Preview lag problem on Premiere Pro CC 2014

Hi everything!
I have a big problem on Premiere, when I work on every type of file the Program monitor lag too much.
I can see one frame every few second!
But the audio work well...
It seems that the computer have not enough power to show the video! And I have not modified or applied effect or transition!
I have got a MacBook Pro Early 2011 with the AMD Radeon HD 6750M (1024 MB) with the OpenCL 1.2 Engine, 2,2 GHz Intel Core i7-2720QM Quad Core (With Multithreading to 8 Core), 16 GB 1666 MHz RAM, with a Magnetic Disc (No SSD). The Machintosh is equipped by OS X Yosemite, reinstalled last week to try to fix the problem.
Before installing the CC 2014 I used the CS6 for 2 years without problem.
In Project Settings i have active the Mercury Playback Engine, and the other settings are not changed!
Someone had the same problem? Or know how to resolve? Because is not easy to use in this condition!
Thank you very much, Andrea.

Hi!
Thank you for the answer!
My source footage is 1080 50p AVCHD (from Panasonic AC-AG160AEJ), but the problem is on every type of footage, because I tried with a 720 50p from a Canon EOS 6D and the ProRes 422 1080 25p of BlackMagic Production Camera 4K.
The problem doesn't change with the weight of the footage, with all of the footage type the problem is the same.
I use the original 7200rpm 750GB hard disk connected with the SATA interface. I think that is SATA 3 at 6 Gbit/s.
I have tried with all playback resolution possible (Full, 1/4 and 1/8) but the problem doesn't change, even if I change the resolution.
Unfortunately with the format of last week I lost the CS6...
I'm writing from Italy and I use the PAL standard!
I attach a video of the problem and a picture of my graphic card, if they are usefull!
Video available at this link:
Lag Problem.mov - Google Drive
Thank you Ryan!

Similar Messages

  • Mask problem in Premiere Pro CC 2014

    Hello!
    I have a strange problem with the mask tool in Premiere Pro CC 2014, and made this video to explain the problem.
    Hope someone can help me.
    Thanks a lot
    /Per Haar
    Mask problem in Premiere Pro CC 2014 - YouTube

    But the whole point is that I am not able to place the mask properly because of the strange way it behaving. The purpose of a mask is that it should affect the area it is located above and not somewhere else, and it should also fill the entire mask and not only a spot at the center of the mask area.
    It has nothing to do with the order of things, or if I turn up feathering or extract the edge. It's all about the wired way it applys it self.
    If I apply and drag the mask to the corner, it should affect the corner and not somewhere near the center of my footage. As it is right now I have to zoom out to 25% and drag the mask way out of frame to affect the corner of my footage.
    /Per

  • Black Preview // No Picture in Premiere Pro CC 2014 // MCP Retina 15" (2013)

    Dear fellow Premiere Pro users,
    I am facing a problem recently.
    When editing it quite often happens that the picture in the sequence monitor and preview monitor from one moment to the other just turn black and stay so until I restart the app.
    I also witnessed a graphical distortion when using premiere. The screen "crashes" which means that it really looks like an electrically distorted pixel crash thing.
    Both occurences do not depend on what kind of footage is used. It happens with DSLR footage as well as Blackmagic Material.
    Both Problems do not seem to be connected to each other since they also appear seperately. But sometimes they pair up. Wehn that happens Premiere just freezes and I have to force quitting.
    I assume that there might be a problem with the graphic processor or the graphic card or both.
    Hardware and software check ups did not find any problems. I also have CUDA updated as well as all my other Adobe apps.
    The system partition has more than enough free space and i care about my MCP not to get too hot.
    Does anyone have that problem or can imagine what might go on inside the app or hardware?
    Thanks for your efforts and time. Appreciate it!

