Preview & Navigator issues

I'm running LR 3 on
Model Name: iMac
  OSX 10.6.4
  Model Identifier: iMac8,1
  Processor Name: Intel Core 2 Duo
  Processor Speed: 2.8 GHz
  Number Of Processors: 1
  Total Number Of Cores: 2
  L2 Cache: 6 MB
  Memory: 2 GB
  Bus Speed: 1.07 GHz
1.   I'm issues with the preview window not updating in the develop module but showing correctly in the library module.  For instance I applied the noise removal in develop mode and the navigator was showing correctly but the preview window wasn't .. I was getting frustrated so I went over to the library module to check something and lo and behold it was previewing correctly in Library mode so I clicked back into the Develop module and it was incorrect still.  Flicking between the two modules showed different results with the library being the only correct one.  I'm noticing this quite frequently but not all the time.
2.  The navigator window won't always show previews when hovering over the presets.   I usually have to hover over the image for a few seconds and then go back over a preset to get it to show .. ie.  zig zagging back and forth hovering between preview & preset over each one.
3.  I'm also finding that my presets set up with noise removal are actually very different between RAW & JPG .. is this normal?  Where my presets were set for a small amount, it works in RAW, but if I use that same preset on a JPG the noise removal flies all the way to maximum and my clients look like plastic Barbies.  Not pretty at all!!!
4.  If I set my filter to show only flagged items and later close LR it resets itself to show everything.  I'd like it to stay with the filtering I set before I closed as I usually go on from where I left off.

1. Known Issue http://forums.adobe.com/message/2899461?tstart=0#2899461
2. Probably it's performance problems. Lightroom is simply to slow to catch up.
3. Do you mean that a preset was saved with a small amount, but the Jpegs are getting applied with a different numeric value of NR? That would be a big bug.
Or do you mean that the same numeric value of the NR slider has different effect on Jpeg vs. Raw? That would be normal, I think.
4. That's by design in LR3. But the team seems to be looking for solutions, as many users complain about this. http://forums.adobe.com/thread/659662?tstart=0

Similar Messages

  • Many Sporadic Preview Related Issues

    Not sure if this is where to post/report Lightroom 5 issues or not, but here are preview-related issues I am experiencing...
    Preview panel "preview" freezes indefinitely.
    App very slow to load while creating new previews. (previews take forever to create and update)
    Wrong previews showing for wrong images when swapping between folders, etc. (ie: all photos, last import, custom collections)
    This one is a little different...
    Ratings lost when switching between folders, etc. (ie: all photos, last import, custom collections)
    This was a clean install that ran beautifully at first. Started noticing this more and more after using the spot tool. (my last step in processing a job)
    I use separate catalogs per job. Some as small as a few dozen images. (family stuff) Others, as large as 500-600. (engagement and wedding clients)
    Hope you are working on this. It's making work a struggle. I'm not just a "consumer". ;-)

    This is a user to user forum so the responces you recieve here will mostly be from users like your self. I am sure someone will respond on how to help dealing with the problem you are experiencing.
    The official forum for reporting bugs and making feature requests is at the web link below.
    http://feedback.photoshop.com/photoshop_family/products/photoshop_family_photoshop_lightro om

  • SP navigation issue -Error in sp2013

    Hi,
           I am facing sp navigation issue in my production server frequently. I am using Sharepoint RTM version . how can i resolve this one . I tried all solutions in the google , as of now, no hope.
    Your help highly appreciated
    Thanks,
    Bala

    Hi Bala,
    According to your description, my understanding is that you got an error when you used navigation in SharePoint 2013.
    Please install April CU 2013 for SharePoint 2013, compare the result.
    http://support.microsoft.com/default.aspx?scid=kb;EN-US;2726992
    More information, please refer to the link:
    http://venkychilukuri.wordpress.com/2013/07/02/an-unexpected-error-occurred-while-manipulating-the-navigational-structure-of-this-web/
    I hope this helps.
    Thanks,
    Wendy
    Wendy Li
    TechNet Community Support

