Preview for Excise Inv. w/o doing J1IP

Dear All,
Can anybody tell me how do i configure my output type for Billing, so that my system can generate a print preview even for Excise Invoice without doing J1IIN & then doing J1IP ?
Rgds,
Indrajit Dey

Dear Indrajit
If you want to create Excise Invoice automatically at background whenever you do billing in VF01, the same can be done.
Go to IMG Path, select Logistics-General --> Tax on Goods --> India --> Basic Settings --> Maintain Excise Groups.
Here, for the combination of Excise Groups and Plant, there is a field "Create EI". If you select this box, Excise Invoice will be generated automatically.
Thanks
G. Lakshmipathi

Similar Messages

Accounting entries for excise invoice for purchase returns in J1IS

Dear Friends
1) I recorded an excise invoice for goods receips in J1IEX . The accounting entry is
Input BED a/c   DR
Input ECS a/c   DR
Input H.css A/c   DR
CENVAT clearing   CR
2) There were some damaged items and same returned to vendor. I did RETURN Delivery in MIGO. The excise invoice in J1IS gives error " BALANCE IN TRANSACTION CURRENCY". Here I used Ref document type - MATD
QUESTION :
What is the Excise transaction type   for ' other outward movement' in J1IS to which I should assign the excise accounts   to reverse    (1) above. Is it OTHR or GPRO.
Thanks
kamala

Dear Mathews,
It is not capital goods. Also if I do a JV in J1IH, the entry goes and is as below :
Cenvat clrg   DR,   Input -BED /E.cess/ S.cess   CR
But J1IS does not save, though I have assigned all said accounts in 'Excise accts per excise transation'   for OTHR. Also I read in wiki that the entry for purchase return excise inv in J1IS is ' CENV CLRG ....DR ,   CENV RECEIVABLE ...CR ' .If so, then do i creat new GL for Cenv Receivable ? What is its effect on FORTNIGHTLY UTILIZATION
thanks for telling
kamala
Edited by: Kamala Surianarayanan on Mar 6, 2009 6:38 AM
Edited by: Kamala Surianarayanan on Mar 6, 2009 6:38 AM

Error occuring during excise inv creation.

Dear sd gurus
Plz find the error as under.
"Error in allocating Excise invoice numb
not found Number object J_1IEXCLOC"
I have maintined no range in J1I9.
Also I want to know the a/c effects while creation of excise inv. while utilization. while doing payment to excise authorities.
Regards
nitin

Dear Vijay
Please let me know for which type of sales, you are trying to create excise invoice whether for domestic or for local.
For information, to maintain number ranges for excise invioces, you have to go to SNUM or SPRO and select any of the below objects required by you
- J_1IEXCEXP if it is for Exports
- J_1IEXCLOC if it is for Domestic
and select NUMBER RANGE on top. It will ask for "Series Group". Give the respective plant's series group and click "Change intervals".
Now give some value in the field "No" followed by year and number range and save.
thanks
G. Lakshmipathi

Excise Inv. releasing to accounting---J1iv

Hi,
When i am doing J1IV(Excise Inv. releasing to accounting) Transaction, i am getting an error Document Type not defined, i think this is could be a FI Document so please guide me where to define, assignment and necessary Customizing for that!
Thanks in advance
Edited by: vijay vijay on Oct 16, 2009 8:15 AM

Hi
Refer the path
IMG>Logistics-General>Tax on Goods Movement>India>Business Transactions>Outgoing Excise Invoice>Assign Billing Type to Delivery Types
regards
Sanil Bhandari

Aperture reprocesses previews for all videos every time I open it

Hello,
I use Aperture to organise all my videos shot on Canon 7d and an old HD Cam (705 vids, 381GB). Whereas my stills are stored in the aperture library, the videos are imported into eparate folders named after each project inside one master video folder.
I do this because it is an easy way to work with all of them in FCP (X), importing them without moving them, keywords from the folders coming across (and also because FCP used to incorrectly display the meta data- date and time imported shown as the file's creation details, when accessed via the aperture library menu from FCP, this bug has probably since been corrected)..
After restoring from a time machine back up recently, Aperture now reprocesses previews for all 705 movies every single time I open it, reboot or not. It doesn't hang on any particular file or crash but (as it's a mid 2010 MBP) simply slows Aperture down below useable for a few mins until they are done.
Post import processing set to camera previews, new projects always create previews ticked.
What am I doing wrong please? Should I attempt to fix the database?
Best
Ben

