Preview "export to" not working in OS 10.10.3

When I try to export a PDF document, Preview window does not show the Save button. My only recourse is to hit ESC to close the window. Export to PDF is working correctly, though. What does work is just to press Enter/Return so at least I can accomplish what's needed.

Hi,
There is one solution for you!
In the presentations services side, Go to Amount column-> Column Properties -> Data Format -> Change 'Treat Number as' Number not currency type. save and download into excel. Now you can get the amount column in number format not in the char format.
But you will not get the Currency symbol in the report ($).
Hope this is helpful.
Regards,
Bose

Similar Messages

Exported HTML not work in my host.

Exported HTML not work in my host.
The program works fine. Looks good in the browser preview and published in businesscatalyst, but when i exporting as html and upload it to my server is bad, all misplaced.

Thanks for the reply.
Everything is apparently copied and permissions are well.
Watch this please.
So it should be seen:
http://koldo01.businesscatalyst.com/
It is seen:
http://www.koldofuentes.com/

Live Preview Highlight is not working.

I recently downloaded Edge Code to a new work computer and the Live Preview Highlight is not working.
I have Edge Code installed on a personal computer, and it works great. The version I am using was downloaded about 6 months ago so I am not sure if they changed something with the most recent version. When I highlight a section within the html i.e. a table or row, it would highlight those same sections in the preview. However, this is not the case on my new computer.
Anybody know whats up? Is it setting on Chrome that I need to change or is there some update that I am not aware of.

I guess I assumed that you had Chrome setup to auto-update (like I have it). The only way Live Preview will work in a previous version of Edge Code is with an older version of Chrome.
But there are other reason why Live Preview may not work in latest version of Edge Code. Take a look at Live Preview section of Troubleshooting Guide.
Randy

How do I print in B&W now that I have lion? The whole "open in preview" method is not working. Thanks

Subject says it all.....The whole "open in preview" method is not working. Any ideas or solutions would be appreciated. Thanks

What kind of printer do you have? Have you looked at their PDEs to see if there are any settings for color/b&w?
How is the "open in Preview" not working? Please provide some details.

Preview Outlook2013 does not work on RDS2012R2 terminal server

Hi.
I am IT manager for a new RDS 2012R2 environmnet with 2 terminal servers running MS Office Professsional Plus 2013 SP1 Norwegian.
The main problem :
Previewing of word/excel/powerpoint file attachments in Outlook2013 does not work on these 2 RDS2012R2 terminal servers.
The excel error is telling me the following message:
"Cannot preview this file because an error occured in the following preview program: Previewing in Microsoft Excel"
Previewing is OK functioning with file explorer but not with Outlook2013 consistently.
I have updated both 2 RDS 2012R2 TS servers with the newest Windows Updates for Office 2013 and OS as well.
I tried several times to rin repair of the Office Pro Plus 2013 installation with reboots with no positiv soultion to this preview problem.
I searched the Internet/Google for hours without any luck anf here is some of the URS I have tried so far:
http://answers.microsoft.com/en-us/office/forum/office_2013_release-outlook/outlook-2013-cant-preview-word-excel-files/18c6b2da-17a0-4079-8694-d7aa0f7dfaee
http://answers.microsoft.com/en-us/office/forum/excel/outlook-2013-excel-attachment-error-microsoft/af38d448-0fa0-4b0b-a42b-60a1c58746e5
http://answers.microsoft.com/en-us/office/forum/outlook/please-help-this-file-cannot-be-previewed-because/ca25f299-d216-4e23-a99b-f0595552063d
Outlook 2013 excel attachment error: microsoft excel cannot open or save any more documents because there is not enough
available memory or disk space
http://superuser.com/questions/762773/this-file-cant-be-previewed-because-of-an-error-in-the-microsoft-word-previewe
http://superuser.com/questions/554327/outlook-2013-email-attachment-previewer-sometimes-stops-working
http://community.spiceworks.com/topic/386255-office-2013-word-excel-unable-to-preview-files
This is a major problem and I am very thankful for
a 100% accurate answer and solution
to this preview headache.. :-)
Regards
[email protected]
mvh Kenneth Knudsen MCSE 2003 HP ASE

