Preview mode showing some elements shifted vertical ;(

One of my pages if showing some elements shifted vertically when viewing in preview mode. Its rather annoying as only one page is showing this. The design section shows all elements as they should be. Please help!!
Image showing design mode as intended with Event title bar and featured events image in correct place.
Preview mode below showing feature event image shifted vertically with event title bar.
Any helpers got a fix for this?

I also have a similar issue with a page on my site.
I have a vertical scroll page with anchored links on the page.
Each section of the page I have denoted by a vertical solid color rectangular bar.
In design mode these bars are the correct lenght and position, however in preview I had issues where they were either shifting vertically or after trying out some fixes, which I will list, they now start (I think) at their designated start points but their end point is not that which i have specified.
Fixes I tried:
I put the anchors at numbers below 0 - no change
I changed from one continous text box to segmenting the text boxes into section which correspond to the different colored rectangular bars - this, once grouped with corresponding bar and text box, solved the issue of the bars starting in the wrong location but did not fix their their over run at the end as in picture.
I then put the grouped bars inside their respective text box and wrapped text with a margin of 20 - no change
I then grouped all simialr grouped items together - no change
I would greatly appreciate your help and I will forward the site with a link to this thread to muse support.
yours faithfully.

Similar Messages

  • Excel spreadsheet being opened in preview mode by some machines

    I would really appreciate it if someone could help with a problem that is confusing me.
    I am developing an Excel spreadsheet containing a number of macros that are actioned mainly through the use of an ADD-INS customised menu.
    The spreadsheet has been deployed across about twenty systems running a mixture of mainly windows 7 64 bit machines with Office 2010 or 2013 installed.
    For several weeks each spreadsheet has been updated periodically as new functionality has been added. This has not been a problem until now.
    Some, but not all, when they try and open the new version of the spreadsheet get an error 'Application-defined or object-defined error' a number of machines experienced this same problem all at the same time, but not all.
    I have ruled out it being an Office version number problem because in both 2010 and 2013, some work some don't.
    I can reproduce the exact same problem on the machines that don't have the problem by opening the spreadsheet in preview mode.
    I can find nothing that is forcing the problem machines to open the spreadsheet in preview mode and the difference between the previous version of the spreadsheet and the latest version are relatively minor, but the previous version works and the latest version
    causes some machines to throw an error.
    The section of code that is being highlighted is checking the sheet protection, I have isolated the code and inserted it into a test excel file and it works fine on the machines that are experiencing the problem, so it doesn't seem to be a coding problem.
    I feel that I have effectively ruled out any problem with the code itself and so instead concentrated on it being a "preview" mode problem.
    I found that if I opened the new version up on the problem machine and applied a self digital certificate to the VBA code and saved it locally then I could get the problem machine to open the new version without an error.
    I can't see any need for doing this though, there is no digital certificate on the original spreadsheet and when I isolated the highlighted code I was able to create a spreadsheet on the same development machine and send it over to a 'problem' machine and that
    spreadsheet opened and ran just fine.
    I am therefore now very confused. This latest version of the spreadsheet is being opened by let's say 50% of the machines in what appears to be preview mode. The machines are all part of the same network and I have checked that they all have the latest Windows
    updates applied and all have the same Excel options settings.  
    I have checked the security levels and all the machines seem to be set up the same.
    I have doubled checked and there is no digital certificate on the original spreadsheet.
    I need it to work the way it did before, i.e. each computer receives a new version and can open it without any messing around.
    The new version is copied from a networked folder so I have been able to rule out any Outlook security messages to do with email attachments.
    Can anyone shed any light as to what could be going on? 
    Why are some machines opening this particular spreadsheet up differently to every other spreadsheet?
    As it suddenly happened across multiple machines at the same time I was looking at possible Windows updates causing the problem but I have applied all the window updates to two machines and one works and the other doesn't.
    I'm running out of ideas.

