Preview monitor not displaying properly

i just did a clean install of leopard, then did a clean install of FCS2, and then ran all the updates. a couple days later i try to run color (which worked on this machine when i had tiger)and the preview window is very funky and not usable. i have attached a screenshot. i tried restarting, tried other clips, tried other formats- but nothing seems to get the preview to actually display the video properly.
color did work on this exact setup before i upgraded the OS. I bought anew harddrive and installed everything from scratch. i have the ati x1900 as the main card with pcie lane width set to 16 as well as an ati hd 2600xt with the lane width set to 1x. i have a mac pro with 8 gigs of ram, 8 core x 3.0ghz.
working with prorez footage. no special hardware add ons at all. sent to color command in fcp kept causing a crash as soon as i tried to playback in color (and preview monitor still didn't work).
here is a link to a screeshot of what the monitor previews.
http://smcouples.com/Samples/color.jpg
please help- i can't use color anymore.
P.
Message was edited by: Patrick Moreau

Colormunki is a known no-no with Color. http://discussions.apple.com/thread.jspa?messageID=8640308&#8640308
Searching the forum can reveal your answers, if you use the search function.
However, a color profiler does nothing to help you with regard to consistent color when working with video. Again, you need to use a video input/output device (I sound like a blasted broken record with this) with a video display device capable of a daily setup, like a projector or a video crt or flat panel. Using computer monitors with Color is worthless.

Similar Messages

Trim Monitor not displaying properly

See attached screen shot. As you can see the the numbers are half cut off in the trim monitor.

Colormunki is a known no-no with Color. http://discussions.apple.com/thread.jspa?messageID=8640308&#8640308
Searching the forum can reveal your answers, if you use the search function.
However, a color profiler does nothing to help you with regard to consistent color when working with video. Again, you need to use a video input/output device (I sound like a blasted broken record with this) with a video display device capable of a daily setup, like a projector or a video crt or flat panel. Using computer monitors with Color is worthless.

Preview does not display pdf properly

I have OS X 10.5.8 and Preview 4.2. Preview will not display a bank statement properly. Most of the content is missing. I initially thought this was the bank's fault, but the pdf statement displays OK on my work Mac using Adobe Acrobat Professional. On Preview, howerver, at work (OS X 10.4) it also does not display properly.
Can anyone suggest a fix, or does Apple read these discussions...? Thanks. Graham

"Preview is meant for previewing PDFs generated by OSX applications for printing.
OSX uses its own code to generate and display PDFs, not Adobe's code.
Adobe has been adding features to its PDF code that is used by some non-Apple software.
PDFs generated by such software may not display correctly with Preview, but will work with the latest Adobe Reader."
(courtesy of Malcolm Rayfield in this thread https://discussions.apple.com/message/12739728#12739728 )
So, download and install the latest free Adobe Reader on your home Mac for these statements.
Stefan

Illustrator CC 18.1.1 print preview is not displaying preview properly. Any work around?!

I only started having this problem recently. It might be a Yosemite bug or graphics driver bug. When I go to print in the latest version of Illustrator CC 18.1.1 I get a shrunken window of what print preview should be (see below).
Circumstances are that I have my MBP 15" Retina connected to a Apple Thunderbolt Display. When I'm working in Illustrator on the Thunderbolt display and have the laptop screen open beside it, print preview will not display correctly. If I drag the print dialog box over to the laptop screen, it then shows print preview correctly. Also, I found that if I close the laptop screen and just work off the Thunderbolt display print preview works correctly again. ITS DRIVING ME CRAZY! Please Help!
I'm currently running:
OS X 10.10.2
MacBook Pro (Retina, 15-inch, Early 2013)
2.8 GHz Intel Core i7
Memory 16 GB 1600 MHz DDR3
Graphics NVIDIA GeForce GT 650M 1024 MB
Screenshot from Thunderbolt Display. Print Preview is shrunk to upper-left hand corner:
Screenshot from laptop screen when I brought the print dialog window over to it. The print preview corrected itself:

Thanks pipinngpete. You helped me understand what was going on. Here is my post:
Illustrator print preview is not displaying the preview properly. Any clue as to why?
Rob

