Preview in device central not working

Running Dreamweaver CS5 on mac and when designing the site and i click preview in device central, nothing happens, nothing loads up, it's like it just doesn't work

I just looked in the libary folder for device central and found that there isn't anything listed in there, i'm gonna do a re-install
okay i uninstalled dreamweaver and installed it again and it still doesn't work

Similar Messages

Device central not working

When I click Device central, the program starts but then this error message appears:
"Licensing for this product has stopped working." I'm running CS3 Photoshop Standard on windows Vista. The copy of the software is original, it's not installed on any other computers.
I tried reinstalling Photoshop but that did not solve it.
I don't know if it's related but i can't get "Save for Web & Devices" to work. The error message on that is "Could not complete the Export command becuase of a program error."
I hate it when software doesn't run as it should.
Thanks for your help.

Hi there,
I have the same Error, Adobe Device Central CS3 is giving error-Licensing for this product has stopped working. You cannot use this product. you must repair the problem by uninstalling this product or contatct you IT administrator.
All other CS3 products are working fine and only this one is playing up. I have tried reinstalling the whole suite. Tried the steps mentioned in KB401528
any solution to the issue is appreciated.
regards
Raj

I am creating webpages with frontpage and trying to make collapsible lists. The lists collapse and work correctly in "preview" mode, but do not work when accessed through firefox or explorer 8. Does anyone know what I am doing wrong?

I am creating webpages with frontpage and trying to make collapsible lists. The lists collapse and work correctly in "preview" mode, but do not work when accessed through firefox or explorer 8. Does anyone know what I am doing wrong?

Welcome to the 'wonderful' world of HTML5 e-learning.
In my view, from the issues I am seeing everywhere, HTML5 output from rapid e-learning tools such as Captivate is not ready for the kind of mobile device e-learning you want to develop.
Sorry to be pessimistic, but you may need to consider going back to the drawing board and coding it from the ground up.

HT201413 Device does not work when I connect it to your computer to the iTunes program update requests and then gives me an error No. 21

Device does not work when I connect it to your computer to the iTunes program update requests and then gives me an error No. 21

Device does not work when I connect it to my computer to the iTunes program update requests and then gives me an error No. 21

TS4036 icloud backup to new device is not working as says I dont have enough storage, even although the backup is only 3GB out of my 5GB (giving more than 1GB available!)???

back up from icloud to new device is not working as it is saying that I dont have enough storage, when I am only trying to use 3GB out of my 5GB allowance???

I may misunderstand your post - you "backup TO icloud" or restore from icloud to a new device. Not sure which of these you mean.
If backing up TO icloud, the problem may be that there's not enough storage on your device, not icloud, as a device needs a good bit of storage to create the backup.
If restoring from icloud to a new device and you get the error, the storage referenced must be that on the device, although that doesn't seem possible, since a device has more memory than 5GB.

When I connect my ipod touch tomy computer it says that the device will not work because the Apple mobile device hasnt been activated?

Why does a meesage pop up when I connect my iPod touch saying that the device will not work because the Apple mobile device hasn't been activated?

Refer to this article to restart AMDS:
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/TS1567

Windows reports that the "USB-IF xHCI USB Host Controller" device is not working properly.

I have been receiving the following error and instructions to fix it for a long time now, prior to updating to Windows 8.1:
A device is not working properly
Windows reports that the "USB-IF xHCI USB Host Controller" device is not working properly.
Recommended solution to the problemUse Windows Update to check whether new device drivers are available. Proceed as follows:
Open Device Manager
Search in the device manager for the device whose driver you would like to update and double-click on the device name. You may first have to enable the "Show hidden devices" entry in the "View" menu.
Switch to the Driver tab, click Update driver and follow the instructions
When I follow the instructions and try to update the driver, I am told "The best driver software for your device is already installed."
How do I update the driver to stop receiving the error?
This question was solved.
View Solution.

I have solved the initial problem.
I found the solution on the Forum at http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03926756&tmp_task=solveCategory&cc=us&dlc=en&la...

