iu2019m using SAP ECC60 + Crystal Reports 2008 CR Developer Version 12.0.0.683 + SAP Integration Kit.
Can you please be so kind to tell me what Iu2019m doing wrong?! Did I miss something?!
Waiting for your feedback.
Kind Regards
Armando Santos

Hi Ingo.
Iu2019ve already used tcode se37 to search for the above mentioned function and it doesnu2019t exist, the only functions that were installed on the system with ABAP Transports are (/CRYSTAL*):
/CRYSTAL/FLAT Business Objects' InfoSet reporting
/CRYSTAL/BUILD_STRING Convert mbcs itab to utf-8 string
/CRYSTAL/CALL_QUERY Execute query in dialog mode
/CRYSTAL/CALL_QUERY_BTC_STREAM Call queries in batch mode
/CRYSTAL/GET_BATCH_INFO Get batch system info
/CRYSTAL/GET_FUNCAREA_CATALOG Get restricted list of Info Sets
/CRYSTAL/GET_FUNCAREA_INFO Get Info Set meta data
/CRYSTAL/GET_LOGON_LANGUAGE Retrieve the logon language for the current session
/CRYSTAL/GET_QUERY_CATALOG Get the restricted list of queries
/CRYSTAL/GET_QUERY_INFO Get the query field list after performing user group checks.
/CRYSTAL/QUERY_CALL_BATCH Call queries in batch mode
/CRYSTAL/RECEIVE_INFOSET_DATA Crystal info set and query batch retrieval prototype
/CRYSTAL/RECEIVE_INFOSET_DONE Signal end of data to InfoSet driver
/CRYSTAL/RECEIVE_INFOSET_MDATA Crystal info set and query batch retrieval prototype
/CRYSTAL/UPDATE_LOCATION Update Crystal Enterprise report datasource location
/CRYSTAL/ODS_REPORT Business Objects' ODS reporting
/CRYSTAL/GET_ODS_FIELD_INFO Retrieve field (InfoObject) information for ODS object
/CRYSTAL/ODS_EXECUTE_QUERY Execute ODS query
/CRYSTAL/SECURITY Crystal Decisions security functions
/CRYSTAL/GET_USER_LIST Retrieve filtered list of users belonging to given roles
As you can see there is not any MDX_GET_STREAM_INFO function!!!!
Regarding to "If not I would suggest yo try to reimport the Crystal Reports BW MDX connectivity transports" --> I've also repeated this step (Unicode files: * MDX Query Connectivity transport (K900529.r21 and R900529.r21)).
Any suggestion?!
Regards
Armando Santos

Dump:Function module "/GRCPI/GRIA_SPM_SYNC" not found

Hello Experts,
When executing EAM Master Data Synch from GRC system, a short dump results with the description "/GRCPI/GRIA_SPM_SYNC" in Plugin system ( Basis 640 ).Plugin system is at latest patch level ( GRCPINW SP12 ).we found that no function module available in plugin system.Could you please suggest or recommend any fix ? your help is much appreciated.
Regards,
Rajan

Rajan,
I connected GRC 10.0 to Plugin system which is on Basis 640. But gettign similar ABAP dum as you"
The function module "/GRCPI/GRIA_SPM_SYNC" was called, but cannot be found in the Function Library". I Already implemented following SAP notes:
0001941542 CALL_FUNCTION_NOT_FOUND dumps on running EAM Sync job or FF
0002062450 EAM function modules are missing in 640 and 620 releases
How did you resolve this issue?

Function module "/SAPAPO/CIF_CBASE_INB" not found.

Dear,
When I want to CIF the sales orders from ECC to TM 8.0 system. I get this short dump in TM. This function(/SAPAPO/CIF_CBASE_INB) is not available in TM. Is there any idea about how I can solve it?
Regards,
Mehmet YILMAZ

Sorry Mehmet, I missed it in your thread. Why are you CIF'ing your sales orders to TM instead of setting up the standard connector (in PI/XI)?
Regards,
Mike

BO-CRYSTAL REPORT 2008--" FUNTION MODULE /CRYSTAL/MDX_GET_STREAM_INFO"

I'm working with BO Edge series , when I execute the query in Crystal Report 2008 , integrating with SAP BI 7.0 im getting the error as follows "Database connector error : 'function module' /CRYSTAL/MDX_GET_STREAM_INFO" not found . if any one come across and solved the above error. Kindly let me proceed with the above issue.

