Preview in Finder shows full jpeg, but in preview, it crops it.

In a few pictures of i have, when i view them in a list in Finder, it picture it shows in the preview that opens up when i highlight the file is much bigger than when i open it up in any other program. Its hard to explain. Its as if hwen i open it up in a program, things are cropped out. But when it shows me a preview of the file in Finder, it shows me the whole image, uncropped. How can i view the entire file?

Hi -
Try going into Preview/Preferences/Images and select 'Scale large images to fit window' ...then hopefully you'll get the complete image.

Similar Messages

How do i restore my wifi setting back to the factory settings? I have changed it somehow :/ and now my wifi will not connect. My Airport is on and showing full strength but will not connect.

How do i restore my wifi setting back to the factory settings? I have changed it somehow :/ and now my wifi will not connect. My Airport is on and showing full strength but will not connect.

Ok, if other devices are connecting but just not your MacBook then let's start troubleshooting the MacBook to possibly find out why.
Please try each of the following, in order, until hopefully resolved:
Note the following are excerpts from an OS X Daily article.
* Turn Airport on & off – You can do this via the Airport menu bar or from the Network Preferences. This is the first thing you should try when troubleshooting Mac wireless problems.
* Make sure Wireless/Airport card software & firmware is up to date – This is usually done just by going to the Software Update menu, if there are any updates available for your Mac or Airport, install them.
* Delete and recreate connection – Try deleting and recreating/reestablishing the wireless connection, sometimes a setting can be corrupted and this may fix it.
* Create a new Network Location – Similar to the above suggestion, try creating a new and different wireless network location to see if it resolves the connection problems.
* Change DHCP auto settings to manual – sometimes there is a problem with the DHCP server, and if you manually set an IP address on the network you can be fine. Remember to set the IP to a high number so it wouldn’t interfere with other DHCP machines. As long as you have the subnet mask, router, and DNS settings configured manually as well, this shouldn’t be a problem.
* Flush the DNS cache – Launch the Terminal and enter the following command onto one full line within the Terminal: dscacheutil -flushcache
* Zap the PRAM – Reboot your Mac and hold Command+Option+P+R during restart until you hear another chime, let the Mac boot as usual.
* Delete Wireless Config files – Delete com.apple.internetconfigpriv.plist and com.apple.internetconfig.plist files from ~/Library/Preferences and reboot
* Trash your home directories SystemConfiguration – Remove all files within ~/Library/Preferences/SystemConfiguration/ and then reboot your Mac.
* Reset your Mac’s System Management Controller (SMC) – For MacBook and MacBook Pro’s: Shutdown the MacBook/Pro, remove the battery, disconnect the power, hold the Power Key for 15 seconds. Replace the battery, reconnect power, and zap the PRAM and wait for 2 chimes before letting the keys go. Let boot as usual.

My Ipod touch 5th gen is connected to wifi but internet doesnt work on it. It is showing full connectivity but when i try using itunes or safari, nothing loads.

My Ipod touch 5th gen is connected to wifi but internet doesnt work on it. It is showing full connectivity but when i try using itunes or safari, nothing loads.

Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

I have unlocked iphone 5.i tried to use it with tmobile.it shows full network but fails to activate and shows sim invalid.how to make it work?

i have unlocked iphone 5.i tried to use it with tmobile.it shows full network but fails to activate and shows sim invalid.how to make it work?

Who was your original carrier; did you call them to ask them to unlock your phone, and are you aware of what their unlock policy is (THey may only unlock for international sims and not US sims

I am sure I had a "find/show" duplicates funtion but I cannot find it now

I am sure I had a "find/show" duplicates funtion but I cannot find it now

Hi Don
Open iTunes and hit CTRL+B.
That will give you the Menu Bar, then go to View > Show Duplicate Items

