Preview option in LifecycleES 8.2.1

Up until about a week ago, when I was designing a form in Lifecycle, I could click from the design tab to the Preview PDF tab, see the PDF preview of my form, then click right back over to Design view.  Now when I click on Preview PDF, first I get a quick message like an Internet Explorer error saying "Navigation to the webpage was canceled." Then the form will open in Adobe Pro, but it's not really a preview. It is actually opening Adobe Pro. How can I get back to where I can just click back and forth between design view and preview?

While you try preview make sure that Adobe Pro services are not running in the
back ground.
Go to task manager and check .
If any instance of Adobe pro is running , please stop it.
ReV

Similar Messages

  • Preview options in the "save for web" dialog

    According to the reference, the previews in the "save for web" dialog are there only for showing how the image can be seen on various platforms with different gamma values.
    But, if we open a non-sRGB image (ProPhoto for example) by the "save for web" option, the preview options (other than the "use document profile) in the "save for web" dialog assign sRGB color space to the image even when the "convert to sRGB" option is unchecked ... this causes unrealistic, dull previews for the image.
    What is the reason behind that PS assigns sRGB to the image previews if we uncheck "convert to sRGB" option?

    Basically, how animation works with GIF and Save for Web in PSE is that each layer in your document is a frame of animation. So you see one layer, then the next, and so on. You should not see the contents of the last frame/layer when looking at the current/next frame of the animation.
    Could you post a screen shot of your layers panel and give us a link to the GIF that is coming out of Save for Web?

  • How can I print a whole email document and not a "screen shot" like I get in the Print Preview option.

    How can I print a whole email document and not a "screen shot" like I get in the Print Preview option. I'd like to print from "file" and print" like I can on other browsers (IE, for example). When I try to print from Firefox it grabs all my info (file folders, etc.) from the left side of the page. I need just the email information, not the entire screen information. Thank you!
    -Bruce

    I agree; I should, but I can't :) I have an orange Firefox drop down that I go to to print, and it allows me to select "print", "print preview" and "print setup", where I can change the margins. It always defaults to a full screen shot (I use Yahoo) and does not show just the email. I don't need to print what is on the left side of the screen or anything other than the email (I can achieve these things by using file-print from IE, so I know it is doable, and I am still going into Yahoo and using their email when I do it).
    Hope this helps. I'm not a fan of IE, but I really don't like the print properties I'm getting here (I'm a long time Mozilla user, but I'm losing too much info with this option and can't afford that anymore).
    Thanks for the help!
    -Bruce

  • The preview option in FCK doesn't work when using trought an external app!

    Hello everyone!
    I have an issue with the FCK-editor when using in an external application.
    We are executing the “WCM_EDIT_DATA_FILE” service to launch the FCK contributor application in a portal (Webcenter) so we can edit datafiles. The preview option (preview butto) does not apply a region template and the content is shown in the same order as defined in the region definition. Viewing the same datafile trough Site Studio I can see that the preview option applies a region template.
    I've compared the links but I am not getting anywhere.....
    The links for the preview are:
    Via the portal:
    http://MyServer/vcc/idcplg?IdcService=SS_QD_GET_RENDITION&coreContentOnly=1&dDocName=DF_NEWS_BERLIN_8&dID=765&wcm.contributor.mode=false&IgnoreContributorOnly=true&previewId=1276003853183&WCMPopupId=POPUP09875462424653607178
    Via Site Studio:
    http://Myserver/VCCPOC/index.htm?wcm.contributor.mode=false&IgnoreContributorOnly=true&previewId=1275983448108&WCMPopupId=POPUP07808631203986127290
    I can see that the portal link has the same parameters as the Site Studio link and some more. I even tried adding a region template in the url by adding my template as a parameter like this "&templateDocName=RT_BOUND_DETAIL_VIEW" just to force it but without any luck. The same goes for the "view differences"-button in the FCK editor.
    Has anyone had this problem?
    Thanks

