Preview option in Illustrator
Is there a way to have the preview option automatically be selected when doing 3d effects, transform effects, etc. Every time I choose an option the preview xheck box has to be selected, it would be much easier if it just defaulted to it being checked to preview
By default, you can control it for some effects by editing the AIPrefs file (catchword PreviewChanges).
One might hack it further.
Similar Messages
-
Preview options in the "save for web" dialog
According to the reference, the previews in the "save for web" dialog are there only for showing how the image can be seen on various platforms with different gamma values.
But, if we open a non-sRGB image (ProPhoto for example) by the "save for web" option, the preview options (other than the "use document profile) in the "save for web" dialog assign sRGB color space to the image even when the "convert to sRGB" option is unchecked ... this causes unrealistic, dull previews for the image.
What is the reason behind that PS assigns sRGB to the image previews if we uncheck "convert to sRGB" option?Basically, how animation works with GIF and Save for Web in PSE is that each layer in your document is a frame of animation. So you see one layer, then the next, and so on. You should not see the contents of the last frame/layer when looking at the current/next frame of the animation.
Could you post a screen shot of your layers panel and give us a link to the GIF that is coming out of Save for Web? -
How can I print a whole email document and not a "screen shot" like I get in the Print Preview option. I'd like to print from "file" and print" like I can on other browsers (IE, for example). When I try to print from Firefox it grabs all my info (file folders, etc.) from the left side of the page. I need just the email information, not the entire screen information. Thank you!
-BruceI agree; I should, but I can't :) I have an orange Firefox drop down that I go to to print, and it allows me to select "print", "print preview" and "print setup", where I can change the margins. It always defaults to a full screen shot (I use Yahoo) and does not show just the email. I don't need to print what is on the left side of the screen or anything other than the email (I can achieve these things by using file-print from IE, so I know it is doable, and I am still going into Yahoo and using their email when I do it).
Hope this helps. I'm not a fan of IE, but I really don't like the print properties I'm getting here (I'm a long time Mozilla user, but I'm losing too much info with this option and can't afford that anymore).
Thanks for the help!
-Bruce -
The preview option in FCK doesn't work when using trought an external app!
Hello everyone!
I have an issue with the FCK-editor when using in an external application.
We are executing the “WCM_EDIT_DATA_FILE” service to launch the FCK contributor application in a portal (Webcenter) so we can edit datafiles. The preview option (preview butto) does not apply a region template and the content is shown in the same order as defined in the region definition. Viewing the same datafile trough Site Studio I can see that the preview option applies a region template.
I've compared the links but I am not getting anywhere.....
The links for the preview are:
Via the portal:
http://MyServer/vcc/idcplg?IdcService=SS_QD_GET_RENDITION&coreContentOnly=1&dDocName=DF_NEWS_BERLIN_8&dID=765&wcm.contributor.mode=false&IgnoreContributorOnly=true&previewId=1276003853183&WCMPopupId=POPUP09875462424653607178
Via Site Studio:
http://Myserver/VCCPOC/index.htm?wcm.contributor.mode=false&IgnoreContributorOnly=true&previewId=1275983448108&WCMPopupId=POPUP07808631203986127290
I can see that the portal link has the same parameters as the Site Studio link and some more. I even tried adding a region template in the url by adding my template as a parameter like this "&templateDocName=RT_BOUND_DETAIL_VIEW" just to force it but without any luck. The same goes for the "view differences"-button in the FCK editor.
Has anyone had this problem?
ThanksHi Stijn,
Here is the link to the SS-services:
http://download.oracle.com/docs/cd/E14571_01/doc.1111/e10615/c11_ss_services.htm#insertedID0
And here is the link to the CS-services:
http://download.oracle.com/docs/cd/E10316_01/cs/cs_doc_10/documentation/developer/services_reference_10gr3en.pdf
The name of the service that creates new data file is CHECKIN_NEW_FORM.
