Preview low quality, how do I change the setting?
I am working with Adobe Premiere Pro CS4 with Windows Vista. The preview is showing in low quality. It makes it difficule to judge the quality of the footage. Is there a setting for this. I have looked in the preferences but didn't see anythig helpful.
Well, Jim there have been three users, IIRC, in the last year or so, where Auto performed better than with Highest. For me, Auto and Highest produce no noticeable difference (on my laptop's GeForce 8800m GTX, and do not even know about my Quadro FX-4500, as it's always been on Highest), and I would have assumed that Highest would always be the best - yet for 3 posters, it was not. Three is not a very large number, but if one considers the number of copies of PrPro sold, factor then by the number of people, who post here. Factor again by the number of posters with questions/problems with the quality of the display in Program Monitor. All of a sudden, 3 might take on statistical significance. I do not recall the video card from any of those posts - could have been the same, or more likely different. When I read the first response, that Auto had worked better, I dismissed it. As time went by and at least two others reported the same, I made a mental note of it - in some cases, it appears that Highest is NOT the best, hence my mention to try each and judge. Why would Auto do better than Highest? I have no clue, but would think that it might have something to do with the video card, its driver, or possibly individual settings in the driver's console, or maybe something like Hardware Acceleration in the OS.
So you can question all that you want. It could be that the posters lied, or became confused over which setting worked best for them, yet with 3, it seems a bit of a stretch.
To cover bases, I mentioned trying each to test, so in this case, the OP should be able to make that determination, with very little time lost - click, click, test.
If it's meaningful to you, perhaps spend the weekend pouring over the posts, say back 18 mos. and see exactly what the circumstances were, that yielded better results on Auto.
Happy reading,
Hunt
PS - I know that the threads were here, as PrE does not have a Program Monitor Quality setting - only Magnification
Similar Messages
-
How can i change the setting on my ipad 2? Whenever i read stories in the net after awhile it goeson standby and i have to keep on entering the passcode. Please help.
Settings>General>AutoLock>Never. Now it will not sleep at all so change it back when you are done reading.
-
I accidentally agreed to set up my work laptop icloud account to merge with my other devices and want to keep the work information separate. How can I change the setting for the PC at work?
Sign out of iCloud.
-
I made a big mistake to change the setting of my Mac book pro to "me only". Now ofcourse It cannot open the login page, for how would the mac know it is me? How can I change the setting back to "everyone"? I have back up in the past but the last month I have not. I really want to keep the data.
So how can I go in and change the setting, It stays ofcourse at the apple screen with wheel. All info is there and the computer works fine, just cannot use it or have been able to log in.wjosten is spot on. If you really want iCloud, then you will need to acquire a new or second hand MBP that can run Lion.
Ciao. -
How can I change the setting to one appropriate to java1.2
Hello.
I am using WebLogic 4.5.1 .
and recently started to use JDK 1.2 instead of JDK 1.1.7.
So, I set [start]-[weblogic]-[Choose1.2JRE] in environment.
and then, if I execute T3Server, the message of
"javai.dll class path cannot be found " is displayed and the server is not
loaded.
However, javai.dll was in java1.1.X\bin.
I can assume that a setting is to java1.1.X.
--> How can I change the setting to one appropriate to java 1.2
It's my environment
ClassPath
.;c:\weblogic\classes;C:\weblogic\lib\weblogicaux.jar;C:\weblogic\license;c:
\weblogic;C:\weblogic\myserver\clientclasses;C:\weblogic\myserver\serverclas
ses;C:\weblogic\myserver\servletclasses;C:\weblogic\mssqlserver4\classes;c:\
weblogic\classes\boot;C:\weblogic\eval\cloudscape\lib\cloudscape.jar;c:\rmi-
iiop\lib\iioprt11.jar;c:\rmi-iiop\lib\iioprt.jar;c:\rmi-iiop\lib\rmiorb.jar;
C:\jsdk2.1\runner.jar;C:\jsdk2.1\servlet.jar
Path :
%SystemRoot%\system32;C:\jdk1.3bin;c:\weblogic;c:\weblogic\bin;
c:\;c:\bat;c:\util\;C:\jsdk2.0\bin
Hyung Gi Min -
Question about email setting: how do i change the setting so i need to login to check my email. Currently it automatically come to the inbox without the need to log in.
You don't. Email comes in either by push or when you invoke the email app. Ther is no password except when you first set up the account. If your iPad is not being used as your personal device and you need to shield emails from other users, then don't use the email app. Instead, use web mail if available from your provider.
-
Files that used to be visible are now hidden in Mavericks 10.9.1. How can I change the setting to view the same files as before? I do not need the hidden files that are typically invisible.
I am having trouble locating such files as PDF's INDD, AI etc. When I view all hidden files and try to open it in the program..it looks like it is really not on the drive. Has anyone come across a solution?You may need to rebuild permissions on your user account. To do this,boot to your Recovery partition (holding down the Command and R keys while booting) and open Terminal from the Utilities menu. In Terminal, type: ‘resetpassword’ (without the ’s), hit return, and select the admin user. You are not going to reset your password. Click on the icon for your Macs hard drive at the top. From the drop down below it select the user account which is having issues. At the bottom of the window, you'll see an area labeled Restore Home Directory Permissions and ACLs. Click the reset button there. The process takes a few minutes. When complete, restart.
Repair User Permissions -
How do you change the setting to view the iPhone Horizontally? It is locked in the vertical setting. Thanks
Orientation lock is covered in the manual.