As a work-around - hold down the shift-key, when launching Aperture. That will defer the generation of Previews, so you can start working immediately.
What is your Aperture version and MacOS X version?
After restoring from a time machine back up recently, Aperture now reprocesses previews for all 705 movies every single time I open it, reboot or not.
Was Aperture the only thing you restored from a Time Machine backup? Or did you restore more of your system? If you reinstalled or upgraded the system, there may be now video codecs missing. In that case check, if reinstalling additional video codec (Perian, Flip-4-Mac, or similar) may help.
If the reinstalled aperrture library has been created on a different mac, there may be permission problems after restoring from Time Machine. Check the permissions and ownership on your video folders.
Are you touching the videos in any way, when using them in Final cut? Using stabilize or something? If the " last modiied " date is changed by Final Cut, this might prompt Aperture to recreate the preview.
-- Léonie

MIGO-Capturing problem-Item is not available for Excise invoice,deselect th

Hi Gurus
while doing MIGO and part 1 posting am getting following error
MIGO-Capturing problem-Item is not available for Excise invoice,deselect the item
kindly help in this
Maruthi

hi
check all settings in J1ID
or
in po did u got ur all values correctly for excise cess and hcess
if yes then check ur vendor excise details in j1id
if above setting are done properly then check ur CIN setting in spro>log gen>tax on goods movement >india>account determination >specify excise acct as per transaction/specify G/L acct as per transaction
regards
kunal

Maintain Vendor for excise Invoice in STO

Hi Friends
I am doing GR against Stock transport Order and getting error as Maintain vendor for excise Invoice
I created vendor master for plant then i maintained additional purchasing data in purchasing view there i did settings as follows
Purchasing View --> Extra --> Add purchasing data --> Selected data retention at plant level
Purchasing view --> Alternative Data --> Selected purchasing here i maintained supplying plant code
Same procedure i did for receiving plant also.
After that i maintained vendor master recored excise details in J1id
Still i am getting same error
Please give your valuable inputs
Regards
Vivek
Edited by: Supergene on Jul 24, 2008 1:01 PM

Hi,
Its not necessary to selected data retention at plant level.
Have you assigned Excise Indicator (For e.g. "1") to the Vendor Master, also maintain the ECC No, Excise Reg, Division, Commissionarate, LST, CST, etc....
Then it will work for new transactions. (For old, I think it will not work)

My 3.4.5 has ~ 35000 jpg masters. I have set aperture not to create previews on import and have ensured "maintain previews" is not ticked. Every time I start aperture it insists on creating previews for ~ 4300 images. Why?

Having had the previews created I selected all photos and "delete previews". It did this quickly and no more previews being created. Once aperture is closed and then re-opened aperture immediately sets about creating the previews for the same photos. I don't understand why this should be happening.
This is occuring on my Mackbook Air (Aug 2012) which has 256 GB storage. I am fast running out of space as I am using "Managed Masters". I intend to make the masters referenced by relocating them to an external HDD but before doing this would like to clear up this problem first. I keep my Vault on the external HDD and have Time Machine and Time Capsule. When I have relocated the masters to the external HDD I intend that TM backs the external HDD to the TC. I tink that I will use the second partition on the external HDD for Carbon Copy Cloner to back up the Mackbook Air.
Any help or advice warmly welcomed.

Frank
Many thanks for your input.
Following your advice I have selected all the projects individually and checked the status of Mantain Previews. Some were indeed marked up for Mantail Preview so I have unmarked them.
I have also selected Photos and deleted previews and also repeated this for My Projects.
Checking the Get Info for the Preview folder in Aperture Library in Finder this now tells me that I have zero bytes for 564 items.
Close and then reopen Aperture and it regenerates these564 previews in the blink of an eye. I haven't been able to locate these photos yet. I know there are about 120 in facebook and 10 in photostream but dont know where the rest are.
It seems the issue is not with Aperture but with myself and not understanding Aperture sufficiently well
Do you see the problem this way?

I had the developer preview for IOS 6 on my phone, and just got a message telling me that my operating system is no longer active. How do I get my phone activated again?