Fonts not displaying properly in Creative Cloud files

I just noticed that fonts are not displaying properly in my Creative Cloud files. The strange thing is, they continue to display correctly in files I uploaded prior to release - it's just in files I upload now that the fonts are reverting to some generic display font.
For reference, here is a file uploaded before release:
https://creative.adobe.com/file/7ba1e1dc-993e-4f85-bf2d-7ec4e099929e
And here is the same file uploaded just now:
https://creative.adobe.com/file/82f1ed16-8f8c-45f5-9127-791f08ad9ec9
The display problem also applies to downloads of the newer file as a JPG, PNG or PDF, although the fonts are still present in the downloaded original file. With the older uploaded file, download as PDF is not available (presumably because this was a release feature), but download as JPG and PNG outputs a file with the correct fonts intact.
This is a serious problem, because it makes previews inaccurate as well as making the download feature almost useless. Was it perhaps an unintended side-effect of turning on download as PDF?

On a related topic, here's another Illustrator file with fonts displaying incorrectly, but this time it also has problems with the download links - the options for PNG, JPG and PDF do not appear at all.
https://creative.adobe.com/file/2d6d788d-01e4-488d-90b8-46823f2017e2
This is all very strange, because they did appear in a previous version of this very same file:
https://creative.adobe.com/file/dae50071-9596-44ce-b525-3f52663f8cca
Could it perhaps be related to the strange font behaviour?

Web page not displaying properly - content in wrong place

It's been years since I've done html and this is the first time using Dreamweaver. All my pages have the same header then a horizontal row of link buttons. I have used Divs to create 3 sections of content underneath this. Each div has the following defined for it: #Div { position:absolute; width:913px; height:440px; z-index:1; left: 10px; top: 302px; My main page is not displaying properly. There is a section on the left with text/photo. To the right of this section, there is a second div containing an image map. In Dreamweaver, I preview the page (using Chrome) and it looks fine. However, when I upload it to the web site and then view that page in the web site, the second div is thrown to the upper top right of the page. I do not know what is causing this and how to fix it. Can anyone answer this and perhaps give me some tips?

Start by fixing your HTML errors. You have a significant number of them.
http://validator.w3.org/check?verbose=1&uri=http%3A%2F%2Fgivethegaveltotavel.com%2F
Also, you have some CSS errors.
W3C CSS Validator results for http://givethegaveltotavel.com/ (CSS level 2.1)
Position:absolute is never a good way to layout your web pages. For 98% of what you do, positioning is not required and should be avoided. Learn to use CSS margins, padding and floats to align elements where desired.
CSS margin property.
CSS padding property
CSS Float
Nancy O.

Webfont not displaying properly in design mode or appearing in font list

Just updated Muse and now my heading webfont (Nunito) is not displaying properly in design mode or appearing in the font list. It is, however, displaying properly in preview mode. When I try and delete the font and then add it again I get an error message that says the font can't be added. Any idea what's going on?

Hello,
Please try the steps below. Hopefully this will fix the problem.
1. Close Muse
2. Rename the folders named tk1 and tk2 in the following locations
On Windows: %appdata%\com.adobe.AdobeMuseCC.2014.2\Local Store. You can type this in the Path bar at the top of the Windows Explorer window
On Mac: ~/Library/Preferences/com.adobe.AdobeMuseCC.2014.2/Local Store. You can type this in the Go To Folder dialog (Shift+Command+G)
3. Launch Muse and add the font again
Please let me know if that helps.
Regards
Vivek

DW8 files not displayed properly in DW CS3

Any help will be greatly appreciated in the following
question:
I've been using Dreamweaver 8 successfully in creating and
maintaining several websites. However, when I try to use the newly
purchased Dreamweaver CS3 on HTML files previously created on DW8,
the files are not displayed properly (all elements are jumbled up
together in the "Design" view). But, when I do a "Preview in
Browser", the pages are just fine.
Has any other DW user had similar experiences and if so, any
solutions?
Thanks for any help out there!

DWCS3 is much less tolerant of code mistakes than was DW8,
and your symptoms
suggest that this may be the cause of your problems. Do the
DW8 pages
validate when you go here -
http://validator.w3.org?
Can you post a link to some of these pages?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"bill168" <[email protected]> wrote in
message
news:g559nv$bc3$[email protected]..
> Any help will be greatly appreciated in the following
question:
>
> I've been using Dreamweaver 8 successfully in creating
and maintaining
> several
> websites. However, when I try to use the newly purchased
Dreamweaver CS3
> on
> HTML files previously created on DW8, the files are not
displayed properly
> (all
> elements are jumbled up together in the "Design" view).
But, when I do a
> "Preview in Browser", the pages are just fine.
>
> Has any other DW user had similar experiences and if so,
any solutions?
>
> Thanks for any help out there!
>

Lately pdf files from the Web do not display properly; what is wrong and how can I fix it so I don't have to use IE?