Saving the file from the FCKEditor makes the browser window "greyed out" so for the time being we are hitting the "go back"-button in the browser to return to the portal... as we open the editor in the same window as the portal. However, there must be another solution as this is fare away from user friendly!
Let me try to answer some of your questions:
- Are you also using the Site Studio publishing functionality (we will not)
No, we are not either.
- where will your site design be done (we'll try to do as much as we can in WebCenter to keep it all in one place; we might even just output XML with our templates from SS, and transform it in WebCenter using different "templates")
We are also planning to have it all in WebCenter. We are using SS for creating region templates and subtempalates used in the portal (Webcenter/ADF) for showing the same data files in different ways. That means that we also have elements, region definitions, placeholders and so on in the SS.
- what are you doing with inline images in the FCKEditor (we want contributors to be able to upload there images easily from the Editor, without the need to browse to UCM)
Well, for the time being the contributor must browse the some images from the CS because the images must have a certain height and width... so that is our way of controlling that the user is choosing from the approved images. When it comes to images in the text the contributors can add as many images as they want that are not from the CS. They can just copy/paste them in the editor from whatever location they want.
- is it correct that the metadata tab cannot be used in combination with profiles defined in UCM (see other thread WebCenter Content
I've heard that before so my guess is that it's true. My question then is how do I do to hide the metadata tab if I do not use it?
- will you be using the ctrl-shift-F5 functionality to edit content, or just create a link to the WCM_EDIT_... service in a popup window?
We create a link to the WCM_EDIT_... service that opens in the same window as the portal.... but as I mentioned earlier that is not the most user friendly solution so we probably must change that....
Now back to my problems:
I know why the preview trough the portal and the site studio differs.
The services that are used when previewing content trought the SS are:
SS_SET_PREVIEW_ELEMENT_DATA
SS_GET_PAGE
LOAD_DOC_ENVIRONMENT
The services that are used when previewing content trought the portal are:
SS_SET_PREVIEW_ELEMENT_DATA
SS_QD_GET_RENDITION
LOAD_DOC_ENVIRONMENT
The SS_GET_PAGE actually shows a page in SS and as soon as there is a region template attached to the page you are able to see the content the way you want. That is not the case then calling the SS_QD_GET_RENDITION service. So my question is if there is a workaround where I can force a region template to be used con conjunction with the SS_QD_GET_RENDITION service?
Anyone? All ideas are really appreciated! -
Error in SmartForm to PDF while Saving with Preview option.
Hi,
I have created a report to convert Smartform to PDF.
I want the user to Preview data, if user is interested, then they can save the file.
When user clicks the Back button in SmartForm Print Preview, user can select the path of PDF file to save the data.
My code works fine, if Preview is disabled.
In the sub-routine createpdffile, I am getting error while creating PDF file.
The program works fine, if I disable the preview option i.e. if I uncomment
cparam-getotf = 'X'.
How can I have the both options in my report?
1) Preview SmartForm.
2) Save the SmartForm as PDF.
Regards,
Vikas
DATA:
cparam TYPE ssfctrlop,
outop TYPE ssfcompop,
* fm_name TYPE rs38l_fnam,
* my_tabix TYPE sy-tabix,
file_size TYPE i,
bin_filesize TYPE i,
s_filename TYPE string.
DATA:
tab_otf_data TYPE ssfcrescl,
* tab_otf_data TYPE itcoo OCCURS 0 WITH HEADER LINE,
pdf_tab LIKE tline OCCURS 0 WITH HEADER LINE,
tab_otf_final TYPE itcoo OCCURS 0 WITH HEADER LINE,
it_ekpo TYPE STANDARD TABLE OF ekpo WITH HEADER LINE.
* it_docs TYPE STANDARD TABLE OF docs.
START-OF-SELECTION.
PERFORM fetchdata.
***************** suppressing the dialog box****************************
outop-tddest = 'LP01'.
cparam-no_dialog = 'X'.
cparam-preview = 'X'.