    Hi Jeffrey
    >> Excel spreadsheet being opened in preview mode by some machines
    >>>Is it caused by the custom code, could you reproduce this issue without the custom code?
    I can't seem to isolate the code to cause the problem, when I isolate the code it works.
    >> New version of the spreadsheet get an error 'Application-defined or object-defined error' a number of machines experienced this same problem all at the same time
    I>>>’m not sure whether it was caused by Microsoft Security Bulletin MS14-082.
    >>>Here is a KB for your reference: KB3025036
    I have had this problem but managed to resolve that by deleting the .exd files.
    >> However it is still a problem for the first machine that experienced the problem, even though the Windows Updates are wholly up to date.
    >>>Currently, I’m not able to identify the root cause of this issue, but if this issue could only be reproduced on a specific machine, I will suspect this issue is related to a specific environment. If this is an urgent issue, I will recommend you
    creating a support incident so that the engineers could work closely with you to troubleshoot this issue in a deep level, if the support engineer determines that the issue is the result of a bug the service request will be a no-charge case and you won't be
    charged.
    I have now installed the same spreadsheet on 20 machines.  
    15 - installed without any problem,
    3 - experienced the problem but then mysteriously worked a few days later without me doing anything other than trying again.
    1 - worked only after I digitally certified the VBA on the local machine,
    1  - I can't get it to work at all no matter what I do. (Edit the VBA locally, digitally certify the code etc)
    I have another 4 machines that need to be done.
    For the 1 that I can not get to work at all I have checked that all the windows Updates have been applied. It is a relatively new desktop PC running Windows 7 64 bit and Office 2013.
    Does any of that suggest a possible cause? To me it almost suggest a windows update is resolving the problem but if it is it is proving difficult to pin down as to which one.
    Martin

  • Preview not showing some text in certain PDFs

    I've had issues with a couple of PDFs this year that did not display correctly in Preview, but are viewable in Acrobat Reader. An example is here on pages 31-36. Preview shows blank gridlines, but Acrobat Reader shows text and numeric data in those cells. It appears Adobe may have enabled some kind of text flag that Preview is ignoring in one of their authoring programs?

    An example is [here|http://www.fs.usda.gov/Internet/FSE_DOCUMENTS/stelprdb5227378.pdf] on pages 31-36. Preview shows blank gridlines,
    I tried downloading the pdf file at that link, and in my system Preview displays those pages properly:
    You might try running the [OS X v10.6.6 combo update|http://support.apple.com/kb/DL1349] - it contains some updated Preview components which might include something that is currently missing in your system.

  • Preview Mode shows different page than design mode

    When I am editing my page in Design mode in Muse CC, the page is approximately 700px long. When I preview that same page within Muse, it adds about 300px to the bottom of the page. There are no text boxes or other content that is causing the shift? Why are my webpages appearing different in the Preview panel than in my Design panel?

    Please send your .muse file to [email protected] with subject marked Att:Vikas.
    Thanks,
    Vikas

  • MTS file preview not showing in Elements 8

    I am trying to use Premiere 8 to edit my AVCHD files from a Panasonic camcorder.  The files are MTS format and in Windows 7 explorer the file icons show a preview of the first frame as you would normally expect.
    However in Premiere 8 organiser the preview does not show and all the files show a generic "filmstrip" icon so there is no way of identifying which clip is which.
    If I drag one of these files into Premiere 8 editor,  the first frames show up normally in Sceneline and it appears to be possible to edit the files OK.
    Is this normal behaviour for Premiere 8?  I have to say I am not too impressed with Premiere (which I have only had for a few days) as it keeps hanging my laptop  (core i7 4GB ram Windows 7 64 bit)
    Any sugggestions anyone?
    Peter

    I have just found a work-around to my own problem.
    If I select all (CTR-A) then R-click and choose "update" it then shows all the previews.
    Wierd!
    Peter

  • Iexplorer Print Preview mode

    Hi!
    In Print Preview mode page looks different. In this mode missing some elements as header line and some lines of table. I find out that in Print Preview mode some attributes of element TD not rendered. In this case background-color style attribute is not rendered.
    How can i avoid this problem?

    Hi kaspers,
    I have the same problem you seem to have had. I am using background colour to denote weekends and bank holidays on a calendar screen and the users want to be able to print the data using IE File -> Print option. However, the background is not displayed on the printed copy (or using Print -> Preview). Did you manage to resolve this or find a workaround?
    Regards
    Keith

  • Preview Mode Thumbnails showing up Blank

    PLEASE HELP.
    Some thumbnails of pages in Preview Mode are showing up as blank.
    I have tried...
    1. Restarting Muse
    2. Re-Opening the document
    3. Turning thumbnails on/off in Preview Mode
    4. Opening those specific pages, making edits, then closing them
    None of the above has fixed this issue.
    See attached screenshot:
    I am on Mac OSX 10.7.3 w/ 8GB RAM
    Adobe Muse v1.0 Build 948, CL 767416
    Is this a memory / cache issue?  Please advise as I can upgrade my memory and continue working if this is the issue.
    Is this a Muse bug?  Please advise so I can stop searching for solutions and wait for a fix.