Hi,
take a look here:
Install Part #1
/people/ingo.hilgefort/blog/2008/09/17/businessobjects-and-sap--installation-and-configuration-part-1-of-4
Install Part #2
/people/ingo.hilgefort/blog/2008/09/17/businessobjects-and-sap--installation-and-configuration-part-2-of-4
Install Part #3
/people/ingo.hilgefort/blog/2008/09/17/businessobjects-and-sap--installation-and-configuration-part-3-of-4
Install Part #4
/people/ingo.hilgefort/blog/2008/09/17/businessobjects-and-sap--installation-and-configuration-part-4-of-4
Crystal Reports connectivity for SAP requires ABAP Transports to be imported to your system.
Ingo

Function module WWW_ALV_CALL is not released for the Internet

Hi
I am facing this error Function module WWW_ALV_CALL is not released for the Internet and Only user SAP can release the function module.
Best Regards
GAGAN

hi,
This Web based calls are not available anymore in Netweaver 2004s/7.0.
More information in SAP-Note: 910202
Hope this helps
regards
Tobias

Connector Error: u2018Function module u201C/CRYSTAL/GET_OSQL_OBJECT_LISTu201D not found

Hello experts,
I have installed Crystal Reports 2008 (not BO Edge) and BusinessObjects Integration Kit for SAP on my laptop and I try to connect my crystal reports to the SAP ECC 6.0 data source. After establishing a connection I can see the following groups in the Available Data Sources: CL [Data Clusters], DD [Data Dictionary] and FN [ABAP Function modules]. However when I try to open them, I get messages:
- Database Connector Error: u2018Function module u201C/CRYSTAL/GET_OSQL_OBJECT_LISTu201D not found.u2019
- Database Connector Error: u2018RFC_INVALID_HANDLEu2019
Could you please give some advice, what is missing?
Best regards,
Marcin

Hi Ingo,
The Installation Guide u201CBusiness Objects Integration Kit for SAP u2013 Installation and Configurationu201D (created on 01.10.2008, where you are the author) that is listed on the integration kit download page:
https://www.sdn.sap.com/irj/boc/index?rid=/webcontent/uuid/806c9894-42a5-2b10-648a-d900489b76da [original link is broken]
refers to BusinessObjects Enterprise / SAP NetWeaver BI combination.
As I am interested in the Crystal Reports 2008 / mySAP ERP combination I searched for further documents and could find the following, where the ABAP transports are described:
u201EBusiness Objects XI Integration for SAP Solutions Installation Guideu201D issued on 03.06.2008
and
u201EBusiness Objects XI Integration for SAP Solutions Installation and Administration Guideu201D issued on 02.12.2008.
Is one of these documents the u201Einstallation guide for the SAP Integration Kitu201D that you mentioned? If not, could you please send the link to the installation guide you mean, where the ABAP transports for Crystal Reports 2008 / mySAP ERP combination are described? That would be very helpful.
Marcin

Error 'Function module "IAOM_ACCOUNT_MANAGER" not found' in RPM_FIN02.

Hi,
When I am trying to run report RPM_FIN02 in ERP system, I am getting error ''Function module "IAOM_ACCOUNT_MANAGER" not found'.
Please note i have done required configration in both systems i.e. cProject and ERP.
Can somebody help me on this?
Regards,
Manoj

Thanks for your input.
This note is already implemented in our system.
Anyway my problem is solved.The problem was in our configration.
Regards,
Manoj

Error "Function module not found."

Hi,
I am calling RFC_GET_MATERIAL_DATA but I got this error "Function module "RFC_GET_MATERIAL_DATA" not found". What does it mean? How I can solve this error?
Thank you in advance,
Sunny

Well I think it simply means that the Function Module does not exist in the system where it needs to get executed.
First check if you are calling this FM remotely ( with a DESTINATION specification ). Then ensure that the FM exist in the DEST system (SE37).
if you are not calling it remotely, then check if the FM exist in your local system.Just check in SE37.
Reason it might not be available in the system is because of the version , or say product type ( R/3, CRM, EBP, BW... ).
Thanks,
Ram

Compilation error - FPGA NI PXI-7951R board - ERROR: Xst: 2472 - Top module Puma15Top was not found.