    Thanks for posting that info.  This mirrors the issues I'm seeing with DSLR footage.
    It's so hit or miss if it's going to flicker.  I'll delete renders and re-render and certain clips will be fine, others are now flickering.  I tried to make a test project that demonstrated this issue, but couldn't reproduce the effect.  RGB Curves and Three Way CC are in my list of effects, as well, where I see the issue.
    Just curious, is anyone else working on projects started in other versions/computers?  I've seen it on project started in PPro CC and finished in CC'14.  Saw it again on a project started on Mac in FCP7, converted to CC'14 Win7.  Quite honestly, I haven't been starting projects myself in CC'14 because of the flicker issues.
    As a workaround, I was hoping to import the CC'14 project back into CC or Media Encoder CC, but no luck there.
    Another issue I've had with CC'14 includes converting a CC project to CC'14, giving it to a CC'14 Mac user and the A/V sync is lost.  We abandoned that collaboration all together because of the issues.  CC'14 has been incredibly unproductive to my workflow, despite the great interface update and various other features added.  I haven't had mystery issues like this since CS4.  I'm keeping our post team in CC as much as possible until the issues are resolved.
    -JB

  • Audio rendering problems in Premiere Pro CC 2014

    Hi
    I'm rendering a very small project in Premiere Pro (just some cut and music). I tried to render it in H.264 but when I open it in windows media player there is no audio, when I copy it to my mobile phone I can't hear the audio neither. When I import the rendered file into premiere I can see the audio waveform. When I render the project in mpeg I can here the audio and when I clik the "match sequence settings" button I can hear it to (AVI) but I need H.264. What is the problem or what am I doing wrong.
    Thanks in Advance
    Michiel

    Windows Media Player sucks.  That's about the best 'why' I have for that.
    I don't own a smart phone, so I can't help with that one.  (I'm one of those old fashioned types who only uses a phone to make phone calls, and the proper tool for all the other activities the 'phone' has co-opted lately - like a computer for playing back computer media files. )

  • Premiere Pro CC (2014) does not show preview!?

    Hello there,
    I've a serious problem. Premiere Pro CC 2014 does not respond in the preview monitor.
    It's not like the program doesn't answer but it's only the way of working with footage.
    I can't watch my footage but I can set in- and outpoint. I can't work because I can't see anything.
    What's the matter? How can I fix this?
    Thanks

    More information needed for someone to help... please click below and provide the requested information
    -Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
    •What is your exact brand/model graphics adapter (ATI or nVidia or ???)
    •What is your exact graphics adapter driver version?
    •Have you gone to the vendor web site to check for a newer driver?
    •For Windows, do NOT rely on Windows Update to have current driver information
    •-you need to go direct to the vendor web site and check updates for yourself
    •ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
    •nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us
    Exactly what is INSIDE the video you are editing?
    Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
    Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
    http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
    Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download

  • Premiere Pro CC 2014 and Medie Encoder CC 2014 problem

    Hello there,
    Every time that I am willing to export my project my Premiere Pro CC 2014 stop responding all together. I tried the short cut (Commend+M) or going through the Manu bar. the result is the same, Premiere Pro CC 2014 just freezes and does not respond to anything till I force quit it and restart it allover again. I tried exporting from Premiere Pro it self, without using Media Encoder, but the problem remains the same.
    I am using the new Mac Pro. I heard Adobe Premiere Pro is experiencing  problems with the New Mac Pro. Is that true? Or is there other issue?
    Thank you and looking forward to hear back,
    Maruf

    I am having a similar problem.
    Premiere Pro CC 2014 suddenly decided to crash every time I export to either Adobe Media Encoder or within Premiere itself.
    The encode will usually go for 5-10 minutes before the programs either spits out a "serious error has occurred" window, or it just sits there frozen until I force quit.
    I did find a work-around for the moment. If I open AME and FILE > OPEN, select my project and then the sequence I want, AND put it in Software render mode, it will work.
    My timeline is 2K, 58 minutes in 23.976
    Only effects applied are Lumetri LUTs - no third party.
    I've exported as recently as a week ago without issue.
    Running OSX 9.5 on an X99 board
    3.75 GHz 8-core
    64GB 2400 MHz RAM
    EVGA Titan Black 6GB
    Because I can get my renders out, I am not too concerned. Either there is something wonky with my timeline that screws with any graphics enabled rendering, or there is a bug that is have the same effect. I will try rendering on another of my edit bays that utilizes a GTX 580 that I KNOW works. The Titan is pretty new to my workflow.
    Thanks Adobe, for checking this out.