Airport shows full bars but no networks listed, not connected

I recently began having an issue where my MacBook Pro (mid-2012, running 10.9.2) loses the wireless connection. However, the Airport icon in the menu bar still shows full bars (as if I were connected), but no networks are listed in the drop down menu.
Our other computer (a 2008 MacBook) and phones (moto G and Nexus 5) remain connected, at the same time, nor have they any similar issue. So it appears to be an issue specific to my MacBook Pro.
When I try to turn the Wi-Fi off then back on in the menu bar to see if it will reconnect, the Airport icon goes empty when I click off, but it does not come back to show the bars when I click it back on, remaining 'empty'. Yet I in the drop-down menu I regain the option to 'Turn Wi-Fi Off,' though no networks are listed.
Also, I use this machine daily at work on a university network Wi-Fi and have not had any issues (yet).
I've run Disk Utility after running into this problem, and it instructs me to Repair the Disk in Recovery Mode (via restarting the computer with CMD+R). Doing this, and sometimes doing just a normal restart, so far brings the connection back as normal.
This happened for the first time last weekend, happened again a couple days later, then twice this morning. So it's not constant but is enough that I'm seeking help.
I've scoured the system.log but don't really know what I'm looking for, thus not sure what to paste in here that would be helpful.
Thanks.

Unfortunately, I'm living in a spot in Europe that's not really near any Apple stores (and not sure I wholly trust the nearest 'Trusted retailer' to sort this out).
The more I dig through this issue, the more it's seeming to categorize with the numerous discussions already ongoing about wi-fi drops with Mavericks (here, here, and here for example). The jist of these is that there seems to be no true, ultimate "fix." I tried many of the suggested workarounds (deleting Bluetooth plist, keeping the Bluetooth off, dropping the Wi-Fi from the Network preferences pane and re-adding it, creating a new network location, unsyncing iCloud Keychain, resetting the PRAM, rebooting the SMC). None gives permanent fix thus far.
My hardware tests and Disk Utility reports still come back clean, as well.
And I'm again using this computer on a Wi-Fi network at work with zero problems so far.
Further, we still have another computer (older MacBook, running 10.6.8) and two phones connecting to the home Wi-Fi that haven't had any issues, so it's not likely as simple as a bad router or home connection.
Whether something in the configuration isn't playing nice with Mavericks, however, is an issue I'm going to try to sort out further (e.g., I've read that changing the wireless router channel has helped some people).

Hi there, i have a ipod nano general 7, just used one year. Now can't charge battery. When charging, the icon shows full power, but disconnect it. It becomes dark, no power. Why, the battery doesn't work ?

I've a ipod nano general 7, I've just used it one year. Now, I can't charge the battery. When charging, the icon shows full power. But when I disconnect, the ipod becomes dark, no power is keeped. Why, the battery doesn't work ? the life of my ipod's battery is too short ?

Howdy tamsg,
Welcome to Apple Support Communities.
The article linked below provides a lot of great troubleshooting tips that can help you resolve the issue with your iPod nano charging or displaying a blank black screen.
iPod nano (7th generation): Hardware troubleshooting - Apple Support
So long,
-Jason

Finder shows my pics, but iPhoto says No Items..

Hello, I hope someone can help me with this problem. I just transferred my photos from my pc to the folder "iPhoto" on my iMac. When I open Finder, my picture files are there, but when I open "iPhoto" and the Library is highlighted, there are no pics. At the bottom of the window it says "no items".
Why aren't the pics showing up in my Library? I decided to try and Import to Library (from File on menu), but it says cannot import because files are in my Library! lol??
Appreciate any help. This is my first MAC computer, so I'm just learning my way around it.. Thank you.

Drag them out of the iPhoto Library folder *in the Finder* and put them in a folder on the desktop. Open iPhoto. Then open the folder on the desktop, select the pictures in the folder, and drag them into the open iPhoto window. They will be imported into the library.
Pictures that are already inside an iPhoto Library folder can't be imported into that library or any other. Trying to do so will always produce the "unreadable files" error message. It's not a clear message, but this is why you're seeing it.