I'm trying to compile a "user CLIP socket" for the NI PXI board - 7951R which has a Virtex-5 LX30 FPGA from Xilinx, but I got the bellow message from NI Compiler, this message is in error report Xilinx.log.
It says that module Puma15Top was not found.
But this module is a NI property and is automatically compiled by NI Compiler.
The compiler automatically generates these files (Puma15Top...) that are passed to the compiler of Xilinx. The Puma15Top files are in the path, i.e: C: \ NIFPGA \ compilation \ Told_F_I_CC5DC260 \ source_files.
This folder name is automatically generated by labview (Told_F_I_CC5DC260) for each different project or compilation.
So I have no way to configure in CLIP files where it'll be Puma15Top, once the path is automatically generated during compilation by Labview.
Does anyone have any idea how to solve this problem? Or have you experienced some like this?
Following error log:
### XstSynthesis ###
Puma15Top
Reading design: Puma15Top.prj
=========================================================================
*                          HDL Compilation                              *
=========================================================================
Compiling vhdl file "C:/NIFPGA/jobs/Cm9xA8x_LaF6U1d/CLUC001_Conf.vhd" in Library work.
Entity <CLUC001_Conf> compiled.
Entity <CLUC001_Conf> (Architecture <behavioral>) compiled.
Compiling vhdl file "C:/NIFPGA/jobs/Cm9xA8x_LaF6U1d/CLUC001_CLIP.vhd" in Library work.
Entity <CLUC001_CLIP> compiled.
Entity <CLUC001_CLIP> (Architecture <rtl>) compiled.
Entity <CLUC001_CLIP> (Architecture <behavioral>) compiled.
ERROR:Xst:2472 - Top module <Puma15Top> was not found.
ERROR:Xst:2469 - Please specify the correct library via the -work_lib switch.
-->
Total memory usage is 149596 kilobytes
Number of errors   :    2 (   0 filtered)
Number of warnings :    0 (   0 filtered)
Number of infos    :    0 (   0 filtered)
Process "Synthesis" failed
Thanks in advanced!

Hi Guilherme,
Thanks your suggestion, I upgraded NI-RIO to 13.1.1 version but the problem persists, as shown below:
Project: T_old.lvproj
Target: F (RIO0, PXI-7951R)
Build Specification: I_2
Top level VI: I.vi
Compiling on local compile server
Compilation Tool: Xilinx 11.5
Start Time: 2/9/2014 18:03:51
Run when loaded to Fpga: FALSE
JobId: z8Cq8B4
Working Directory: C:\NIFPGA\compilation\Told_F_I2_F3177096
Compilation failed due to a Xilinx error.
Details:
ERROR:Xst:2472 - Top module <Puma15Top> was not found.
ERROR:Xst:2469 - Please specify the correct library via the -work_lib switch.
-->
Total memory usage is 149596 kilobytes
Number of errors   :    2 (   0 filtered)
Number of warnings :    0 (   0 filtered)
Number of infos    :    0 (   0 filtered)
Process "Synthesis" failed
Start Time: 18:03:51
End Time: 18:05:19
Total Time: 00:01:27,414
Best,
JEMP

ALE-IDOC Error -Function module not allowed: ZIDOC_INPUT_MATCLASS

Hello all,
I am having a requirement to enhace bd10 to suit for material master.For that i have written a Z-function module to at inbound side.
Function module has coading for extended segments and z processing code is created for the same.
The issue is that i am getting error-Function module not allowed: ZIDOC_INPUT_MATCLASS.Please help to resolve the issue.
Thank you.

I have checked as per your suggestion in detail the error reported as-
Function module not allowed: ZIDOC_INPUT_MATCLASS
Message no. B1252
Diagnosis
The function module ZIDOC_INPUT_MATCLASS and the application object type which were determined are not valid for this IDoc.
Procedure
1. Please check that the process code in the inbound partner profile is correct.
2. If this is the case, you should check the ALE inbound methods ALE inbound methods for the process code and see whether the specified function module and application object type are correct.
3. If this is also the case, then the function module and the application object type are not permitted for the logical message type, message variant, message function and basis type that are contained in the IDoc control record. You should check whether the correct values have been assigned to these fields in the control record. If they do have the correct values, then the assignment to the function module and the application object type needs to be maintained.
I am done with all the procedure.
I am currently using-BUS1001006.I really dont know if this is the one for extended idocs and z function module for material master.Please guide me if this is the issue. And i f so please guide right buziness object.
Thanks.
Edited by: sanjivrd on Sep 22, 2009 1:27 PM

Unable to create rule Error:Function Module does not meet the workflow conv

Hi Workflow experts,
Could any one help me with rule creation. Below is my Function Module Interface.
""Local Interface:
*" TABLES
*"      AC_CONTAINER STRUCTURE SWCONT OPTIONAL
*"      ACTOR_TAB STRUCTURE SWHACTOR OPTIONAL
*" EXCEPTIONS
*"      NOBODY_FOUND
The function module test is successful with all required conventions for workflow but while i try to create a rule with the funtion module i get the error "Function Module does not meet the workflow conventions"
I Also have included the following in FM
INCLUDE <cntn01>.
Any suggestions would be helpful. Thanks in Advance,
Imran