I am a professor and frequently need to open pdfs of academic journal articles from electronic databases. Within the last two or three weeks, when I try to do this using Firefox, only the first page of the pdf displays and the rest are blank. In addition, a bar appears across the top with the message "This pdf file may not display properly." So I have had to switch to Internet Explorer to open the files and do my research. What is going on and how can I fix it so I can open pdf files from the Web in Firefox and have them display properly?

My question is simple - why would you put an application in production that has a lot of bugs? To replace a good and steady Adobe product? My customers will believe that I put a pathetic fallible form online. They are not sophisticated on computers so I just tell them to use IE. Ugh
I must agree with pgwebgirl!

Why is my youtube webpage not displaying properly?

My youtube webpage is not displaying properly. its like tthere is only text and thumbnails and the whle webpage is too damn long. The videos don't play when clicked. Problem on both firefox and chrome. I disabled kaspersky av but it didnt make any difference cuz i thought the firewall mustve been blocking something. check screenshot attached.

You can try these steps in case of issues with web pages:
You can reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and remove cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

My vertical Spry is not displaying properly in IE 8

I am working on my first website using Dreamweaver CS4 and my spry is not displaying properly over my flash photo gallery. It looks ok in Firefox (although the borders are missing on my submenu for "sheds tool list") but in IE 8 the submenus can't be seen. How can I correct this?
My website is www.toolshedstudio.com
Here's my css:
@charset "UTF-8";
/* SpryMenuBarVertical.css - version 0.6 - Spry Pre-Release 1.6.1 */
/* Copyright (c) 2006. Adobe Systems Incorporated. All rights reserved. */
LAYOUT INFORMATION: describes box model, positioning, z-order
/* The outermost container of the Menu Bar, a fixed width box with no margin or padding */
ul.MenuBarVertical
    margin: 0;
    padding: 0;
    list-style-type: none;
    font-size: 100%;
    cursor: default;
    width: 10em;
    border-top-style: none;
    border-right-style: none;
    border-bottom-style: none;
    border-left-style: none;
/* Set the active Menu Bar with this class, currently setting z-index to accomodate IE rendering bug: http://therealcrisp.xs4all.nl/meuk/IE-zindexbug.html */
ul.MenuBarActive
    z-index: 1000;
/* Menu item containers, position children relative to this container and are same fixed width as parent */
ul.MenuBarVertical li
    margin: 0;
    padding: 0;
    list-style-type: none;
    font-size: 100%;
    position: relative;
    text-align: left;
    cursor: pointer;
    width: 170px;
    border-top-style: outset;
    border-right-style: outset;
    border-bottom-style: outset;
    border-left-style: outset;
    border-top-width: thin;
    border-right-width: thin;
    border-bottom-width: thin;
    border-left-width: thin;
/* Submenus should appear slightly overlapping to the right (95%) and up (-5%) with a higher z-index, but they are initially off the left side of the screen (-1000em) */
ul.MenuBarVertical ul
    margin: -5% 0 0 95%;
    padding: 0;
    list-style-type: none;
    font-size: 100%;
    position: absolute;
    z-index: 1020;
    cursor: default;
    width: 8.2em;
    left: -1000em;
    top: 0;
/* Submenu that is showing with class designation MenuBarSubmenuVisible, we set left to 0 so it comes onto the screen */
ul.MenuBarVertical ul.MenuBarSubmenuVisible
    left: 0;
/* Menu item containers are same fixed width as parent */
ul.MenuBarVertical ul li
    width: 8.2em;
DESIGN INFORMATION: describes color scheme, borders, fonts
/* Outermost menu container has borders on all sides */
ul.MenuBarVertical
    border: 1px none #CCC;
/* Submenu containers have borders on all sides */
ul.MenuBarVertical ul
    border: 1px solid #CCC;
/* Menu items are a light gray block with padding and no text decoration */
ul.MenuBarVertical a
    display: block;
    cursor: pointer;
    background-color: #000;
    padding: 0.5em 0.75em;
    color: #CCC;
    text-decoration: none;
/* Menu items that have mouse over or focus have a blue background and white text */
ul.MenuBarVertical a:hover, ul.MenuBarVertical a:focus
    background-color: #33C;
    color: #000;
    font-size: 100%;
/* Menu items that are open with submenus are set to MenuBarItemHover with a blue background and white text */
ul.MenuBarVertical a.MenuBarItemHover, ul.MenuBarVertical a.MenuBarItemSubmenuHover, ul.MenuBarVertical a.MenuBarSubmenuVisible
    background-color: #33C;
    color: #FFF;
SUBMENU INDICATION: styles if there is a submenu under a given menu item
/* Menu items that have a submenu have the class designation MenuBarItemSubmenu and are set to use a background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarVertical a.MenuBarItemSubmenu
    background-image: url(SpryMenuBarRight.gif);
    background-repeat: no-repeat;
    background-position: 95% 50%;
/* Menu items that are open with submenus have the class designation MenuBarItemSubmenuHover and are set to use a "hover" background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarVertical a.MenuBarItemSubmenuHover
    background-image: url(SpryMenuBarRightHover.gif);
    background-repeat: no-repeat;
    background-position: 95% 50%;
BROWSER HACKS: the hacks below should not be changed unless you are an expert
/* HACK FOR IE: to make sure the sub menus show above form controls, we underlay each submenu with an iframe */
ul.MenuBarVertical iframe
    position: absolute;
    z-index: 1010;
    filter:alpha(opacity:0.1);
/* HACK FOR IE: to stabilize appearance of menu items; the slash in float is to keep IE 5.0 from parsing */
@media screen, projection
    ul.MenuBarVertical li.MenuBarItemIE
        display: inline;
        f\loat: left;
        background: #FFF;

