Preview failed because Adobe Muse could not make connection over HTTP.
Preview failed because Adobe Muse could not make connection over HTTP.
The most commons cause of this is fire wall software which prevents HTTP connections,
you mai need to change Fire wall settings to allow Adobe Muse to make connections??
Fire Wall is not problem!!
I asked this question a month ago, no one has answered.
does anyone know how to solve this problem?
I apologize for the bad English
thanks in advance
Mac or Windows? What software do you have installed that may be interfering with an application's ability to open an internet connection (i.e. virus checker, anti-malware utility, firewall, etc.).
Similar Messages
-
Preview failed because Adobe Muse could not make a connection over HTTP. The most common cause of this is Firewall software which prevents HTTP connections. You may need to change Firewall settings to allow Adobe Muse to make connections.
no firewall at all, in win 8.1, turned it off for all networks
ftp and publish works just fineHi,
Please take a look at this post : Re: Adobe Muse - Preview Failed
Regards,
Aish -
i keep gettign this message when trying to drag music in itunes.
attempting to copy to the disk "iPhone" failed because the disk could not be read from or written to.Can apply to iPhone as well > 'Disk cannot be read from or written to' when syncing iPod or 'Firmware update failure' error when updating or restoring iPod
If you are using a Windows based computer > iTunes for Windows: Gathering and using iTunes Diagnostics
Ignore: To repair an iPod disk—Restore the iPod or iPod shuffle using the latest version of iTunes. -
First-time install on a SBS 2011 server, name replaced as <SERVER> for this post. I had created a separate IIS site rather than using the Default Web Site and I am guessing this might be a permission issue on the folder...
Installation failed with Event ID 110 and a repeating error that states, "<Error>: Attempt to configure Active Directory Rights Management Server failed. The provisioning process failed to create the Configuration database due to the following
error from Sql Server: System.Data.SqlClient.SqlException: ALTER DATABASE failed because a lock could not be placed on database 'DRMS_Config_adrms_<SERVER>_local_443'. Try again later. ALTER DATABASE statement failed. ALTER DATABASE failed because a
lock could not be placed on database ." Configuration as follows:
<Informational>: This server might need to be restarted after the installation completes.
Active Directory Rights Management Services
Cluster Type
Root cluster
Trust Hierarchy
Production
Configuration Database Server
Windows Internal Database
Service Account
<SERVER>\adrms
Cluster Key Storage
AD RMS centrally managed key storage
Cluster Web Site
Active Directory RMS
Cluster Internal Address
https://adrms.<SERVER>.local:443/
SSL Certificate
Create a self-signed certificate
Licensor Certificate Name
<SERVER>
Register SCP
Register nowHi Ahmad, I have the same problem, I have a server windows server 2008 R2 standard. While
doing an Enterprise to Standard downgrade, I have removed enterprise edition of SQL Server 2008, rebooted and while installing standard edition, I get the below error saying "You SQL server 2008 installation completed with failures. Some or all identity
references could not be translated"
Bit of background. This server has another express instance of SQL Server 2008. I have
used local system account, network service as well as our general SQL service account, but I get the error towards the end of the installation and it fails saying “Some or all identity references could not be translated.”
I am installing a named instance with the same name as before but fails. I have tried
creating a new test instance that fails too. Any ideas? I have uninstalled SQL enterprise edition from
Add and Remore Programs/Programs and Features. I've also run the Windows Installer CleanUp Utility but no joy.
Cheers -
Recently installed SharePoint 2013 RTM, on the newsfeed page an error is displayed, and no entries display in the following or everyone tabs.
"The operation failed because the server could not access the distributed cache."
Reading through various posts, I've checked:
- Activity feeds and mentions tabs are working as expected.
- User Profile Service is operational and syncing as expected
- Search is operational and indexing as expected
- The farm was installed based on the autospinstaller scripts.
- Don't believe this to be a permissions issue, during testing added accounts to the admin group to verify
Any suggestions are welcomed, thanks.
The full error message and trace logs is as follows.
SharePoint returned the following error: The operation failed because the server could not access the distributed cache. Internal type name: Microsoft.Office.Server.Microfeed.MicrofeedException. Internal error code: 55. Contact your system administrator
for help in resolving this problem.