  • Problems with Mac Mini and Premiere Pro CC 2014

    I am new to video editing with a background in graphic design and typically do short corporate videos.
    I am currently using a Mac Mini (late 2012 model), running Mavericks 10.9.5. And I keep having a problem with Premiere Pro CC 2014 freezing in the program monitor, while scrubbing through the timeline.
    Here are my specs:
    Processor: 2.6 GHz Intel Quad Core i7
    Memory: 16 GB
    Graphics: Intel HD Graphics 4000 1024MB
    I am also using a 2TB Fantom G-Force Megadisk external HD to store all my media. It is connected via a Firewire 800 cable
    I'm wondering if the freezing is caused by Mac Mini having a integrated graphics card vs. a discreet one. Has anyone else had any problems like this using a Mac Mini?

    I am new to video editing with a background in graphic design and typically do short corporate videos.
    I am currently using a Mac Mini (late 2012 model), running Mavericks 10.9.5. And I keep having a problem with Premiere Pro CC 2014 freezing in the program monitor, while scrubbing through the timeline.
    Here are my specs:
    Processor: 2.6 GHz Intel Quad Core i7
    Memory: 16 GB
    Graphics: Intel HD Graphics 4000 1024MB
    I am also using a 2TB Fantom G-Force Megadisk external HD to store all my media. It is connected via a Firewire 800 cable
    I'm wondering if the freezing is caused by Mac Mini having a integrated graphics card vs. a discreet one. Has anyone else had any problems like this using a Mac Mini?

  • Premiere Pro CC 2014 and Media Encoder CC 2014 not completing encode.

    This is a project that I have been successfully encoding in short segments until now.  Now when encoding, session runs about 10-15 minutes and then ends without error messages. 
    Removing effects and changing to Mercury PB Engine SW did not help. 
    Also tried disabling metadata as suggested in another forum. 
    When CUDA used, logged as "Encoding failed."  When Mercury SW used, logged as "File Successfully Encoded" even though video file is only 6 KB with no content.
    Premiere Pro Build 8.1.0 (81)
    Media Encoder Build 8.1.0.122
    Windows 7 Professional
    Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz
    8 GB RAM
    NVIDIA GeForce GT 610 (9.18.13.3788)

    I am having a similar problem.
    Premiere Pro CC 2014 suddenly decided to crash every time I export to either Adobe Media Encoder or within Premiere itself.
    The encode will usually go for 5-10 minutes before the programs either spits out a "serious error has occurred" window, or it just sits there frozen until I force quit.
    I did find a work-around for the moment. If I open AME and FILE > OPEN, select my project and then the sequence I want, AND put it in Software render mode, it will work.
    My timeline is 2K, 58 minutes in 23.976
    Only effects applied are Lumetri LUTs - no third party.
    I've exported as recently as a week ago without issue.
    Running OSX 9.5 on an X99 board
    3.75 GHz 8-core
    64GB 2400 MHz RAM
    EVGA Titan Black 6GB
    Because I can get my renders out, I am not too concerned. Either there is something wonky with my timeline that screws with any graphics enabled rendering, or there is a bug that is have the same effect. I will try rendering on another of my edit bays that utilizes a GTX 580 that I KNOW works. The Titan is pretty new to my workflow.
    Thanks Adobe, for checking this out.

