Preview loading is extremely slow in camera roll

Hi All,
I updated my ipad to 8.1. After that, preview loading is extremely slow in the camera roll. If I try to scroll between the photos in the camera roll, it took 4 to 5 seconds to move from one image to another image. This happens after the my ipad has been updated  to 8.1
Is there any solution for this.

Hi erodevarun,
Thanks for the question. After reviewing your post, it sounds like the Photos app is running slowly. I would recommend that you read these articles, they may be helpful in troubleshooting your issue.
Force an app to close in iOS - Apple Support
Restart or reset your iPhone, iPad, or iPod touch - Apple Support
Use iTunes to restore your iOS device to factory settings - Apple Support
Thanks for using Apple Support Communities.
Have a nice day,
Mario

Similar Messages

  • How to re-load photos from pc onto camera roll on iphone 4

    I have managed to transfer all of my wife's photos from her Camera Roll (Iphone 4) to PC and re-distribute them into existing folders under "My Pictures"
    Is there a way to re-load those back onto the Camera Roll on her iPhone 4?
    (Hope so - I'm not in her good books right now:(      )
    Thank you in advance
    Valentino1

    Camera Roll is only for photos taken by the iPhone or downloaded from the web.  Photos synched back to the phone from the computer are stored in Photos.

  • Preview.app is extremely slow opening 500 jpg from external HD

    Hello everybody,
    yesterday I wanted to open a folder of approx. 500 jpg-Files from an USB-HD for a slideshow. I switched to the folder and opened all files in it (only jpg) via Command-A, Command-O.
    Preview.app took several minutes to load the images.
    After I copied the folder (1,27GB) to my internal Harddisk, the same process took a glimpse of 2 or 3 seconds.
    What's wrong with the opening from an external source?
    Why does Preview.app open all Images at once instead of opening them when being switched to during the slideshow, and why is the same process so much faster when loading from an internal HD?
    Can you recommend any other (free) slideshow apps?
    Thanks for any comments
    Andreas
    PowerBook 15'' Mac OS X (10.4.8)

    Andreas, you seem to have at least partially answered your own question. review won't play a Slideshow until all the images are loaded, and from an external drive connected by USB it takes 3.5 minutes for you to load them.
    If you just want to play a slideshow of the pictures then you do not need to use Preview at all. In a Finder window, select the pictures you want to include, Control-click and select slideshow. See if this plays immediately…
    …Actually, I just hooked up my Firewire external and tried it. The slideshow played immediately.
    Matthew Whiting

  • Safari is loading webpages extremely slow and not loading images...

    Not loading webpages a lot of the time and not loading images on sites such as Facebook, Twitter, etc. I'm new to Mac and I'm running Safari on a Mac Mini. Help? Also deleted ~/Libraries/Safari and it didn't work.

    Please answer as many of the following questions as you can.
    1. Have you restarted your router and broadband modem since you first noticed the problem? If the answer is no, do that now and see whether there's any change.
    2. Are any other web browsers installed, and are they also slow?
    3. What about other Internet applications, such as iTunes and the App Store?
    4. Are there any other devices on the same network that can browse the Web, and are they also slow?
    5. If you can test Safari on another network, is it slow there too?
    6. If you connect to your router with Wi-Fi and you can also connect with Ethernet, do that and turn off Wi-Fi. Any difference?

  • Forum load time extremely slow

    Hi,
    One of my biggest concerns with the forum is that it takes really long time to load a web page!!! I visit various forums everyday, and even with a lot more ads and scripts and applets, they load much faster than this forum. It puzzles me what is so complex about this forum that it requires so much time to load a page. I've tried browsing here on Internet Explorer 6, Opera 9.62 and Google Chrome and it is slow on ALL of them! This is a serious concern, and should be taken care of ASAP.
    Also, the graphical editor of posts is a little buggy on Opera, which i mainly use. So hopefully it can be taken care of in the future. and the addition of a 'Quick Reply' option like in other forums will be much appreciated.
    Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
    Click on the BLUE KUDOS button on the left to say "Thanks"
    I am an ex-HP Employee.
    This question was solved.
    View Solution.

    We are aware of the slowness issues.  HP is working to resolve the issue.
    Like you, I'm looking forward to that being solved. =)
    Message Edited by DaniW on 11-21-2008 07:16 AM

  • ReportDocument.Load() is extremely slow.. What does it do?

