"preview" is fine, but it doesn't "burn" that way

I created an iDVD project from stuff put together in iMovie. (about 25 minutes) I burned about 20 copies just fine. Now, however, newly burned dvd copies are missing lots of stuff but the raw video from the camera - no title page, no music, no photos, etc. Genius bar took a quick look, thought they had something - but no. Although "preview" mode looks perfect, it still lacks the full content like I described. It's like an early version is being burned, not the completed project - even though in "preview" it is the completed version.

Thanks for the responses. Yes, by "preview" I'm refering to being in the iDVD project and clicking the "preview" arrow. The title page and "play" button are then functional and I can start viewing the movie by clicking the actual "play" button that has been added to the title page. - which plays the way I indend. While in that same project, however, if a dvd is burned it does not burn the completed project. The quality is fine, it's that much of the added content was not included in the burned version. All of this after already having burned 20-25 copies perfectly days before.
As far as your advice to save as a disk image, I'm unclear as to what that means because "disk image" isn't a choice when "saving as." I do sort of think it must have to do with "saving" and that the project may not have been saved correctly (or at all) after the project was completed and the first discs were burned. I'm still puzzled, though, why it would "preview" Ok if that were the case.

Similar Messages

When I print a Word document to a shared printer, print preview looks fine but the printed page has too much blank space at the top and doesn't print the bottom few lines.

When I print a Word for Mac document to a shared printer (that is connected to my iMac) from my Macbook Pro, print preview looks fine but the printed page has too much blank space at the top and doesn't print the bottom few lines. I have tried to adjust the margins and the page setup settings but to no avail. It used to print fine until recently. Is there a way to fix it so that the printer prints what print preview shows?

I should add that when I e-mail this document to myself and print it directky from the iMac, it prints fine.

I just downloaded AOL Desktop 1.7 for Mac and I can't get my email to work. It welcomes me but I know I have new email but it doesn't recognize that I have ANY mail at all. HELPPPPPPPP Please

i just downloaded AOL Desktop 1.7 for Mac and I can't get my email to work. It welcomes me but I know I have new email but it doesn't recognize that I have ANY mail at all. HELPPPPPPPP Please

Hey I've been all over and can't get any help. I'm well aware its not an Apple product but its an app for Mac OS so I thought I'd try here. I bought 2 new iMacs yesterday for my parents (5K) and I'm just trying to get them some help as there in their 70's and AOL is all they know.
But hey thanks for your help,

After installing IOS6: after erasing the history of Safari, the next time I fire up Safari, I see a split-second of the last displayed screen of Safari. Not a big issue but it should not be that way.

After installing IOS6:
After erasing the history of Safari, the next time I fire up Safari, I see a split-second of the last displayed screen of Safari.
Not a big issue but it should not be that way.

Download a new copy of the Firefox program: http://www.mozilla.com/firefox/all.html
Trash the current Firefox application to do a clean reinstall.
Install the new version that you have downloaded.
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

How to get a gif file to loop in PE11 with MAC 10.6.8? 480x320x72 pix/in. saved layers for web, check animate,preview plays fine but saved file doesnt

can't figure out why the gif file won't loop. Set up 5 photo frames 480x320pixels x 72pix/in in PE11, creating a layer for each. Each layer visible. Saved for web. Checked animate. The preview plays fine. But when I save the file and then click on the saved file to play, it re-opens the layers instead of playing the loop. The only SAVE option that shows up is "IMAGES ONLY"
Using photoshop elements 11 on MAC 10.6.8. Either I'm setting this up wrong or is there a hidden setting I need to change?

Thanks for the thought, Barbara B. Not sure if this counts, but emailed the file to myself [different email account, same computer] but it would not play as an email attachment. Any suggestions for a web upload where I can test your suggestion? Seems like there should be a different save option other than IMAGES ONLY but that is the only option I'm given.

Here is how the Help tell me of Moving Photos (BUT IT DOESN"T DO THAT!!)