  • Premiere Pro CC 2014 and Media Encoder CC 2014 Crashing constantly

    Running out of options and ideas...
    Symptom: Every time I work on any project in Premiere Pro CC 2014 or try to render out in Premiere Pro CC 2014 or Media Encoder CC 2014, the software crashes after 2-3 minutes of use/rendering when the GPU is enabled in Premiere/Media Encoder, or after 5-10 minutes of use/rendering in software only mode.  The crash is a software crash, Windows continues to run fine.
    I have tried all the standard list of steps that adobe reps post on threads like these - clearing media cache, software only on render, new project, etc.  https://helpx.adobe.com/x-productkb/global/troubleshoot-system-errors-freezes-windows.html
    Windows event is not that helpful to me:
    Faulting application name: Adobe Premiere Pro.exe, version: 8.2.0.65, time stamp: 0x5486db4a
    Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
    Exception code: 0xc0000005
    Fault offset: 0x00007ff5ecb4de40
    Faulting process id: 0x1dc8
    Faulting application start time: 0x01d04a503cd82df2
    Faulting application path: C:\Program Files\Adobe\Adobe Premiere Pro CC 2014\Adobe Premiere Pro.exe
    Faulting module path: unknown
    Report Id: cacdfbab-b717-11e4-826d-8863dfc268bc
    Faulting package full name:
    Faulting package-relative application ID:
    I have wiped adobe off the machine and reinstalled - same problem.  I have tried projects that crash the machine on other machines and it works fine.
    The machine is new, clean install and runs everything else great - 3ds max, high res games, scientific computing - max memory use, etc.
    Spec:
    5K iMac running bootcamp and Windows 8.1
    Intel Core i7-4790K @ 4.0 GHz
    32 GB ram
    1TB SSD
    AMD Radeon R9 M295X 4GB GDDR5
    I have used this bootcamp/imac configuration for 5+ years on 3-4 machines and everything has always just worked great.  Guess it was my time for a problem, but I'm open to new ideas to try...
    Finally - I hope someone from Adobe reads this.  I have spent 2 nights on the phone with support.  The first night I got an over confident answer that it's a gpu driver issue, just go with software only (no luck - same crashes and different drivers aren't solving the problem).  Tonight I was hung up on "by accident" as the agent looked up my video card after waiting 15 minutes to talk to someone, only to be hung up on a second time while on hold after calling back and waiting 20 minutes (because I assume the Adobe call center closed). No message to say so, just hung up on. An overall very disappointing experience.
    Thanks in advance to anyone with ideas on things to try,
    Cheers!

    I am having a similar problem.
    Premiere Pro CC 2014 suddenly decided to crash every time I export to either Adobe Media Encoder or within Premiere itself.
    The encode will usually go for 5-10 minutes before the programs either spits out a "serious error has occurred" window, or it just sits there frozen until I force quit.
    I did find a work-around for the moment. If I open AME and FILE > OPEN, select my project and then the sequence I want, AND put it in Software render mode, it will work.
    My timeline is 2K, 58 minutes in 23.976
    Only effects applied are Lumetri LUTs - no third party.
    I've exported as recently as a week ago without issue.
    Running OSX 9.5 on an X99 board
    3.75 GHz 8-core
    64GB 2400 MHz RAM
    EVGA Titan Black 6GB
    Because I can get my renders out, I am not too concerned. Either there is something wonky with my timeline that screws with any graphics enabled rendering, or there is a bug that is have the same effect. I will try rendering on another of my edit bays that utilizes a GTX 580 that I KNOW works. The Titan is pretty new to my workflow.
    Thanks Adobe, for checking this out.

  • Premiere Pro CC 2014 keeps crashing on startup.

