Preview for MacOS X: pictiure could not be saved

A .jpg file could not be saved/autosaved/duplicated after editing. What could that be? Is it related to certain .jpg file properties?

Are you using "Documents & Data" in iCloud?

Similar Messages

Preview Error, "The Document "name" could not be saved

Hello!
After modifying a file and trying to save, I receive this error. It does not allow me to save as either or to my desktop.
I have tried changing the permissions, but no luck. I tried googling the error in hopes that someone else had encountered this error and had a solution but after days of searching I've come to no avail in my quest.
Any help would be very much appreicated!!

That's the error I'm getting. His issue is close but not quite the same. I'm not downloading the pciture from outlook (PC's has outlook, Mac's has Entrouage). The issue is that I am trying to edit the picture from the SAN and I was able to do a basic "save" and it would save the image but now all I get when I try to save it in any way is the above error (was the image included at the top) I've tryed to save to the desktop/library/SAN/documents; save/save as but nothing seems to work

This pops up when exporting in iMovie "Unable to prepare project for publishing: The project could not be prepared for publishing because an error occurred. (ParamErr: error in user parameter list)" I have turned off my Time Machine in terminal.

This pops up when exporting in iMovie "Unable to prepare project for publishing: The project could not be prepared for publishing because an error occurred. (ParamErr: error in user parameter list)" I have turned off my Time Machine in terminal yet it remains. What do I do, I need your help PLEASE.

Hi
Error -50 paramErr Error in user parameter list
Can there be any external hard disks - if so How is/are it/they formatted ? Must be Mac OS Extended (hfs) if used for Video.
UNIX/DOS/FAT32/Mac OS Exchange - works for most but not for VIDEO.
What this means in Your situation is above me.
• free space on internal boot hard disk? How much ?
Video codec
• streamingDV, AIC etc. (not .avi, .mp4, .m4v, .wmv etc as they are containers not codecs)
Pictures
• in what format ? .jpg, .bmp, .tif, else ?
Audio
• from where/what format ? iTunes, .avi, .mp3, .aiff, else ?
The "com.apple.iMovie.plist" file
Many users has not observed that there are TWO libraries.
• Library - at root level
• Library - in user/account folder - THIS IS THE ONE to look into
from Luke Burns
I fixed the problem.. but it was very, very strange. I had a very long section for credits and set the line spacing to 1.0.. for some reason this caused it. I removed it, and it worked fine. I put it back, and I couldn't preview or play the video.
I don't know why that could cause that big of a problem, but it did..
Klaus1
You need more free space on your hard drive.
jonorparkerjon
After phone support from apple I ended up creating a new project and adding all 117 clips back in individually till I found out what clips flagged and would not allow me to export. I had 3 I deleted and replaced and everything works now 1hr after tedious work....
Where do Your material come from
• Camera
• External hard disk
• USB-memory
And all are connected so that iMovie can find it ?
Yours Bengt W

Preview failed because Adobe Muse could not make a connection over HTTP. The most common cause of this is Firewall software which prevents HTTP connections. You may need to change Firewall settings to allow Adobe Muse to make connections.

Preview failed because Adobe Muse could not make a connection over HTTP. The most common cause of this is Firewall software which prevents HTTP connections. You may need to change Firewall settings to allow Adobe Muse to make connections.
no firewall at all, in win 8.1, turned it off for all networks
ftp and publish works just fine

Hi,
Please take a look at this post : Re: Adobe Muse - Preview Failed
Regards,
Aish

Preview failed because Adobe Muse could not make connection over HTTP.

Preview failed because Adobe Muse could not make connection over HTTP.
The most commons cause of this is fire wall software which prevents HTTP connections,
you mai need to change Fire wall settings to allow Adobe Muse to make connections??
Fire Wall is not problem!!
I asked this question a month ago, no one has answered.
does anyone know how to solve this problem?
I apologize for the bad English
thanks in advance

Mac or Windows? What software do you have installed that may be interfering with an application's ability to open an internet connection (i.e. virus checker, anti-malware utility, firewall, etc.).

Unable to prepare project for publishing the project could not be prepared for publishing because an error occurred. (file already open with write permission)

Get this message when I try to publish my iMovie project. "unable to prepare project for publishing the project could not be prepared for publishing because an error occurred. (file already open with write permission)"

See the discussion here:
https://discussions.apple.com/message/16784714#16784714

Unable to prepare project for publishing The project could not be prepared for publishing because an error occurred. (Error in user parameter list) How do I fix this???

Unable to prepare project for publishing
The project could not be prepared for publishing because an error occurred. (Error in user parameter list)
How do I fix this???
I have downloaded my family movies captured on Hi8 video through a Dazzle hollywood DV-bridge to the iMac. Everything went well until I tried to finalize the project.

I'm having the same problem.
When I export (and I want HD quality) I get the error message that
Unable to prepare project for publishing The project could not be prepared for publishing because an error occurred. (Error in user parameter list)
How do I free up more space on my startup disk? My hard drive has 158.61 GB free. Do I need to free up more space?

