Preview Outlook2013 does not work on RDS2012R2 terminal server

Hi.
I am IT manager for a new RDS 2012R2 environmnet with 2 terminal servers running MS Office Professsional Plus 2013 SP1 Norwegian.
The main problem :
Previewing of word/excel/powerpoint file attachments in Outlook2013 does not work on these 2 RDS2012R2 terminal servers.
The excel error is telling me the following message:
"Cannot preview this file because an error occured in the following preview program: Previewing in Microsoft Excel"
Previewing is OK functioning with file explorer but not with Outlook2013 consistently.
I have updated both 2 RDS 2012R2 TS servers with the newest Windows Updates for Office 2013 and OS as well.
I tried several times to rin repair of the Office Pro Plus 2013 installation with reboots with no positiv soultion to this preview problem.
I searched the Internet/Google for hours without any luck anf here is some of the URS I have tried so far:
http://answers.microsoft.com/en-us/office/forum/office_2013_release-outlook/outlook-2013-cant-preview-word-excel-files/18c6b2da-17a0-4079-8694-d7aa0f7dfaee
http://answers.microsoft.com/en-us/office/forum/excel/outlook-2013-excel-attachment-error-microsoft/af38d448-0fa0-4b0b-a42b-60a1c58746e5
http://answers.microsoft.com/en-us/office/forum/outlook/please-help-this-file-cannot-be-previewed-because/ca25f299-d216-4e23-a99b-f0595552063d
Outlook 2013 excel attachment error: microsoft excel cannot open or save any more documents because there is not enough
available memory or disk space
http://superuser.com/questions/762773/this-file-cant-be-previewed-because-of-an-error-in-the-microsoft-word-previewe
http://superuser.com/questions/554327/outlook-2013-email-attachment-previewer-sometimes-stops-working
http://community.spiceworks.com/topic/386255-office-2013-word-excel-unable-to-preview-files
This is a major problem and I am very thankful for
a 100% accurate answer and solution
to this preview headache.. :-)
Regards
[email protected]
mvh Kenneth Knudsen MCSE 2003 HP ASE

Hi,
Thank you for posting in Windows Server Forum.
Might possible that DCOM permission got changed and to verify that you can check following steps.
Go to start, then run. Type dcomcnfg and push o.k. Component Services should come up.
Expand Component Services, click on Computers, then "Right click" on My Computer and go to "properties".
Click on Default Properties tab, and make sure the following is set:
Default Authentication Level: Should say Connect, not "None"
And Default Impersonation Level: SHould say Identify.
When those are set properly, hit ok and turn on your protected mode back on your Office applications.
In addition to this, please check whether you find any information from event log for this case. Also try to add Builtin users to grant read, write and execute persmission.
Hope it helps!
Thanks.
Dharmesh Solanki

Similar Messages

PDF Preview Handler does not work

Hello,
We installed Outlook 2010 on a new Windows 7 32bit machine with Acrobat Reader X.
The preview handler for PDF files does not work in Outlook 2010. Reader works fine by itself.
If I uninstall Reader X and install verison 9.3 then the Preview Handler works fine. Any suggestioers? I have run the repoair on Office and reinstalled Reader X again but to no avail.
- Neil

No i didnt check for office updates.. however i did locate a fix. I am not usually keen to try random fixes so i tested it solo first to confirm it was legitimate. worked fine. http://www.pretentiousname.com/adobe_pdf_x64_fix/
Thank you for attempting to help me though.
Regards,
Will