    So, I just had a fresh Windows 7 install because for the last 3 days I've been having a problem with Premiere Pro CC 2014 and this was my last resort, even so, it didn't work.
    Everytime I try to start Premiere Pro CC 2014 this happens:
    I know this has been a problem to a lot of people, but I've tried every solution I've seen so far: tried the Premiere Pro CC version, reinstalled Premiere Pro CC 2014, updated Intel Graphic card, disabled Intel Graphic card, renamed Adobe's AppData folder, tried running in compability mode, reinstalled Quicktime, unistalled Quicktime. And I just formatted my computer, so I really don't know what else can I do.
    I'm running Windows 7 Ultimate with a Intel Core i3-4330 CPU @ 3.50GHz, Sapphire Radeon R7 260x, 8GB RAM.
    My Event Viewer logs:
    "Faulting application name: Adobe QT32 Server.exe, version: 8.0.1.21, time stamp: 0x53c7afcc Faulting module name: ImageRenderer.dll, version: 8.0.1.21, time stamp: 0x53c76485 Exception code: 0xc000001d Fault offset: 0x001e5353 Faulting process id: 0x114c Faulting application start time: 0x01cfbfc08ce68291 Faulting application path: C:\Program Files\Adobe\Adobe Premiere Pro CC 2014\32\Adobe QT32 Server.exe Faulting module path: C:\Program Files\Adobe\Adobe Premiere Pro CC 2014\32\ImageRenderer.dll Report Id: cb4f1cdb-2bb3-11e4-82a4-97822361737e"
    "Windows cannot access the file  for one of the following reasons: there is a problem with the network connection, the disk that the file is stored on, or the storage drivers installed on this computer; or the disk is missing. Windows closed the program Adobe QT32 Server CC 2014.0 because of this error.
    Program: Adobe QT32 Server CC 2014.0" "Faulting application name: Adobe Premiere Pro.exe, version: 8.0.1.21, time stamp: 0x53c7b17f Faulting module name: ImageRenderer.dll, version: 8.0.1.21, time stamp: 0x53c7659e Exception code: 0xc000001d Fault offset: 0x00000000001f5382 Faulting process id: 0xc70 Faulting application start time: 0x01cfbfc086d5619d Faulting application path: C:\Program Files\Adobe\Adobe Premiere Pro CC 2014\Adobe Premiere Pro.exe Faulting module path: C:\Program Files\Adobe\Adobe Premiere Pro CC 2014\ImageRenderer.dll Report Id: cb4a3ac9-2bb3-11e4-82a4-97822361737e"
    "Windows cannot access the file  for one of the following reasons: there is a problem with the network connection, the disk that the file is stored on, or the storage drivers installed on this computer; or the disk is missing. Windows closed the program Adobe Premiere Pro CC 2014.0 because of this error. Program: Adobe Premiere Pro CC 2014.0"
    Thank you.

    Hi zerebelo,
    Please install Windows 7 Serivce Pack 1 and that should fix it.
    Let me know if that helped.
    Thanks!!!
    Rameez

  • Premiere Pro CC 2014.2 not stable on my system

    Mac OS 10.10.1
    I am having problems with Premiere Pro CC 2014.2 that make it almost unusable on my system. All other software, including AE, Audition, Prelude, Photoshop etc. working well.
    The symptoms, which are not specific to any one project - but seem to effect all equally - are:
    1) Intermittently, I loose the ability to play clips or the timeline. I can drag the playhead around, but nothing plays, nor does the viewer or program monitor change or update. I can't use the space bar for play, nor can I click the play button with the mouse.  Either action requires a re-start.
    2) Exiting the application, Premiere Pro will not completely shut down. It goes into some kind of limbo state. The only way to shut the application down is to use the Force Quit command from the Apple Menu. Once the application has been Forced to Quit, it will not restart until the computer has been restarted. It will just bounce up and down in the dock and never launch completely.  The only way to launch it again is to completely restart the computer. If the application has been force quit, when I shut the computer down, I get the spinning wheel for a very long time during the shut down process, but the computer does completely shut down on its own. After I restart, Premiere Pro starts up promptly.
    What I have done so far:
    Verified Disk Permissions
    Run Disk Warrior on all disks.
    Trashed Premiere Pro preferences
    Uninstalled the Premiere Pro app, and then re-installed a fresh download.
    My computer specs:
    And I am connected to 2 Thunderbolt Pegasus Raids for the media.
    Any help much appreciated.
    MtD