From the trace logs there's several messages which are triggered around the same time:
http://msdn.microsoft.com/en-AU/library/System.ServiceModel.Diagnostics.TraceHandledException.aspxHandling an exception. Exception details: System.ServiceModel.FaultException`1[Microsoft.Office.Server.UserProfiles.FeedCacheFault]: Unexpected exception in
FeedCacheService.GetPublishedFeed: Object reference not set to an instance of an object.. (Fault Detail is equal to Microsoft.Office.Server.UserProfiles.FeedCacheFault)./LM/W3SVC/2/ROOT/d71732192b0d4afdad17084e8214321e-1-129962393079894191System.ServiceModel.FaultException`1[[Microsoft.Office.Server.UserProfiles.FeedCacheFault,
Microsoft.Office.Server.UserProfiles, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c]], System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089Unexpected exception in FeedCacheService.GetPublishedFeed: Object
reference not set to an instance of an object..
at Microsoft.Office.Server.UserProfiles.FeedCacheService.Microsoft.Office.Server.UserProfiles.IFeedCacheService.GetPublishedFeed(FeedCacheRetrievalEntity fcTargetEntity, FeedCacheRetrievalEntity fcViewingEntity, FeedCacheRetrievalOptions fcRetOptions)
at SyncInvokeGetPublishedFeed(Object , Object[] , Object[] )
at System.ServiceModel.Dispatcher.SyncMethodInvoker.Invoke(Object instance, Object[] inputs, Object[]& outputs)
at System.ServiceModel.Dispatcher.DispatchOperationRuntime.InvokeBegin(MessageRpc& rpc)
at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage5(MessageRpc& rpc)
at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage31(MessageRpc& rpc)
at System.ServiceModel.Dispatcher.MessageRpc.Process(Boolean isOperationContextSet)System.ServiceModel.FaultException`1[Microsoft.Office.Server.UserProfiles.FeedCacheFault]: Unexpected exception in FeedCacheService.GetPublishedFeed: Object reference not
set to an instance of an object.. (Fault Detail is equal to Microsoft.Office.Server.UserProfiles.FeedCacheFault).
SPSocialFeedManager.GetFeed: Exception: Microsoft.Office.Server.Microfeed.MicrofeedException: ServerErrorFetchingConsolidatedFeed : ( Unexpected exception in FeedCacheService.GetPublishedFeed: Object reference not set to an instance of an object.. ) : Correlation
ID:db6ddc9b-8d2e-906e-db86-77e4c9fab08f : Date and Time : 31/10/2012 1:40:20 PM
at Microsoft.Office.Server.Microfeed.SPMicrofeedThreadCollection.PopulateConsolidated(SPMicrofeedRetrievalOptions retOptions, SPMicrofeedContext context)
at Microsoft.Office.Server.Microfeed.SPMicrofeedThreadCollection.Populate(SPMicrofeedRetrievalOptions retrievalOptions, SPMicrofeedContext context)
at Microsoft.Office.Server.Microfeed.SPMicrofeedManager.CommonGetFeedFor(SPMicrofeedRetrievalOptions retrievalOptions)
at Microsoft.Office.Server.Microfeed.SPMicrofeedManager.CommonPubFeedGetter(SPMicrofeedRetrievalOptions feedOptions, MicrofeedPublishedFeedType feedType, Boolean publicView)
at Microsoft.Office.Server.Microfeed.SPMicrofeedManager.GetPublishedFeed(String feedOwner, SPMicrofeedRetrievalOptions feedOptions, MicrofeedPublishedFeedType typeOfPubFeed)
at Microsoft.Office.Server.Social.SPSocialFeedManager.Microsoft.Office.Server.Social.ISocialFeedManagerProxy.ProxyGetFeed(SPSocialFeedType type, SPSocialFeedOptions options)
at Microsoft.Office.Server.Social.SPSocialFeedManager.<>c__DisplayClass4b`1.<S2SInvoke>b__4a()
Microsoft.Office.Server.Social.SPSocialFeedManager.GetFeed: Microsoft.Office.Server.Microfeed.MicrofeedException: ServerErrorFetchingConsolidatedFeed : ( Unexpected exception in FeedCacheService.GetPublishedFeed: Object reference not set to an instance of
an object.. ) : Correlation ID:db6ddc9b-8d2e-906e-db86-77e4c9fab08f : Date and Time : 31/10/2012 1:40:20 PM
at Microsoft.Office.Server.Microfeed.SPMicrofeedThreadCollection.PopulateConsolidated(SPMicrofeedRetrievalOptions retOptions, SPMicrofeedContext context)