Applet does not work with a proxy server.URgent

Hi,
I have an asp page being hosted from a IIS server.
The asp page has an applet which gets data from a server side component which is hosted as a service on the server side.For connection to the server I am using URLConnection object and trying to connect over a TCP connection.
The problem occurs when I use an proxy in the middle.
I have changed the browser settings to include the proxy.
The following is the error I recieve:
Full :http://172.25.11.63:4590/
<-------------------------------->
OPening input stream
in Run ::::
ERROR: Created data socket but can't open stream on
it.172.25.11.63:4590//
172.25.11.63:4590//
java.io.FileNotFoundException: 172.25.11.63:4590//
 at com/ms/net/wininet/http/HttpInputStream.connect
 at com/ms/net/wininet/http/HttpInputStream.<init>
 at com/ms/net/wininet/http/HttpURLConnection.createInputStream
 at com/ms/net/wininet/WininetURLConnection.getInputStream
 at TalkClientApplet.rendezvous
 at TalkClientApplet.actionPerformed1
 at TalkClientApplet.start
 at com/ms/applet/AppletPanel.securedCall0
 at com/ms/applet/AppletPanel.securedCall
 at com/ms/applet/AppletPanel.processSentEvent
 at com/ms/applet/AppletPanel.run
 at java/lang/Thread.run
...Disconnecting.
Following is my code.
url = new URL("http://" + host +":"+i);
urlconnection = url.openConnection();
urlconnection.setDoOutput(true);
urlconnection.setDoInput(true);
System.out.println("Successfully opened the URL connection at " + "http://" + host + ":" + i );
 System.out.println ("Protocol: " + url.getProtocol());
 System.out.println ("Host :" + url.getHost());
 System.out.println ("Port :" + url.getPort());
 System.out.println ("File :" + url.getFile() );
 System.out.println ("Full :" + url.toExternalForm());
 System.out.println ("<-------------------------------->");
os = new BufferedWriter(new OutputStreamWriter(urlconnection.getOutputStream()));
System.out.println("OPening input stream ");
// is = new DataInputStream(urlconnection.getInputStream());
 System.out.println(urlconnection.getInputStream());
is = new DataInputStream(urlconnection.getInputStream());
The exact place where I get the error is whn i call URLConnection.openInputStream().
Usually this error comes with a malformed URL.But the same code words without a proxy.Also I am not making any changes to my code in both scenarios that is with or without proxy.
Please help.This is urgent and a showstopper

Thanks for your nice solution, but unfortunatelly it does not work with lines longer than 100 chars with Netscape. It works fine with IE and appletviewer too.
Example:
I use this code:
try {
 URL url = new URL(protocol,hostName,portNumber,URLstring);
 InputStream in = url.openStream();
 BufferedInputStream bis = new BufferedInputStream(in);
 StringBuffer input = new StringBuffer(60);
 int c;
 while ((c = bis.read()) != -1){
 System.out.print((char)c);
 input.append((char)c);
 bis.close();
 dataFromServer = input.toString();
 catch(Exception ex) {
 ex.printStackTrace();
 }I use input file test.html with exactly 100 chars ('a')
Netscape Java Console:
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaadataFromServer : aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaI use input file test.html with exactly 101 chars ('a')
Netscape Java Console:
?JL?yyxk?cedataFromServer : ?

Dreamweaver CS5 ftp does not work after my host server was updated

I'm on an iMac running Mavericks.
I'm using Dreamweaver CS 5.5 from the creative suite.
Suddenly the FTP function in Dreamweaver does not work.
My website host stated that they were forced to upgrade their server software for FTP and the Dreamweaver was not compatible.
Will there be an upgrade soon to resolve the problem? I'm having to use Filezilla to upload/download files from my site and it's a real pain compared to just using Dreamweaver.
Please help ASAP! Thanks.
Marcus

DWCS5.5 hasn't received an update in years and is no longer supported by Adobe. The chances of there being an update for any new compatibility issue is pretty much slim to none.
If (and it's a big if) your hosting company actually did something that made DW itself incompatible with the server, you would just have to use some other FTP program, like the free Filezilla client, to do your uploads.
Not a big deal, just a small extra step.