    Hi Stijn,
    Here is the link to the SS-services:
    http://download.oracle.com/docs/cd/E14571_01/doc.1111/e10615/c11_ss_services.htm#insertedID0
    And here is the link to the CS-services:
    http://download.oracle.com/docs/cd/E10316_01/cs/cs_doc_10/documentation/developer/services_reference_10gr3en.pdf
    The name of the service that creates new data file is CHECKIN_NEW_FORM.
    Saving the file from the FCKEditor makes the browser window "greyed out" so for the time being we are hitting the "go back"-button in the browser to return to the portal... as we open the editor in the same window as the portal. However, there must be another solution as this is fare away from user friendly!
    Let me try to answer some of your questions:
    - Are you also using the Site Studio publishing functionality (we will not)
    No, we are not either.
    - where will your site design be done (we'll try to do as much as we can in WebCenter to keep it all in one place; we might even just output XML with our templates from SS, and transform it in WebCenter using different "templates")
    We are also planning to have it all in WebCenter. We are using SS for creating region templates and subtempalates used in the portal (Webcenter/ADF) for showing the same data files in different ways. That means that we also have elements, region definitions, placeholders and so on in the SS.
    - what are you doing with inline images in the FCKEditor (we want contributors to be able to upload there images easily from the Editor, without the need to browse to UCM)
    Well, for the time being the contributor must browse the some images from the CS because the images must have a certain height and width... so that is our way of controlling that the user is choosing from the approved images. When it comes to images in the text the contributors can add as many images as they want that are not from the CS. They can just copy/paste them in the editor from whatever location they want.
    - is it correct that the metadata tab cannot be used in combination with profiles defined in UCM (see other thread WebCenter Content
    I've heard that before so my guess is that it's true. My question then is how do I do to hide the metadata tab if I do not use it?
    - will you be using the ctrl-shift-F5 functionality to edit content, or just create a link to the WCM_EDIT_... service in a popup window?
    We create a link to the WCM_EDIT_... service that opens in the same window as the portal.... but as I mentioned earlier that is not the most user friendly solution so we probably must change that....
    Now back to my problems:
    I know why the preview trough the portal and the site studio differs.
    The services that are used when previewing content trought the SS are:
    SS_SET_PREVIEW_ELEMENT_DATA
    SS_GET_PAGE
    LOAD_DOC_ENVIRONMENT
    The services that are used when previewing content trought the portal are:
    SS_SET_PREVIEW_ELEMENT_DATA
    SS_QD_GET_RENDITION
    LOAD_DOC_ENVIRONMENT
    The SS_GET_PAGE actually shows a page in SS and as soon as there is a region template attached to the page you are able to see the content the way you want. That is not the case then calling the SS_QD_GET_RENDITION service. So my question is if there is a workaround where I can force a region template to be used con conjunction with the SS_QD_GET_RENDITION service?
    Anyone? All ideas are really appreciated!

  • Error in SmartForm to PDF while Saving with Preview option.

