Preview function disabled when importing P2 clips located on ext HD
Hello,
I'm using FCP 5 on a Macbook Pro and an ext HD scratch disc.
When I try to use the preview function when importing a P2 clip located on the ext HD scratch disc the preview function is disabled and I cannot view the clip in the viewer.
However when I transfer the P2 clip onto my Macbook Pro I am able to view the clip in the viewer.
This has recently started happening and I'd be very grateful if anyone has a solution or settings recommendation for me. Thank you for your help with this one - I'm driving myself nuts!
Hello,
Thank you for your help w/ this. Actually the Apple store in Beverly Hills, CA made the recommendation, and sold me this particular brand of hard drive. I told them what I needed it for and they said this was best for the application. I'm sure they'd be delighted to know that the products they carry and recommend are equated w/ Costco photo back up stuff! This has quite made my day.
The bizarre part is that suddenly the preview function was disabled after working perfectly, and I'm not sure I changed anything in my settings either.
Thanks for the heads-up on daisy-chaining the hard drives, I won't do it again.
Similar Messages
-
Premiere Pro CS4 Crashes When Importing HD Clips
I've used Camtasia forever but recently decided to "upgrade" to Premiere Pro when I got my new Macbook. Not being familiar with Premiere at all, I thought I would play with it with a few short clips. I have HD footage of my martial arts class which I shot with my Canon Vixia HG20 and copied it to my Macbook. However, when I imported a few clips into Premiere Pro and try to play it, it hangs. It will play one or two clips and then it stops responding after that.
All in all, it's only about 2 minutes of footage that I've put into Premiere Pro. I have no problems putting the clips into the Timeline but when I try to preview the clips (either in the source monitor or the program monitor windows), Premiere Pro gives me the little rainbow pinwheel and 20 minutes later, it's still spinning around. I bought a 500Gb external hard drive to use as the scratch disk because I thought maybe it was a space issue having everything on my Macbook but I still get the pinwheel. My only solution is to force quit the program.
I have a 2.4GHz Intel Core 2 Duo Macbook Pro on OS X (10.5.6) with 4GB of memory, GeForce 8600M graphics card, and 200GB hard drive. I've read about a of of the crashes on here but didn't really see anything similar to my situation. Any ideas? I spent a lot on Premiere Pro and am not willing to give up on it quite yet.
Please and thank you!17 Mbps is still at the high end, but IMHO they should ultimately work.
Very often with AVCHD, you have to play a clip until it freezes, then wait. If you monitor CPU usage during the waiting time, you'll see that it is quite active. The process using the CPU is the ImporterProcessServer, which has to do some kind of magical stuff to the AVCHD clips in order for them to play and scrub in Pr. Once the IPS is done, you should be able to scrub and play the clip just fine.
Usually you only have to do this once per clip, but sometimes more. Sometimes the work that the IPS does carries over between Pr sessions, and sometimes it doesn't.
Smaller frame sizes and lower bit rates in AVCHD video helps make the editing experience in Pr much better.
My hope is that the upcoming 4.1 update will address some of these AVCHD issues.
-Jeff -
Preview window disabled when capturing FCP
A message comes up in the preview window saying 'preview disabled' even though the vtr os connected properly and can upload video: how do I enable it?
Hello
I use a XM-2. That is the European/PAL version of your camera. I have had this problem since a year. I use a LaCie external 500 GB drive. Sometimes I could work around the problem using the internal drive. But now I think I have solved the problem. At least for me. There are two problems. First see to that you only have Quick Time 7 and not anything left from previuos versions. Look in the Receipts folder where you can find traces of old versions. (There is Apple message about this somewhere). Then shut down the computer, not restart, shut it down completly. Shut down the camcorder. Wait a minut or two so everything is quiet. Then start the camcorder. Wait for a while and then start the computer. When everything is up and running start FCE and hopfully you will not see the message Preview Disabled.
I hope it will work for you
Anders -
FCP 4.5 crashes when importing long clips
After upgrading to a new computer (PowerMac G5 2.7 GHz), my FCP 4.5 has trouble importing DV footage from my Canon GL-1 camera. The program hangs after about 4 minutes of importing a single clip. I have seen that this issue may be related to upgrading QuickTime (using 7.3.0), but still not sure that this is the problem.
Any ideas would be welcome.
I have purchased FCS 2, so I can upgrade, but I was waiting until I complete an unfinished FCP 4.5 project. If upgrading would allow be to still read these 4.5 files and complete it that way, I would. Any ideas would be welcome.
DeanThat might be the issue. WHich is why it is never wise to upgrade a working system. The OPTIMAL system setup for FCP 4.5 is Mac OS 10.3.9 and QT 6.5...although QT 7.1.6 works just fine. When you start upgrading things beyond that, you risk things not working right. What did an upgrade to QT 7.3 get you? Nothing really.
Unfortunately to get BACK to a working version of your system, you'd need to do an Archive and install of your OS...yes, time consuming....sorry.
BUT, you can upgrade to FCS2 and continue to work on those projects. They will convert just fine. I would suggest cloning your system drive first, so you have something to fall back on. ALthough the system isn't working so...you really don't have anything to lose.