I had the developer preview for IOS 6 on my phone, and just got a message telling me that my operating system is no longer active. How do I get my phone activated again?
I had the developer preview installed. Never had to update to the release version of the OS. Now, the preview has expired, and I cannot use my phone because my iTunes reads my OS as being current, but my iPhone cannot active. Any ideas on how to fix this issue?

If I Google for Michael Superczynski, first match tells "Michael Superczynski's Profile : Apple Support Communities". It in fact does a lot of work there even if not paid.
And yes we do not have disagreement about "official apple developers". Problem is that Apple screwed our devices because we are "official apple developers" and did effort to stop us getting proper help. I unbricked my ipad and iphone thanks to unofficial help. Thank you who wrote this unofficial help and "no thanks" for apple for ruining my access to my devices. My mistake was assuming that "update" button on my devices works. It did not because it always told "Your device has latest IOS6 installed" until it bricked yesterday.
If Apple does not want to listen us, continue do delete post, blame us installing your software and yes we stop buying your devices and developing for them.
Tonu

Maintain number range object for excise grp

Hi Gurus,
During stock transfer, while doing Goods receipt I am getting the below error
"Maintain number range object for object J_1IRG23D, year 2010, excise group"
Could anyone please tell me the trans code for maintaining no range for excise group...
Thanks,
Raja

Go to J1I9 T Code for a particular object object J_1IRG23D, execute and then give the excise group and maintain the number series.
Regards,
Nagesh
Edited by: Nagesh MS on Dec 20, 2010 3:59 PM
Edited by: Nagesh MS on Dec 20, 2010 3:59 PM

So are we to assume that the preview for developers is the WP 8.1 update intended for Lumia Icon users? Why is it taking so long for this update to be released?!

Of those of you that have tried out the preview for developers on the Lumia Icon, what issues have you seen from it? Does it in fact void your warranty?

yleetsbob wrote:
I have largely given up on this device, I think that I made mistake trying out a Windows phone. I really miss my Android device and feel like I have made a 2 year mistake.
I don't think you should give up on Windows Phone. I think you should instead give up on Verizon. Lets say you had an android device, Verizon could do the same thing and hold up an important update that you're waiting for. AT&T is much quicker to release Windows Phone updates so you may want to try them next time.For example, you can see on this page Availability in North America - Nokia that AT&T has released the update for their top two phones the 1020 and 1520. The Verizon icon is almost the same as the Lumia 930 which is the international version. The 930 has been on Windows Phone 8.1 for many months. Windows Phone 8.1 has lots of new features including the notification center and Cortana. It's a shame that Verizon is too lazy, too slow or just doesn't care. I'm probably going to start installing the developer preview soon and you could do the same. Basically, you sign up for a free developer account. Then install the developer preview app to get the updates. Google has no such option for android uses so if Verizon were holding back an android update you'd be worse off. At least Microsoft gives us a stupid carrier work around... It's annoying but then you can enjoy your Windows Phone with out having to wait for Verizon whom doesn't care. They haven't even said a word about it which = worst carrier ever in my opinion.

I want a preview for only the pick image

I sync my photos with an iPod. As such I only want to sync the images that are picks. I edit virtually every single image in my library, so as it is if I have automatic generation of previews turned on, all the images including non-pick ones in each stack will have a preview. This causes 2 or more versions of the same image to be put onto the iPod not just the best one.
For the past few months I have had automatic generation of previews turned off, and I generate them by hand after I finish editing a batch. This is a little time consuming and I often either forget to generate the previews or somehow I manage to generate previews for all images in a stack. Aperture doesn't help because it doesn't show which images have previews and which don't.
Rather than manually going through each stack and seeing which images have previews, I'd like to automate the process somewhat to make sure that only the picks have previews. Is there an easy way to do this?
I've thought about selecting all, then opening all stacks, then inverting the selection, and deleting previews from those selections. Then inverting the selection again and updating the previews. I'm not sure if this would work and I'm a bit scared to do this on a large library (opening all stacks in a selection of 10000 stacks could take a few days?)
I wish Aperture had better handling of previews in this regard.