In the middel of updateing my IPod the connectione stopd and since then the device is not working. only white screen no connectivity to win or to the Appstore

In the middel of updateing my IPod the connectione stopd and since then the device is not working. only white screen no connectivity to win or to the Appstore

Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

Preview and Mac Mail not working after upgraded to 10.4.11

Hello,
I just upgraded to 10.4 everything works fine, after I upgraded to 10.4.11, I find funny noice on my hard drive and preview, mac mail is not working. Trashing the preference is not working.
Urgent help please.
Thank you
Benny

There are no guarantees, but following this procedure when installing updates and upgrades on your Mac, or even re-installing them, will go a long way towards avoiding unpleasant after effects and ‘post-update stress disorder’.
It is also worth noting that it is an extreme rarity for updates to cause upsets to your system, as they have all been extensively beta-tested, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
So before you do anything else:
If you can, make a full backup first.
Turn off sleep mode for both screen and hard disk.
Disconnect all peripherals except your keyboard and mouse.
1. Repair Permissions (in Disk Utility)
2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
3. Download the correct version of the COMBO update from the Apple download site. If your car runs on gasoline you would not want to fill the tank with diesel, so don’t try to install the PPC updater on an Intel Mac!
The 10.4.11 Combo Updater for PPC Macs is here: http://support.apple.com/downloads/MacOS_X_10_4_11_Combo_Update__PPC
And for Intel Macs: http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx10411comboupdat eintel.html
If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
Full details about the 10.4.11 update here: http://support.apple.com/kb/TA24901?viewlocale=en_US
More information on using Software Updater here:
http://support.apple.com/kb/TA24901?viewlocale=en_US
Using the Combo updater ensures that all system files changed since the original 10.4.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.4.10 to 10.4.11. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
Now proceed as follows:
4. Close all applications.
5. Unplug all peripherals except your keyboard and mouse.
6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
8. Once your Mac is awake, repair permissions again, and you should be good to go!
If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious!
9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them compliant with the latest version of your operating system. Give them a weeks or two while you regularly check their websites for updates. This applies particularly to plug-ins for Safari 3.
N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
Lastly, Apple's own article on the subject of Software Update may also be useful reading:
http://docs.info.apple.com/article.html?artnum=106695
If you are updating Safari (or just have):
Input Managers from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If you have installed an OS update and Safari is crashing, the very first thing to do is clear out your InputManagers folders (both in your own Library and in the top-level /Library), log out and log back in, and try again.
So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari. Remember: Tiger up to 10.4.10 used Safari 2.0.4 or, if you downloaded it, Safari 3.0.3 beta. Safari 10.4.11 used Safari 3.0.4 which was not a beta. If Safari 3.1.2 on 10.4.11 is not the fastest browser you have ever used, then something is wrong!
Moreover, trying to revert to Safari 3.0.4 (or worse still, version 2) when running 10.4.11 or 10.5 can have repercussions, as Safari 3.1.1 uses a completely different webkit on which other applications like iChat, Mail and Dashboard Widgets etc also rely, and may entail you having to reinstall an earlier operating system.
Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party ad-on. Two such add-on that have been frequently mentioned here for causing such problems are Piclens and Pithhelmet. If you have them, trash them.
Additional tips on software installation here:
http://docs.info.apple.com/article.html?artnum=106692
To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
Again, the advice is to remove all Input Managers from the following directories:
• /Library/InputManagers
• ~/Library/InputManagers
especially prior to system updates (they can always be added back one-by-one later).

Audio device is not working, i have installed proper drivers, but audio device is not working

hi,
I have installed registery mechanic last week and made a system run in my laptop. After re starting my laptop, my audio devices are not working fine. I have installed the drives correctly and they are reflecting in program lists, how ever the audio device is not working. If I am reinstalled the system, My audio device is working fine, I have installed a fresh OS, but sitll its not working fine, could you help me to fix this one.