    Hi,
    I have created a report to convert Smartform to PDF.
    I want the user to Preview data, if user is interested, then they can save the file.
    When user clicks the Back button in SmartForm Print Preview, user can select the path of PDF file to save the data.
    My code works fine, if Preview is disabled.
    In the sub-routine createpdffile, I am getting error while creating PDF file.
    The program works fine, if I disable the preview option i.e. if I uncomment
    cparam-getotf = 'X'.
    How can I have the both options in my report?
    1)     Preview SmartForm.
    2)     Save the SmartForm as PDF.
    Regards,
    Vikas
    DATA:
      cparam TYPE ssfctrlop,
      outop TYPE ssfcompop,
    *  fm_name TYPE rs38l_fnam,
    *  my_tabix TYPE sy-tabix,
      file_size TYPE i,
      bin_filesize TYPE i,
      s_filename TYPE string.
    DATA:
      tab_otf_data TYPE ssfcrescl,
    *  tab_otf_data TYPE itcoo OCCURS 0 WITH HEADER LINE,
      pdf_tab LIKE tline OCCURS 0 WITH HEADER LINE,
      tab_otf_final TYPE itcoo OCCURS 0 WITH HEADER LINE,
      it_ekpo TYPE STANDARD TABLE OF ekpo WITH HEADER LINE.
    *  it_docs  TYPE STANDARD TABLE OF docs.
    START-OF-SELECTION.
      PERFORM fetchdata.
    ***************** suppressing the dialog box****************************
      outop-tddest = 'LP01'.
      cparam-no_dialog = 'X'.
      cparam-preview = 'X'.
    *  cparam-getotf = 'X'.
    END-OF-SELECTION.
      PERFORM callsmartform.
      tab_otf_final[] = tab_otf_data-otfdata[].
      PERFORM createpdffile.
      PERFORM getfilename.
      PERFORM savepdffile.
    *&      Form  FetchData
    FORM fetchdata .
      SELECT * FROM ekpo INTO CORRESPONDING FIELDS OF TABLE it_ekpo
      WHERE ebeln >  '4500009071' AND ebeln  < '4500009073' .
    ENDFORM.                    " FetchData
    *&      Form  CallSmartForm
    FORM callsmartform .
      CALL FUNCTION '/1BCDWB/SF00000234'
      EXPORTING
      control_parameters         =  cparam
        output_options             = outop
        user_settings              = space
      IMPORTING
        job_output_info            = tab_otf_data
      TABLES
           t_ekpo                     = it_ekpo
    * EXCEPTIONS
      IF sy-subrc <> 0.
        MESSAGE  'Error in Calling Smart Form ' TYPE 'I'.
      ENDIF.
    ENDFORM.                    " CallSmartForm
    *&      Form  CreatePDFFile
    *       text
    FORM createpdffile .
    ****removing the initial and final markers from the OTF data**********
    *  DELETE tab_otf_data-otfdata WHERE tdprintcom = '//'.
    *  READ TABLE tab_otf_final WITH KEY tdprintcom = 'EP'.
    *  my_tabix = sy-tabix + 1.
    ******** appending the modified OTF table to the final OTF table****
    * INSERT LINES OF tab_otf_data-otfdata INTO tab_otf_final INDEX my_tabix
    ************ converting OTF data into pdf data**************************
      CALL FUNCTION 'CONVERT_OTF'
      EXPORTING
      format = 'PDF'
      max_linewidth = 132
      IMPORTING
      bin_filesize = bin_filesize
    * BIN_FILE =
      TABLES
      otf = tab_otf_final
      lines = pdf_tab
      EXCEPTIONS
      OTHERS = 5
      IF sy-subrc <> 0.
        MESSAGE  'Error in Creating PDF File ' TYPE 'I'.
      ENDIF.
    ENDFORM.                    " CreatePDFFile
    *&      Form  SavePDFFile
    FORM savepdffile .
      CALL FUNCTION 'GUI_DOWNLOAD'
      EXPORTING
      bin_filesize = bin_filesize
      filename = s_filename
      filetype = 'BIN'
      IMPORTING
      filelength = file_size
      TABLES
      data_tab = pdf_tab
      EXCEPTIONS
      OTHERS = 22
      IF sy-subrc <> 0.
        MESSAGE  'Error in Saving PDF File ' TYPE 'I'.
      ENDIF.
    ENDFORM.                    " SavePDFFile
    *&      Form  GetFileName
    FORM getfilename .
      DATA:
        v_name                  TYPE string,
        v_path                  TYPE string,
        v_fullpath              TYPE string,
        v_filter                TYPE string,
        v_uact                  TYPE i,
        v_guiobj                TYPE REF TO cl_gui_frontend_services.
    *    v_filename              TYPE string.
      CONCATENATE 'smrt' '.pdf' INTO v_name.
      CREATE OBJECT v_guiobj.
      CALL METHOD v_guiobj->file_save_dialog
        EXPORTING
          default_extension = 'pdf'
          default_file_name = v_name
          file_filter       = v_filter
        CHANGING
          filename          = v_name
          path              = v_path
          fullpath          = v_fullpath
          user_action       = v_uact.
      IF v_uact = v_guiobj->action_cancel.
        EXIT.
      ENDIF.
      MOVE v_fullpath TO s_filename.
    ENDFORM.                    " GetFileName

    I think the excerpt and link below is the why, but the page talks about server code and not javascript.  I guessing that this is why blank pages work, but not wiki pages.  Can anyone verify this?
    The following are general rules for using server-side code on a site page.
    If the page is uncustomized, server-side code is supported on the page.
    If the page is customized, server-side code does not run, and the page does not render. This includes the code-behind for the page itself.
    http://msdn.microsoft.com/en-us/library/office/aa979592(v=office.14).aspx