    Thank you Zac, very much.
    I was able to fix the entire .muse document by recreating my masters and individually going into each page and shifting the page content from -7500 y axis back to the position they should be at.  It was tedious but I am now progressive.
    Unfortunately each master had a header line that was already at its top most position 0px.  Messing with these did not fix any of the thumbnails.
    Appreciating the feedback - I represent a team of 6 who will be subscribing to Muse very soon for professional production.

  • Elements in Design Mode and Preview Mode are Different

    I've encountered an irritating problem in Muse. The elements arranged in design mode are shifting erratically in preview mode. I'm trying to set up "buy" links for my client's CDs using amazon, cdbaby, itunes icons. The buy buttons are place below the audio player widget from MuseGrid. Right now they are just pics - no hyperlinks attributed. If anyone has advice, I'd be grateful as this problem is driving me nuts and costing me hours!!! I am using the
    Design Mode                                                                                                Preview Mode

    Hi,
    Please try grouping the objects on the page. It resolved such issues in most cases.
    Regards,
    Aish

  • Type shift between design mode and preview mode in Muse.

    My type shifts / moves positions between design and preview modes. It then justifies differently in differnet Web Browsers. This mean I end up positioning things incorrectly in design mode to accommodate the error when published. I am using the Droid Sans Websafe font from Typekit but it doesn't seem to matter which font is used as the bug still occurs. See the attached images; the left is in Design and the other in Preview. See how the formatting shifts within the software. Also the weight of the headline FORDNESS changes slighlty. On other pages, this headline shifts a few pixels across and down. Any suggestions?

    Hi,
    Text layout and rendering varies from browser-to-browser (and between Muse Design and Preview modes). This may come as a suprise if you have a Print background, but is the reality of the web medium. I'll point you to some previous forum posts that may be instructive.
    Layout shifts because of line-break changes
    http://forums.adobe.com/message/6032336#6032336
    Layout shifts because of font metrics
    http://forums.adobe.com/message/6045303#6045303
    Text rendering differences (general)
    http://forums.adobe.com/message/4778838#4778838
    Text thickening (specific to Safari)
    http://forums.adobe.com/message/5862858#5862858
    Hope this helps.
    Abhishek

  • Managed Metadata Fields not showing up in preview mode

    0down
    votefavorite
    In our SharePoint 2013 Publishing page, managed metadata fields doesn't show in preview, they show up only in edit mode or after we publish page.
    Is this bug?
    Thanks in advance.

    Hi,
    According to your post, my understanding is that the managed metadata fields not display in preview.
    I tried to reproduce the issue, the managed metadata fields worked well in my environment.
    I create a publishing page, add a library web part which contained managed metadata columns.
    Then click the preview option in the ribbon, the managed metadata columns worked well.
    Did the issue occur in other publishing pages? You can create a new publishing page to check whether it works.
    Did you use the compatibility mode or add the site into trusted sites?
    You can use compatibility mode to check whether it works.
    Open IE->Tools->Compatibility View Settings
    You can also add the site into Trusted sites.
    Open the IE->Internet Options->Security->Sites->add the site into the Websites, then check whether it works.
    What's more, you can use other browsers to check whether it works, such as Firefox, Chrome.
    Thanks & Regards,
    Jason
    Jason Guo
    TechNet Community Support

  • Acrobat Preview mode doesn't show PMS spot colors

    Out of the blue, the preview mode in Acrobat 9 is showing PMS spot colors as black, CMYK colors show up fine. The actual pdf itself is fine. This happens when I make pdfs "High Quality" or "Press Quality" from Indesign 6. Curiously, it does not happen when I make a "Smallest File". However when I attach these pdfs to email, the spot colors appear black.
    I've been using 9 for a long time and I've been using Indesign 6 for a few months now. I'm on a Mac Pro, OSX 10.6.8. I can't figure out if there is something that was unchecked or checked that is causing this problem to come up seemingly out of nowhere.
    Any advice is much appreciated,
    Thanks!