at Microsoft.Office.Server.Microfeed.SPMicrofeedThreadCollection.Populate(SPMicrofeedRetrievalOptions retrievalOptions, SPMicrofeedContext context)
at Microsoft.Office.Server.Microfeed.SPMicrofeedManager.CommonGetFeedFor(SPMicrofeedRetrievalOptions retrievalOptions)
at Microsoft.Office.Server.Microfeed.SPMicrofeedManager.CommonPubFeedGetter(SPMicrofeedRetrievalOptions feedOptions, MicrofeedPublishedFeedType feedType, Boolean publicView)
at Microsoft.Office.Server.Microfeed.SPMicrofeedManager.GetPublishedFeed(String feedOwner, SPMicrofeedRetrievalOptions feedOptions, MicrofeedPublishedFeedType typeOfPubFeed)
at Microsoft.Office.Server.Social.SPSocialFeedManager.Microsoft.Office.Server.Social.ISocialFeedManagerProxy.ProxyGetFeed(SPSocialFeedType type, SPSocialFeedOptions options)
at Microsoft.Office.Server.Social.SPSocialFeedManager.<>c__DisplayClass4b`1.<S2SInvoke>b__4a()
at Microsoft.Office.Server.Social.SPSocialUtil.InvokeWithExceptionTranslation[T](ISocialOperationManager target, String name, Func`1 func)
Microsoft.Office.Server.Social.SPSocialFeedManager.GetFeed: Microsoft.Office.Server.Social.SPSocialException: The operation failed because the server could not access the distributed cache. Internal type name: Microsoft.Office.Server.Microfeed.MicrofeedException.
Internal error code: 55.
at Microsoft.Office.Server.Social.SPSocialUtil.TryTranslateExceptionAndThrow(Exception exception)
at Microsoft.Office.Server.Social.SPSocialUtil.InvokeWithExceptionTranslation[T](ISocialOperationManager target, String name, Func`1 func)
at Microsoft.Office.Server.Social.SPSocialFeedManager.<>c__DisplayClass48`1.<S2SInvoke>b__47()
at Microsoft.Office.Server.Social.SPSocialUtil.InvokeWithExceptionTranslation[T](ISocialOperationManager target, String name, Func`1 func)Thanks Thuan,
I've restarted to the Distrubiton Cache servicem and the error is still occuring.
The AppFabric Caching Service is running under the service apps account, and does appear operational based on:
> use-cachecluster
> get-cache
CacheName [Host]
Regions
default
DistributedAccessCache_1e9f4999-0187-40e8-aa92-f8308d47d6e9
DistributedActivityFeedCache_1e9f4999-0187-40e8-aa92-f8308d47d6e9
DistributedActivityF [SERVER:22233]
eedLMTCache_1e9f4999 LMT(Primary)
-0187-40e8-aa92-f830
8d47d6e9
DistributedBouncerCache_1e9f4999-0187-40e8-aa92-f8308d47d6e9
DistributedDefaultCache_1e9f4999-0187-40e8-aa92-f8308d47d6e9
DistributedLogonToke [SERVER:22233]
nCache_1e9f4999-0187 Default_Region_0538(Primary)
-40e8-aa92-f8308d47d Default_Region_0004(Primary)
6e9 Default_Region_0451(Primary)
DistributedSearchCache_1e9f4999-0187-40e8-aa92-f8308d47d6e9
DistributedSecurityTrimmingCache_1e9f4999-0187-40e8-aa92-f8308d47d6e9
DistributedServerToAppServerAccessTokenCache_1e9f4999-0187-40e8-aa92-f8308d47d6e9 -
Encryption failed because its identity could not be confirmed
Hello. I've been having this issue from time to time; I'm trying to connect to another computer which has both *Remote Management* and *Remote Login* activated. On this computer I got *Encrypt all network data (more secure)*, and for some reason after I try to connect to another computer (that has Remote Login activated) I keep getting this error:
Connection failed because its identity could not be confirmed. This could represent a security problem, or your SSH known_hosts file may be out of date.
Disable the "Encrypt all network data" security setting or update your SSH known_hosts file.
How would I update the SSH known_hosts file? And I thought all this was made automatically? I used to be able to do this before, but its not working lately.Just found the answer:
http://support.apple.com/kb/TA27368
On the admin computer (Mac OS X client computer), choose Go to Folder from the Finder's Go menu.
Type in the path name to your home folder adding /.ssh to the end of the path. example:
/Users/username/.ssh where username is your short name.
Inside the .ssh folder, open the known_hosts file.
