Preview Monitor and Exporting Quality Issues

Hello, in a previous life I was a video editor from the world of Avid and I just picked up Premiere for an emergency side mission at my current place of employment and I have run into a couple issues with CS4.
1. The preview monitor for the Sequence displays a lower quality of the video that comes from the uploaded Clip and it also does not play back at a steady frame rate. However, when I look at the Clip in the secondary preview monitor that is reserved for clips, titles, etc, the video quality is as high as what is expected. How do get the sequence monitor to playback at the quality the clips are uploaded as and how do I get the playback to do so at a steady 30fps?
2. My exporting experience was based around dubbing directly to Beta tapes and I never really had to do any digital file exporting. I need some tips on what to export a Sequence as that will retain a high amount of the quality while also keeping the file size to what will fit on a disk. The video length in this case would never be more than 5 minutes as I am only working on sales videos. Also, the file needs to be playable in Windows Media Player.
Thank you in advance for any help on these issues.

Please provide
these details to help us help you.
Cheers
Eddie
PremiereProPedia   (
RSS feed)
- Over 300 frequently answered questions
- Over 250 free tutorials
- Maintained by editors like
you
Forum FAQ

Similar Messages

  • What happened to PDF document 22040 – "PIX/ASA: Monitor and Troubleshoot Performance Issues"?

    Hi, does anyone knows what was happened to the following PDF notes in Cisco? The PDF file is only contains 1 page compared to the original notes in html format which is about a few pages.
    If there is alternative link for this document, please let me know. Thanks.
    Document ID: 22040
    PIX/ASA: Monitor and Troubleshoot Performance Issues
    http://www.cisco.com/image/gif/paws/22040/pixperformance.pdf <PDF Notes, but 1 page only?>
    http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a008009491c.shtml  < HTML Notes>

    Hi experts / marcin
    can anyone of you let me know about my question related to vpn ?
    Jayesh

  • My workaround to solve flickering issues on Program Monitor and Exported files

    Hello guys,
    I am working with a combo of this effects: Fast Color Corrector, Three Way Color Corrector, Warp Stablizer, MB Cosmo and Neat plugin. Editing 1080p24 .MOV files from GH4 and GH3. WIN 8.1, PP 8.0.1, i7 3770K, 16G and a old GF250. After dozen tests... exporting, reinstalling, converting... I found a workaround to solve the flicker issue in Premiere.
    When the playback is set to Mercury Playback Engine Software Only, the issues occurs randomly only with clips that have video effect.
    So, I set back to the Mercury Playback Engine GPU Acceleration (CUDA) and the issue happens only in clips with Warp Stabilizer effect. In these clips, I replace for AE comps and stablize inside AE.
    Hope this helps some one. Sorry for the english. Cheers from Brazil.

    Ann Bens escreveu:
    What if you nest the clips with effects first and then apply the warp?
    The error still happens.
    Let me explain somethings... in these clips with Warp Stabilizer effect, the bar render is Yellow but the image freezes with Mercury Playback Aceleration. I think my GPU cant render this. If I try to export, the message error is a generic "Error compiling movie. Unknow error". So, I  tried to put any Distort video effect, the bar render now is Red, and I can playback and export, but the flicker issue occurs.
    Hope these infos help.
    Reggards
    Diego

  • Preview Pane and broken link issues in CS2 for Mac.  Please help!

    I posted this a few days ago - but would love to have some insight on how we can resolve this issue
    When I am working on html documents, both old and new, I have lost all of the 'preview pane' buttons.
    I can still see and have access to the layout and source panes, but the two preview (pdf and regular) are missing.
    In the body of the editor all of the images that were there now show just a broken link image (but when you save and go to view the file in a browser all changes and updates are there.  The source shows all of the right info and links
    Also when you place a new image - the image icon doesn't show the image or even change to the proper size that the image is.  You have to do that manually and then still only shows a broken icon in the new size.
    Has anyone seen this before?  Did I accidentally altered a mode in GoLive....is there a way to fix it? 
    Thanks!!!

    When you have ADE (digital editions) open with  "bookshelves" page with a "Getting Started with Adobe Digital Editions" booklet in it,
    enter cmd-shift-U, or menu/Help/Authorize Computer.
    That will ask for your Adobe ID and password and authorize the computer.
    Once that has been done you shouldn't need to do it again.
    Sometimes you do need to if things go wrong, but you certainly shouldn't have to do it at all regularly.
    When that has been done, plug in the Kobo; it should show up in the left pane of ADE.
    Use "menu/Help/Authorize Device" and that will authorize your Kobo with the Adobe ID from the Mac.
    You can then copy books by drag-dropping onto the Kobo within ADE