Shane -
When importing rendered clips from davinci into premiere they look darker and more contrasty.
After importing the graded and rendered clips from davinci into premiere pro cc they look darker and more contrasty. I've checked the exported files from DaVinci and they look totally fine if you play them with any media player, but when I import them in Premiere Pro CC, they appear darker and way more contrasty than I've graded them in Resolve. Anyone have a solution for that?
Thanks!
AndrewThis is a long-standing and complicated issue. To start with, different media players interpret footage differently. You can hope for the best, but there can be no expectation that footage in one player will look the same in another. Ridiculous, but true. The situation is further aggravated by different display cards and different monitors, and no prevailing standards of how color and levels are interpreted.
In your specific case, you need to look at the waveforms, in Resolve and in PPro. It sounds as if the blacks are being crushed in PPro, which could mean you're monitoring them at 64 in Resolve, but they're being output at 0 or remapped to 0 in PP. This may also relate to whether you've monitoring with data or video levels in Resolve.
Is there a setting in PPro which covers how values are mapped, as data or video? I think so, but just can't recall.... Anybody? Staff? -
After about a month of using Designer 7, the "PDF Preview" item under the "View..." menu is now disabled? Anybody have this problem before or know what might cause it?
Jason,
I think you can turn it back on by right click on the "Body Page" tab and select "PDF Preview" from the pop-up menu. -
audio help
if7yg
What computer operating system is your Premiere Elements 11 running on? If Mac, was your purchase the Adobe Premiere Elements 11 Editor from the Mac App Store?
Be that as it may, what are the properties of the video audio file that you are importing in Premiere Elements 11?
A quick way might be for you to tell us the brand/model/settings of the camera that recorded the video audio file (including the file extension of the file).
When the file reaches the Expert workspace Timeline which is the case
a. no sound, but audio file is represented on Audio 1
b. no sound, audio file not represented on Audio 1
c. no sound, audio file represented on Audio 1 and, when you toggle the Audio Display Style to waveform, you
see or do not see a waveform.
(to the left of the word Audio 1 is a speaker icon...clicking on that icon toggles the audio track display...one of the
two choices is the waveform).
Assuming Premiere Elements 11 on Windows 7, 8, or 8.1 64 bit for now, go to Libraries/Documents/Adobe/Premiere Elements/12 and delete the complete contents of the Media Cache Files Folder that you find there. Then open the program and determine if the audio problem persists. Look to the bottom right of the workspace to observe any "conforming" activity in progress when you import the file.
We will be watching for your follow up.
Thank you.
ATR -
When importing no clips appear
although the DV plays through the iMovie main viewer as usual, using the iMovie controls and so no footage is imported.
I've been using this set up (Panasonic NVGS15) for a while and have had no problems but since I've installed Tiger and iLife and gone over to iMovie HD from good old iMovie I can't seem to get any footage in to the G5. I have repaired disc permission and checked imprting preferences.
Any suggestions much appreciated...
Cheers,
JayDear Sue
Thanks for the suggestion. I tried that a while ago and still haven't got anywhere. I'm wondering, since the DV plays perfectly well in the viewer but isn't then importing into a clip, whether there is either (a) a small glitch somewhere in my iMovie program (I just downloaded the 5.0.2 update to no avail) or (b) there is something wrong with the tape itself (I tried importing it to another machine in the house (an iMacG5) and had the same problem.)
It's driving me potty so thank for your help - all suggestions gratefully received...
Jay -
Why is the alarm function disabled when iPhone is switched off ?
Can anyone explain why iPhone doesn't have this feature ? Most other smartphones do. Many thanks in advance for your replies.
We cannot explain why the iPhone doesn't have this function, but you should use it as wake up alarm turning on the airplane mode so nobody can bother you with calls or texts during your sleep, and when you wake up and your alarm sounds you could turn off the airplane mode.
-
FCP 10.1.3 crashes when I add a mew clip. Diagnostic details shows 50 threads. Is that a program limit?
That might be the issue. WHich is why it is never wise to upgrade a working system. The OPTIMAL system setup for FCP 4.5 is Mac OS 10.3.9 and QT 6.5...although QT 7.1.6 works just fine. When you start upgrading things beyond that, you risk things not working right. What did an upgrade to QT 7.3 get you? Nothing really.
Unfortunately to get BACK to a working version of your system, you'd need to do an Archive and install of your OS...yes, time consuming....sorry.
BUT, you can upgrade to FCS2 and continue to work on those projects. They will convert just fine. I would suggest cloning your system drive first, so you have something to fall back on. ALthough the system isn't working so...you really don't have anything to lose.
Shane -
Firefiox updated and I've lost my AOL links and cannot open tabs by clicking on the X.
Note that the X is a close button and that the new tab button is styled as a plus (+) sign.
You can find the New Tab button showing as a '+' on the Tab bar.<br />
You can open the Customize window and drag the New Tab button that shows as a plus sign (+) from the Tab bar on another toolbar and it will become a regular toolbar New Tab button.<br />
If you can't find the New Tab button then click the "Restore Default Set" button in the Customize window.<br />
If you want the New Tab button at the far right end of the Tab bar then place a flexible space to the left of it.<br />
You can check for problems with the localstore.rdf file.