Hi,
Thank you for posting in Windows Server Forum.
Might possible that DCOM permission got changed and to verify that you can check following steps.
Go to start, then run. Type dcomcnfg and push o.k. Component Services should come up.
Expand Component Services, click on Computers, then "Right click" on My Computer and go to "properties".
Click on Default Properties tab, and make sure the following is set:
Default Authentication Level: Should say Connect, not "None"
And Default Impersonation Level: SHould say Identify.
When those are set properly, hit ok and turn on your protected mode back on your Office applications.
In addition to this, please check whether you find any information from event log for this case. Also try to add Builtin users to grant read, write and execute persmission.
Hope it helps!
Thanks.
Dharmesh Solanki

Preview hanging/crashing/not working in Lion on new MacBook Air

I just migrated from my old 2008 MBP to brand new MacBook Air running Lion. Since then, Preview is screwy: will open a few things but then will stop opening anything and is either fully crashed, or will still be able to go to it and look at what is open, but it will not open anything else.
Also, the plug in for safari doesn't not work well when a pdf opens in a window with mulitple frames (the icons to save or open with preview do not appear). Making me seriously consider changing default pdf reader to acrobat as this is getting really annoying.

Looks like I found a fix -- see
https://discussions.apple.com/thread/3197855

Include in Export does not work in APEX 3.1

I have a report with many columns. On screen I only show several columns, but on export to CSV I want to include all columns.
However, when "Show on Report" is set to No, and I want to set "Include in Export" to Yes on the "Print Attributes" tab, it does not get updated.
It only gets updated when the "Show on Report" is set to Yes.
It also seems that the "Include in Export" on the "Report Attributes" tab is not in sync with the "Include in Export" on the "Print Attributes" tab the first time you access the "Print Attributes" tab.
Question: Does "Include in Export" only works for columns which has the "Show on Report" set to Yes? If Yes, how can I achieve the above mentioned?
Guido

Marc,
After some investigations the following can be concluded:
On the Report Attributes tab, pick a column, and set "Show Column" to Yes, "Include in Export" to Yes, and no conditions.
I do not want this column to be printed, so on the Print Attributes tab, set the "Column Width" to 0.
When you run the report, you will notice that the column is not included in the export to CSV and not printed.
Setting the "Column Width" to a value greater than 0, the export to CSV works fine, but the column is also printed.
You can have a look at page 1 at at http://apex.oracle.com/pls/otn/f?p=261 (demo/ankpm)
Thanks Patrick for your solution (:REQUEST LIKE 'FLOW_EXCEL_OUTPUT_%'), it works great. The column is now not show on screen but included in the export to CSV. However, you have to set the column width to a value greater than 0.
An enhancement request for 4.0 could be to also have a property "Include in Print", and that this property and "Include in Export" are not dependent on the "Show Column" value.
Guido

Aperture export is not working, "Choose" buttons also not reacting

Suddenly I can't export versions, originals, metadata and export as library anymore. Also all "Choose" buttons do not react anymore. For example its not possible to open another Library or choose the external photo editor in Preferences. If I login with my second useraccount Aperture does work just fine.
On Monday I had no problems at all. Sofar I did the following things:
FIRST.
Repair Diskpermissions and Verify disk which was OK.
Moved to desktop following files:
~/Library/Preferences/com.apple.Aperture
~/Library/Caches/com.apple.Apertue
~/Library/Containers/com.apple.Aperture
Emptied the trash and restarted. The problem is not solved.
SECOND.
All the above actions and restart.
Aperture Photolibrary first aid, "Repair Permissins" , "Repair Database" and "Rebuild Database".
The problem is not solved.
THIRD.
Uninstalled Aperture and removed all files containing the frase "Aperture" (as far as these files had any connection with the application).
Repair Diskpermissions and Verify disk which was OK.
Emptied the trash and restarted.
Installed Aperture from DVD and update via Apstore.
Still the same problems so I am asking the form members for help.
Mathieu