  • Strange Navigation Issues After Using Pop-up Menu

    I have a Blu-ray project I'm working on.  It's 1920x1080 resolution. 
    I have a main menu and then seven sub-menus as chapter-selection menus for three different videos.
    The Main Menu has four buttons.  Button one is a highlights video, button two takes the user to the first of three chapter-selection menus for the first video.  Button three takes the user to the first of two chapter-selection menus for the second video and button four takes the user to the first of two chapter-selection menus for the third video.  I have transitions from the main menu to each of the three chapter-selection menus and back from any of the seven chapter-selection menus to the main menu.
    I also have a pop-up menu with the same four buttons on it as the main menu, except that the top button takes you to the main menu rather than playing the highlights video.
    The problem I have is that all of the navagition works fine when moving around the menus, unless you open the pop-up menu during a video and navigate to one of the chapter-selection menus.  When you do this, it works.  It goes to the first page of the chapter-selection menu for any of the three videos, but if you then go to the main menu from there (each chapter-selection menu has a "back to main menu" button on it), it will play the transition, but then jump you to one of the chapter-selection menus for the video who's chapter-selection menu you were just on.
    For example:  If I play the highlights video and while it's playing I open the pop-up menu and choose Video 3, it will take me to the first chapter-selection menu for Video 3.  If, once that menu comes up, I then scroll down to the "Back to Main Menu" button on that page and choose it, the transition from that menu to the Main Menu will play, but after it finishes, the Blu-ray will jump to the last chapter-selection menu page for Video 3.  If I then navigate back to menu page 1 of the chapter-selection menus for Video 3 and choose the exact same "Back to Main Menu" button, the transition will play again and this time the Main Menu will open up.
    The links for all of the menu buttons are correct, I've check them numerous times.  It just seems that they get screwed up after you've navigated somewhere from the pop-up menu.
    Sorry this is so long, but I wanted to try to explain it as best as possible.
    Any suggestions?
    Thanks.

    Hey Shark.  I read your explanation of what's happening, but I am not sure why you are having that weird navigation issue.  There are a lot of weird anomalies that happen with Encore authored blu-rays, and things that just don't work that really should.  For the price, it does the job, but there are limitations.
    Last year when I started using it for blu-ray authoring, there were non-stop road blocks and things to overcome.
    Check out the documented misery.  It gets better at the end  .
    http://forums.adobe.com/message/3446748#3446748

  • 2.1.2 update does not fix DVD Navigation issues :(

    The FrontRow 2.1.2 update still doesn't fix the DVD navigation issues where sub menus on MANY DVDs are not navigable. Using the up / down keys on the keyboard or remote causes the Volume to change and not navigating the menus like it is supposed to.
    This is a severe issue as it makes it impossible to play some DVDs or turn on the subtitles.

    Yeah, I have experienced this as well. Ridiculous -- how could this issue not have come up in product testing by the time the software has reached version 2.0? The solution on Apple's end should be obvious. All 4 directional buttons must act only as directional commands when using a DVD, and all other functions (such as volume) can only be accessible by hitting MENU first to bring up a list of other options.
    I'm all for simplicity, but this is the fault of the boneheaded 6-button Apple Remote. It requires their software to overload buttons with different commands depending on context, which is clearly an unacceptable limitation. They'll have to break down and roll out a proper remote with more discrete buttons one of these days and come to terms with the fact that shoehorning everything onto 6 buttons is not an elegant solution.

  • Navigation Issue on HC 91, Tools 8.51, SQL Server 2008 on Windows 2008

    Hi Guys,
    I installed HCM 91 -Tools 851-SQL Server 2008 on Windows 2008 server. App server running perfectly, initiated web server fine.
    When I login in n-tier/web via PS userid, navigation to Panels are fine but when I try to click on any page, it gives error IE exception at the bottom – “Error on the page”, page does nothing, no searches and does not display the page.
    I tried installation from ground zero the 3rd time last night, followed all the steps and stuck at this point.
    I am wondering if anyone has encountered these issues.
    I appreciate any pointers.
    Thanks in advance.
    Cheers
    -Vinay

    Same question, same answer :
    http://peoplesoft.ittoolbox.com/groups/technical-functional/peopletools-l/navigation-issue-on-hc-91-tools-851-sql-server-2008-on-windows-2008-server-3837147
    Nicolas.