Battery indicator lights show full battery but won't turn on

I have an early 2008 non-unibody MacBook Pro. For about a year now, the status of the battery has been "replace soon." I was still getting a pretty good amount of time off of one charge so I wasn't too worried. This past Saturday morning, I woke up, checked the battery indicator lights on my computer (it had been sleeping since the day before) and it said it had about 60% percent so I opened it. I was on the Internet for about 10 minutes before it shut off without warning. It wouldn't turn back on when I pressed the power button, so I plugged it in and it turned back on. When I checked, the battery status was "replace now." After using it, I turned it back off and left for NYC for the weekend and didn't bring it with me. When I got home last night, I plugged it in and tried turning it on with no luck. The battery indicator light was flashing one light, so I just assumed it would need to charge for a bit before it would turn back on. After about two hours, when I went to bed, it still was flashing just one light. I kept it plugged in over night, and this morning when I checked it, the battery indicator lights showed that it was fully charged, but it still wouldn't turn on. I still kept it plugged in throughout the day just in case, but it still won't turn on even though all the lights are lit. Is the battery just showing me false information, or should I be worried about more than just the battery? Might I have to get a new computer altogether? I bought a replacement battery online so I'll have my answer in a few days, but I was just wondering.

And for what it's worth, I tried reseating the RAM and resetting the SMC, both with no luck. Could it be the logic board? The only reason I think it might not be is because my computer still worked a little bit after it first shut off, it was only after it was off for an extended period of time that it wouldn't turn back on.

Finder shows some but not all files in a folder

In some circumstances, Finder only shows some (but not all) of the files in a folder. Why?
I notice this with Excel autosave files in the Office 2011 Autorecovery folder (Macintosh HD ▸ Users ▸ Conor ▸ Library ▸ Application Support ▸ Microsoft ▸ Office ▸ Office 2011 AutoRecovery). In my case, Finder shows 34 files but "ls" in a Terminal window reports 40 files. The missing files do not start with a period (.) and have the same permissions as other files that show in Finder (-rw-r--r--@ 1 <myname> staff). Here's the last four lines of "ls -al" - the first two appear in Finder, but not the last two:
-rw-r--r--@ 1 myname staff    55296 8 Oct 2013 Word Work File D_1239425731.tmp
-rw-r--r--@ 1 myname staff    55296 8 Oct 2013 Word Work File D_1240072173.tmp
-rw-r--r--@ 1 myname staff    52796 13 Feb 11:08 safe1.xlk
-rw-r--r--@ 1 myname staff    95320 12 Mar 16:06 safe2.xlk
I have tried copying files from this folder to another folder, and/or changing their names. They still do not appear in Finder, nor are they visible in the File Open dialog of applications, even when the dialog is listing other files in that directory - but if I manually type the name into the File Open dialog, the app manages to find and open the file.
If I Spotlight-search for the file name, or search in Finder, without specifying that specific directory ("This Mac"), the file is not found, but if I direct the Finder search at that particular directory, then the search returns the relevant files.
So: why does Finder hide certain files when showing a folder, even though it can find and show those files if you specifically ask for them?
Now using OSX 10.10 (Yosemite), but I'm pretty sure I noticed this on OSX 10.8 as well.

So simple - thanks. I'd not been aware of the hidden flag, and now I've found the -O option on ls to display it.
Follow-on question: I now see that you can change the system-wide defaults to display hidden files with this...
     defaults write com.apple.finder AppleShowAllFiles -boolean true ; killall Finder
...but is there a way to specify this on a per folder basis? I'm happy enough to hide hidden files in general, but it would be nice if I could set an attribute/flag/whatever on the Office AutoRecovery directory that told Finder "in this folder, always display hidden files". Can I do this?

I am scanning printed photos into iPhoto as jpeg files but they are not showing as jpegs and I can't move them to another document - any ideas??

Ultimately, I am using these photos in a document I am writing and for some reason, some of the photos I have scanned in to iPhoto are not showing as jpeg files . . . the file type is blank and when I try to move them, I get a circle with a slash through it indicating NO instead of the green circle with a + indicating that the photo can be moved and dropped elsewhere. I am using an Epson scanner and am scanning as jpeg images. I also have an option to scan as a jpeg2000 image but am not sure of the difference in the files so continue to scan as just jpeg. Does anybody have an idea as to why these particular files are scanning in as jpegs but apparently there is something not registering correctly. Could it be that they were scanned without doing an overview scan first? I know it can't be that simple . . any help would be appreciated.