Are you having any troubles wiht other applications run from this account?
From what you wrote you seemed to have covered all the bases not sure what else to suggest. What is the system?
Do you have any plugins installed in Aperture ? What about any applications, plugins etc, for this account?
You can try doing a safe boot (hold the shift key down as soon as you hear the start up chime. Hod it until the Apple appears on the screen) Safe boot takes longer to come up, there will be a status bar at the bottom of the screen while it boots. Once it is up you will see Safe Boot in red letters at the top of the screen on the login page. This might not work if you have File Vault turned on.
Once booted in Safe mode log in. Aperture use to not run in Safe mode because the graphics card is restricted but I believe in 3.5. it will run. Note everything will be slow and jerky.
See if that makes a difference. Once done testing boot normally and try it again.

Dreamweaver CC: Preview in Browser Not Working

I am new to Dreamweaver CC, but I've used other versions of Dreamweaver extensively.
Since I've installed CC, by Preview in Browser has not worked. When I click it, and choose my browser (this issue occurs with ANY browser I choose), it opens my chosen browser and then tells me the page cannot be found. I know the issue is where DW is pointing my browser. For example, if i'm working in my contact.php file in DW and tell it to preview in broswer, the address that shows up in my search bar is "contact.php/"
Now obviously, that won't point my browser to any usable address. So how do I fix the issue? I've tried looking through all kinds of settings but have found nothing.
Someone please help me!

You realize you must have a local testing server installed and defined in your Site settings in order to preview PHP pages, right?
Which Local Testing Server are you using?
Is it running?
Do you have it pointing to your localhost? See screenshots:
Servers: Basic Tab
Servers: Advanced tab
Final Screen:
Nancy O.

Oracle.ifs.admin.export.ExportUsers NOT working in SILENT mode

I'm trying to export my CMSDK users via the commandline script (since the GUI tool MAKES YOU SELECT EACH USER ONE AT A TIME!!!) but it is not working. The CMSDK doc incorrectly tells you to run oracle.ifs.admin.export but I've found that you have to run ...ExportUsers. However my def file has the runsilent attr set but the GUI app still pops up???? Below is my script
#!/bin/sh
IFS_ROOT_HOME=$ORACLE_HOME/ifs
export IFS_ROOT_HOME
. $ORACLE_HOME/ifs/common/bin/ifsunixcmds
. $ORACLE_HOME/ifs/cmsdk/bin/system/ifssetenv
CLASSPATH=${IFS_CLASSPATH}
export CLASSPATH
java -Xmx64M oracle.ifs.admin.export.ExportUsers /d01/app/oracle/product/oas904mid/ifs/cmsdk/export/export-users.def
And here is my def file...
IFS.EXPORT.RunSilent=true
IFS.EXPORT.Username=system
IFS.EXPORT.Password=manager9ifs
IFS.EXPORT.Service=IfsDefault
IFS.EXPORT.SchemaPassword=gapp1969
IFS.EXPORT.LogFile=export-users.log
IFS.EXPORT.USER.ExportedUsers=bdillon
IFS.EXPORT.ExportSetName=dev-users
IFS.EXPORT.ExportToPath=/d01/app/oracle/product/oas904mid/ifs/cmsdk/export/
IFS.EXPORT.ExportTreeSize=50
IFS.EXPORT.USER.GetAllAncestors=true
IFS.EXPORT.USER.GetDirectAncestors=false

Pl see your other thread here - libxp.so.6
You cannot terminate an install before successful completion and expect things to work flawlessly ;-)
Srini

Search in saved preview .pdf files not working any more

When I download a .pdf file from the internet and open it in preview, the search command works ok. When this same file is saved to disk and opened again, search is not working any more. Is this a bug, or my fault. Regards Rolf

Hi,
I hope this helps...
A while back we have more than one browser running on our PC (IE, Firefox, Chrome) and we messed by how Acrobat views documents over the web.
I think that this has some relevance here, as around this time LC also started falling over previewing forms.
Now if we open LC and Acrobat is not running, the "Preview PDF" is not present or accessible. So now we fire up Acrobat before we open a form in LC Designer and the preview tab is there and functioning.
Not much of a workaround; but I am hoping that someone will have a better one!!!
Good luck,
Niall