FMLE does not work publishing though AMS server connection succeeds

Hello Adobe Support,
Using Adobe Media Server we've run into a problem.
Occasionally "FlashMediaLiveEncoder does not work on publishing, though AMS server connection succeeds."
As soon as clients are connected to AMS, they get disconnected and cannot publish a stream.
After restarting AMS (command: "/opt/adobe/ams/amsmgr server ams restart") it comes back to normal.
Seems amscore hangs up for a while.
AMS version: 5.0.6 r9003 x64
OS: Amazon Linux 6.3
core.00.log below:
2015-01-08      00:53:44        22267   (i)2581247      Core (22267) disconnected from edge.    -
#Date: 2015-01-08#Fields: date   time    x-pid   x-status        x-ctx   x-comment
2015-01-08      00:53:44        6153    (i)2581247      Core (6153) disconnected from edge.     -
2015-01-08      00:54:01        22267   (e)2581279      Assert failed in tincan/util/TCAsyncIO.cpp line 1948    -
We've found two amscores exist in 'ps auwxff' like below when this problem happens. Does this matter?:
Sl 2014 4:32 ./amsmaster -console
Sl 2014 6:07 \_ /opt/adobe/ams/amsedge -edgeports :1936 -coreports 127.0.0.1:19350 -conf /opt/adobe/ams/conf/Server.xml -adaptor _defaultRoot_ -name _defaultRoot__edge1 -edgename edge1
Sl 2014 272:07 \_ /opt/adobe/ams/amscore -adaptor _defaultRoot_ -vhost _defaultVHost_ -app -inst -tag _1 -console -conf /opt/adobe/ams/conf/Server.xml -name _defaultRoot_:_defaultVHost_:::_1
Sl Jan04 1:36 \_ /opt/adobe/ams/amscore -adaptor _defaultRoot_ -vhost _defaultVHost_ -app -inst -tag _2 -console -conf /opt/adobe/ams/conf/Server.xml -name _defaultRoot_:_defaultVHost_:::_2
After restarting AMS only one core exists:
Sl 2014 4:32 ./amsmaster -console
Sl 2014 6:07 \_ /opt/adobe/ams/amsedge -edgeports :1936 -coreports 127.0.0.1:19350 -conf /opt/adobe/ams/conf/Server.xml -adaptor _defaultRoot_ -name _defaultRoot__edge1 -edgename edge1
Sl 2014 272:23 \_ /opt/adobe/ams/amscore -adaptor _defaultRoot_ -vhost _defaultVHost_ -app -inst -tag _1 -console -conf /opt/adobe/ams/conf/Server.xml -name _defaultRoot_:_defaultVHost_:::_1
pstack of one ams process:
0bin - encrypted pastebin
amscheck tool log. It returns code 64512 "Operation timed out":
0bin - encrypted pastebin
We have gcore files for each amscore process.
Let us know if you want them for investigation.
We want to solve this problem ASAP.
Do you have any idea what is happening here? Any advice would be helpful.
Thanks,
Yusuke

Hello everyone,
anyone have any idea what is happening here?

In printing a document my preview mode does not work??

in printing a mail recieved message my preview mode sends a message stating Preview is not supported???

I have paid the full extended version, but it is not working. See my screenshots.

Menu Parameter does not work with MS SQL Server

I need to create a “Menu Parameter” from a “List of Values supporting "All" and multiple selection. This parameter happens to be a list of funds. The DB is SQL Server.
We have a stored function that takes a comma separated list of funds as a parameter. SQL Server 2005 does not support array lists as bind parameters to stored procs/functions so we do not have a choice.
The Menu parameter is effectively a bind parameter but I cannot use it directly due to the sql server limitation mentioned above. I really only have 2 choices:
1) Oracle could generate the comma separated list like many BI tools do. This does not seem to be an option but it could not hurt to ask is this is available.
2) Convert the bind variable to a comma separated list prior to passing it into the function. This is what I have tried to do below. This also has a problem in that the @liststr variable goes out of scope during execution. I see the error in the BIPublisher logs. This query works fine in Toad and Aqua Data Studio but fails when I run the report complaining about an undefined variable @liststr.
- Convert bind variable to comma separated list of values
DECLARE @listStr VARCHAR(MAX)
SET @liststr =
SELECT COALESCE ( COALESCE(@listStr+',' ,'') + fgcode , @listStr)
FROM FundGroup where fgcode in ('AOMF ALL')
- Pass the csv into the function
select *
from PeriodPNLNoNAV('1/1/2012', '1/31/2012', @listStr, '')
order by fgdesc