*http://kb.mozillazine.org/Corrupt_localstore.rdf
*https://support.mozilla.org/kb/Toolbar+keeps+resetting -
No sound when importing from a Sony HDR-HC7
Hello all together,
I bought a new Sony HDR-HC7, the camera is fantastic. There is only one thing perplexing me: When importing HD-Clips into iMovie HD 6.0.3 I cannot hear the sound that was recorded by the camera. When I play the clips, I can hear sound. What could this be?
With my old Sony TVR 33 (no HDV) I don't have this problem.
Did I forget any settings?
Thanks for advices,
StefanHi Stfan:
I guess I would try the easy things first.
Make certain that " Video Play Through Camera " is
not enabled in imovie Preferences. That is
because it sends all audio through the FireWire port
and mutes it on the computer.
ake certain your video is 16-bit audio (not 12-bit).
Once you have imported (and saved) the video into
imovie, close imovie. Then unplug all firewire
devices (camera included).
Relaunch imovie. Is the audio there now?
Sue
Hi Sue,
thank you for your advice. As I use the German version I am not quite sure, if "Video Play Through Camera" is in the third tab of the iMovie-Prefs the fourth checkbox overarm? This one's unenabled. Audio is 16-bit.
Audio was alwas there in the play-mode but not in the import-mode.
Stefan
MacPro 2,66 - 2 GB RAM/PB G4 1,5 15" Mac OS X (10.4.8) -
No sound when importing mpg file
I have used several camcorders as sources for video clips. All of the clips can be imported to my Premiere Pro CS4. The problem I am having is that the mpg files from one of the cameras, when importing the clip, the video comes through fine, but the sound does not come through at all.
Is the problem MPEG file using MPEG audio or Dolby audio format?
Cheers
Eddie
PremiereProPedia (
RSS feed)
- Over 300 frequently answered questions
- Over 250 free tutorials
- Maintained by editors like
you
Forum FAQ -
Distorted pictures when imported
Hi!
I have a JPEG that looks nice in the Finder and Preview. But when importing it into iPhoto i gets all green. Other imported photos from the same camera looks great when imported (all JPEGs).
Thanks for any help.
// PeterPeter:
Welcome to the Apple Discussions. Open it in Preview and in the Inspector window see what the color mode and profile are. Also try changing the profile with the Tools->Assign Profile menu option and select one of the RGB profiles different from when is in there now. Then do a Save As to a new file name. Import and see if that looks the same.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file. -
APS function GD80 when OC.Put it back in the next betas!Or realize Offset-VCore
Hello,
I am betabiostester from the German MSI Forum.
Mainboards:GD65/GD80
RAM: any Gskill Ripjaws 2000mhz( G Skill F3-16000CL9-2GBR )
OS: fresh XP32SP3 and Win7 64bit
PSU: Amacrox Free Style 80plus 750W,Enermax ....< not the problem
CPU: any I5-750
Graphic Cards: Geforce GTX260 and others
4x P55-GD80
Please put back APS(phases) function in new Betabioses !!
If its possible, put the CPU APS function@OC Enabled back in the next GD80-betas .
A7581IMS.154 ---> A7581IMS.155 and the other later betas changelog: "Set CPU APS function Disabled when system manual OC or OV(CPU voltage)" . <-for powerful 8+2 phases P55-GD80 its unnecessary and not efficient@IDLE . Or try "Set CPU APS function Disabled when C-states manual Disabled" . Thats a good choice to save MOSfets,Socket and CPU + efficiency for most IDLE PCs @ OC and undervolting users ( C-states enabled) .
Or realize an Offset Vcore for C1E,like Asus,Gigabyte !!
No more Advantage for the MSI server phases now !!!
greets and good luckWith BETA A7581IMS.166 = now proper function with all modules
Thx Support
BETA A7581IMS.166 :
http://msi-forum.de/index.php?page=Thread&threadID=91959&pageNo=4
But no APS(phases) function when OC
Maybe you are looking for
-
When i double click on Mac HD the view has changed and my user name is no longer listed on the left. How can I reset this?
-
Need to send a mail to group of users when sales order saved
Hi user requirement is send a mail to group of users when sales order is saved
-
How can I add new value in a list box in a screen
Hi All , In transaction CRMD_BUS2000120 (CRM Server), I need to add one value to the list box. Already 4 values are coming. How can I add 1 more value. any suggestion is very appreciated. Thanks & Regards, Shekar.
-
HT1338 can not download adobe photoshop elements 11&adobe premiere elements11 AD006784327
I bought Photoshop 11 from Apple Store online and an unable to acees or install. Followed your instructions but it failed to install.
-
Read data with spreadsheet in different formats
Hi all, I have to read these data table using the VI Read From Spreadsheet File of .dat file: 377.88 6.326826E+03 2.024894E+03 253.794 377.89 6.328341E+03 2.026409E+03 253.984 377.90 6.329855E+03 2.027923E+03 254.173 377.91 6.331370E+03 2.029438E+