  • SQL Server Import and Export Wizard Issue

    i am trying to export SQL data into excel to send out weekly reports.  I have created a view and a SQL account has access to this view; however, I am unable to successfully export the data.  In preview I see all of the data yet it fails on the
    Pre-execute with the below.  It creates the excel file with just the header.  I am using SQL 2014 and loaded the 64 bit AccessDatabaseengine.  I am selecting excel 2007.  Any ideas welcome.
    Messages
    Error 0xc0202009: Data Flow Task 1: SSIS Error Code DTS_E_OLEDBERROR.  An OLE DB error has occurred. Error code: 0x80040E37.
     (SQL Server Import and Export Wizard)
    Error 0xc02020e8: Data Flow Task 1: Opening a rowset for "WeeklyList" failed. Check that the object exists in the database.
     (SQL Server Import and Export Wizard)
    Error 0xc004701a: Data Flow Task 1: Destination - WeeklyList failed the pre-execute phase and returned error code 0xC02020E8.
     (SQL Server Import and Export Wizard)

    Hi astro,
    Please ensure that you haven’t renamed or moved the destination excel file during the exporting process. Also make sure that “Create destination table” option is checked as below screenshot and the SQL statement is correct.
    For more details about using SQL Server Import/Export Wizard to export data from a SQL Server database to an Excel spreadsheet, please review the below blog.
    http://www.mssqltips.com/sqlservertutorial/202/simple-way-to-export-data-from-sql-server/
    Thanks,
    Lydia Zhang
    If you have any feedback on our support, please click
    here.
    Lydia Zhang
    TechNet Community Support

  • Exporting Quality Issue

    I've read on here that I should export using the Export To Quicktime option if planning to burn to DVD. But Exporting To Quicktime gives a really bad final quality. I get much better quality by using the Quicktime Conversion mode. But, of course, it takes a lot longer. Is something not set up correctly for me to get inferior quality by exporting to quicktime?
    I'm using FCE 4.

    Give exact details of the format of the video and also exactly how you are capturing it, editing and exporting to QT.
    Is it HDV, DV, AVCHD or something else?
    What do you mean by bad quality? ...... Blurred, grainy, juddering etc.?
    Message was edited by: Ian R. Brown

  • Lightroom and preview cache and other related issues.

    So I went to open up LR on Friday afternoon (1/30/15) and it wouldn't open. I can't think of anything I had done differently to it, nothing new with my computer. But when I clicked to open it, I got a screen that read, "The Lightroom catalog named 'Lightroom 5 Catalog' cannot be opened because another application already has it opened." I sought some outside advice. I made sure there was nothing even open in the task manager (after having already shut down and re-booted my computer a couple of times) and then opened my most recent backup catalog. I also deleted the "lock" file.
    I was then able to import new photos to LR, but noticed that one folder was missing--the one from 1/29/15. That is likely the last folder I was working in before this whole mess started. After doing some clicking, I could see that those pictures were still in a catalog and on my hard drive, but I could not open a catalog with them in it. If I tried, I got a screen that read, "Lightroom encountered an error when reading from its preview cache and needs to quit."  On the advice of a computer guy and with the reassurance that I can always restore if necessary, who told me to delete the preview cache file. I thought that's what I did, but now I'm not sure. I deleted a huge file folder entitled "Lightroom 5 Catalog previews.lrdata.  This did allow me to open LR, but I had a few days' worth of missing folders and decided to restore what I had just done and seek advice again. Now I'm being asked this if I want to merge the deleted folder with a previews folder from 8/23/13.
    Do I want to merge these? The August 2013 date is about the time I purchased LR. I have done nothing since seeing this.  So I first ask if I should merge these and restore the files OR just keep the deleted previews folder in the recycle bin, then have LR find the missing folders.  And secondly, what the heck happened to make this happen in the first place?  Any help is greatly appreciated.  Thank you!

    Thank you for your reply.  Very simple and helpful!
    However, I am now a bit lost as my catalog is messed up.  I am missing folders in the catalog that I have open.  When I helped LR find them on my hard drive, I got a popup question that read, "The selected folder or one of its subfolders is already in Lightroom.  Do you want to combine these folders.  I clicked "Merge" and then the folder completely disappeared from the list of folders.  I still see it in the correct place on my hard drive, but I can't get to it from LR now.  I assume those missing folders (and another folder full of pics I imported but now don't see listed in the catalog) are in another catalog as I think I have been working with the backup catalog that I opened at the beginning of this whole mess.  Can you help me get everything current and in one catalog again?  Thank you.