What scanner format settings dis you use? Are these color photos? If they are B/W did you scan as grayscale images? That could be the problem.
Are you able to open them with Preview? If so do a Save As, select full quality and save as a jpeg with a new file name. See if that file will import and work as intended.
OT

Drop Zones shows correct image but previews using old photo with same name

Everyday I do my customer DVD's in the same format. I capture, then edit, take eight screen shots (as jpeg's) to use in iDVD for the title screen. Then after I have checked the completed DVD I delete the Jpeg's and the iDVD project. I also delete the iMovie project as I use a standard template with promo at the start and credits at the end.
After upgrading to iDVD 6 (i did upgrade iMovie 5 to 6 but had to go back because of bugs) I have noticed that when I add my jpeg's to the drop zones they appear correct but the preview in the background shows another jpeg. Looks like a previous jpeg used for another project that I have since deleted.
Has anyone else had this problem. I found that if I go back and rename the latest images I want to use (i normally just use a generic name like c1, c2, c3 etc) it works fine until now. But I am sure this problem will resurface with time even using full names.
iBook 14" Mac OS X (10.4.4) 1.5GB Ram

All,
I had the same issue.
In my case, Blob Cache was enabled for the web application in which the image issue was occuring.
I cleared blob cache, and after doing a hard refresh of my browser, the correct image was then displayed.
To clear blob cache, do the following:
Navigate to:
http://yourwebapp:port/yoursite/_layouts/objectcachesettings.aspx
Select: "Object Cache Flush" and "Force all servers in the farm to flush their object cache" check boxes
Click the OK button
Hope this helps.

HT203167 Power failure when downloading album, screen appeared showing incomplete tack downloads. I followed prompts and restarted songs with errors, but I still have several songs that show full time (ie. 4:23), but don't play properly (they only play pa

Three songs out of 20 on album failed to download properly on my PC (windows XP) when connection was interrupted. Screen appeared prompting me to download incomplete songs. I did so, but three of the songs only play a few seconds even though they show full track times (ie 4:23). When I look to download the album or tracks again the messasge say all content has been downloaded. I downloaded entire album to my IPAD and it play fine. How can I repair the album on my PC? Thanx in advance ! MB

If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copies of the dodgy tracks and try redownloading fresh copies. For instructions, see the following document:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Otherwise, I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the items that are not playing properly. If you can't see "Report a Problem" next to the items, click the "Report a problem" button. Now click the "Report a Problem" links next to the items.

I try to connect to wifi in hotel. It shows its connected to the network but it never takes me to sign on screen and will not connect even though wifi shows full bars

I try to connect to wifi in hotel. It shows its connected to the network but it never takes me to sign on screen and will not connect even though wifi shows full bars

Have you tried clearing Safari? Clear Safari, close Safari completely and reboot your iPad. Try again.
Go to Settings>Safari>Cookies and Data.
If you are running iOS 5 or iOS 6 you close apps like this. Tap the home button once. Then tap the home button twice and the recents tray will appear at the bottom of the screen. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button twice.
If you are running iOS 7, you close apps this way. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

In my MacBook Pro, finder is crashing after logging in. It is showing crash report with Relaunch option, when i click on Relaunch option finder is working properly but i am unable to see top bar(Apple, Date, Wifi). Even in safari address bar not accepting

In my MacBook Pro(10.7.5), finder is crashing after logging in. It is showing crash report with Relaunch option, when i click on Relaunch option finder is working properly but i am unable to see Top bar(Apple logo, Date and Wifi etc... bar). Even in safari address bar, TextEdit not accepting any text means when type something not showing up and also i am unable operate any thing from keyboard. Plz help me…..

One thing that you can try is installing a 'fresh' version of OS X Lion. Boot into your Recovery partition (holding down the command and R keys whilst booting) and elect to install OS X from the Recovery screen. You need not erase your hard drive and you should not lose any of your data.
Oh, and just as a precaution, I would use Disk Utility, once you're in Recovery mode, to verify your hard drive before trying to install the OS again.
Clinton

Preview in Finder shows full jpeg, but in preview, it crops it.

Similar Messages

Maybe you are looking for