Hi
You flash movie doesn't have the parameter wmode=transparent. If you set that, the menu bar will be on top.
<param name="wmode" value="transparent">
I hope this helps.
Ben

Itunes 9 Store - Not Displaying Properly

I am having problems with the iTunes store not displaying properly. I can see the album art, but the background is black. I can not see any of the text and I can not see most of the blue play buttons. This all occurred after upgrading to Itunes 9. What options would I need to change in my anti-virus/security programs in order to potentially correct this issue. I really don't want to have to totally uninstall Itunes and reinstall everything. Help is appreciated.

I can see the album art, but the background is black. I can not see any of the text and I can not see most of the blue play buttons. This all occurred after upgrading to Itunes 9
Drgoo's suggestion from the following post might be worth trying with that:
http://discussions.apple.com/message.jspa?messageID=10390276#10390276

Images not displayed properly

[Migrated from the Syclo Resource Center]
prashanthi_vangala   01/03/2012 06:44,
Hi,I am working on Agentry 5.4.0I have a list screen where for one of the columns I have a rule to display images ( I use checked and unchecked images ). Earlier the images were getting displayed properly on the ATE but it is not working now and I did not make any changes to the image properties then.But after this, I tried couple of things with the image properties to make it work, like when I do not use any mask colour the image does not get displayed but when i use any maks colour the image gets displayed but its completely blacked out ( and thus for checked image, cannot see the check mark and its completely blacked out ).I face same issue with the login image as well. I added a new Image ( Logo ) to my App for the login Screen, but even this image does not appear on the login screen.
I also tried deleting the Dev folder and re-publishing, but even this does not work.
-Prashanthi
Jason Latko   01/03/2012 11:42
Try deleting the Application directory under your development server where the images reside and publish again.
Completely clear your ATE and transmit again from scratch.
Also, what mask color are you using?
Try using a green hugh and not black or white for the mask.
Jason Latko - Senior Product Developer at Syclo
prashanthi_vangala   01/03/2012 12:38
Hi Jason,Thank you for the reply.I already tried all the things you have mentioned, but the same issue exits still.
Prashanthi
Jason Latko   01/03/2012 12:40
Is it just the ATE, or do you have the same problems using the WIn32 or PPC clients?
Jason Latko - Senior Product Developer at Syclo
prashanthi_vangala   01/04/2012 06:21
Hi Jason,Behaviour in ATE:I have changed the image now and tested with the new image . Now, its behaving strangely:When I do a sync after publishing or a reset of ATE; I see the new image properly displayed on the screen but when I leave the screen and come back to the same screen again, the new image is getting replaced by the old image ( atleast the old image is not displayed properly, it appears like a black square box..and because of the same issue I had with this image I switched to the new image ). Behaviour in Win32 Client:When I tested with the client, I see the new image properly for the first time and when i leave the screen and come back the image disappears..This is the behaviour in client.
Please suggest.
-Prashanthi
Jason Latko   01/09/2012 11:35
Prashanthi,What did you use to create these images?
They are simple bitmaps I assume?
Try creating some very simple images using Microsoft Paint, then set a mask of green in Agentry.
Your problem sounds familiar, but I can't find a matching bug in our database.
Maybe someone else has experienced this?
You could also try upgrading to a newer version of Agentry to see if the problem goes away.
We are currently on version 6.0.4.Jason Latko - Senior Product Developer at Syclo
prashanthi_vangala   01/11/2012 10:02
Hi Jason,
Thank you for the reply.
But strangely, from past few days I see that the image is working fine again.
But kept this topic open because it was wierd, that the image is working correctly again without making any major change. What I did was to just write the rule again which calls the image ( though i did this before and did not work then but worked now ) and to observe the image behaviour for few days.But it seems like it is fine now.
Thanks and Regards,Prashanthi