  • Unable to set browser preview options

    I posted this a few days ago and didn't get any responses, so
    am trying again in case I'll have better luck today. :-)
    I hope someone can help because this problem, which suddenly
    occured, is makign it impossible for me to do any work in
    Dreamweaver and that's driving me crazy... :-0
    Thanks!
    I feel a bit silly about this - but for some reason I am
    unable to set the browser preview options in my preferences. I'm
    using Dreamweaver 8 on a Mac OX10.3.9, and trying to designate
    Firefox 1.5 as my default primary browser, and Safari 1.3.2 &
    IE5 as secondary options. When I first open Dreamweaver I get a
    message saying 'Unable to read Preview in Browser Preference.
    Please remove all browsers form the list and add them again". So I
    remove them all and when I try to add them back, none of my choices
    show up in the box. Then I restart and the old ones are still
    there. If I try to change the check in the box that indicates
    primary or secondary browsers, my program crashes. Anyone have a
    clue what's going on? Thanks so much for any help...

    This - file:///ether/Patricia Yenawine/images/oxblood_med.jpg
    - tells me
    that your local root folder is on a network shared drive. I
    am guessing
    that your problem stems from the fact that network
    permissions/protocols are
    interfering with your ability to successfully write your
    cache files and
    your browser preferences.
    Do you have the same problem with sites that are truly local
    to your
    computer?
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "amysue102" <[email protected]> wrote in
    message
    news:e48hoq$ba0$[email protected]..
    > Originally posted by: Newsgroup User
    > Open DW, select a site, create a new page, and insert an
    image from within
    > that site to insert on the page. Without saving the page
    (!important)
    > copy
    > the code and paste it into a reply here, please.
    >
    > Murray,
    >
    > Thank you! for helping...
    > I followed your direction - here's the code:
    >
    > <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
    Transitional//EN"
    > "
    http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
    > <html xmlns="
    http://www.w3.org/1999/xhtml">
    > <head>
    > <meta http-equiv="Content-Type" content="text/html;
    charset=ISO-8859-1" />
    > <title>Untitled Document</title>
    > </head>
    >
    > <body>
    > <img src="file:///ether/Patricia
    Yenawine/images/oxblood_med.jpg"
    > width="158"
    > height="115" alt="oxblood bowl" />
    > </body>
    > </html>
    >
    > May Blessings rain upon you!
    >
    > Amy
    >

  • I cannot Preview a form in Adobe LiveCycle. The Preview option is gray off.

    I cannot Preview my design form in Adobe LiveCycle. The Preview option is gray off. need help

    Hi,
    Try repairing your default PDF handler.
    You can check your default PDF handler by opening Acrobat / Reader --> edit --> preferences --> General  --> Select Default PDF Handler
    You can repair the application by clicking on Help--> Repair
    Regards,
    Ratnesh

  • The old version of firefox had print preview option - how can i do this in the latest firefox update?

    My old version of firefox had a little red firefox tab (top, left) with a pulldown menu offering print option,
    then a secondary menu offering print preview option. How can I access the print preview function in
    the latest version of firefox?

    When you use the new "3-bar" menu button, where you see the Print icon, that actually opens Print Preview. You can use Customize to move that to the main toolbar if you like.
    I created a map showing where the old menu items moved in the new menu. maybe it will be useful? http://www.jeffersonscher.com/res/menu/comp.php

  • Unable to find Shopping Cart Preview Option in SRM Shopping cart Applicatio

    Hi Guys,
            I am a testing some scenarios in SRM-MDM Catalog and SRM Shoppincart where i have to add some items from SRM-MDM Catalog to Shopping cart preview but i dont find any Shopping Cart preview option. Can any one make me clear how to know which SRM Portal User has privelege to see that Shopping Cart Preview option.
    Thanks
    Ravi

    Hi Ravi,
    Can any one make me clear how to know which SRM Portal User has privelege to see that Shopping Cart Preview option.
    This totally depends on the settings made for that User in Configuration UI.
    When you open your Configuration UI with User Master and password Blank (empty), you will get screen as shown in page 24/28 Configuration view. Here you will select User e.g. User1 not Default User to whom do you want to assign Shopping Cart Preview Option by clicking on radio button Cart Preview in shopping options under General tab. Then the same user you will define in External webservice.
    Please refer Page 24/28 of this below article:
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/806f3d56-0d29-2d10-9abf-c0df6f0fdfe8?quicklink=index&overridelayout=true
    Kindly revert with result.
    Regards,
    Mandeep Saini

  • Hi - I'm looking for a Print Preview Option for Firefox 12.0 for a Mac? I've found a link for a icon add-on, but it says its not support for my version.