Hi Martin.
I try to resolve this problem ( sqlserver masking) but I can't found the OBE mentioned.
You or anyone have examples about masking MS SQLServer, because in the Oracle documentation suggest that is possible but not "how do it", except the use of heterogeneous services.
Thanks in advance.
D.

Windows Explorer Preview pane does not work with .docx files

This question follows on from previously unresolved questions posted on this forum (see http://social.technet.microsoft.com/Forums/en-US/aec7b30a-0709-4d54-b5c7-570dc5b115df/preview-pane-and-windows-explorer?forum=officeitproprevious) and another forum I
have visited.
The problem:
In windows explorer scrolling down (using mouse or arrow keys) in the library pane from one file to the next stops at a word document with more than 2 pages. Instead of continuing to scroll through the file list in the library pane it switches to scrolling
through the pages of the document in the preview pane. This is a major pain because it impedes being able to move quickly through the files within a folder.
The logical way this should work is to always scroll within the library pane unless you click in the preview pane to scroll through the document preview. This isn't how it is working.
I am using Windows 7 with Microsoft Office 2010.
Can someone please provide give me a solution.
http://social.technet.microsoft.com/Forums/en-US/aec7b30a-0709-4d54-b5c7-570dc5b115df/preview-pane-and-windows-explorer?forum=officeitproprevious

Hi,
I did a test on my machine, couldn't reproduce this issue.
There doesn't seem to be any settings on Office to change that; anyway, please try repairing Office in Control Panel to try again.
Since it may be an issue more related to Windows Client, I suggest you post this question in Windows Client forum:
http://social.technet.microsoft.com/Forums/windows/en-us/home?category=w7itpro
Regards,
Melon Chen
TechNet Community Support

Client-cert auth impl in web.xml does not work in Oracle Application Server

Hi,
I am new to implementing security features on the web applications.. I have developed a new web service using jdev1012 and deployed in OAS 10.1.2. Its working fine according to the business requirements, but I am in need of implementing client-cert authentication to enable the web service available to only those who have client certificate.
My server details are:
Oracle Application Server 10g Release 2 (10.1.2)
Server certificate is in place and SSL mode have been already enabled.. able to access my web service through https://<mydomain.com>/myws/TreqWS as well able to see the WSDL file through https://<mydomain.com>/myws/TreqWS?WSDL.
I tried to include the following in my web.xml file as part of implementing CLIENT-CERT authentication.
<security-constraint>
<display-name>SecurityConstraint</display-name>
<web-resource-collection>
<web-resource-name>WSCollection</web-resource-name>
<url-pattern>/*</url-pattern>
</web-resource-collection>
<user-data-constraint>
<transport-guarantee>CONFIDENTIAL</transport-guarantee>
</user-data-constraint>
</security-constraint>
<login-config>
<auth-method>CLIENT-CERT</auth-method>
<realm-name>WSCollection</realm-name> 
</login-config>
It is not woking as expected, though I have restarted my oc4j container after including this content to the web.xml file. i.e, I am able to invoke the web service though my sample java client program, though I donot have client certificate/keystore.
I believe I am missing something..Can anyone help me in this regard to implement CLIENT-CERT authentication successfully?
Thanks,
Ms

