Preview in browser vs preview mode in app?

I'm on Muse CC 2014. In my Design window and Preview window, theres a youtube widget on my site in thats in a set location. However when i preview in browser it shows up a number of pixels below where it should be. any thoughts?w

I should add that this is a plain vanilla HTML site, so I wouldn't think that any scripting language issues would be present.

Similar Messages

  • Preview in browser IE7 - It asks to open or save file..why?

    Whenever I use the preview in browser option with Dreamweaver
    CS3 and Vista's IE7 as default I get an open or save file prompt.
    How do I stop this from occuring so that my webpage will
    display within IE7 and I don't get this prompt each time?
    Many thanks for your help.

    Wouldn't matter in this case. There is something wrong at the
    system level
    for the browser not to recognize the file's extension.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "Michael" <[email protected]> wrote in message
    news:g0gaqd$qln$[email protected]..
    > Try Edit>>Preferences>>Preview in
    Browser>>Check Preview using temporary
    > file
    >
    > Michael
    >
    >
    > "Spa8nky" <[email protected]> wrote in
    message
    > news:g0fl6o$681$[email protected]..
    >> Whenever I use the preview in browser option with
    Dreamweaver CS3 and
    >> Vista's
    >> IE7 as default I get an open or save file prompt.
    >>
    >> How do I stop this from occuring so that my webpage
    will display within
    >> IE7
    >> and I don't get this prompt each time?
    >>
    >> Many thanks for your help.
    >>
    >

  • Why does f12(preview in browser mode) not render the page correctly?

    Why does f12(preview in browser mode) not render the page correctly? Instead when i go to the main or original file, it renders properly? It is drriving me nuts! HAHA! Can anyone help? mainly CSS problem, div overlapping but when viewing from original file on browser not through F12, it renders correctly. CS5.5 DW. Thanks!

    just that one of it is a f12 (preview in browser) while the other one is going to the directory and clicking the html page by itself.
    F12 is simply a hot key that launches your browser.
    The only thing I can think of to explain this is that you have a local site folder someplace in addition to a testing server site.
    When you hit preview, your testing server on the localhost/ is being called up in the browser.
    When you open the HTML page directly, you're seeing the local site file with unparsed data.
    Try disabling your Testing Server in Sites > Manage sites > Edit...
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists 
    http://alt-web.com/
    http://twitter.com/altweb
    http://alt-web.blogspot.com/

  • 'Space after' style not applying to text in 'preview in browser' (chrome) or export modes.

    Hi all,
    I seem to run into this issue everytime I have two paragraph style applied within one text container.
    If I include a heading and apply a paragraph style which includes 'space after' and then some text below with another style it does not appear in either 'preview in browser' (Chrome) or in the exported html. The text appears butted up against each other. Please keep in mind there are no other paragraph or character styles applied to this container.
    It works if I 'unlink style from selection'.
    However this is extremely frustrating when you have a text heavy site with multiple paragraph styles - it effectively renders paragraph styles useless and generates excessive CSS code and a very time-consuming process if I need to go back and alter the paragraph styles.
    Does anyone else experience this issue? Can anyone shed some light on this?
    I need to get this site through to my client ASAP and would rather have a professional CSS file rather than one full of work-arounds.
    Adobe, please respond ASAP.
    Kind regards,
    Adam

    For two separate paragraph styles to work in one text container in muse,
    you need to use a hard return.
    You would use Character Styles if you want to use two specific styles inside one text container
    with just a "en space" between the text.
    This is based on using Muse generated CSS and not going into the CSS files after Muse generated the code and altering to modify the look.
    See attached file:

  • Preview in browser option not working

    Hi there,
    I'm running dreamweaver cs4 on mac osx 10.4.11.  I'm trying to use the 'preview in browser' option without any success.
    When I try to preview in Firefox, or any other browser in fact, I get the message 'Unable to launch Firefox.app - Please be
    sure that this application exists and that there is enough memory to run it'.  I know for sure I have firefox installed as
    I use it all the time.  I have also set Firefox as the primary browser within Dreamweaver.
    Any ideas?
    Thanks
    Simon

    Not sure if there's anything in this technote that may help:
    http://kb.adobe.com/selfservice/viewContent.do?externalId=d9e959b3

  • When snapping a rectangle to the top of the page left space between rectangle disappears in the preview (not in the design mode)

    I think the image looks more descriptive than my words actually.. When I move the first rectangle to the top of the page the gradient background disappear in the preview (on the right side of the screen), even though I still can see that in my Design Mode (left handside). Everytime the top rectangle snaps to the top of the page the second rectangle snaps to the first one in the preview (both muse preview and browser preview)...Any help?