  • Lightroom's Slideshow Module export quality issue

    When I export a slide show, the resulting quality of the photos in the pdf is much below that of the photos I see in the Library module. There is a high degree of aliasing (jagged edges) and if I export the slide show at less than 100% quality or at a screen size smaller than my client's, the pixelization renders the slide show useless.
    I am using a Mac with the latest OS with a 256mb video card, 2GB RAM, and plenty of harddrive space.
    I have confirmed with two other experienced photographers that this is also happening with them.
    I have resorted to using Fotomagico as a slideshow software vs. Lightroom for the results from Lightroom are too unprofessional to show my clients.

    Pat,
    I just checked my slideshow output and it looks good. I can only suggest [and you probably have tried all of these: 1] Make sure your photos look good to start, high res etc. 2] make sure you have the latest Adobe Acrobat Reader [8 I believe] 3] restart LR [I hesitate to even say this]
    Beyond that I don't have much to offer.
    Good luck
    Mel

  • Iphoto export quality issues

    I notice when I'm working in iphoto lately. When I export photos, no matter how I do it the photos come out with much lower quality as what they are in iphoto.
    Example
    http://i.imgur.com/XD2Ey.jpg
    Photo on the left is the original. The photo in the middle is my work in iphoto and the photo on the right is what is exported.
    I never use to have this problem... Anyone with an idea?
    Thank you

    The orig. file on the left is RAW.
    I've just done some editing in the adjust section to the photo (The pic in the middle of the example above) to how I want it.
    Export the photo Max quality, full size.
    The exported photo looks like much of the agustments I've done in iphoto are missing (eg:Sharpness & Definition).
    I just want my photos exported to match what they look like in iphoto with my adjusments.
    Thank you for your help

  • Export quality issues

    When I export from Lightroom 4 my image quality changes dramatically between the Lightroom image and the exported image. I have my export settings at 1500x1500 and 240 pixels per inch. Any ideas on how I can keep the exported image the same as the one in lightroom

    I don't know if you can see the difference between the two, where I really saw it was when I opened the exported image on a larger PC screen. I do my editing on a Mac screen, but when I opened the picture on the larger screen it was very grainy in the front person's face and you could see where I used the brush around his head, which you can't see in either of these images. Here are my other settings

  • CS3 - Import and Export Quality Problems with Canon S90 .mov files

    Hi Folks,
    I have spent several hours searching with no results in the forums, and I am a beginner with Premiere, so I apologize for any annoying questions I may post.
    Here is the problem I am having.  The very first step!  Go figure.
    I have videos taken with a Canon S90 point and and shoot camera, in .mov format, 640x480, 30 frames per second.
    When I play these videos in Quick Time or Windows Media Player they look great.  Very sharp and smooth video.
    When I import these videos into Premiere Pro CS3 - and don't do anything to them besides play them in either the source window or or Program window, the quality is much lower.  They are not sharp, and have an unusual texture, almost like there is a tiny bit of water on the lens distorting the view as it moves.
    I imported the video under the DV-NTSC Standard 48kHZ preset.  I have the most updated Quick Time.
    I also attempted to improve the view settings to their maximum with no results.  I also exported the video to see if it was just the viewing, but the exported video is even worse.  Very low quality and not sharp.
    Thanks for any suggestions on the correct settings to import these videos without loosing quality.

    Well, I have read and understand the Codec aspect a bit.  I have discovered that my
    files are avc1 H.264 Codec.  Doing more research it appears that CS3 Premiere Pro has some trouble editing H.264 files.
    So from what I gather so far, it looks like my best bet would be to convert the file into another format that is easier to edit by Premiere.
    Is that correct?
    If so, I am still unsure what to convert it to.
    What is the program that is best to use to convert with?
    Thanks again for your help.

  • HDMI TV launcher and Camera quality issue after update to android 4.0.4

    Hello ,
    I've bought a Xperia S LT26i with android 2.3.7 ,all went ok ,camera worked ok ,HDMI and tv launcher no issue.
    After i've made a OTA upgrade to Android 4.0.4  6.1.A.2.55.
    Now after this update ,TV Launcher over HDMI does not work anymore and all potos from camera dooring day time or night have lots of noise.
    Also in video mode ,is the same ,using any kind of settings from camera ,dose not doo any kind of noise reduction.
    Any idea how i can fix this maybe ?

    I suggest that you try to run a software reinstall using SUS.
    http://www.sonymobile.com/gb/tools/update-service/
    If the problem still remains you should contact your local support team, to have the phone examined and fixed at an repair center.
    http://www.sonymobile.com/global-en/support/contact-us/contact-info/
     - Community Manager Sony Xperia Support Forum
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • Error in Preview Window and exported project/film

    Hi!
    Everything is fine in the canvas window of my Motion1, but the project windows showing up all destroyed, also the exported clip.
    It has nothing to do with my files. Even when I open a layout from motion, in the project window, each little file shows up destroyed. But not in the canvas, where everything is fine.
    I reinstalled the quicktime related .pkg files and motion. Running a ati radeon 9800, which I guess might be damaged, or does anybody has another idea?
    -Tom

    don't have any suggestions, but sounds similar to my problem...
    http://discussions.apple.com/thread.jspa?threadID=347680&tstart=30
    meanwhile after reinstalling motion I cannot do the motion update...... an error occurs...
    I think there might be some 10.4.4/motion conflicts on my powerbook...