* cparam-getotf = 'X'.
END-OF-SELECTION.
PERFORM callsmartform.
tab_otf_final[] = tab_otf_data-otfdata[].
PERFORM createpdffile.
PERFORM getfilename.
PERFORM savepdffile.
*& Form FetchData
FORM fetchdata .
SELECT * FROM ekpo INTO CORRESPONDING FIELDS OF TABLE it_ekpo
WHERE ebeln > '4500009071' AND ebeln < '4500009073' .
ENDFORM. " FetchData
*& Form CallSmartForm
FORM callsmartform .
CALL FUNCTION '/1BCDWB/SF00000234'
EXPORTING
control_parameters = cparam
output_options = outop
user_settings = space
IMPORTING
job_output_info = tab_otf_data
TABLES
t_ekpo = it_ekpo
* EXCEPTIONS
IF sy-subrc <> 0.
MESSAGE 'Error in Calling Smart Form ' TYPE 'I'.
ENDIF.
ENDFORM. " CallSmartForm
*& Form CreatePDFFile
* text
FORM createpdffile .
****removing the initial and final markers from the OTF data**********
* DELETE tab_otf_data-otfdata WHERE tdprintcom = '//'.
* READ TABLE tab_otf_final WITH KEY tdprintcom = 'EP'.
* my_tabix = sy-tabix + 1.
******** appending the modified OTF table to the final OTF table****
* INSERT LINES OF tab_otf_data-otfdata INTO tab_otf_final INDEX my_tabix
************ converting OTF data into pdf data**************************
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
format = 'PDF'
max_linewidth = 132
IMPORTING
bin_filesize = bin_filesize
* BIN_FILE =
TABLES
otf = tab_otf_final
lines = pdf_tab
EXCEPTIONS
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE 'Error in Creating PDF File ' TYPE 'I'.
ENDIF.
ENDFORM. " CreatePDFFile
*& Form SavePDFFile
FORM savepdffile .
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
bin_filesize = bin_filesize
filename = s_filename
filetype = 'BIN'
IMPORTING
filelength = file_size
TABLES
data_tab = pdf_tab
EXCEPTIONS
OTHERS = 22
IF sy-subrc <> 0.
MESSAGE 'Error in Saving PDF File ' TYPE 'I'.
ENDIF.
ENDFORM. " SavePDFFile
*& Form GetFileName
FORM getfilename .
DATA:
v_name TYPE string,
v_path TYPE string,
v_fullpath TYPE string,
v_filter TYPE string,
v_uact TYPE i,
v_guiobj TYPE REF TO cl_gui_frontend_services.
* v_filename TYPE string.
CONCATENATE 'smrt' '.pdf' INTO v_name.
CREATE OBJECT v_guiobj.
CALL METHOD v_guiobj->file_save_dialog
EXPORTING
default_extension = 'pdf'
default_file_name = v_name
file_filter = v_filter
CHANGING
filename = v_name
path = v_path
fullpath = v_fullpath
user_action = v_uact.
IF v_uact = v_guiobj->action_cancel.
EXIT.
ENDIF.
MOVE v_fullpath TO s_filename.
ENDFORM. " GetFileNameI think the excerpt and link below is the why, but the page talks about server code and not javascript. I guessing that this is why blank pages work, but not wiki pages. Can anyone verify this?
The following are general rules for using server-side code on a site page.
If the page is uncustomized, server-side code is supported on the page.
If the page is customized, server-side code does not run, and the page does not render. This includes the code-behind for the page itself.
http://msdn.microsoft.com/en-us/library/office/aa979592(v=office.14).aspx -
Preview instead of Illustrator 10
Was working in Illustrator 10 last nite on several files and, on looking back into the project folder, found that some, but not all, of the files had a Preview icon and .pdf suffix instead of Illustrator and .ai. I definitely did not save the files as Preview nor pdf. This seems to be a random thing.