  • Report Navigation Issue after upgrading from 10g to 11g

    Hi Experts
    I have recently upgarded my solution from 10g to 11g. Issue is when I click on column value for navigation it doen't navigate the display remains unchanged
    1) I have created new dashboard and placed this report in new dashboard the navigation works fine.
    2) I have created new report and placed that report in old dashboard it doesn't work
    why is it so I undertand that there is problem with Dashboard and not with report but I am unable to figure it out
    what can be the problem? any suggestions
    Thanks
    Sameer

    Hi Experts
    I have recently upgarded my solution from 10g to 11g. Issue is when I click on column value for navigation it doen't navigate the display remains unchanged
    1) I have created new dashboard and placed this report in new dashboard the navigation works fine.
    2) I have created new report and placed that report in old dashboard it doesn't work
    why is it so I undertand that there is problem with Dashboard and not with report but I am unable to figure it out
    what can be the problem? any suggestions
    Thanks
    Sameer

  • Report Navigation issue causing automatic logoff from OBIEE 10.1.3.3.2

    Hi BI Experts,
    Here is my unique problem i guess
    the Environment is OBIEE 10.1.3.3.2 and using OOB Oc4j app server.
    There are 4 Union Reports(Report1, report2, report3, report4) where we enabled Navigation from report1 to report2, report2 to report3, and report3 to report4. since this is Navigation from one Union Report to Another report, the OOB Navigation did not work.
    Navigation piece was achieve using 'GONav' function so that Value selected from Report one is Passed as filter to second report and so on. The Problem is.....when Navigated from report1 to report2 until report3, the Navigation works fine and filters gets passed. when Navigating from Report3 to Report4, the OBIEE Users is automatically logged off and user has to enter the username and password to enter. When username/password is entered at this stage, the Report4 will run and display the results. Please help us immediately as we are live and this is P1 Issue.
    we did not find this issue in DEV/UAT....its working fine after replacing the webcatalog from PRODUCTION back to DEV and UAT.
    we tried trouble shooting this by
    1. restarting all the BI Services including the OC4J
    2. unpacking new webcatalog and
    3. Increasing the JVM Size on Solaris
    Please Help
    Thanks
    Rake