I do exactly what it says but it doesn't copy the file to another event. I can however copy them anywhere else. It is **** of a work to copy them to the desctop and back to the event I want to have them be in...Do any1 have any Idea why it doesnt copy??
Select Events in the Source list.
Command-click to select two or more Events.
Double-click one of the chosen Events to open them.
If you have set your preferences to use the Event double-click to magnify photos, move your mouse to the bottom of the Event’s key photo and click the “Show photos” button when it appears.
Drag the photos you want to move into the Event you want to add them to.
To select multiple photos that are not next to one another, hold the Command key down as you click.
The moved photos will appear at the end of the Event.
You can also use cut and paste to move one or more photos from one Event to another.
To do so, select one or more photos you want to move and then choose Edit > Cut (or press Command X). Then select the Event you want to move the photos to, and choose Edit > Paste (or press Command V). The photos are removed from one Event and appear in the other.

It works for me. When you double click on one of the two selected Events (in the Events mode) do you get a window with the two events displayed like rolls were in iPhoto 6? I selected a photo from one of those events and dragged it (a green circle with the number of photos being dragged was created next to the cursor) into the other event. Worked as advertised like this.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Ukrainian text on preview is fine but gives junk char on print in smartform

HI All,
I am trying to print hardcoded ukrainian text in smartform. In preview it is coming correctly but while printing it gives some junk charecters.
During my analysis i found out that previously existing hardcoded text is coming fine on printing but it is showing different charecters(than the one on the printing) in smartform node and in print preview.
Regards,

Hi,
Do you use a device type that supports Cyrillic characters to create the spool and print? e.g. Device type SAPWIN, SAPWIN5 or Unicode device type SWINCF?
If you use a non-Unicode device type like SAPWIN or SAPWIN5, then the font used for these characters in the smartform should be a Cyrillioc font like COURCYR, HELVCYR or TIMECYR.
Regards,
Aidan

.swf file is fine but keyboard doesn´t work in IE

I finish a videogame and within Flash 8 Professional
everything is working fine, when I test the animation the
characters respond to the keyboard interactivity but when I try to
test the .swf in Internet Explorer there is no connection between
the keyboard actions and the animation. This is my first one and I
was happy that everything was working just fine until I tried to
use it in Explorer 7.0 Please, need help. Any clue?
The animation is in
http://www.fitnesselsalvador.com/videojuegos/index_videojuegos.html

paldepind wrote:Yop.
You could probably try running without an xorg.conf (still make sure hal is running).

Print preview looks fine but window space on worksheets prints all black

Recently purchased new HP Deskjet 1512 . I digitize embroidery and Chenille designs. Since purchasing the new printer,
intermittently the worksheets , which look fine on the print preview, will print completely black in the window workspace
area. The rest of the page prints ok. I have already had the problem trouble-shooted with my software company. I've been told that the printer driver is most likely the problem. Windows 7 Professional is my operating system. Has anyone encountered this problem???

Hey,
1. Uninstall the printer software (*click on the Windows 7 instructions) >> http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02259020&tmp_task=useCategory&cc=us&dlc=en&lc=e...
2. A clean boot of the computer to get the clutter out of the way. Here is how to do that >> http://support.microsoft.com/kb/929135
3. Restart the Computer.
4. Disable all of your firewalls and anti-virus scanners.
5. Reinstall the software off of hp.com.
Best of luck let me know how it goes.
I worked for HP.

Preview looks fine, but file on Internet isn't showing changes

My site looks great when i preview (firefox & Safari) in dreamweaver, but when i go to the internet it's not showing my corrections anymore. Why is that?

Here is the coding for my site the link is http://www.amethystenvironmentalllc.com. I re-did the homepage again but I get the same result. Looks great in dreamweaver's browser check but going outside of dreamweaver i get distortion.

IOS Internet apps connect fine, but safari doesn't -help!

I have a number of apps that connect fine to the internet via wifi ipad 3
Safari just shows a fast load progress bar zoom, but never more than a blank page
I have deleted history and cookies, and restarted the iPad...
Any ideas?