    We are having issues with reports taking an extremely long time to load at customer sites.  We have isolated the issue down to the Load() method of the ReportDocument.  On some machines this takes a split second and on others, using the same report, same system, and same data it takes 25 - 40 seconds per Load() call.  We are having issues isolating what is causing the disparity between computers.
    What steps does the Load method take to fully load the report?
    For example, does it query the printer?  Does it query for database access?  Does it attempt to verify the database?  Our reports are designed in-house and sent to the customer.  We report the connection and the printer after the load().  So, the printer and database do not exist at the customer's site.
    We are using .NET 4.0, Crystal Reports for Visual Studio 2010 Support Pack 1.  The 32-bit runtime is deployed at our customer sites.  The reports have been loaded from a local C:\ drive and from a network share with no difference in performance.  We have disabled virus scanning, and all other services that may be running.  The issue occurs on Windows 2008 64-bit and Windows 7 32-bit.  We have looked at previous existing threads on the forum, and tried to make all the required changes to the reports - no specific printer, updating the database, no saved data, etc.
    It is a huge performance difference.  Running five reports based off a single piece of data on some systems takes 5 seconds.  On these machines it is taking almost four minutes.  Obviously the customers are very unhappy.
    Thanks for the help on isolating and solving this issue.
    Kyle
    Edited by: kmfisher on Oct 31, 2011 10:46 PM

    Don,
    I was able to trace using crpe32 and got the .glf file created. It is pretty huge. I did the search for Load and found the hit:
    b4dc3a1e-2440-ea84-eb17-a949c19e2e0b|2011 11 07 10:30:22:406|-0600|==| | |Diagnostics| 8828|8896|| |0|0|0|0|CRPE.CRPEBackgroundThread|localhost:8828:8896.1:1|-|-|CRPE.CRPEBackgroundThread|localhost:8828:8896.1:1||||||||||||..\..\src\reportdef\containers\rptdoc.cpp:1487,Load document,Start Time,"10:30:22"
    |58fc346b-38f7-eb64-484b-24e67bdf330a|2011 11 07 10:30:22:406|-0600|==| | |Diagnostics| 8828|8896|| |0|0|0|0|CRPE.CRPEBackgroundThread|localhost:8828:8896.1:1|-|-|CRPE.CRPEBackgroundThread|localhost:8828:8896.1:1||||||||||||..\..\src\reportdef\containers\rptdoc.cpp:1488,Load document,Document name,"C:\Users\A.COM\AppData\Local\Temp\PostTicketJournal {85C9B513-4A4E-487A-A83C-A6B06AF9979E}.rpt"
    |2648a0f8-8150-a3f4-0b6f-1374d9d5a956|2011 11 07 10:30:22:406|-0600|==| | |Diagnostics| 8828|8896|| |0|0|0|0|CRPE.CRPEBackgroundThread|localhost:8828:8896.1:1|-|-|CRPE.CRPEBackgroundThread|localhost:8828:8896.1:1||||||||||||..\..\src\reportdef\containers\rptdoc.cpp:1504,Load document,Access mode will discard saved data,"FALSE"
    I am not able to locate the end of the load document process ? What will be logged to signify the end of the load has occurred ?
    I searched for "End Load" etc..but no hits were found. Is there a way, I can send this glf to you to help us understand what the ReportDocument.Load is doing. I do see that the server "localhost" is being used.
    Please advise,
    Thanks,
    Amit

  • RAW picture previews loading extremely slow since IOS 8 using the Apple iPad Camera Connection Kit

    Hi all
    First, sorry for my poor english, I hope you understand my problem.
    Device is iPad Air Wi-Fi with IOS 8.
    I just realized this issue yesterday. I wanted to import some of my RAW pictures from my Nikon camera's SD card, using the Apple iPad Camera Connection Kit. In the Photos app / Import tab, the RAW picture previews show extremely slow. It takes a second to show each photo preview before import. A second for every single picture preview
    For example, if you have 500 pictures on your SD card, and you want to import pictures from this card but just some selected, then you need to wait for an overview preview a lot of minutes. On IOS 7 this process was maybe 10 seconds for all of the pictures...

    Same problem here. As a professional wedding photographer, sifting through my photos while on the go is the reason for me purchasing the iPad (Retina) 2 years ago, I now have an $800 paperweight after iOS8.x.x. Apple, if you actually read these, please inform your engineers to fix this in the next update or at least provide us with a solution to return to iOS7.x.x. Makes me wonder if there is any QA or testing that goes on before an update is released. As an FYI, here's my thread from a few weeks ago: Native Photos App, Slow... No, I mean really slow.