If I open the Preview file through Illustrator and re-save as an Illustrator file (.ai) the file shows up correctly as an Illustrator file.
What's up with this?? Could this be a permissions thing? Thanks for any help you can provideHi, Marcus.
This is not a permissions issue. See my "Resetting Launch Services" FAQ.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X
Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
I may receive some form of compensation, financial or otherwise, from my recommendation or link. -
Unable to set browser preview options
I posted this a few days ago and didn't get any responses, so
am trying again in case I'll have better luck today. :-)
I hope someone can help because this problem, which suddenly
occured, is makign it impossible for me to do any work in
Dreamweaver and that's driving me crazy... :-0
Thanks!
I feel a bit silly about this - but for some reason I am
unable to set the browser preview options in my preferences. I'm
using Dreamweaver 8 on a Mac OX10.3.9, and trying to designate
Firefox 1.5 as my default primary browser, and Safari 1.3.2 &
IE5 as secondary options. When I first open Dreamweaver I get a
message saying 'Unable to read Preview in Browser Preference.
Please remove all browsers form the list and add them again". So I
remove them all and when I try to add them back, none of my choices
show up in the box. Then I restart and the old ones are still
there. If I try to change the check in the box that indicates
primary or secondary browsers, my program crashes. Anyone have a
clue what's going on? Thanks so much for any help...This - file:///ether/Patricia Yenawine/images/oxblood_med.jpg
- tells me
that your local root folder is on a network shared drive. I
am guessing
that your problem stems from the fact that network
permissions/protocols are
interfering with your ability to successfully write your
cache files and
your browser preferences.
Do you have the same problem with sites that are truly local
to your
computer?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"amysue102" <[email protected]> wrote in
message
news:e48hoq$ba0$[email protected]..
> Originally posted by: Newsgroup User
> Open DW, select a site, create a new page, and insert an
image from within
> that site to insert on the page. Without saving the page
(!important)
> copy
> the code and paste it into a reply here, please.
>
> Murray,
>
> Thank you! for helping...
> I followed your direction - here's the code:
>
> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN"
> "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
> <html xmlns="
http://www.w3.org/1999/xhtml">
> <head>
> <meta http-equiv="Content-Type" content="text/html;
charset=ISO-8859-1" />
> <title>Untitled Document</title>
> </head>
>
> <body>
> <img src="file:///ether/Patricia
Yenawine/images/oxblood_med.jpg"
> width="158"
> height="115" alt="oxblood bowl" />
> </body>
> </html>
>
> May Blessings rain upon you!
>
> Amy
> -
I cannot Preview a form in Adobe LiveCycle. The Preview option is gray off.
I cannot Preview my design form in Adobe LiveCycle. The Preview option is gray off. need help
Hi,
Try repairing your default PDF handler.
You can check your default PDF handler by opening Acrobat / Reader --> edit --> preferences --> General --> Select Default PDF Handler
You can repair the application by clicking on Help--> Repair
Regards,
Ratnesh -
How to Show preview of adobe illustrator file on web browser
Hi All....
Is there any possibility to showing preview of adobe illustrator file on web browser through Flex or Flash or any other application.
If any kindly suggest me.Hi Mylenium
Thanks for all your suggestions..
While Googling on this issues I come to know that Illustrator file can be exported in XAML format with the help of a small plug-in, and that XAML file can be use in Microsoft silverlight. Then we can preview our Illustrator artwork on web browser. Also we can select each artwork (line, point, shape etc) on design view (on Microsoft Expression Blend). This is what I required.
Here is a link for Illustrator to XAML Exporter
http://drawlogic.com/category/xaml/page/2/
Thanks -
My old version of firefox had a little red firefox tab (top, left) with a pulldown menu offering print option,
then a secondary menu offering print preview option. How can I access the print preview function in
the latest version of firefox?When you use the new "3-bar" menu button, where you see the Print icon, that actually opens Print Preview. You can use Customize to move that to the main toolbar if you like.