    Seems you have applied scroll on second rectangle with key position setup on top of the page edge as a result when page edge is reached the second rectangle scrolls up on the page.
    If this is not the case then please provide more details.
    Thanks,
    Sanjit

  • Without changing anything: Live view looks fine, but "preview in browser" does not

    I haven't made any changes to our website in months. When I opened my index page, I did not change anything yet, but did a "preview in browser" and my whole slideshow is missing! It's still fine on the live website, as I haven't uploaded anything. Help.... why is it doing this? I need to add a small icon to our homepage, but I don't want to upload this page if it's not going to work!
    www.epaaudio.com

    On your page, these links are ALL root relative -
    <script language="JavaScript">
    // Advanced Random Images Start
    // Copyright 2001-2006 All rights reserved, by Paul Davis - www.kaosweaver.com
      var j,d="",l="",m="",p="",q="",z="",KW_ARI= new Array()
    // KW_rs[5000]
      KW_ARI[KW_ARI.length]='/Gallery_images/slideshow/auditorium.jpg';
      KW_ARI[KW_ARI.length]='/Gallery_images/slideshow/arena.jpg';
      KW_ARI[KW_ARI.length]='/Gallery_images/slideshow/classroom.jpg';
      KW_ARI[KW_ARI.length]='/Gallery_images/slideshow/conference.jpg';
      KW_ARI[KW_ARI.length]='/Gallery_images/slideshow/conference2.jpg';
      KW_ARI[KW_ARI.length]='/Gallery_images/slideshow/courtrm.jpg';
      j=parseInt(Math.random()*KW_ARI.length);
      j=(isNaN(j))?0:j;
        document.write("<img name='randomSlideShow' src='"+KW_ARI[j]+"'>");
    function rndSlideShow(t,l) { // Random Slideshow by Kaosweaver
      x=document.randomSlideShow; j=l; while (l==j) {
        j=parseInt(Math.random()*KW_ARI.length); j=(isNaN(j))?0:j; }
      x.src=KW_ARI[j]; setTimeout("rndSlideShow("+t+","+j+")",t);
    rndSlideShow(5000,0)
    // Advanced Random Images End
    And, being embedded in JavaScript, they will not be found to be 'adjusted' by DW, even when using temporary files to preview.  I'm afraid you will have to just lump the fact that they are not displaying in preview mode.

  • Captivate files not displaying well in LMS - Preview in Browser works fine.

    I have an issue with a module once I publish it and load into our LMS.  During preview and preview in browser it looks fine. Once it is published in the LMS, things start displaying weird.  This is a software demonstration module.
    This is an example of the weirdness that happens after being published.
    This is what it looks like in Preview in browser before I publish it.

    iPhoto is fully updated.
    I do not have Aperture installed.
    I also use a Canon 400D dslr. I have no problem viewing Canon's RAW files' previews in Cover flow mode.
    But my NEF files from Nikon are the ones that appear in low resolution. Canon RAW files appear perfect.

  • My browser (and preview) doesn't show images in Muse...

    My browser (and preview) is not able to show images hosted on my local server, however when I access those HTML files directly it works; It seems that something is blocking HTTP traffic from my Mac. Please help me find the root cause. Thank you! I am wasting hours on this.

    I've been looking online and others seem to have similar issues but i haven't found any solutions.
    Here's a few screen shots to show others the problem.
    Design Mode:
    Preview Mode (same results from Preview in Browser):
    Published to Test Site:
    If i refresh it a few times in preview I will get bits and pieces of the image to come through.

  • Error when previewing in Browser

    I am using Captivate 8. My projects work as they should, but when I try to Preview in Browser, for some reason Captivate is triggering Microsoft Word to open. I am totally stumped on this and could really use some input.

    Check the file associations on your computer. It sounds like you may have MS Word set up as the default app to open HTM files.

  • CS3 author 'preview in browser'

    My company recently upgrade all authors to Contribute CS3,
    from Contribute 3. In the previous version I, as system admin, gave
    everyone a new ccmenus.xml file that allowed authors (i.e. roles
    without Publishing permissions) to use F12 to 'Preview in browser'.
    However, now that we have CS3 (i.e. v4.1), this no longer works.
    I need my authors to be able to preview their work BEFORE
    they send for review, especially as the templates I created for
    them to use rely heavily on scripted sections, meaning that what
    they see in 'edit mode' is nothing like the end result once
    published.
    How can I re-enable the F12 functionality for authors?