    @[html]"<font class=Nav onclick=\"JavaScript:GoNav(event, '/shared/SCM-BBB/Report_Set1/FCGS_Hybrid_Summary' , 'Dim - Products', 'BusinessUnit', '"@"');\">"@"</font>
    Saw Log
    Error
    Severity: 40
    Time: Mon Nov 22 22:47:32 2010
    File: project/webcatalog/path.cpp Line: 318
    Properties: RptPath-/shared/SCM-BBB/Report_Set3/BU_Hybrid_Summary;SID-0d41s0epqnnq9a7gn4g81oc3si;ThreadID-63;HttpCommand-PortalGo;RSP-d:dashboard~p:ae3g2pnbb1kelt3m~r:ce6sfi6quta3gbtb;RemoteIP-10.72.20.104;User-
    Location:
         saw.views.evc
         saw.httpserver.request
         saw.rpc.server.responder
         saw.rpc.server
         saw.rpc.server.handleConnection
         saw.rpc.server.dispatch
         saw.threadPool
         saw.threads
    Invalid item name () -- not allowed to be empty
    Type: Error
    Severity: 40
    Time: Mon Nov 22 22:47:32 2010
    File: project/webcatalog/path.cpp Line: 318
    Properties: RptPath-/shared/SCM-BBB/Report_Set3/BU_Hybrid_Summary;SID-0d41s0epqnnq9a7gn4g81oc3si;ThreadID-63;HttpCommand-PortalGo;RSP-d:dashboard~p:ae3g2pnbb1kelt3m~r:ce6sfi6quta3gbtb;RemoteIP-10.72.20.104;User-
    Location:
         saw.views.evc
         saw.httpserver.request
         saw.rpc.server.responder
         saw.rpc.server
         saw.rpc.server.handleConnection
         saw.rpc.server.dispatch
         saw.threadPool
         saw.threads
    Invalid item name () -- not allowed to be empty
    Type: Error
    Severity: 40
    Time: Mon Nov 22 22:47:32 2010
    File: project/webcatalog/path.cpp Line: 318
    Properties: RptPath-/shared/SCM-BBB/Report_Set3/BU_Hybrid_Summary;SID-0d41s0epqnnq9a7gn4g81oc3si;ThreadID-63;HttpCommand-PortalGo;RSP-d:dashboard~p:ae3g2pnbb1kelt3m~r:ce6sfi6quta3gbtb;RemoteIP-10.72.20.104;User-
    Location:
         saw.views.evc
         saw.httpserver.request
         saw.rpc.server.responder
         saw.rpc.server
         saw.rpc.server.handleConnection
         saw.rpc.server.dispatch
         saw.threadPool
         saw.threads
    Invalid item name () -- not allowed to be empty
    Type: Error
    Severity: 40
    Time: Mon Nov 22 22:47:32 2010
    File: project/webcatalog/path.cpp Line: 318
    Properties: RptPath-/shared/SCM-BBB/Report_Set3/BU_Hybrid_Summary;SID-0d41s0epqnnq9a7gn4g81oc3si;ThreadID-63;HttpCommand-PortalGo;RSP-d:dashboard~p:ae3g2pnbb1kelt3m~r:ce6sfi6quta3gbtb;RemoteIP-10.72.20.104;User-
    Location:
         saw.views.evc
         saw.httpserver.request
         saw.rpc.server.responder
         saw.rpc.server
         saw.rpc.server.handleConnection
         saw.rpc.server.dispatch
         saw.threadPool
         saw.threads
    Invalid item name () -- not allowed to be empty
    Type: Error
    Severity: 40
    Time: Mon Nov 22 22:47:32 2010
    File: project/webcatalog/path.cpp Line: 318
    Properties: RptPath-/shared/SCM-BBB/Report_Set3/BU_Hybrid_Summary;SID-0d41s0epqnnq9a7gn4g81oc3si;ThreadID-63;HttpCommand-PortalGo;RSP-d:dashboard~p:ae3g2pnbb1kelt3m~r:ce6sfi6quta3gbtb;RemoteIP-10.72.20.104;User-
    Location:
         saw.views.evc
         saw.httpserver.request
         saw.rpc.server.responder
         saw.rpc.server
         saw.rpc.server.handleConnection
         saw.rpc.server.dispatch
         saw.threadPool
         saw.threads
    Invalid item name () -- not allowed to be empty
    Type: Error
    Severity: 40
    Time: Mon Nov 22 22:47:34 2010
    File: project/webcatalog/path.cpp Line: 318
    Properties: RptPath-/shared/SCM-BBB/Report_Set3/BU_Hybrid_Summary;SID-0d41s0epqnnq9a7gn4g81oc3si;ThreadID-63;HttpCommand-PortalGo;RSP-d:dashboard~p:ae3g2pnbb1kelt3m~r:ce6sfi6quta3gbtb;RemoteIP-10.72.20.104;User-rmuppiri
    Location:
         saw.views.evc
         saw.httpserver.request