I created a map showing where the old menu items moved in the new menu. maybe it will be useful? http://www.jeffersonscher.com/res/menu/comp.php -
Unable to find Shopping Cart Preview Option in SRM Shopping cart Applicatio
Hi Guys,
I am a testing some scenarios in SRM-MDM Catalog and SRM Shoppincart where i have to add some items from SRM-MDM Catalog to Shopping cart preview but i dont find any Shopping Cart preview option. Can any one make me clear how to know which SRM Portal User has privelege to see that Shopping Cart Preview option.
Thanks
RaviHi Ravi,
Can any one make me clear how to know which SRM Portal User has privelege to see that Shopping Cart Preview option.
This totally depends on the settings made for that User in Configuration UI.
When you open your Configuration UI with User Master and password Blank (empty), you will get screen as shown in page 24/28 Configuration view. Here you will select User e.g. User1 not Default User to whom do you want to assign Shopping Cart Preview Option by clicking on radio button Cart Preview in shopping options under General tab. Then the same user you will define in External webservice.
Please refer Page 24/28 of this below article:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/806f3d56-0d29-2d10-9abf-c0df6f0fdfe8?quicklink=index&overridelayout=true
Kindly revert with result.
Regards,
Mandeep Saini -
How do I get Adobe PDF to show up as a printer option for Illustrator?
How do I get Adobe PDF to show up as a printer option for Illustrator?
It is usually at the bottom of your printers list. Do you see it on Control Panel/Hardware and Sound/Devices and Printers/Printers?
-
hello
I own Photoshop Elements and Premier Elements but can't find a similar option for Illustrator and Dreamweaver. Are there no other possibilities for these softwares other than the monthly rental (cloud) plan?
Thanks.
Sincerely,
Bruce ScismCreative Suite 6
Mylenium -
What's the best way to get the Print Preview Option for Firefox 12.0?
Many thanks,Hi, is this the add-on that does not supported from your os ?
https://addons.mozilla.org/eN-US/firefox/addon/printprint-preview/?src=search
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem. -
When I double click a CS3 Illustrator file in finder, it opens in preview, not in Illustrator CS4.
Is anyone having this same issue?
Is there a quick and easy method to convert to CS4.
I have 4000 ads, 3,000 are from freelancers that are CS3 or CS2.
Jim EtheridgeSelect a couple of .ai files and Get Info on the files. Go to the Open with line and set it to Adobe Illustrator. When it ask if you want it to do the same for this file type answer yes. The OS is probably seeing the file as a PDF and Preview by default is set to open PDFs.
Maybe you are looking for
-
Creating a radio button group in a column of a table in Web Dynpro
Hi, I want to put a radio button group in a column of a table in Webdynpro. I added a column to a web dynpro view and then inserted a tableCellEditor for that column.. But I cannot define it as Radio Button group. I want the user to be able to select
-
To buy a new printer or new print head?
Hi, I have a canon i9100 a3 printer which is 6 years old. the print head has had it, so i need to either buy a new print head for £60, or buy a new printer and i can't decide which one would be better. I don't want to spend more than around £250 on a
-
Free Goods in Multiple Sales Orders
Hi, I have one scenario, so please help me out. If customer orders 10 items, he gets 1 item as free item. But if he orders those 10 items in more than one sales order not in single sales order then how the customer will get the 1 item as a free item?
-
Ok I have a SB000, when i run a speaker text, the center speaker has no sound, I moved the input from the left speaker and changed it with the center speaker port on back of subwoofer, sound came from speaker then but nothing came out for the left wh
-
Unable to join 3 fact tables in obiee data model.
Hi, I am unable to join the 3 fact tables in obiee rpd. If I join with 2 fact tables I got the data in repors, Once I add the one more fact table and join with related dimensions, I am getting nodata error. I am following all joins keys as per datamo