  • Jumpy preview, render and export why? (Premiere Pro CS3)

    Hi guys, When I try to import a small video that I took in my Sony CyberShot Camera DSC-S600 (in avicodec) it says my video is:
    MPG1 = MPEG1 (VCD).
    Resolution = 640 x 480 25fps.
    If I just import that video, drag it to the timeline (below), and press ENTER, It will start rendering it without any effect that I've made, and in the playback it will like jump some frames in and out (some in reverse and then forward).
    Also If i just import the video and make a playback, it will do the same, if I playback the video outside the premiere pro cs3 it will run just fine as it should be.
    My computer is a A64 3800+ 4GB RAM DDR2 800mhz, GF7600 gt 256mb is my video card.
    (the video I'm importing is only 16mb).
    Part of the video can be located in youtube, (see link).
    http://www.youtube.com/watch?v=-_73D3Rdbqk
    It was saved in avi, then uploaded to youtube.
    please help me.

    > "...much anything that "also does" video really isn't the right tool for the job..."
    If the camera video can be converted to Pro video, then it can be considered "the right tool." Jim, there are a plethora of situations where a compact still camera that shoots video is the right tool. It's your subjective definition of "the right tool" that begs up on an old paradigm. A fictional character, McGyver, never seemed to have the right tool for the job. In fact, the entire idea of invention is to create
    i or adapt
    the right tool for the job.
    That the misinformed come here with questions does not relate. Many more are informed, take the appropriate steps and proceed to tell the story. And move people. Or get paid.
    For example: I use a still camera that also shoots video as a tennis instruction tool: A one hour tennis lesson involves recording the various tennis strokes, performing a few quick edits, and placing the results on DVD for the student(s). According to you, I should bring a tripod, a bulky mini-dv video camera, etc. I should take the time to set up the equipment, before my students arrive. I should also take time to move the tripod to capture the various different angles. After the lesson, I should take time (excuse me, real-time) to capture the mini-dv into Ppro and edit.
    To me, the video camera is the wrong tool for this job. Instead, I whip out the still camera that also shoots video, walk around to get the angles, shoot the specific strokes requested. Oh-and as a perk, I can take several high resolution still photographs, with a single knob turn. Back in the studio, I dump the clip files on the timeline, w/o real time capture. And I edit.
    Students love the video (they don't care/can't tell about the reduced quality--they're interested in their strokes), and they
    i also
    appreciate the stills.
    If I were doing documentary or broadcast, a still camera that also shoots video would be a poor choice indeed. But, here, I'd be stupid to bring both kinds of cameras. However, before the CEs intervened and created just the right tool, I had to bring both. And I hated it.
    It's a paradigm shift, Jim. You might not be able to understand it if you suffer from perceptualsclerosis.
    And now the CEs have my mouth watering, with EX-F1. Blur the line.
    Keep Smiling

  • Huge Network and Voice quality issues with Xperia T2 Ultra Dual

    Same problem here after one month.
    Voice cracking can't hear other party while having full signal strength.

    Hi @Mayur9 Go to Call settings -> General -> and disable the "Slow talk option" if it is enabled. If the issue persists, boot your device in Safe mode to check what happens: http://talk.sonymobile.com/t5/FAQ/How-to-boot-your-phone-into-safe-mode/m-p/348008#U348008 Also I suggest you to first run a backup of the device information like this: http://talk.sonymobile.com/t5/FAQ/Backup-amp-Transfer/m-p/407253#U407253 Try performing a system repair using PC Companion: http://support.sonymobile.com/gb/tools/pc-companion/ This will factory reset your phone and erase all data. You might need tocharge your device for about 1-2 hours before so the device has at least 80% battery. Make sure the device is not connected to computer or laptop and turned off (sometimes you have to press power button and volume up until the device vibrates 3 times or on some devices you have to press the small button near the SIM tray or on the back of the device). Start PC Companion and select Support zone then Update my phone/tablet then in Blue Repair my phone/tablet and follow the on screen instructions - When prompted connect your phone still switched off holding volume down or back button - This should start the repair or reformat process. If you are using Windows 8/8.1 or a 64bit operating system then adjust the settings for PC Companion and run in compatibility mode and chose Windows 7 or XP. I hope can be useful. I'm at disposal for any question. Best Regards,

Maybe you are looking for