    It was correct for Adobe to use the Lab alternate color space for display of Pantone spot colors. Why? Two reasons:
    (1)     InDesign and Illustrator are now consistent with Photoshop's behaviour with non-process color channels. This interoperability issue has been complained about for years.
    (2)     When one referred to the CMYK alternate color space values of Pantone colors, the question naturally comes up as to which CMYK color space those deviceCMYK values represent. Are those values for SWOP or Gracol or what? According to what Pantone told me personally years ago, they were SWOP, but not so-labelled. Thus, unless your output CMYK color space is SWOP, use of those CMYK colors is simply wrong!!! Using Lab alternate colors will allow whatever renders those spot colors in either RGB or CMYK to properly render them in the actual final color space!
    Unfortunately, there is nothing that Adobe can do to cause Apple's preview product to properly display these colors. By the way, this problem also afflicts the built-in PDF viewer in the iOS products as well as MacOS X. Fortunately, under MacOS, you can easily download and install the free Adobe Reader and have it do all the PDF display in lieu of Apple's preview. Although we do have Adobe Reader available for iOS, Apple does not let us replace preview in iOS for PDF preview. You must view in preview and send the file to Adobe Reader.
    Of course, if enough Apple users complained to Apple management about the numerous anomalies of its preview program, maybe after all these years, they might actually fix it to properly handle Lab colors (as well as transparency).
              - Dov

  • Need to show some fields in display mode

    Hi, i need to show some fields in display mode for VA02 transaction code( is to change the values) for some particular users. so do we have any user exits for this requirement?
    Please answer me. its very urgent.. thanks in advance. 
    ex: payment terms and freight terms.

    you can try this for header level data
    MV45AFZZ exit ""USEREXIT_FIELD_MODIFICATION"
    code would be like below
       CASE screen-name.
    To suppress  Pricing total and Cuurency field at header
          WHEN 'VBAK-NETWR'.
    *YOU CAN ADD YOUR CONDITION HERE WHICH IF SATISFY THEN *EXECUTE NEXT  LINE OR SKIP IT   
          screen-INPUT = 0.
          WHEN 'VBAK-WAERK'.
              screen-INPUT = 0
        ENDCASE.
    but it depend upon what data AND in which tab you want to hide, like is it at header level or at item level or pricing (HEADER OR ITEM) data each of them have different exit to restrict data modification.
    ENJOY SAP.

  • How to draw vertical lines that are visible in preview mode?

    Hi all,
    I need to draw vertical lines on a document. The lines must be same as we draw using line tool.
    I could draw the line using CreateLineSpline() method of IPathUtils.
    The problem is that these lines are not visible in preview mode. Please tell how can we make lines that are visible in preview mode.
    Please help, I'm running out of time.

    CodeSnippetRunner has the answer:
    Utils<IPathUtils>()->CreateLineSpline

  • Correctly Hide Edit Mode Elements in Preview Mode

    Hello,
    I wanted to know how I should modify the code below to correctly show content in the correct mode?  The code below works, but when switching to preview mode, I have to manually refresh the page to get the "Preview/Publish mode text" to disappear.  I'm aware I could modify the sidekick to force a refresh, but I'd prefer to do it similarly to how CQ does it (eliminate all edit mode components immediately without refreshing the page).  Thoughts?
    import="com.day.cq.wcm.api.WCMMode"
    <% 
        if ((WCMMode.fromRequest(request) == WCMMode.EDIT) || (WCMMode.fromRequest(request) == WCMMode.DESIGN)) {   
            %><div>Edit mode only text</div><%
        } else {
            %><div>Preview/Publish mode text</div><%
    %>

    Hi,
    As the above code is evaluated server side and edit/preview is triggered client side this approach will not work for you.
    You could use the fact that CQ is adding "cq-wcm-edit" class to page body in edit mode and "cq-wcm-preview" in preview and hide your divs by CSS.
    Br

  • I changed my browser fill and the update does not show in the preview mode

    I changed my browser fill and the update does not show in the preview mode. I saved and restarted muse but the problem is still there. Any thing else I can do? Could it be something that changed in the file?

    Hello,
    What did you put in the "browser fill" area, an image or a color? WIth gradient or with solid color? Also, does it show fine if you "Preview in Browser"?
    Screenshots showing the Browser fill section (like this: http://screencast.com/t/RHqdVPP4) and the display in Preview mode would also be helpful.
    Cheers
    Parikshit

Maybe you are looking for