Export function not working in Internet Explorer

so i've got a report displayed in IE, but when i go to export to any file format, IE opens a new tab and that's it. depending on certain settings (like adding the server to intranet zone), i can get the new tab to say nothing or "Blank Page".
i've tried adding the server to the safe zones, i've played with some tabs settings, i enabled the "run active x" options...
finally i reset all settings of IE to their defaults. i still can't figure out what i'm missing. if i copy the url to another browser the export works fine, as expected. on another machine i found this "rsclientprint 2008" addon so i downloaded
that but i still got nothing.
on a working machine, when i click the export button, a new tab opens with the name of the reporting server in it, it thinks a bit, then that tab closes and i get the "open or save" message in the original tab. on the one that's not working, it
opens the new tab, DOESN'T show the server name and that's the end of it. so it seems like it can't connect to the server on the export function. (but report creation works just fine)
anyone know of anything glaring that i'm missing??
~if this were /. this sig would be funny

good call - i'll try that now.
the app i had installed before was Classic Shell so that Windows Explorer's (win7) left hand pane doesn't jump around on you when you double click.
i just completely uninstalled the application and rebooted. still nothing.
going to do a repair while classic shell is uninstalled. brblol
UPDATE:
so i couldn't run the IE installer (per MS suggestions) because i have a newer version. so i tried the fixer that i found here:
http://support2.microsoft.com/mats/ie_performance_and_safety
and it found the following "errors":
Issues found
Data Execution Prevention disabled
Detected
Enable Data Execution Prevention
Not Run
Security settings
Detected
Reset Security settings
Not Run
Pop-Up Blocker disabled
Detected
Enable Pop-Up Blocker
after fixing, the problem still exists!
~if this were /. this sig would be funny

Icon Preview In Finder Not Working Properly

Ever since upgrading to Lion I've had the issue of icon preview not working properly in finder. This mostly occurs with movie files such as .wmv files. Some take a long time to show a preview and some don't even show a preview. In Snow Leopard this was never an issue.
This also seems to happen in stacks as well. I'll get a greyed out box with a dsah borded. Seems as though it's the large files that do this.
Anyone have any ideas?

I'm experiencing the same thing but with all kinds of files that have shown a preview in snow leopard: pictures, PDF-documents, music (with album art). It seems that previews are not created automatically whenever I change the name of a file or edit it in any other way, the preview shows up instantly. Rebooting works, too.
This is really annoying and a little online search shows, several people are having the same problem. As far as I know, there's no fix yet.

PDF Preview Handler does not work

Hello,
We installed Outlook 2010 on a new Windows 7 32bit machine with Acrobat Reader X.
The preview handler for PDF files does not work in Outlook 2010. Reader works fine by itself.
If I uninstall Reader X and install verison 9.3 then the Preview Handler works fine. Any suggestioers? I have run the repoair on Office and reinstalled Reader X again but to no avail.
- Neil

No i didnt check for office updates.. however i did locate a fix. I am not usually keen to try random fixes so i tested it solo first to confirm it was legitimate. worked fine. http://www.pretentiousname.com/adobe_pdf_x64_fix/
Thank you for attempting to help me though.
Regards,
Will

Import/Export statement not working..

Hi all,
   I want to export some data from BADI & Import it back in user exit.
I wrote following line of code in BADI
       export P1 FROM xstr to memory id 'ZABHI'.
& following line of code in User Exit
      import P1 to xstr FROM memory id 'ZABHI'.
After export sy-subrc becomes 0 hence export statement is working fine but when aftr import xstr remains blank.(sy-subrc = 4)
I tried to execute same code in single ztest abap program & it works fine there.
Thanks in advance.

hi abhijeet,
you are most welcome....
to delete, use
** deletes the data to save wastage of memory
delete from database indx(xy)
client sy-mandt
id 'ZABHI'.
you need to delete it coz, its available to all programs in the R/3
server via the ID and you don't want anybody to view the data u are
sending into memory.
the statement that u used earlier was program specific and hence
not accessible to the user exit.
Regards,
Samson Rodrigues.

Preview "export to" not working in OS 10.10.3

Similar Messages

Maybe you are looking for