Tecra A8
Model No = PTA83L-04C02N
Can you please tell me from where I need driver so that my "Fn" key will be operation? Right now I tried to use "Fn" with F6 and F7 which suppose to change screen resolutions but nothing is happening.
Can you please tell me if I reinstall New OS (Windows XP - Sp2) then in which order which driver and Toshiba software I should install?
Hard to find XP drivers and utilities for that machine, Manoj. But you're in luck because the Asian part-number family PTA83L corresponds to the European PTA83E.
Go to the European download site and look up the Tecra A8 with Short Model No. PTA83E. You'll find 40 XP drivers, utilities, and BIOS updates.
Install the Chip Set Utility first, then the Display Driver, and then the other major drivers. Install the Common Module prior to Toshiba utilities and other programs.
Good luck!
-Jerry

My audio device is not working

hello
I don't know the reasone behind it but my audio device is not working but I rember accedentally i uninstail my IDT audio device.

Hello rasfunkey,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that you have uninstalled your audio drivers and require assistance. I would be happy to assist you, but first I would encourage you to post your product number for your computer. I am linking an HP Support document below that will show you how to find your product number. As well, if you could indicate which operating system you are using. And whether your operating system is 32-bit or 64-bit as with this and the product number I can provide you with accurate information.
How Do I Find My Model Number or Product Number?
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
Please re-post with the requested information and I would be happy to provide you with assistance. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Are mobile internet USB devices still not working on Snow Leopard?

Are mobile internet USB devices still not working on Snow Leopard? I actually had to go back to my previous operating system to get this to work. I would however prefer to use Snow Leopard...if Apple & HUAWEI have finally got their act together!

There appears to be a problem with drivers for USB wireless modems with 10.6. I upgraded from Leopard to Snow Leopard and now can't connect to the internet with my wireless modem. I hope Apple sort this out soon. Or maybe it's Huawei that needs to put a 10.6 driver into its software.

The apple mobile device is not working on the ipad. how can i fix it?

My apple mobile device is not working on my ipad and my itunes dosn't work now. How can I fix it?

Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

Satellite U400-17R - Sound device is not working after installing XP

Hi there,
I purchased a U400-17R Model with Vista Home. i Formatted it and installed Windows XP Professional downloading the XP drivers from Toshiba site.
Everything works but my Sound Device is not working. when i check in the Device Manager the Sound Drivers are there and it says working properly.
I am Lost...Can anyone please help?

Hi!
On Windows XP you have to install two patches from the Microsoft Knowledge Base for high definition audio cards. If you only have SP1 or SP2 you need the patches but if you have SP3 you dont need it because they are a part of SP3.
Both patches or SP3 must be installed *first* and then the sound driver. So if you have installed the sound driver first you must remove it and then install the patches again. After this it should work with the sound:
http://support.microsoft.com/kb/835221
http://support.microsoft.com/kb/888111
Bye

Bootcamp 3.2: Microsoft Virtual WiFi MiniPort Adapter shows "device is not working properly...Code 31"

Using Windows 7 Enterprise 64-bit, Microsoft Virtual WiFi Miniport Adapter shows the "device is not working properly because Windows cannot load the drivers required for this device. (Code 31).".The device is the Apple iMac10,1 All-in-one computer. Right clicking browse files (for the device) shows the Bootcamp (C:), DVD (D:); and my external hard drives can be selected.
Internet and WiFi connections all working ok. Am also running MacDrive 8 to access the Mac drives when in the Windows partition, again without any seeming issues.
Updating the driver simply generates another Code 31 error.
Appreciate this seems to be a known problem - is the a solution a novice use might be able to follow or should I simply ignore the error message?
Driver Date us 21/06/2006 and Driver Version is 6.1.7600.16385.

Hi ,
Thank you for visiting the HP Support Forums and Welcome. It is a great site for information and questions. I have looked into your issue about your HP ENVY 4-1204tx Ultrabook and issues with WiFi adapter is not working properly. Error codes in Device Manager in Windows 8.1 could be fixed by deleting any extra drivers. So I would uninstall all that is listed in the Network drivers in the Device Manager, restart the Notebook. Here is a list of Device Manager options, this might help.
Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system that need updating or reinstalling. Hope this helps. Thanks.

Preview in device central not working

Similar Messages

Maybe you are looking for