Click Support at the top of this page, then click Manuals -
Firefox keeps my history for too long. how can i change the setting to 2 weeks
<blockquote>Locking duplicate thread.<br>
Please continue here: [[/questions/903677]]</blockquote>
firefox keeps my history for too long. how can i change the setting to 2 weeksDo you mean you have a Macbook Pro (laptop) versus a Mac Pro (desktop)?
You can back up the MBP, restart using Command+R to boot into the Mavericks Recovery HD, erase the Mactintosh HD and Reinstall OS X. Then you can go through setup and configure it with your information and Apple ID. Mavericks should not prompt you for an Apple ID when it goes through the install since that OS is free.
One thing you might want to consider is asking the previous owner to unregister the MBP from his Apple ID if he previously registered it. Then you can register it under your Apple ID.
The previous owner should have wiped it clean and reinstalled the OS that came pre-installed before selling it. -
i don't want my emails deleted on my iphone to be deleted on my desktop. how do i change the set up
You can manually manage or you can sync by playlist/artist/album/genre/checked songs.
Maybe you should read the manual:
iPod touch User Guide (For iOS 5.0 Software) -
I really need help with this cause when im using firefox 3.6 , usually when i want to close the window , they will ask me whether i want to save the tabs or close or cancel.. but im having difficulties with firefox4.
and now i need to type again the last tab page which i went to.its kinda troublesome.
really need help for this.Firefox now always stores the old session, and you can access it by going to the History menu and selecting "Restore Previous Session"
If you want Firefox to display the message to save the session, it can be turned back on by changing some preferences.
# Type '''about:config''' into the location bar and press enter
# Accept the warning message that appears, you will be taken to a list of preferences
# Locate the preference '''browser.tabs.warnOnClose''', if its value is set to '''false''', double-click on it to change its value to '''true'''
# Repeat this for these 3 preferences '''browser.warnOnQuit''', '''browser.warnOnRestart''' and '''browser.showQuitWarning'''
If you always open the last set of tabs, an alternative approach is this:
# Click the orange Firefox button, then select options to open the options window
# Go to the General panel
# Change the setting "When Firefox starts" to "Show my windows and tabs from last time" -
I have two iMacs, an iPhone, and an iPad. All use the same email address but the new iMac would only let me set up the email account as an imap account. On this iMac I can only see three weeks worth of emails. On the other iMac, iPhone, and iPad, this email address is set up as a pop account and I can see emails as far back as three years. I use Yosemite on the new iMac and I cannot find out how to change the settings to let me see more than three weeks worth of emails. This is an att&t email account which is basically a Yahoo account.
Nope. It will reset all settings. For fix errors.
Or you can try Logging out and Restart your iPad and Sign in again. -
How do I change the set up language back to English?
I mistakenly set up Apple TV with French as the language and can't figure out how to change it to English.
Sorry, i'm not good at english.
If your Lightroom is Creative Cloud, you can change the language.
Step1. Change language setting in Creative Cloud Desktop Application.
Adjust the install language | CCM
アプリケーションの言語を指定してインストールする方法（Creative Cloud）
※Please see screenshot.
Step2. Delete Lightroom.
Step3. Restart your computer.
Step4. Reinstall Lightroom from Creative Cloud Desktop Application. -
There is a dialog box that appears when I click on an email attachment that asks whether to open or save a .pdf document, and whether I always want that action to be taken. However, when clicking a .doc or .docx document, I no longer have the choice. How can I revive the dialog box to choose to 'open' the file rather than being forced to 'save' the file?
Try to clear the cache.
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
See also:
* http://kb.mozillazine.org/File_types_and_download_actions
You can rename such files with a .html file extension and give them a .jpg file extension to make applications see them as an image.<br />
If Windows is stubborn and keeps the .html file extension and you end up with image.jpg.html then add quotes around the name ("image.jpg") -
How can i change the setting on a mac from someone i bought a Mac pro from to mine?
I recently bought a Mac Pro from a friend of mine who's used t for some months. I want to change the System name and other settings such as app Store, calendars etc to my own profile as i still see his name come up all the time. i cannot update Apps on the store as it keeps asking me for his password.
please help!Do you mean you have a Macbook Pro (laptop) versus a Mac Pro (desktop)?
You can back up the MBP, restart using Command+R to boot into the Mavericks Recovery HD, erase the Mactintosh HD and Reinstall OS X. Then you can go through setup and configure it with your information and Apple ID. Mavericks should not prompt you for an Apple ID when it goes through the install since that OS is free.
One thing you might want to consider is asking the previous owner to unregister the MBP from his Apple ID if he previously registered it. Then you can register it under your Apple ID.
The previous owner should have wiped it clean and reinstalled the OS that came pre-installed before selling it.
Maybe you are looking for
-
No aggragation when combining reports
Hello all, I combined 2 reports with each other in answers. The first one is a dim with 2 different fact values from 2 different fact tables and the second one is the dimension with a 2 columns with null values Now I got something like: A -1 - 1 A -
-
Permission problem while invoke process in flex application
How can we allow every user that login to flex client that has permission to call the process in workbench? Current I had an application that invoke the process by using remote object. But the process can only be able to invoke for the users that c
-
Router is WRT54GS. Network status is "OK" and secure. SSID is correct. EasyLink Advisor says I have no internet. I have it on my PC and the router is sending to the laptop, so I think I have internet. Tried to download firmware, but it said the
-
Multiproviders and filter on time
Hi I have a query on a multiprovider. The multiprovider is made up of a cube and a characteristic. The query should return all my customers even though they did not do any purchases (therefore not in the cube) in the spesified time period. I followed
-
Hi All, I need Supply and Demand Query in a single SQL. I have a requirement to put the Supply and Demand in a single reporting structure for a particular org/item/product line. I have the supply and Demand Queries seperately, but iam not able to joi