    Kevin Monahan wrote:
    Is your Mercury Playback Engine set to CUDA or OpenCL? Make sure it is in CUDA.
    Yes, it is.
    Does this happen with brand new projects, as well?
    Yes.
    Have you checked the permissions of all your Adobe folders? Are they set to Read Write?
    They were all set to read/write, I did the procedure as outlined in the link.
    Have you checked the permissions of your Mac HD and your media drives?
    Yes.
    If you create a new user with Admin privileges, does that work better?
    I have not tried this yet.
    If you disconnect your media drives do you see any improvement in stability?
    No.
    This problem does not, to me, seem to coincide with the either the OS upgrade or Software upgrade. It has begun to appear over the last week or so, and is occurring more and more often.
    Any help you can give appreciated.
    MtD

  • Can't import MTS with Premiere Pro CC (2014)

    I have the problem with Premiere Pro CC (2014) and Media Encoder CC (2014) ! "Compression of media is not supported" (or something like that, it's in german...)
    In After Effects CC (2014) and Prelude CC (2014) there is no problem importing these files.
    MTS from a Panasonic HC-V550, files from a AVCHD folder structure, 1080p 50 fps.
    I did already a project with theses file in Premiere Pro CC a few month ago!

    Hi Das Modular,
    Move the media to another directory, drive, or merely change the name of the folder where your media resides. You should be able to import the files after that.
    Thanks,
    Kevin

  • Alle Tastenkürzel verloren in Premiere Pro CC 2014

    Ich habe ein eigenartiges Problem - bei Premiere Pro CC 2014 auf dem Mac (OS X Yosemite, aktuelle Version) funktionieren keine Tastenkürzel mehr - einschließlich Abspielen (Leertaste), Löschen (Rücktaste) oder Rückgängig (Command + Z). Einfach alles weg.
    Tastatur ist angeschlossen und funktioniert einwandfrei. Auch in z.B. After Effects ist alles in Ordnung.
    Wenn ich in die Tastenkürzel-Einstellungen gehe, sehe ich, dass keiner der Funktionen in der Liste ein Kürzel zugeordnet ist. Wenn ich es manuelle einstelle, funktioniert es wieder. Ich kann allerdings nicht sämtliche Funktionen manuell wiederherstellen...
    Wenn ich die Keyboard-Layout-Presets aus der Dropdown-Liste wähle (z.B. Adobe Premiere Pro CS6), bleibt die Liste der Befehle leider leer, es ändert sich nichts.
    Weiß jemand Rat?

    Lösche mal Deine Voreinstellungen:
    halte Shift+Alt beim starten von Premiere.
    Alternativ:
    Auf Mac findest Du die Voreinstellungen auch unter:
    UserFolder>Documents>Adobe>Premiere-Version>Versionsnummer.
    Falls der ordner versteckt ist:
    Access hidden user library files | Mac OS 10.7 and later

  • Premiere Pro CC 2014 and AME using only 25% of CPU

    Hello all,
    I've been having this problem with Premiere PRO CC 2014 and that when exporting it uses only 25% of my CPU thus taking 4 times longer than CS6 to export the same file project. I read a couple of forums with people having the same problems, I tired disabling CPU parking, disabling "Import sequences natively" in AME but no result.
    Quick PC specs:
    i5 4670
    16GB of RAM
    GeForce GTX 760 4GB DDR5
    Everything for Adobe including the video files in use are of Samsung's SSD drives. Using CUDA as the render engine.
    Currently one hour and 4 minutes clip in 4k takes about 52 hours to encode in Premiere CC 2014 and 9hr to encode the same project in CS6. Any ideas?

    Take a look at your GPU usage with something like GPU-Z to see if both Premiere versions are using the same amount of MPE GPU hardware acceleration.  Actually with CC 2014 it might work faster because Adobe added in more 4k effects/features for GPU acceleration.
    You might want to download our Premiere Pro BenchMark (PPBM) and run it on both versions.  The H.264 very complex timeline has 4K material in it and usually shows Premiere Pro 8.xxx take about only half the time that Premiere Pro CS6 take to export that same timeline.