Hi,
I am not sure whether the rule accepts the optional flag. Remove the optional flag for the tables parameters and try again. According to the documentation you have implemented the right interface. It might be the issue with the tables parameter being optional.
Hope this helps,
Sudhi

FUNTION MODULE /CRYSTAL/MDX_GET_STREAM_INFO"

Hi Ingo,
I opened a separate thread here just in case for your reply on this error.
BO-CRYSTAL REPORT 2008--" FUNTION MODULE /CRYSTAL/MDX_GET_STREAM_INFO"
Thanks

Hi Richard,
you should only open one entry for one problem - not two.
Ingo

'Error loading plugin: Plugin file not found' message on ONLY 5 sites, but all others OK. Help, please!

Hi Again!
I posted this problem here before, but since I really need to access the sites that receive this error message in less than a month, I had to re-post; hopefully someone who didn't see it before will see it & have a solution for me.
Here are the details: I'm running windows 8.1 & I use Firefox 33.1.1, Pale Moon 25.1.0 or Opera 26.0 as my browsers, (I have IE installed & up-to-date, but I never use it). I followed the 10-point checklist on Adobe & everything was done, except for "uncheck Hardware Acceleration" in Flash 'Settings'; I tried to uncheck it on this site, where it's indicated, as well as in my 4 browsers when I'm doing something that uses Flash, but no matter how hard I try, I can't 'uncheck' the check mark in that tiny box! Since this error problem only affects 5 web sites, & I can watch streaming media on all other sites, I don't think it's an issue.
Here's how this problem began: I was watching a live, streaming nest-cam on 5/09/14 around 11:00AM, (yes, I DO know the exact time & date, because it happened so suddenly while I was watching this website that I'd been watching since the end of February, 2014), when my screen went black. I thought it was probably an Adobe Crash, but when the usual Crash Report window didn't show up, I just closed Firefox & reopened it, expecting to resume watching the nest-cam. When I went back to the site, I got the black screen with the "Error loading plugin: Plugin file not found" message. The chat portion on the site still works, though. I know there are other sites with this nest-cam feed, so I started trying them, but it took several tries for me to find one that didn't get the error message! I posted this problem on "Windows BBS" forum, & someone else posted that the same thing happened to them AND on the same sites! They didn't have a solution, either. I cleared my cache, rebooted my PC & even did a System Restore, but whatever happened in that brief second made using ONLY 5 sites impossible. Here are the sites that receive the error message:
http://pixcontroller.com/eagles, (but I CAN go to http://pixcontroller.com, but there isn't any streaming media)
http://cbslocal.com/eagles
http://westmorelandconservancy.org/BlueBirdwebcam-1.htm
http://wildearth.tv/cam/pittsburgh-bald-eagles, (I get the error message on ALL cams on this site)
http://aviary.org/BE-NestCam1 (I get the error message on ALL cams on this site)
Now if any videos from the 5 websites above are uploaded to YouTube, I can watch them perfectly...no error message if I watch the videos elsewhere. Luckily, I found Ustream, & they have most of the nest cams I watch, but I need to fix this issue, because it's nearing nesting time! I'm an amateur nest-watcher & it's vital that I have access to these 5 sites, so if anyone knows how to fix this, PLEASE tell me!
Thanks for taking the time to read my post.
All suggestions/solutions are gratefully accepted.
Thanks in advance for your help!
DogPal

File Not Found Error in Welcome Screen
07-Nov-2013 10:25
Tags: #dreamweaver_cs6_update
Help please!
Live preview also not working.
I have exactly the exact problem described below but do not have a folder with the same name as the volume created under the volume. Please can someone help - I've tried everything. This problem only happened when I upgraded to Dreaweaver CC!
"On launching Dreamweaver on your Macintosh if your Welcome Screen is not loading and if you see a "File not found" error, please check if you have a folder with the same name as your volume created under the volume. For more info on this please go through the attached pdf document. Other dialogs/panels in dreamweaver that will be blank due to this issue are Jquery Swatches panel, Adobe Edge Webfonts tab in Manage Fonts dialog,W3c Error Info dialog, Externalise Javascript dialog and svn revert dialog. After following the changes mentioned in the attached document please check all the affected dialogs/panels to confirm everything is working as expected."
Thanks,
Martin Bond
[personal information removed by moderator]

Preview error function module "CRYSTAL/MDX_GET_STREAM_INFO" not found

Similar Messages

Maybe you are looking for