We am using "jv:imageButton" tag for displaying the image and below is the tag code,
<jv:imageButton styleClass="buttonStyle"
selected="true"
onclick="networkCanvas.setInteractor(clientSelect)"
image="../oracle/communications/inventory/ui/images/arrow.png" buttonGroupId="interactors"
rolloverImage="../oracle/communications/inventory/ui/images/arrowh.png"
selectedImage="../oracle/communications/inventory/ui/images/arrowd.png"
title="#{inventoryUIBundle.SELECT}"
message="#{inventoryUIBundle.SELECT}" />
The able code is present in the below path,
..\public_html\oracle\communications\inventory\ui\network\page\NetworkView.jsff
The images are present in the following path,
..\public_html\oracle\communications\inventory\ui\images\zoomrecth.png
I am not thinking this is a Platform Beta 3 uptake issue. And I am suspecting an issue with integration of ilog with ADF. Any help in this regard would be helpful.
regards,
Chandra
Edited by: user638992 on Feb 25, 2010 3:40 AM

Ads are not displaying properly in Safari, v 4.0.5

I am having an odd problem with display ads from our local newspaper not displaying properly on my Mac Pro in Safari. I suspect that the issue might be related to having had some AdBlock app on my system a few months ago. I removed the app and some ads display, but others are just a white block with nothing inside. Is there any way to figure out why the content doesn't load?
The website is http://www.echopress.com
The ads I'm having issues with are the 300x250 ads in the right 3rd column, located directly below the weather info and above the "marketplace" ads.
Any ideas or troubleshooting tips?
Thanks,
Grady
Oh, why do I wanna see em in the first place? I'm an advertiser on the site and would like to see my own ads load occasionally.

Hey ho, Grady!
I can see all the ads on the right,
with the exception of the very top (first) box
which has the header of "Weather Alerts).
It's blank, and I'm assuming you have no alerts at the present.
All the rest of the paid for ads show.
So, what I would do is clear my Safari cache, history, and
in Preferences>Security, clear all the cookies from that site.
Hope this helps.
If you need more info just holler.
Let us know how you're doing, OK?

Elements Organizer 8 - some WMV are not displayed properly in the Play Video but are in Play Vide

Hello:
Elements Organizer - some WMV are not displayed properly in the Play Video but are in Play Vide on Full screen. What's the problem? Wrong codec?

Because WMV's can contain a lot of flags, like DRM, they can exhibit odd behavior, indeed.
Usually, AV files will display in their native resolution, i.e. in their set Frame Size/Aspect Ratio and with their set PAR (Pixel Aspect Ratio), but sometimes those flags are missed, or are altered by other programs.
Remember, WMV's are designed to be streaming delivery-only, and are not intended, or designed to be edited. Most NLE's (Non Linear Editors) will allow them to be edited, but will require extra processing to do so. As is mentioned, WMM is designed around editing that delivery-only format, but most others are not.
There are many other formats/CODEC's, that ARE designed to be edited by the vast majority of NLE's, such as DV-AVI Type II's.
The best workflow is to NOT bring WMV's into the mix, unless one is using WMM exclusively. Converting those to an easily editable format/CODEC will always be the best course of action.
Good luck,
Hunt

Preview monitor not displaying properly

Similar Messages

Maybe you are looking for