Preview image aligns to right!

please help! (how dramatic) - my preview image aligns to the right, and I can't do nothing with it!
I have a single monitor, and the options for the second one is grayed out but says "secondary viewer - desktop". I don't know if that's the problem, or something else.
the viewer also set to "show one".
how can I revert it to be aligned to center?
please, any suggestions?

anyone?!
reinstalled aperture, but still aperture thinks I have another monitor / viewer, but won't let me change how it's used, as it grayed out.
is there a way to completely remove all aperture prefs. and reinstall cleaner? after last reinstall the welcome splash screen doesnt show, as I previously marked it not to show, meaning the re installation wasn't clean and there were leftover data. how can I clean up all the data regarding aperture?
anything?

Similar Messages

  • Image Align Not Working in Browser

    Ok, so i have text and i put some images in there and i set my image align to either left or right or however i need it and it looks fine in dreamweaver, but when i preview it in a browser it isn't right. Does anyone know why this could be? I'm prolly being dumb and just have a slight minor detail wrong so......feel free to slap me if needed....

    In code view, you have this at the top of your page:
    <%@LANGUAGE="JAVASCRIPT" CODEPAGE="65001"%>
    <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
    <html xmlns="http://www.w3.org/1999/xhtml">
    <head>
    Which should be this:
    <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
    <html xmlns="http://www.w3.org/1999/xhtml">
    <head>
    Remove the JavaScript tag.
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists
    http://alt-web.com/
    http://twitter.com/altweb
    http://alt-web.blogspot.com

  • Slideshow vertical hero image aligns left

    Using the slideshow widget with a vertical image sometimes results in the hero image randomly aligning to the left instead of centered. All the hero images are positioned in the center of the content area. The slideshow frame is the full width of the content area so that each image slides in from right to left (due to the Horizontal setting for Transition). The Y coordinate is 10 for the slideshow content (and the hero image container). Horizontal images have not shown a shift to the left. Not all vertical images exibit the behaviour (one slideshow with 20 images, 5 of them vertical, had 4 which shifted left, one displayed properly centered).
    I have only seen this on my Phone layout, not on the Tablet or Desktop layouts. The problem shows when in Preview mode, Preview Page in Browser and on an iPhone 4s.
    NOTE: After further troubleshooting I found something that seems to resolve the issue. If I move the Y coordinate of the image to 11 (slideshow content is at Y: 10) the image stops shifting to the far left and aligns properly to the center. It doesn't make sense, since other horizontal images are set at Y: 10 and even a few pixels taller but have not exibited the problem.

    I noticed when I add a drop shadow to the hero image in the slide show, the hero image when viewed in browser or preview, then aligns left, when I remove the drop shadow from the hero image, then the content is properly aligned.

  • When previewing images by clicking on the thumbnail in an Event for example, I've been finding that many images preview in a 'zoomed in' way so only a small part of the photos is previewed in a highly magnified view.

    When previewing images by clicking on the thumbnail in an Event for example, I've been finding that many images preview in a 'zoomed in' way so only a small part of the photos is previewed in a highly magnified view.
    Initially I could find no cause. Then I tried right click - Edit and on the affected images, always get this warning:
    "Image Cannot Be Edited - This photo was previously edited with another application or with an early version of Iphoto. Duplicate this photo to edit it." and a "Duplicate To Edit" Button is displayed. 
    The external Editor defined for iPhoto is Adobe Photoshop Elements.
    Now, I reckon the MUST be others out there affected by this same apparent Preview bug, yet my searches have not revealed any answers.  Also seems impossible to find a contact number for adobe???
    Thanks

    Start '''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Firefox in Safe Mode]''' {web Link} by holding down the '''<Shift ''(Mac Options)'' >''' key, and then starting Firefox. Is the problem still there?