    What's the best way to get the Print Preview Option for Firefox 12.0?
    Many thanks,

    Hi, is this the add-on that does not supported from your os ?
    https://addons.mozilla.org/eN-US/firefox/addon/printprint-preview/?src=search
    thank you
    Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

  • My numbers program created on my mac version 3.0 won't work on my ipad version 2.0. It says I have to save the file with preview option but there is no such option in preferences. Any thoughts?

    my spreadsheet created with numbers program version 3.0 created on my mac won't work on my ipad version 2.0. It says I have to save the file with preview option but there is no such option in preferences. Any thoughts?

    For the update to run Aperture must be installed in the system Application folder and named simply Aperture, not Aperture3.2.2 or anything else.
    I don't know if this would also affect photo stream but if your Aperture is misnamed or installed in an incorrect location fixing that to see if it clears up the problem would be a good first step.

  • Preview option grayed out in infopackage!

    Hi,
    iam uploading hierarchy from flat file!
    and preview option in info package is grayed out!
    what could be the reason for this?
    is it something wrong? am getting error also when i schedule the info package!
    Any suggestions?
    Thanks,
    Ravi

    Thank you all for ur answers!
    yes i did enter file type as CSV file, data separator as , ( comma ) and escape sign as 0027 ( with check box checked ). and my falt file is Excel sheet.
    of course i had selected hierarchy name in the selection tab which i had created and named in Hierarchy structure button in transfer rules!
    and i am getting the error : "syntax error RSTMPL9C, 80 row"after scheduling the info package!
    i had searched this error here in SDN, google, & also in SAP notes!
    it seems to be a support pacakge program error! the notes i ahd found were pertaining to the SAP BW 3.0 or 3.1 version.
    but we are now NW 04 platform 3.5 version!
    Pls suggest me what can be done !
    Thanks,
    Ravi

  • LiveCycle 8 Designer (PDF Preview Option)

    We're finding that any form we open/design that the function under View -> Preview PDF is grayed out.
    I've read several KB articles on this issue and found that any changes under File -> Form Properties -> Defaults then adjusted the Preview options do not effect this or any other form.
    Any ideas?
    Scott

    I got it to work!!!
    Thanks Mohit and Pam_A for your support.
    The Adobe support people directed me to some instructions to do manual removals of stray files and registry items that were lingering from old installations of Reader and Acrobat. After that I did a clean install and it worked!
    Here is a list of files that helped me, for others that may have this problem:
    "The Display PDF in Browser option controls the Preview Tab from within LiveCycle Designer. It is possible that there are Adobe Reader® registry keys that are left over controlling the preview tab and
    causing it not to load.
    Depending on what version of Adobe Reader you had installed, you will
    want to do the instructions on the following documents:
    Adobe Reader 8.x
    http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=kb400769
    Adobe Reader 7.x
    http://kb.adobe.com/selfservice/viewContent.do?externalId=kb400728
    Adobe Reader 6.x
    http://kb.adobe.com/selfservice/viewContent.do?externalId=327675
    <(>&<)>sliceId=1
    Acrobat Reader 5.x
    http://kb.adobe.com/selfservice/viewContent.do?externalId=327928
    The most important parts of these documents are the registry removal
    sections. Be sure to delete the registry keys as instructed in these
    documents."

  • Can anyone please tell me how to stop email previews from appearing on my screen. I have turned off the preview option in settings on both my ipad and iphone, but they still keep appearing.  Thanks

    Can anyone please tell me how to stop email previews from appearing on my screen. I have turned off the preview option in settings on both my ipad and iphone, but they still keep appearing.  Thanks

    works ok on mine - (5, 7.1.1).  Try again.  with previews set to none, mine shows the sender and the subject line only.  (you cannot get rid of the subject)    with the other settings, you get the sender, subject line and however many lines you selected.

  • Print preview option for Check printing (Tcode-fbz5)

    Can any one tell me from where i can see the print preview option with out giving the check print every time.

    Hi,
    In the Output Control block in FBZ5, check the Test printout Option, An overview list will be generated, click on that, it will take you to spool requese, there when u click on the document under Type, u can see the preview..
    But the spool request created should be deleted manually if you dont want to take the printout, if you want the printout u can print it from the spool itself..
    Hope you get it..
    Regards,
    Pradhiba

Maybe you are looking for