         saw.rpc.server.responder
         saw.rpc.server
         saw.rpc.server.handleConnection
         saw.rpc.server.dispatch
         saw.threadPool
         saw.threads
    Invalid item name () -- not allowed to be empty
    Type: Error
    Severity: 40
    Time: Mon Nov 22 22:47:34 2010
    File: project/webcatalog/path.cpp Line: 318
    Properties: RptPath-/shared/SCM-BBB/Report_Set3/BU_Hybrid_Summary;SID-0d41s0epqnnq9a7gn4g81oc3si;ThreadID-63;HttpCommand-PortalGo;RSP-d:dashboard~p:ae3g2pnbb1kelt3m~r:ce6sfi6quta3gbtb;RemoteIP-10.72.20.104;User-rmuppiri
    Location:
         saw.views.evc
         saw.httpserver.request
         saw.rpc.server.responder
         saw.rpc.server
         saw.rpc.server.handleConnection
         saw.rpc.server.dispatch
         saw.threadPool
         saw.threads
    Invalid item name () -- not allowed to be empty
    Type: Error
    Severity: 40
    Time: Mon Nov 22 22:47:34 2010
    File: project/webcatalog/path.cpp Line: 318
    Properties: RptPath-/shared/SCM-BBB/Report_Set3/BU_Hybrid_Summary;SID-0d41s0epqnnq9a7gn4g81oc3si;ThreadID-63;HttpCommand-PortalGo;RSP-d:dashboard~p:ae3g2pnbb1kelt3m~r:ce6sfi6quta3gbtb;RemoteIP-10.72.20.104;User-rmuppiri
    Location:
         saw.views.evc
         saw.httpserver.request
         saw.rpc.server.responder
         saw.rpc.server
         saw.rpc.server.handleConnection
         saw.rpc.server.dispatch
         saw.threadPool
         saw.threads
    Invalid item name () -- not allowed to be empty
    Type: Error
    Severity: 40
    Time: Mon Nov 22 22:47:34 2010
    File: project/webcatalog/path.cpp Line: 318
    Properties: RptPath-/shared/SCM-BBB/Report_Set3/BU_Hybrid_Summary;SID-0d41s0epqnnq9a7gn4g81oc3si;ThreadID-63;HttpCommand-PortalGo;RSP-d:dashboard~p:ae3g2pnbb1kelt3m~r:ce6sfi6quta3gbtb;RemoteIP-10.72.20.104;User-rmuppiri
    Location:
         saw.views.evc
         saw.httpserver.request
         saw.rpc.server.responder
         saw.rpc.server
         saw.rpc.server.handleConnection
         saw.rpc.server.dispatch
         saw.threadPool
         saw.threads
    Invalid item name () -- not allowed to be empty
    Type: Error
    Severity: 40
    Time: Mon Nov 22 22:47:34 2010
    File: project/webcatalog/path.cpp Line: 318
    Properties: RptPath-/shared/SCM-BBB/Report_Set3/BU_Hybrid_Summary;SID-0d41s0epqnnq9a7gn4g81oc3si;ThreadID-63;HttpCommand-PortalGo;RSP-d:dashboard~p:ae3g2pnbb1kelt3m~r:ce6sfi6quta3gbtb;RemoteIP-10.72.20.104;User-rmuppiri
    Location:
         saw.views.evc
         saw.httpserver.request
         saw.rpc.server.responder
         saw.rpc.server
         saw.rpc.server.handleConnection
         saw.rpc.server.dispatch
         saw.threadPool
         saw.threads
    Invalid item name () -- not allowed to be empty
    Type: Error
    Severity: 40
    Time: Mon Nov 22 22:47:34 2010
    File: project/webcatalog/path.cpp Line: 318
    Properties: RptPath-/shared/SCM-BBB/Report_Set3/BU_Hybrid_Summary;SID-0d41s0epqnnq9a7gn4g81oc3si;ThreadID-63;HttpCommand-PortalGo;RSP-d:dashboard~p:ae3g2pnbb1kelt3m~r:ce6sfi6quta3gbtb;RemoteIP-10.72.20.104;User-rmuppiri
    Location:
         saw.views.evc
         saw.httpserver.request
         saw.rpc.server.responder
         saw.rpc.server
         saw.rpc.server.handleConnection
         saw.rpc.server.dispatch
         saw.threadPool
         saw.threads
    Invalid item name () -- not allowed to be empty
    Type: Error
    Severity: 40
    Time: Mon Nov 22 22:47:34 2010
    File: project/webcatalog/path.cpp Line: 318
    Properties: RptPath-/shared/SCM-BBB/Report_Set3/BU_Hybrid_Summary;SID-0d41s0epqnnq9a7gn4g81oc3si;ThreadID-63;HttpCommand-PortalGo;RSP-d:dashboard~p:ae3g2pnbb1kelt3m~r:ce6sfi6quta3gbtb;RemoteIP-10.72.20.104;User-rmuppiri