Problem with creating a smart album is that all images would show up in that one album on the iPod and I want them somewhat separated, even though no hierarchy of folders on the ipod makes that a bit of a paint too.
I am currently trying the select/invert method. I'm doing it one album at a time so it's more manageable. At the same time I'm able to make sure I have the correct image as my pick, and also forces me to reexamine what photos I have in my albums and delete any stuff that isn't worthy It's working pretty well, though it is time consuming. Once I'm done I'll have to be careful to make sure only the picks get a preview.

Sales Returns for Excisable Finished Stock

Dear All,
I have read a post below with regards to sales returns for finished stock which updates RG1 register, as I understand RG1 register is a quantity register, and the movement types define the sales returns qty wise, However I have the following queries
If I send 10 qty of material to my customer the same is captured through my normal sales scenario where I create an outgoing excise invoice, however if the customer sends 3qtys back then I create Return Sales Order, Return Inbound Delivery and a Credit Memo, however from an excise point of view I need to use the t-code J1IH as suggested in the below post and click on additional excise and give the required details. However at the bottom there is a radio button tab RG23 A and RG23 C where in the system by default it is selected as RG23A.
My question is I will input an outgoing excise invoice where I need to give partial credit for the part qtys which the customer has returned and if I do click on RG23A tab( Since there is Radio Button) does it have any impact on the register RG23A value wise, as per my understanding RG23A is used from a purchase point of view for raw materials and RG23C is for purchase finished product and why is there no Radio Button indicating RG1 and it does have any impact on other register as well.
Customer Returns for Excisable Finished materials RG1 registers update
Kind Regards
Atul Keshav
Edited by: Gojolly99 on Jul 10, 2011 8:21 AM
Edited by: Gojolly99 on Jul 10, 2011 8:38 AM

Dear Siddhartha,
This functionality was available in standard it self, Chose order type RE, Configure Delivery (PGR) and billing documents for the order type. It will reversal automatically the excise and sales etc..
In sales, customer will get debit and sales will get credit, so once you can take return this will get reverse including excise, sales and cst / vat.
if it is use ful reward me
Reg
Eswar

1 master, many versions, 1 preview for each version?!!

One of the advantages of non destructive editing is to contain the increase of disk space required for having multiple versions of 1 master file (which is the one that takes most of the space on the hard drive). All this may vanish!
With aperture 1.5 you run the risk to have one preview for each version and, consequently, many enormous files piling up. Even if you do not actively create previews, they are created each time you run a slide show, and this takes up time and space!!
Did they find a new strategy to make you have bigger and bigger libraries and buy bigger and bigger disks?
Any way to avoid previews at any time?
maxbor

I think the previews make sense when either you want to share your photos with iLife or iWork, or when you have your raw files in an external HD.
This is how I'm minimazing the use of previews, just to share with iLife my favorite pics:
In preferences, I switch off "New Projects Automatically Generate Previews", "Share Previews With iLife and iWork" is on.
In the projects panel, I select the first project, I click on the wheel on the top right corner of the projects panel and untick "Maintain Previews". Continue doing this with every project.
Now I create two smarts albums, one with all the images rated 4 or 5* and other one with images rated 3* or lower. I go to the 4/5* one, select all the images there, right click on them and select "Update Previews". I go to the 3* or lower album, select all the images, right click on them and "Delete Previews".
From now on, all I have to do it's everytime I'm done with a project, in its browser I search for 4* or better rated images and "Update Previews".
No more waste of HD for pics I will never share with iLife or iWork.

Error in Posting of Vendore Excise Inv.

Hi,
I have been facing one error while posing of Vendor Excise Inv. against incoming materials using T.Code: J1IEX.
When I try to post Excise Inv. against 'Vendor Excise Inv. / Internal Excise Inv.' I am getting Error msg "All Part I entries have been canceled for excise invoice 28 2010". (Where 28 is Vendor Excise Inv. & 2010 is Excise Year.)
As per the Error msg. I checked GR but it is not canceled.
Can any one guide me why I am getting this error msg. ?
Thanks
Vivek

hi check following
Logistics General > Tax on Goods Movment > India > Bussiness Transaction > Incoming Excise Invoice > Specify Which Movement Types Involve Excise Invoices
All Part I entries have been canceled for excise invoice
Re: Unable to cancel excise invoice.
Reverse the material document before cancelling the excise invoice : J1IEX

Preview for Excise Inv. w/o doing J1IP

Similar Messages

Maybe you are looking for