  • Previewing images in forms 11g from the server

    Hi All,
    i need your help in this issue please
    i've just migrated my application from forms 6i to forms 11g
    there is a function in my application that i used that previewed images that exists on a network drive that are used in an image gallary
    now i don't have this setup as the application is hosted on the weblogic server
    i want an alternative method that i can use to preview the images from the server
    the old way was:
    read_image_file('.\default_image.jpg','any','preview.image_preview'); --this shows a default image if no image was selected
    if :search_results.file_path is not null then     
         read_image_file(:preview.image_path||'\'||:search_results.file_path,'any','preview.image_preview');     -- this shows the image that we retreived it's name from the database but it exists on the file system
    end if;
    i've configured the webutil but i don't know what method to use
    also another functionality that i lost in the migration is opening a browser window to preview the final article that the editor entered using my application
    the old way was:
    declare
         url varchar2(1000);
    begin     
         url:='http://10.100.100.197:55/allcontent/allcontentimages/'||:SEARCH_RESULTS.FILE_PATH||'';
    WIN_API_SHELL.WinExec('"C:\Program Files\Internet Explorer\IEXPLORE.EXE" '||url||'',
    WIN_API.SW_SHOWMAXIMIZED,TRUE);
    Exception when NO_DATA_FOUND then
    MESSAGE('CAN NOT FIND THE FILE');
    end;
    now ithe WIN_API_SHELL is not working as i'm on the server side and i don't know the alternative
    please advice

    Hello Nivin
    If you want to read an file from local drive or from netwrok drive then before reading images please make sure that do you have full rights and have you mapped that network drive .
    after that you use read_image_file built in(). secondly you configure WEBUTIL package.
    please visit the following link for configuring webutil.
    I configured my webutil package from this link and its worked fine.
    http://www.baigzeeshan.com/2010/01/open-file-dailog-box-example-using.html
    thanks
    G.Yassen

  • In PSE 13, when I open a folder, jpeg files have a preview image, but PSD, DNG and CR2 files don't. Also, no thumbnail below the file list.

    Working in PSE 13, when I open a folder, jpeg files have a preview image, but psd files just have white sheet of paper as preview.  I have to open the file to be able to see it.  Also, there is no thumbnail of the file below the file list.Surely, there's a setting that needs to be changed. I did not have this problem with Elements 12. This is a real bother because I have to use Lightroom to see all the file types. It seems as if Elements is using the standard Windows file loader that can't show previews of file types it doesn't know including .PSD, DNG and CR2. Is that a bug or did I do something wrong? Thanks for any help.

    I am using Windows 7 64 bits. Working in the editor, I never use the organizer. The screen above is not the same at all that I got in Elements 12, it was completely different and showed me a thumbnail below the listing when I single clicked on one of the files. In Elements 12, I also could see  a thumbnail of all the file types, not only the jpegs. It is as if the loader is the regular Windows used anywhere, not the right one for Elements. I hope someone understands my problem.. Thanks.
    Mike

  • New Preview (image) update - not user friendly .