MIGO-Sales price for material (NL1S ROH1 ) could not be found

Hi Experts
When i doing MIGO , i am getting following Error Message .i.e.,
*Sales price for material (NL1S ROH1 ) could not be found*Message no. M7158
Diagnosis
The sales price valuation is active in the valuation area.
The system could not determine a sales price on the specified posting date for material NL1S ROH1 in unit of entry in plant .
Sales price conditions may not be defined for the material in plant .
Procedure
u2022 If you have a goods receipt for a purchase order or an order, the sales price is taken from the purchase order or the order concerned.
Check the sales price in the purchase order or the order.
u2022 if you have goods movements without a reference, you can specify the sales value (sales price including sales tax) manually.
If the screen does not have the field Sales price, then you have a Customizing error: the sales price valuation was activated in the valuation area, but the field selection of the movement type was not changed accordingly. In this case, contact your system administrator.
u2022 Check the definition of the sales price.
Note that for distribution centers, the sales price of the consumer distribution chain maintained in the distribution center's master data is used.
Proceed
If you post this movement without the sales value, the movement will be valuated with value zero. This can change the average sales price.
Please Advice us ...
Thanks in advance
Regards
Rajesh .P

Hello,
Please check the following:
-check with SE16 at table T001K whether you have sales pricing active for your valuation area,does your material belong to a very special material type
-Check SAP Note 84480 ,109881
-No sales price exists, no goods movements can be posted for an article subject to value-based inventory management. You must maintain the sales price in all cases.
Please refer the link below:
http://help.sap.com/erp2005_ehp_04/helpdata/en/12/085e95470311d1894a0000e8323352/frameset.htm
hope the information is helpful
regards

I am trying to send an iMovie project to iDVD and I keep getting the following error msg. "Unable to prepare subject for publishing: The project could not be prepared for publishing because an error occurred. (-43)"

I am trying to send an iMovie project to iDVD and I keep getting the following error msg. "Unable to prepare subject for publishing: The project could not be prepared for publishing because an error occurred. (-43)"

Check out this thread: https://discussions.apple.com/thread/1421870
It may mean you either your Event or your Project. Have you moved any of the files in the Finder by any chance? That error may come up if you moved anything outside of iMovie. Do you get an error message when you choose Share>Export to iMovie (choose medium size) and save it to the Desktop? If you can export it to the desktop, you can pull that file into iDVD separately and still make it work.

Unable to prepare project for publishing. the project could not be prepared for publishing because an error occurred. (project is too long)

I have an imovie project that is less than 20 minutes long. i tried to publish it a couple of times and it seemed like it was finished but it never published. i tried one more time and got an error message saying "unable to prepare project for publishing. the project could not be prepared for publishing because an error occurred. (project is too long)". i know the project isnt too long. i am trying again but the error message only comes up after i waited 2 hours for it to finish publishing. PLEASE HELP

oh and ive tried publishing to almost everything. straight to idvd, to media browser, i tried both hd qualities and also the large quality. no luck with any of those

My apple ID has stolen i asked for rest but i could not get email rest on my email.

my apple ID has stolen i asked for rest but i could not get email rest on my email.
<Email Edited by Host>

The Best Alternatives for Security Questions and Rescue Mail
    a. Send Apple an email request at: Apple - Support - iTunes Store - Contact Us.
    b. Call Apple Support in your country: Customer Service: Contact Apple support.
    c. Rescue email address and how to reset Apple ID security questions.

After downlaoding the lastest software for my iphone, it could not be activated because the phone was showing "No Service". Please want else can i do?

After downlaoding the lastest software for my iphone, it could not be activated because the phone was showing "No Service". Please want else can i do?

Thank you ProjectVRD. But this has not soloved the problem. It still shows no service even with my sim card well inserted. Even tried using sim card of another service provider thinking the problem could be from the service provider, it wasnt working still. PLEASE APPLE HELP ME.................

I bought a mac air yesterday and i was trying to download maverick but i could not do it, i try to download the old version of numbers because i needed for work, but i could not neither, but now when i check to download numbers is asking for to pay?

i bought a mac air yesterday and i was trying to download maverick but i could not do it, i try to download the old version of numbers because i needed for work, but i could not neither, but now when i check to download numbers is asking for to pay?

You are mixing different issues. I will address Numbers.
Has Numbers ever been installed on this new Mac? Did you have the Mac App Store version of Numbers or did you have the DVD version of Numbers?
You should be able to redownload a previous purchase of the Mac App Store version of Numbers from the Purchases pane after signing into your account.
If you had the DVD version, then you will need to install that from the DVD media.

I just tried to sync for the first time and i receieved an error message saying, "Itunes could not backup because backup could not be saved on the compute"??

i just tried to sync for the first time (iohone to PC) and i receieved an error message saying " it iTunes could not backup because backup could not be saved to the computer"

just as i've posted the same issue here hope that someone could give us a hand. I have just swtched from nokia to iPhone for my company cell and i have more than 1000 contacts... it would be murder to create those contacts one by one )))))

[WARNING] skipping exception constructor for java.io.IOException: could not

Hi,
this is happening in osb server output:
[WARNING] skipping exception constructor for java.io.IOException: could not find property corresponding to ctor param 'arg0' on public IOException(java.lang.String,java.lang.Throwable)
[EarFile] Application File : /opt/Oracle/Middleware/user_projects/domains/tests/sbgen/alsbejbtransport/95105653848417/build/ear/META-INF/application.xml
[WARNING] skipping exception constructor for java.io.IOException: could not find property corresponding to ctor param 'arg0' on public IOException(java.lang.String,java.lang.Throwable)
[EarFile] Application File : /opt/Oracle/Middleware/user_projects/domains/tests/sbgen/alsbejbtransport/95109698253471/build/ear/META-INF/application.xmlwhat is this?

Yeah -- what is that? I have same issue during application (on OSB) import from jar file.

Preview for MacOS X: pictiure could not be saved

Similar Messages

Maybe you are looking for