    Location:
         saw.views.evc
         saw.httpserver.request
         saw.rpc.server.responder
         saw.rpc.server
         saw.rpc.server.handleConnection
         saw.rpc.server.dispatch
         saw.threadPool
         saw.threads
    Invalid item name () -- not allowed to be empty
    Type: Error
    Severity: 40
    Time: Mon Nov 22 22:47:34 2010
    File: project/webcatalog/path.cpp Line: 318
    Properties: RptPath-/shared/SCM-BBB/Report_Set3/BU_Hybrid_Summary;SID-0d41s0epqnnq9a7gn4g81oc3si;ThreadID-63;HttpCommand-PortalGo;RSP-d:dashboard~p:ae3g2pnbb1kelt3m~r:ce6sfi6quta3gbtb;RemoteIP-10.72.20.104;User-rmuppiri
    Location:
         saw.views.evc
         saw.httpserver.request
         saw.rpc.server.responder
         saw.rpc.server
         saw.rpc.server.handleConnection
         saw.rpc.server.dispatch
         saw.threadPool
         saw.threads
    Invalid item name () -- not allowed to be empty
    Type: Error
    Severity: 40
    Time: Mon Nov 22 22:47:34 2010
    File: project/webcatalog/path.cpp Line: 318
    Properties: RptPath-/shared/SCM-BBB/Report_Set3/BU_Hybrid_Summary;SID-0d41s0epqnnq9a7gn4g81oc3si;ThreadID-63;HttpCommand-PortalGo;RSP-d:dashboard~p:ae3g2pnbb1kelt3m~r:ce6sfi6quta3gbtb;RemoteIP-10.72.20.104;User-rmuppiri
    Location:
         saw.views.evc
         saw.httpserver.request
         saw.rpc.server.responder
         saw.rpc.server
         saw.rpc.server.handleConnection
         saw.rpc.server.dispatch
         saw.threadPool
         saw.threads
    Invalid item name () -- not allowed to be empty
    Type: Error
    Severity: 40
    Time: Mon Nov 22 22:47:34 2010
    File: project/webcatalog/path.cpp Line: 318
    Properties: RptPath-/shared/SCM-BBB/Report_Set3/BU_Hybrid_Summary;SID-0d41s0epqnnq9a7gn4g81oc3si;ThreadID-63;HttpCommand-PortalGo;RSP-d:dashboard~p:ae3g2pnbb1kelt3m~r:ce6sfi6quta3gbtb;RemoteIP-10.72.20.104;User-rmuppiri
    Location:
         saw.views.evc
         saw.httpserver.request
         saw.rpc.server.responder
         saw.rpc.server
         saw.rpc.server.handleConnection
         saw.rpc.server.dispatch
         saw.threadPool
         saw.threads
    Invalid item name () -- not allowed to be empty
    Type: Error
    Severity: 40
    Time: Mon Nov 22 22:47:59 2010
    File: project/webthreads/threadpool.cpp Line: 312
    Properties: ThreadID-97
    Location:
         saw.threadPool
         saw.threads
    ThreadPool<HostLookup>: Worker thread job errored out. Unable to resolve the name for 10.72.20.104.
    Error Codes: Y9D5IDNK:
    HOST_NOT_FOUND
    Type: Error
    Severity: 40
    Time: Mon Nov 22 22:47:59 2010
    File: project/webthreads/threadpool.cpp Line: 312
    Properties: ThreadID-96
    Location:
         saw.threadPool
         saw.threads
    ThreadPool<HostLookup>: Worker thread job errored out. Unable to resolve the name for 10.72.20.104.
    Error Codes: Y9D5IDNK:
    HOST_NOT_FOUND
    Type: Error
    Severity: 40
    Time: Mon Nov 22 22:47:59 2010
    File: project/webthreads/threadpool.cpp Line: 312
    Properties: ThreadID-97
    Location:
         saw.threadPool
         saw.threads
    ThreadPool<HostLookup>: Worker thread job errored out. Unable to resolve the name for 10.72.20.104.
    Error Codes: Y9D5IDNK:
    HOST_NOT_FOUND
    Type: Error
    Severity: 40
    Time: Mon Nov 22 22:47:59 2010
    File: project/webthreads/threadpool.cpp Line: 312
    Properties: ThreadID-95
    Location:
         saw.threadPool
         saw.threads
    ThreadPool<HostLookup>: Worker thread job errored out. Unable to resolve the name for 10.72.20.104.
    Error Codes: Y9D5IDNK:
    HOST_NOT_FOUND
    Edited by: kumr on Nov 25, 2010 9:31 PM