  • Since upgrading to Mavericks, Mail is extremely slow to load preview pane or show email when mailbox is double-clicked. Is this a known issue?

    Since upgrading to Mavericks, Mail is extremely slow to load the preview pane or show email when mailbox is double-clicked. Is this a known issue? Or is there a solution to this issue?

    Hi AngieLynch,
    Thanks for visiting Apple Support Communities.
    It sounds like you're seeing some unexpected behavior in Mail.
    Before troubleshooting on your computer, I'd strongly recommend backing up your data to an external hard drive with Time Machine, if you haven't already. This article can help with setting up Time Machine:
    Mac Basics: Time Machine backs up your Mac
    http://support.apple.com/kb/ht1427
    Next, try creating a new user account on your computer. You can add your email account to Mail in the new user account. If Mail is more responsive in the new user account, then Mavericks is working fine and the behavior is caused by conflicts in your own Mail or user account. 
    These articles walk you through creating a new user and setting up Mail:
    OS X Mountain Lion: Create a new user account (applies to Mavericks, too.)
    http://support.apple.com/kb/PH11468
    Configuring Mail for your email account
    http://support.apple.com/kb/HT1277
    Best,
    Jeremy

  • FCP 6.0.1 Running and previewing extremly slow

    Ever since I upgraded to 6.0.1 FCP is running extremly slow.
    In my current project, I brought in a HDV QT.mov that needed to be Chroma Keyed and color adjusted. Previewing the chroma keyed file looks horrible (all jagged) unless I render it. That takes time. Then I added a piece of stock DV footage under that, blurred the background and it played back like crap until I rendered it. More time. And so on.
    I can't make any adjustment and see how it looks without rendering.
    When I was working in 5.1 FCP I was able to add all type of files and zip right through them pretty much. Now I can't seem to get my settings right or something...so as I apply different effects or filters I can never see on the fly how it looks without rendering it first. Then of course...if it's not right...I tweak it again but can't see how that looks until I render it again.
    All my video files resides on a RAID that I created from 2 of my internal drives and it also is my scratch & render disk.
    It's eating my lunch on production time.
    Any suggestions Please.

    You could try setting the render in the sequences you work with to ProRes. Found in that sequence setting's video processing tab.
    But the real fix is to not work in HDV at all. If you have an Intel mac, a capture card like the Kona LHe card will transcode your HDV directly to ProRes... or AJA's Io HD (at the high end of this workflow) will transcode the HDV to ProRes on board the box itself... The Io will take your HDMI signal directly from the camera and transcode it to anything. It starts shipping any day now.
    You're a brave soul attempting chroma keys with HDV... they are nigh on impossible to look good. But ProRes will make the rendering times go way down, and give you more real time playback of effects.
    Jerry

  • New iPod 5 gen and apps won't work, and when I take photos in the camera roll they show up when I click the preview in the left bottom corner but not in the photo album in the photos app, frozen a lot and resets it self a lot when it's frozen! Please help

    My brand new iPod touch 5th gen (silver) i use it a lot and I take really great care if it but just today it's been acting really slow, freezing up all the time, it won't let me open up apps, the notification bar (dragged down) all gone (no markets/weather/noticfications) and never says anything, and the camera. Camera is really bugging me, when you go in the app "camera" I tooka photo, and I went to the left bottom corner and clicked that preview, it shows all the photos there, but it won't let you edit them, share or delete them. But when you go into the photos app, and go to camera roll they aren't there at all.
    When I try to open apps, they freeze and then I try to move/delete them and then it freezes, and stops everything. Shuts down, and restarts and like nothing's happened.
    Please, this is my first iPod and I really care about this so so much. Please somebody help me with something!!!! Please!!!!

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    - Reset all settings  Already sugested
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          

  • Final Cut loading and running extremely slow...

    Hi, I posted about this a few days ago but in my usual panic (work to do!) I didn't make it clear, basically, here's the problem...
    I recently had problems with FCP and generally all apps on my machine, when they loaded there was a slight pause when the icon bounced on the dock and I came across all sorts of errors, especially in FCP.
    So, I backed up the two internal hard disks, formatted them both, then Raided them as one and put all the information back from the backup.
    Since then everything's been working fine, I installed a new fresh copy of Final Cut Studio and I've done a few jobs.
    Since finishing my last job last week (which happened to be working with MP4 files, I'm not sure if this is relevant), every time I load FCP now the icon struggles to bounce and it runs extremely slow, even if it's loading a new, blank project. From my last post, someone suggested I delete the render files from the MP4 project, I did so but still no luck.
    I've run Disk Utility, Disk Warrior, no hope.
    All other apps are fine but when I run FCP it slows the whole machine down, takes forever to force quit and restart until it's back to normal.
    Next step is to re-install Final Cut Studio but even if this works, I'd like to have an idea why this has happened??? I've never had problems like this with my mac before.
    Thanks, hope this is clear and not too much!
    Alex