  • Premiere Pro CC 2014 imported video length mismatch

    I've got a problem in Premiere Pro CC 2014 where the audio and video get out of sync the farther you go into the imported clip.  While troubleshooting I noticed that Premiere isn't properly reading the video length of the imported file.  Windows reports the right length, as do VLC and Handbrake, but Premiere shows a time about 30 seconds shorter than the real file.  I've included the file info from MediaInfo and Premiere here.  Windows reports a (correct) length of 1:56:39.  This happens on two different Windows computers both running the latest release of Premiere Pro.  Has anyone seen this?  I've tried to search for similar issues but haven't found anything like this.  Thanks!
    ----- MediaInfo -----
    General
    Complete name                            : C:\Users\aprice\Desktop\CI_EOUGame.mp4
    Format                                   : MPEG-4
    Format profile                           : QuickTime
    Codec ID                                 : qt 
    File size                                : 3.22 GiB
    Duration                                 : 1h 56mn
    Overall bit rate                         : 3 954 Kbps
    Encoded date                             : UTC 2015-01-10 02:38:58
    Tagged date                              : UTC 2015-01-10 04:35:38
    Writing library                          : Apple QuickTime
    Video
    ID                                       : 1
    Format                                   : AVC
    Format/Info                              : Advanced Video Codec
    Format profile                           : [email protected]
    Format settings, CABAC                   : Yes
    Format settings, ReFrames                : 4 frames
    Codec ID                                 : avc1
    Codec ID/Info                            : Advanced Video Coding
    Duration                                 : 1h 56mn
    Bit rate                                 : 3 756 Kbps
    Width                                    : 1 920 pixels
    Height                                   : 1 080 pixels
    Display aspect ratio                     : 16:9
    Frame rate mode                          : Variable
    Frame rate                               : 29.871 fps
    Minimum frame rate                       : 7.500 fps
    Maximum frame rate                       : 30.000 fps
    Color space                              : YUV
    Chroma subsampling                       : 4:2:0
    Bit depth                                : 8 bits
    Scan type                                : Progressive
    Bits/(Pixel*Frame)                       : 0.061
    Stream size                              : 3.06 GiB (95%)
    Language                                 : English
    Encoded date                             : UTC 2015-01-10 02:38:58
    Tagged date                              : UTC 2015-01-10 04:35:38
    Audio
    ID                                       : 2
    Format                                   : AAC
    Format/Info                              : Advanced Audio Codec
    Format profile                           : LC
    Codec ID                                 : 40
    Duration                                 : 1h 56mn
    Source duration                          : 1h 56mn
    Bit rate mode                            : Constant
    Bit rate                                 : 192 Kbps
    Channel(s)                               : 2 channels
    Channel positions                        : Front: L R
    Sampling rate                            : 44.1 KHz
    Compression mode                         : Lossy
    Stream size                              : 160 MiB (5%)
    Source stream size                       : 160 MiB (5%)
    Language                                 : English
    Encoded date                             : UTC 2015-01-10 02:38:58
    Tagged date                              : UTC 2015-01-10 04:35:38
    ----- End MediaInfo -----
    ----- Premiere -----
    File Path: C:\Users\aprice\Desktop\CI_EOUGame.mp4
    Type: MPEG Movie
    File Size: 3.2 GB
    Image Size: 1920 x 1080
    Frame Rate: 29.97
    Source Audio Format: 44100 Hz - compressed - Stereo
    Project Audio Format: 44100 Hz - 32 bit floating point - Stereo
    Total Duration: 01:56:09:09
    Pixel Aspect Ratio: 1.0
    ----- End Premiere -----

    Thanks Ann.  I noticed that in the MediaInfo output and thought it was strange, since I don't typically deal in variable frame rate footage.  After converting it to constant frame rate with Handbrake the problem appears to have been resolved.  I'm working to find out if the program that records the video can be switched to constant frame rate mode to fix this issue permanently.  Thanks for the help!

Maybe you are looking for