    New Preview software.
    Apple's new update to Preview is annoying  -  very annoying.
    a.  In the 'File options' it says "Save a Version".  Now that sounds like "Save a New Version", so it never does what I want.  Why not call it "Save", like it always was?   However, "Save a New Version" is what I really want  -  see below.
    b.  The new update of Preview can no longer change the file size, when you do a "Save", and neither can you place the file in another folder.  So to alter a fils size, you have to "Duplicate" the image, and then rename it back to the old name, and then save it again, writing over the old version  -  just to change the file size.  Why?
    c.  And when you save an image to jpeg, Preview no longer says how big the file size will be (the old version did).  So you have to guess a jpeg compression. Why?
    d.  And Preview will not say how many pixels are in the image either (see below). Why?
    One of the biggest tasks I have is getting images to the right size  - as a balance between customer quality and the total file size of the pdf or epub file  (Amazon have a limit of 50 mb on epub books).  This task is crucial, and yet I can no longer use Preview to do it, because it takes too long  -  duplicating images and resaving them, and then not even knowing how big the exported file will be.
    I now have to use Photoshop, which takes much longer than the old version of Preview, but is a darn sight quicker than the new version of Preview.  With Photoshop it still overwrites the old file instead of having to duplicate and rename (most of the time) and it says how big the output file will be  (so you can alter the jpeg compression until you reach the file size you want - before you save the new file). 
    Likewise, Photoshop allows adjustments to the pixel numbers, and Preview does not.  Apple iBooks has a 2 million pixel image limit for its epub files.  But then Apple provides an image software package that will not say how many pixels are in the image.  Are Apple departments talking to each other?
    Some of these complaints, about the complexity of saving of files, also applies to Pages software.  Again the options are simply "Save" ,  "Duplicate" or "Export".  But I don't want that.  What I want is "Save New Version", which then gives the option of changing the file type, the file size, and of placing the new (almost duplicated) file in a new folder. 
    Again, the trouble with the "Duplicate" option is that is renames the file as "untitled-8.pages", which I now have to rename back to what it was before, and then save to a new folder.  And you often get a load of "untitled.pages" files hanging around the place, which you don't know if you have saved or not.
    And why cannot I use Appleworks?   It was ten times better than Pages.

    Totally agreed, I downloaded the new version and it was a frustration. After hours wrestling with this new i-stunned version i haven't been able to add 1 gb video clip (mp4) to my Ipad 2! My patience runs out and i give up. Now I switch to android phablet note ii it so easy to use with many nice features and specifications. Importantly, it have saved me a lot of precious time and i have a lot fun with it!

  • CS3 Bridge: Preview image too small

    Hi,
    Here's what I'm using:
    Photoshop CS3: 10.0.1
    Bridge: 2.1.1.9
    ACR: 4.6.0.30
    No matter what mode I coose (lightbox, horizontal/vertical filmstrip ...), the preview image occupies a very small part of the preview pane and I find no way to resize it. The thumnail pane and the thumbnail images themselves are resizable all right.
    I tried purging the cache and that didn't help.
    Any help would be very much appreciated.
    Thanks,
    Prabal.

    Hi,
    I wanted to report another experiment that possibly points out where the problem is.
    Case 1:
    I placed the preview and content panes one above the other. Like so (preview pane at the top):
    Then I started pulling the horizontal separator between the two panes to shrink the size of the lower pane and this caused the preview image to starting to get bigger to fit the preview pane real estate space. Look at the image below (and note that the bigger image is not rendered correctly) and note that at the time of taking the screenshot, I did not yet release the horizontal separator:
    Finally, just as I released the horizontal separator bar, the image in the preview pane got resized to its initial small size:
    Any clue?
    Thanks,
    Prabal.

  • Aperture 3: low quality preview images

    I don’t know if it's just a problem with my (new) Aperture Trial library or if it's a Aperture 3 bug:
    The preview images Aperture 3 (trial) creates from raw files (in my case NEFs) are different from the JPEGs exported using the same JPEG settings.
    I get the impression that the preview images don’t use all the adjustments applied to the raw files. They don’t have the moire reduction applied. The preview images of high ISO images have color noise, the exported images don’t have that color noise (the moire and noise settings of raw fine tuning are applied to the exported files but not to the image previews).
    As the preview images are used for the Finder media browser, iLife, iPhone/iPod touch picture sync and other things the lower quality is not acceptable for me.
    The preview images of Aperture 2 are identical to the exported JPEGs from Aperture 2 (using the same settings).
    I use Aperture 3 Trial with a new trial library and a few hundred raw images just to test Aperture 3.
    I already erased all preview images and rebuild the previews. I deselected using the embedded JPEGs from the raw files and I let Aperture rebuild the miniatures.