    I found the ccmenus.xml file in C:\Program Files\Adobe\Adobe
    Contribute CS3\Configuration\Menus\.
    This is the xml:
    <menuitem name="P_review in Browser" platform="win"
    key="F12" enabled="dw.getDocumentDOM() &&
    dw.doesWorkflowAllowPublish() &&
    CCWorkspaceManager.getManager(dw.getDocumentDOM()) &&
    CCWorkspaceManager.getManager(dw.getDocumentDOM()).canProcessEvent('browserPreview')"
    command="CCWorkspaceManager.getManager(dw.getDocumentDOM()).processEvent('browserPreview' )"
    id="DWMenu_File_BrowserPreview"/>
    Maybe you can change this to:
    <menuitem name="P_review in Browser" platform="win"
    key="F12" enabled="dw.getDocumentDOM() &&
    CCWorkspaceManager.getManager(dw.getDocumentDOM()) &&
    CCWorkspaceManager.getManager(dw.getDocumentDOM()).canProcessEvent('browserPreview')"
    command="CCWorkspaceManager.getManager(dw.getDocumentDOM()).processEvent('browserPreview' )"
    id="DWMenu_File_BrowserPreview"/>
    I tested this as a writer and I can preview the page in the
    browser pressing F12 or going to File, Preview in browser.

  • Photos preview and browsing without importing

    Is it possible to preview or browse the photos without importing all the phots into the Mac? Sometimes I just want to preview the photos and select the best ones to import into the Mac for further editting and delete the rest of them. But now I must import all of them ino Mac before I preview them in slideshow. It is not that convenient for me. Any good suggestions from you guys?

    RatVega, thanks for your help. It helps me a lot. Other than that solution, one of my friend recommends me another APP, named "ArcSoft Photo+". I tried it, and it works well. Just would like to share with you and anyone who has the same problem. https://itunes.apple.com/us/app/arcsoft-photo+/id628703558?mt=12

  • Add IE7 to Preview in Browser on Mac?

    Can I add IE7 as one of my "Preview in Browser" options if I
    am using Dreamweaver CS3 on a Mac? If so, where can I find the
    .app?

    I think the last version of IE for Mac was IE5. Unless you
    can run Windows on your Mac, you'll need to preview IE7 on a
    PC.

  • Adobe Muse: "Preview page in browser" and "preview site in browser" functions have stopped working.

    Working one day then not the next. Firefox just spins. The preview button works, as does the publish function.
    2.7Ghz i7 Macbook Pro with Retina Display
    Muse 2014.0.1
    Something else to add: When Firefox finally timed out it displayed the full url. Copying and pasting that into Safari and everything works. So it seems in someway this is a Firefox issue or a Muse -Firefox connection issue.
    So the new question is: how can I change the browser Muse chooses to use when I select these two functions?

    HI,
    Adobe Muse will use OS default browser for preview the page/site in browser. So you can change the default browser and preview the site again.
    Also, try to troubleshoot Firefox, using their official documentation
    Firefox can't load websites but other browsers can | Firefox Help
    Do let me know if you have any question.

  • Preview In Browser Not Working With Safari 3.0 On Mac

    When using the "Preview in Browser" command from DW CS3, the
    file address information is incorrect when previewed in Safari 3.0.
    I don't recall this being a problem before I updated my Mac to
    Tiger. Anyone else had any problems with this?
    Thanks,
    cloud9indusrties

    If the address information is incorrect you should double
    check your paths. Also, consider using the computer's IP address if
    you can as opposed to the localhost address. All you would need to
    make that work is to just turn on Web Sharing in the preferences
    (this turns on Apache web server). I have found this to be a much
    more reliable method on the Mac.
    Also, please make sure, if you have not already done so, that
    Safari is the latest version (meaning the final release and not the
    beta), because there were issues with the beta that I had.

Maybe you are looking for

  • Note type not visible in Creation of Service Request

    Hi there! I am experiencing this OAF issue: When creating a new Service Request there is a section "Problem Description" where we can see DFF, Summary and Notes. The Notes region I can see is extended from another Region where there is the Notes Type

  • Rotating placed image FAIL - Has anyone had this problem

    I placed an image and made 2 columns. The placed art in the 2nd column has been rotated 180 degrees. The problem is everytime I reopen the document, the placed art in the second column has been reset to right side up again. this is the first time ive

  • AP 11i : Is it possible to setup a workflow for price or qty holds

    Hello, I would like to know if someone has already setup a workflow in order to manage in the workflow the qty / price hold ? For invoices manually entered. My scenario would be the following : - Match an invoice to a PO, with differences on price or

  • Is there a way to sort subscriber list by Surname?

    Is there a way to sort subscriber list by Surname? Currenty it is sorted by Full name, sorting by first name alphabetically.I would prefer it to sort by surname.

  • Usage Tracking Dashbiard Name

    Hi All, We have configured Usage Tracking but when we look at results, Dashboard Name is showing like "/shared/Financials/_portal/Test Dashboard" actually our dashboard name is Test Dashboard. How can we get that Dashboard name in results? Thanks in