A small number of sites will come up.
Google chrome works better but not perfect
I think perhaps it's the wifi in this building

Airport extreme connects to router fine, but express doesn't

Hi,
So here is my setup:
Router -> Ethernet cable -> Airport Extreme = Wifi
This works absolutely fine. My problem is that I use an airport express to boost the extreme signal, and it's not working.
I get two errors, "Internet connection" and "No DNS Servers".
But after reading up on this, people are saying it's a problem with the communication between the express and the router.
But the airport extreme is communicating perfeclty fine with the router.
Any ideas would be very helpful,
Thanks

Welcome to Apple Discussions!
I probably can't help much, but I have occasionally had the same problem. You might try going to System Preferences>Network and look at your Airport connection. See if the diagnostics can help.
Good luck!

IMac connects via ethernet fine but iBook doesn't get the wifi connection

I'm not computer literate. I'm told this has to do with the airport sharing but it looks to me like the airport sharing has to do with reading OTHER wifi connections on my iMac. I don't need that. The iMac is connected to the internet just fine. My iBook and my iPhone don't get the wifi connection that it used to get and I can't figure out why not. Thanks in advance for any and all help.

Welcome to the Apple Discussions!
More information would be helpful. Your iMac is connected to your ISP's service with Ethernet? And you are sharing that internet connection for the iMac with other Apple devices from the iMac's AirPort card? Do I have that correct?
If so have you shared that internet connection according to Apple's protocol for doing so?
My Mac mini is connected to the internet by Ethernet cable to my ISP's gateway. I am sharing the Ethernet connection to two iPod Touches via AirPort from my Mac mini. This is how Apple says to configure a Mac to share the connection;
1. In Sys Prefs/Sharing highlight Internet Sharing (do not check the box)
2. Share the connection from: Ethernet (from the dropdown menu)
3. To computers using: AirPort (check the little box)
4. Press the button AirPort Options...
5. Name the Network
6. Use Automatic for the channel or assign a specific channel
7. Encrypt the network with one of the choices
8. For sharing with a non-Apple device; PC laptop, MP3 player, etc, you must use only a 5 alphanumeric character, 40-bit WEP password or only a 13 alphanumeric character 128-bit WEP password. That does not apply if you are setting up sharing for Apple devices only.
9. Press OK
10. Check the box for Internet Sharing
11. Answer any dialog boxes that pop up
Any other forms of configuring sharing the ethernet over AirPort ususally results in various issues.
Dah•veed

HT201272 I bought van Morrison album but it doesn't play , it shows in my purchased but doesn't work . I bought from same artist just one song and it plays fine but album doesn't work, thank u

unfortunate I can't download this item that I have purchased it 11/10/12, please credit $10.70 toward my visa. thank you Order ID: MHKD9W693B Receipt Date: 11/10/12 Order Total: $10.70 Billed To: Visa .... 0337 Your receipt No.155041685384

These are user-to-user forums, you are not talking to Apple here.
Do you mean that you can't download it or that you've downloaded them but the tracks don't play ?
Depending upon what country that you are in (music can't be re-downloaded in all countries) then try deleting the incomplete tracks from your iTunes library and redownload it via the Purchased link under Quick Links on the right-hand side of the iTunes store home page on your computer's iTunes : re-downloading.
If you aren't in a country where you can re-download music or if they re-download in the same state then try the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via Store > View My Account and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find that album and use the 'Report a Problem' link (iTunes support should reply within, I think, 24 to 48 hours).
Some people have had a problem with the 'report a problem' link (it's been taking people to this site on a browser instead of showing a form in iTunes) - if it does that to you then try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page.

WEP works fine but WPA doesn't

I'm using the WRT54G2 router and the WUSB54GC adapter, when I use WEP security the signal strength and connection is good, but when I try to use WPA, the connection keeps dropping and when it does connect, the signal strength is usually low to very low.
I would like to know if there's anyway to maintain connection using WPA.

So you wind up with a mix of wired and wireless connections working? Only wired? Only wireless? If you lose wireless only you might want to try to config the router by hand and eliminate wideband - use standard only and set it to the highest setting possible e.g. channel 11 2.462Ghz. If it's not a problem with ONLY wireless then forget all that. I was dropping wireless connections all the time until I got rid of 'auto' wideband 'auto' etc and switched to 'standard' with a fixed config on channel 11. It appears to be an radio interference problem.

"preview" is fine, but it doesn't "burn" that way

Similar Messages

Maybe you are looking for