    It seems that Ap2 syncs the previews to the iPhone... you have to clear the previous cached previews before it will load higher quality previews... anyhow, here is what I did... and photos look better on my iphone (not feeling motivated enough to verify if it is the same quality as iphoto sync)...
    1.) change Ap2 prefs for "limit preview size" to "don't limit"...
    2.) select all the photos in the album(s) you are want to sync, right click (ctrl click), and select delete previews...
    3.) sync your iphone again...
    if that doesn't work directly, you might need to uncheck sync photos to delete all photos on the iphone, but the ultimate goal is to ensure refresh with the higher quality previews...
    Hope that makes sense or gets folks in the right direction... Apple really needs to put a check box in future version of itunes to sync full quality or something...

  • Setting Preview Image for iMovie

    I just created several tutorial videos using iMovie. The videos are embedded in an online course I'm developing. Does anyone know how to set the preview image that appears for the video?
    Right now, the preview image (i.e. the image that appeard under the "play icon" for the video before the video is clicked on) is just a black image. I believe the player that I'm using defaults to the first frame of the video, which is a black screen. Is there a way to change this? Our tech folks said the preview image is a setting within the video, not the player.
    Thanks for your help.

    Have a look at this tutorial: http://web.archive.org/web/20081012122149/http://www.monkeyflash.com/flash/poster_frame_fo r_flash_video/
    If you still have questions, ask again.

  • Preview images?

    hey guys, well i have a folder with alot of photos and i dont remember what every picture is which by it filename, is there anyway to make so i will see thumbnails of all the photos in the folder? so like i go into the folder with a bunch of pictures and there will be a little preview image for every photo file so i know which image it is without opening it
    thx alot indeed

    Before I share the app I use I have something to say.
    You have lousy forum etiquette. You constantly post asking things you could easily do research for yourself, both here in the Apple Discussion forums and on the web. You rarely show any appreciation for the help people give to you by marking their posts as Helpful or Solved. In fact you rarely even return and mark your original posts as Answered, you just ignore them and move on to post another question. You obviously don't read the links people provide because you ask another question that has usually been answered in the link.
    You received a printed User Guide with your Mac and there is a Help utility in the Finder, as well as many OS X and 3rd party apps, in the Help Menu, that answers many of the questions you post. There is a Google search box in the upper right corner of every Safari window that has a toolbar, I, and I'm sure others here who assist you, often find the answers in barely a minute by typing the topic in that search box and pressing enter.
    Most of the apps you ask about are available at Version Tracker. It also has a search box. Plus the apps are arranged in topics, as well as the newest postings.
    Please go back and mark all your previous posts that are answered, as well as, show some appreciation to the folks who helped you with answers and suggestions.
    I use ThumbsUp. It is free, a Universal binary and available on Version Tracker. Go to the Preferences/Create and choose the Icons for Originals. Then you can highlight groups of photos and just drag & drop them on the ThumbsUp Icon in your Apps folder and it will open and start creating a Photo Icon for each photo. Small groups are almost instant. I have done as many as 150 in one drag & drop.

  • Can I force Photoshop CC to regenerate preview images?

    I have a photoshop file that seems to have corrupted preview images.  When I look at the file in bridge I only see a photoshop icon.  I have tried the following solutions, all unsuccessfully:
        clearing the bridge thumbnail cache
         saving the file as a copy in photoshop.
         restarting my system
    Photoshop CC 64, Bridge CC 64, Windows 7 64bit
    Preferences->File Saving Options-> Image Previews is Always Save
    Any other suggestions?

    This doesn't seem to solve the problem as the new file also does not show a preview image.
    Puzzling indeed!
    I did notice, however, that most metadata also appeared to be gone (bridge reported no color profile,
    or pixel dimensions for example).  This suggested an alternative approach.  I opened the original .dng
    file again and then copied the layers from the damaged .psd per this suggestion.  When saved, there was
    a preview!  However, it was only a preview of the base conversion.  No matter what layers are visible when
    the file is saved, the preview doesn't change.  Still not right.  I hesitate to continue to work with an obviously
    corrupted file.