  • Print preview invoice issue for a parcular invoice in vf03

    Hi,
    I am facing an issue with the print preview invoice. I have 2 billing document nos., for billing document 3117101008 when I go to "Billing Document"->"Issue to output"-> and click on "print preview" I get an output, but for the other billing document 3117101007 when I click on "Print preview" nothing happens, it just keeps on loading and everything gets hanged.
    Do I need to do any modifications in my custom include "YV0023INV_PRINT_F01" or is there anything linked with the header details table 'IT_HU_HEAD'.
    Please advise, appreciate your efforts.
    Thanks

    Hello Bawneet,
    Are you facing this issue only to this billing document ?
    Did you check the same for 1008 billing document ? First try to open 1007 and then next open 1008 document, here please check are you facing the same issue like screen keeps on loading issue.
    Please check this and come back with your issues.
    Thanks & Regards,
    Lakshmi S

  • Bluescreen/Desk Top Navigator issues

    New computer, less than 3 months old, I am suddenly having shut down issues and the desktop navigator is not responding...I am a novice..
    New Bitdefender 2010 anti virus software installed recently, also Skype.
    Have uninstalled Skype, has not helped with this issue.
    What to do next?
    Problem signature:
      Problem Event Name:                        BlueScreen
      OS Version:                                          6.0.6001.2.1.0.768.3
      Locale ID:                                             1033

    Remove bitdefender and try using some other anti-virus app like avast.You may have to wait for some time before a possible solution will come up.
    Cheers and regards,
    • » νιנαｿѕαяα∂нι ѕαмανє∂αм ™ « •
    ●๋•کáŕádhí'ک díáŕý ツ
    I am a volunteer here. I don't work for Lenovo

  • Navigation issue in OBIEE 11g from report1 to report2

    Hi All,
    I am in OBIEE 11.1.1.6.2, I have a two reports report1 and report 2
    report 1 is like this (i.e it contains fields from Emp1 dim table and fact table)
    Emp1.EmpCode| Emp1.Empname| fact.Revenue
    1|David|100
    2|Jim|200
    3|Terry|500
    report 2 is like this (ie it contains fields from Emp2 dim table, Sales dim table and fact table)
    Emp2.Empname|Sales.Salesnumber|fact.revenue
    David|222|25
    David|333|75
    Jim|888|150
    Jim|999|50
    Terry|666|400
    Terry|666|100
    This is the issue,
    I need to have a navigation on the revenue column of report1, so that it passes the value of Emp1.Empname to report2 (on other dashboard page) and displays me the report for that employee only. So for eg, if i click on '100' in report 1, it should pass the value of David to report2 and show me rows corresponding to David only. The issue is my Emp1 table and Emp2 table are two different tables, they just have Empname field in common. If it would have been same table in both the reports, I would have done Empname column "is prompted" in report2.
    But How can I do that in this case? is there any way to take the value is some kind of variable and apply it to report2.
    Any help would be greatly appreciated.
    Thanks,
    Ronny

    Thanks Veeravalli,
    But in mater detail view too, If I make Emp1.empname column as master, I will have to include the same column in the detail view too so as to limit the detail report on the basis of empname.
    But in my case, I have Emp2.empname ( a different table) in my report2 which I want to limit on the basis on Emp1.empname column. Can I create a master detail report in which master column in Emp1.empname and detail column ( which is listening) is Emp2.empname?
    I hope you got my point.
    Thanks,
    Ronny

  • Navigation issue in an analysis expanded to All Rows

    I have noticed strange behavior in OBIEE 11.1.1.3 when navigating from analyses which are expanded to All Rows.
    For example: when the user navigates (collapses) a parent object in a hierarchy the expanded analysis reloads and returns to the default view of 25 rows, so the user has to expand it to All Rows again to be able to scroll down to the place of drilling.
    Is there a way to keep the expanded view when navigating from analyses displayed in All Rows?
    Changing the default number of records displayed per page in the instanceconfig.xml file doesn't solve the problem.

    After upgrading OBIEE to 11.1.1.6 version this issue still remains, but it is 'masked' with the larger bug in the Navigation in Parent Child Hierarchy.
    Does anyone know if this 'object expanding' from All Rows and reload to the default view of 25 rows has been registered as a bug?
    Is it included in one of the patches available for 11.1.1.6?