    I recently had problems with FCP and generally all apps on my machine, when they loaded there was
    a slight pause when the icon bounced on the dock and I came across all sorts of errors, especially in
    FCP. So, I backed up the two internal hard disks, formatted them both, then Raided them as one and
    put all the information back from the backup.
    It would have been much better to find the problem than to just move it around.
    All you have done is create a RAID where none was needed. When you moved your clone back to the RAId, you only moved all of the original problems to a new drive.
    You are probably looking at a complete scorched earth-style reformat and reinstallation of everything from scratch since you've done so much damage.
    There were a couple of things to try before you made the RAID but they would have been found by asking some questions and searching in the Mac OS10 forums.
    bogiesan

  • HT201317 Just got a 4S.  We've taken 1,000 photos which are in the camera roll.  Photo Stream has loaded the last half of the 477 pictures.   Not sure what happened to the first 523 pictures.  How do I request that these be uploaded again to Photo Stream?

    I have a 4S and have taken 1,000 photos.  For some reason only the last half of them, 477 pictures, loaded to Photo Stream.  I think I turned off Photo Stream in attempting to set up iCloud.  How do I re-load the first set of 523 photos again to Phot Stream?

    Welcome to the Apple community.
    It is not very easy at all to add photos to photo stream from your camera roll on your phone, the only way I'm aware that this can be achieved is to take a screenshot of each photo. It would be much simpler to sync your photos to a computer and add them to photo stream from there.
    Photostream when enabled will only add photos from the camera roll that were taken post photostream activation.

  • Zen X-Fi2 extremely slow when loading playlists!

    0Zen X-Fi2 extremely slow when loading playlists!?I recently purchased a Zen X-Fi2 64gb. I'd been waiting for a player of this size for a few years now but Creative was behind the power curve so I temporarily switched to an Archos 80gb. After the Archos began to annoy me I ended up just going with the Zen 32gb flash based player. It works/ed great. This new Zen X-Fi2 however is unbearably slow! I don't mind quite sometime to rebuild the library once the initial sync is done but when it takes 5 minutes to load a playlist (3000+ songs) then I get upset. It takes so long to load said playlist that the player shuts off before it has time to load all the songs. I can't even just click play right away like I could on the Zen. The only way I've been able to get around it is to tap the screen twice. Once to load the playlist (which takes forever if it's more than 00 songs) and again to play once the lengthy loading process is over with. However even then it doesn't load all the songs. I've been communicating with tech support about this with no resolution in sight. All they keep telling me is how 'normal' it is for a player to load a large number of songs. My Zen which is an MTP player syncs and plays music much faster! Is there anyway to possibly upgrade this to an MTP player?

    Hi Vokivolli,
    Almost 2 months on from your original post I see that you have received no reply from an administrator. Are these problems still persisting with your player? I have an X-Fi Style too and am experiencing the same problems. Like you I was hoping that firmware updates would address the problem. I don't think that the Style is a priority for Creative and unfortunately I don't see them bothering to solve these issues. Hope I'm wrong cos otherwise I love the X-Fi Style.

  • Photo shows in preview but not in camera roll 5s

    I take a picture with my iphone 5s and I see the photo in the preview.  When I go to click the preview, it goes to my camera roll and I can't see the photo I just took. I do see the previous picture.

    Hi there twinklethumper,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    iCloud: Troubleshooting missing information after restoring an iOS device
    http://support.apple.com/kb/TS4605
    -Griff W.

  • Took photos with iphone 4s. Pic displays in picture preview, but not in camera roll. Any advice? Pic should be on phone somewhere.

    Took photo with iphone 4s. Picture displays in picture preview on bottom left, but is not in camera roll. Pic should be in phone somewhere since it's in preview. Any advice?

    Ok try this kennylebouef,
    Open multitasking by double tapping the home button (at the bottom), a row of apps you've recently used should appear, tap and hold the photos app until it wiggles and displays an x, tap the x to close and then reopen the camera roll app. Let me know if it works. It's odd and frustrating, I know.

Maybe you are looking for