  • Is it possible to preview images in the files panel?

    sorry in advance for what probably is a dumb question with a
    simple solution.
    i realize i can preview images in the assets panel-- but is
    it possible to preview image files while in the files panel
    instead?
    i have a lot of images organized within folders in the files
    panel-- so it's easier there to locate and visulalize an image--
    than scrolling down the long list in the assets panel.
    thanks.

    Hello,
    I don't believe there is a way to view images in the files
    panel.
    However, there's a quick way to see them if you're using
    Windows.
    Select your image folder in the Files Panel.
    Right click and choose "Explore".
    It opens a window where you can see all the images in that
    folder.
    It's much faster than scrolling through the assets, clicking
    the file names
    and reading the paths to know where they are.
    This is very handy whether you have image folders in
    different directories
    (for organization and cleaner img src paths in the pages
    within the
    directory) or if you just dump them all in a folder in the
    root.
    On my wishlist: Hover over the image name in the files panel
    and a small
    box, like a tool tip, displays the image.
    Maybe someday.
    Take care,
    Tim
    "dexter manika" <[email protected]> wrote in
    message
    news:go4to8$k1m$[email protected]..
    > sorry in advance for what probably is a dumb question
    with a simple
    > solution.
    >
    > i realize i can view images in the assets panel-- but is
    it possible to
    > view
    > image files while in the files panel instead?
    >
    > i have a lot of images organized within folders in the
    files panel-- so
    > it's
    > easier there to locate and visulalize an image-- than
    scrolling down the
    > long
    > list in the assets panel.
    >
    > thanks.
    >

  • No Safari Bookmarks Preview Images

    Hi,
    some of my Safari Bookmarks in Cover Flow Modus don't show a preview image.
    They just seem to get lost from time to time. And I always had this problem. With every OS and Safari, no matter which version.
    How can I assure to always have preview images of my bookmarks or trigger that they'll come back?
    Thanks,
    Melros

    Ok, interesting to hear. Thank you.
    But it never felt like Safari would do it automatically. And beside, why should the cache be "full" by sometime? There's enough space on the drive.
    But here's a solution I just found out for now:
    After deleting the cache (and I guess it would also work for single sites without an recent preview image) I just opened the page again and let it fully load. Then the preview image is back again.
    So I did it with all my folders now and it seems to work again. But sadly again not for all. There are still some with no preview images in between where even reoping the page doesn't help.
    Quick tip for user who are trying this method: You can simply right click on a bookmark folder and open all bookmarks in tabs. So you won't have to open every single one.
    Future solution idea for Apple:
    I wish Apple would take care about it automatically. (if they already do we see that it doesn'r properly work yet). So that the images just won't get lost in the first place or at least offer a kind of "refresh all bookmark previews".
    From now I'll keep an eye on when they get lost again and will get back on this post if I find out something new about it.
    So thank you Carolyn for you help here! : )

  • Will building the preview images kill Aperture performance?

    So Aperture 1.5 will have the option to continually generate JPG preview images. This is how it gets the new "drag and drop iPhoto like ability" because when you do a drag out of Aperture to another app or desktop you are merely copying a file and not rendering a JPG file on the fly...
    I cannot imagine what this will do to performance to have preview images being constantly generated in the background.. Everytime you make an adjustment to a version, the machine will be taxed with generating a JPG based on your preferences, almost like doing an export after each adjustment..
    I am basing this on how much work it takes Aperture 1.1.2 to export images...

    Preview-building won't get in your way, as it is designed to happen in the background, only when you are not directly interacting with the application. The moment your actions require CPU cycles, automatic preview-creation is temporarily paused and then restarts again when you're not working on images.
    In addition, you have control over when and how previews are made. You can turn off automatic preview creation and then generate the previews on demand for only specific projects, or only for selected images. (For example, create previews only for your selects, not for the alternates or rejects in stacks).
    If you need previews of certain images immediately, you can choose a command to generate the previews; this action becomes a high-priority request and is moved to the front of the queue so that the previews are made right away.
    Joe Schorr
    Sr. Product Manager, Aperture
    Apple

Maybe you are looking for