  • Adobe PDF Preview Handler Issue in WIndows 8 64 Bit Machine - After installing Adobe Pro 11.0.10

    Hi Guys ,
    We are facing a serious issue with Windows 8 and Adobe PDF Preview Handler . We are using the PDFPrevHndlr.dll from Adobe to show PDF Previews in our application. It is working fine in Windows 7 and Vista and for some reason it is not working in Windows 8.1 64 bit machines after upgrading to Adobe Pro 10.0.10 .  Please help us figure out what is the root cause of this issue .
    During a close analysis we have found that the PrevHost.exe( Windows component ) is failing soon after it is being invoked . Any help in this is much appreciated.
    Regards
    Sree

    Hi Sree,
    According to your description, your case related to Adobe PDF Preview Handler. This is third-party product. I am afraid this is out of our support. Please ask in their special forum
    https://forums.adobe.com/community/adobe_reader_forums
    By the way, after do some search, it seems not working for 64bit machine,
    >> It is working fine in Windows 7 and Vista
    Also work fine in win7/vista 64bit????
    If your scenario is not working in 64bit machine, try to put "adobe pdf preview handler 64-bit fix" in search engine. Good luck.
    Have a nice day!
    Kristin
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Adobe PDF Preview Handler Issue in WIndows 8 64 Bit Machine

    Hello Gurus ,
    We are facing a serious issue with Windows 8 and Adobe PDF Preview Handler . We are referring the PDFPrevHndlr.dll from Adobe to show PDF Previews in our application. It is working fine in Windows 7 and Vista and for some reason it is not working in Windows
    8.1 64 bit machines . Any help on this topic is much appreciated.
    Regards Sree

    Hi Sree,
    According to your description, your case related to Adobe PDF Preview Handler. This is third-party product. I am afraid this is out of our support. Please ask in their special forum
    https://forums.adobe.com/community/adobe_reader_forums
    By the way, after do some search, it seems not working for 64bit machine,
    >> It is working fine in Windows 7 and Vista
    Also work fine in win7/vista 64bit????
    If your scenario is not working in 64bit machine, try to put "adobe pdf preview handler 64-bit fix" in search engine. Good luck.
    Have a nice day!
    Kristin
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • In "Preview" 2 issues: clear last images opened & zoom not working

    Any images opened in "Preview" from the past, all open up when I select other or new images to view. Basically anything I've opened in Preview since the install of Lion all opens when I select new images or items to view in Preview. Just now, 15 separate windows opened after I selected 3 images from the same folder. The other windows all contain items and images I've opened in the past few weeks. This is crazy annoying. I've never seen this before. I looked in preferences and I can't find anything to clear last opened or something to that effect. Please advise.
    Secondly, in Lion, on both my Macbook Pro & iMac, I can no longer use my smart mouse, trackpad...to expand the items/images in my folders prior to opening them. Usually I could open a folder, see there are numerous images and use my fingers to zoom in & out on all the items of that folder w/my trackpad. Since Lion, no more.

    In case anyone else has noticed this issue, I found the answer. It's a Lion issue, so delete the following plist:
    ~/Library/Containers/com.apple.Preview/

Maybe you are looking for

  • Error occurred in the data selection

    Hi Expert, I met issue when full loading data from R3 via customized datasource. the error message in request monitor is: Error message from the source system Diagnosis An error occurred in the source system. System Response Caller 09 contains an err

  • Harddrive noise

    i have bought new hard drive because my older one was damaged. it was making noise like beeping sometimes.  my new hard drive also makes same sometimes beeping and in my task manager sometimes it shows full 100% disk usage, mostaly when i turn on the

  • 4.2.1 created duplicate calendar entries

    My last sync duplicated all calendar events in my phone and in entourage. I can deal with fixing Entourage. is there any way to clear all calendar events in iPhone?

  • Error message "test page failed to print" in windows 7 ultimate 32 bits

    I have installed printer a hp deskjet 1515 in windows 7 ultimate 32 bits and it is successfully installed, however  when I tried to test print out there showed message "test page failed to print. Would you like to view the print troubleshooter for as

  • Why can't I open my emails by double clicking on it, I now have to use cntrl/O instead.

    Up until a few days ago I could open emails by double clicking on it. Now I have to use control/O instead. I have not changed any settings that I am aware of. What happened and how can I change it back?