Locate the Servers IP and or its fully qualified Domain name and delete it and the associated characters.Example:
example.example.com,192.104.192.118 ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAIEAutfhNudfFzZ00dyrU5O7/Y1wYhkhVJTSlNLqFROuvkmsB39Y8/> q47cQzdFqRfxsAlirDQKWW2xfr8qAKormuz7fT7so1myuanG24IYPwWmnZdLa3MdQ2zrWDkw672TZUT PBErrZYetej+KnU500mOcvdHjsj0SyPkqVRdPAXs=
Note: These characters can wrap to several lines.
Save and close the file.
Message was edited by: Adrian Chen -
Could not make connection to source system
Hello Experts,
I am trying to fetch data based on selection for last month in info-package but when I try to enter selection (pull down button), I get error message - "Could not make connection to source system..."
Any idea why this message?
I have already checked connection to ECC - is fine.
Datasource is replicated.
Also if I try to run info-package without selection - I am getting yellow status, No data fetched. RSA3 shows many rows but Info-package to data (Full extraction.)
Regards,
SMSrini/Vikram,
user credential is good. sm59 connection is good. there is data in selection as RSA3 fetches rows in ecc.
when I run any info-package - I am getting yellow status? No data while rsa3 indicate data for Full update?
why so?
I am more of design person, not much into hands-on - so seeing these error for first time.
Q1) if a package is already schedule - let us sat thru data source 2lis_11_vaitm. Now I want to go back and retrieve last month data already extracted... once again. I should be able to pull this data in new infopackage using Full update - data selection option.
Q2) - rsa3 should fetch data based on set-up tables, so any infopackage based on Full update mode - should fetch data - independent of any other infopackage.
q3) we need to do delete and fill-set-up table - only if extract structure is changed? right?
regards, sm -
Could not make connection to 11g PS1 BAM from Jdev 11.1.1.2.0
Hi,
Could not make a connection to 11g PS1 BAM store from Jdev 11.1.1.2.0.
gave the same host and port details for BAM web host/BAM server host(specified in BAM server properties on the server) in the BAM connection details.
gives the following error when testing the connection.
Testing HTTP connection ... success.
Testing Data Object browsing ... success.
Testing JNDI connection ... failed.
Failed to establish a connection to "ewftwn58.ebiz.verizon.com" at port 9001;
Please verify BAM Server Host & JNDI Port.
2 of 3 tests successful..
i have tried by giving host name and IP address but still getting this error.
Thanks in Adv.
Regards,
Chaitu.I am getting this same problem with PS2 11.1.1.3. This works on my single node environment, but not on our clustered environment. Same error as chaitu
Testing HTTP connection ... success.
Testing Data Object browsing ... success.
Testing JNDI connection ... failed.
Failed to establish a connection to "vprbamch1vhn1.mfltest.co.uk" at port 9001;
Please verify BAM Server Host & JNDI Port.
2 of 3 tests successful.
I have checked my proxy settings in JDev - I have included *.mfltest.co.uk.
I have checked my adapter config and it all seems correct.
Anyone find out what was wrong with their configuration when they get this issue.
Mark.
Edited by: marksimpson on Sep 1, 2010 6:02 PM -
EVERY start-up I have to wait while Firefox says 'installing update' and than 'The update could not be installed. Please make sure there are no other copies of Firefox running on your computer, and then restart Firefox to try again' while there are no other versions running!
It was due to using an old version of Adobe Air. There really should be a tighly coupled error that either updates Adobe Air for me, or links me to the update. I was only able to find the solution using intuition as a techy.
Now I can install the Muse demo. -
Adobe AIR could not be installed because another application is already being installed
OS Windows XP
If I try to start a new setup I receive the following message:
"Adobe AIR could not be installed because another application is already being installed. Complete the first installation before proceeding with this one."
This is the messagge when I try to remove Adobe Air 1.0 from Control panel:
"Another installation is already in progress. Complete that installation before proceeding with this install."
This is the log file:
[2011-04-08:19:59:21] Runtime Installer begin with version 2.6.0.19120 on Windows XP x86
[2011-04-08:19:59:21] Commandline is:
[2011-04-08:19:59:21] No installed runtime detected
[2011-04-08:19:59:23] Starting runtime install. Installing runtime version 2.6.0.19120
[2011-04-08:19:59:24] Installing msi at d:\docume~1\carlo~1.zan\locals~1\temp\air78.tmp\setup.msi with guid {AFF7E080-1974-45BF-9310-10DE1A1F5ED0}
[2011-04-08:19:59:27] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1618" errorID=5008]
[2011-04-08:19:59:27] Rolling back install of d:\docume~1\carlo~1.zan\locals~1\temp\air78.tmp\setup.msi
[2011-04-08:19:59:27] Rollback complete
[2011-04-08:19:59:27] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1618" errorID=5008]
[2011-04-08:19:59:28] Runtime Installer end with exit code 7
In the past I had problems with a virus and I removed some voices on regedit. I think I've combined some mistake.Hi,
I'm sorry you're having problems installing/uninstalling air. Have you tried rebooting to see if that resolves the issue?
If it still fails, can you enable MSI logging using the instructions found on the following page and then post the msi log contents for review?
How to enable Windows Installer logging
Thanks,
Chris -
Whenever I try to open an Adobe file I get this message:
Adobe Reader could not open ..... because it is either not
a supported file type or because the file has been damaged
(for example, it was sent as an e-mail attachment and wasn't
correctly decoded). This is driving me nuts !! Is there an Adobe
product that I can purchase that will make my Adobe Reader
work??? Right now it is useless to me and I have an important
download taht was sent as an Adobe download file and after
I downloaded the file Adobe Reader refuses to open it.
Please Help!!!!I am having the same problems!!! How can a person get help from ADOBE? Or do I cancel and find a different program for converting.
-
Receiving error message using current Maverick version: "Adobe Reader could not open '***.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded).". Is fix the same as on previous OS versions?
Back up all data before making any changes. Please take each of the following steps until the problem is resolved.
Step 1
If Adobe Reader or Acrobat is installed, and the problem is just that you can't print or save PDF's displayed in Safari, you may be able to do so by moving the cursor to the the bottom edge of the page, somewhere near the middle. A black toolbar should appear under the cursor. Click the printer or disk icon.
Step 2
There should be a setting in its preferences of the Adobe application such as Display PDF in Browser. I don't use those applications myself, so I can't be more precise. Deselect that setting, if it's selected.
Step 3
If you get a message such as ""Adobe Reader blocked for this website," then from the Safari menu bar, select
Safari ▹ Preferences... ▹ Security
and check the box marked
Allow Plug-ins
Then click
Manage Website Settings...
and make any required changes to the security settings for the Adobe PDF plugin.
Step 4
Triple-click anywhere in the line of text below on this page to select it, the copy the selected text to the Clipboard by pressing the key combination command-C:
/Library/Internet Plug-ins
In the Finder, select
Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens by pressing command-V, then press return.
From the folder that opens, move to the Trash any items that have "Adobe" or “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari.
Step 5
The "Silverlight" web plugin distributed by Microsoft can interfere with PDF display in Safari, so you may need to remove it, if it's present. The same goes for a plugin called "iGetter," and perhaps others—I don't have a complete list. Don't remove Silverlight if you use the "Netflix" video-streaming service.
Step 6
Do as in Step 4 with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari. -
Adobe Reader could not open 'April-15th-2014-Messenger.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded).
Most likely http://helpx.adobe.com/acrobat/kb/pdf-error-1015-11001-update.html
-
Can anyone assist me? I keep receiving this message when I download my ebook ''Adobe reader could not open .....acsm because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't decoded).'
Much appreciatedI think you should ask in the Digital Editions forum, Adobe Digital Editions
-
I coach youth soccer and use a PDF template to save my sessions in. Today I got this message when trying to open one of my sessions.
Adobe Reader could not open 'NSCAAInteractiveSessionPlan.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded).
How can I fix this? I have not done anything I don't normally do.What is your operating system? Reader version?
Maybe you are looking for
-
I understand that Oracle 10g will rewrite your CURSOR FOR LOOP statements into a BULK COLLECT statement. I am contemplating no longer explicitly writing the BULK COLLECT from now on as it reduces the number of lines of code and greatly simplifies cod
-
Deployment Package problems DMS 5.2.1
All just an FYI for anyone else having issues with a deployment package. This is on DMS 5.2.1 If your presentation references a video file from the Media library that has a space in the Title the deployment does not complete. No error - just does not
-
What is the advantage in Maintaing the master data if it can be directly ..
Hi, When looking for possible values in an object, I see that it has 20 possible values that can be selected while in BEx. But when I go to the object itself under the InfoObject tree(in rsa1), with a hope to maintain master data, I do not find "Main
-
which is the best way to call a scotland mobile phone from skype? i been using pay as u go credit and its 8 cents a min and was wondering if a monthly thing or a subscription is the way to go
-
Hi - We have a need to load-balance requests within the same VLAN, but need to make sure it only happens then. We have multiple web servers all members of the same subnet, these servers are grouped differently in 5 different VIPS whose IPs are also p