I am having the same problem with doc and xsl. I have added this
<mime-mapping>
<extension>xls</extension>
<mime-type>application/vnd.ms-excel</mime-type>
</mime-mapping>
<mime-mapping>
<extension>doc</extension>
<mime-type>application/msword</mime-type>
</mime-mapping>
to my web.xml. I even restarted the server. I still see doc and xsl in binary.
Is there some other setting that needs to take place?
I am using WL6.1 with fixpack 1.
I can see the doc and excel files in the browser if I don't go through the weblogic
server. That just confirms it's not my browser.
Kumar Allamraju <[email protected]> wrote:
<!doctype html public "-//w3c//dtd html 4.0 transitional//en">
<html>
It works fine for me in 6.1 SP1.
 
If the following doesn't work , can you
 try application/winword instead of application/msword?
--
 Kumar
Siming Mu wrote:
<blockquote TYPE=CITE>Hi,
I setup in my web.xml a mime mapping as follows,
<mime-mapping>
 <extension>doc</extension><mime-type>application/msword</mime-type>
 </mime-mapping>
When I specify a test.doc url, the doc file appears in my browser
as
binary data
 instead of download.
Please reference change request 055002, which decribes this problem.
According
 to edocs, it has been fixed in wls6.1sp1.
But I am seeing it fixed. Am I doing anything wrong? Thanks.
Siming</blockquote>
</html>

Reader X does not work as an OLE server?

I updated Reader 9 to X and noticed that I cannot embed PDF documents any more into another application (for example in MS Word I used Insert -> Object -> From File). With Reader 9 everything worked fine.
I have tried to embed PDF files using several applications and I have used Windows XP and 7 and the result is same. I do not have English Windows available so I cannot provide exact error message.
Is this bug or is OLE server functionality really removed from Reader?

Nice to hear that this is actually a bug. Otherwise we would have been in trouble...
I advice our customers to wait until next Reader update and not to turn off that setting permanently.

Sharepoint 2013 - Share site invitation email does not work?

Hi,
Recently upgraded to SharePoint 2013, but the share website / invitation feature does not work. From the server I can telnet over port 25. The AV is not blocking, nor the Firewall. The IP is allowed over HubRelay for Exchange.
I've been through this article:
http://technet.microsoft.com/en-gb/library/cc263462.aspx#section2
Any ideas? Thanks, Matt.

Yes, where is it? At least give full explanation before marking your answer as answer by yourself.
Adit

Wldeploy : redeployment does not work

Hi,
I would like to redeploy only a specific JSP. So I tried something like this:
<wldeploy name="NS Lookup" verbose="true"
 user="${wls.user}" password="${wls.password}"
 action="redeploy" debug="true"
 adminurl="t3://${wls.host}:${wls.port}"
 targets="${wls.server.name}"
 deltafiles="WebApp/nslookup.jsp">
</wldeploy>However I don't get any error the jsp has not been deployed on the server (Timestamp remains the same).
I use the split directory structure which looks like:
sources/
 WebApp/
 WEB-INF/
 nslookup.jsp
build/
dist/
 myEar/
 WEB-INF/
 nslookup.jspTo deploy I use following task:
<wldeploy name="NS Lookup"
 user="${wls.user}" password="${wls.password}"
 action="deploy" source="${dist}/${ear}"
 upload="true" stage="nostage"
 adminurl="t3://${wls.host}:${wls.port}"
 targets="${wls.server.name}" /> Moreover I would like to know if it is possible to redeploy jsp for example without loosing the http session.
Many thanks in advance
Best regards
Steve
Edited by ze_key at 01/30/2007 6:06 AM

Hi,
I found the solution : I had to remove upload="true" from the deploy task.
Redeploy does not work with a remote server although I didn't find anything in the doc regarding this issue.
Does anyone knows a workaround to be able to redeploy on a remote server ?
Many thanks in advance
Steve

Scrolling in Preview does not work after update?

Hi everyone,
I have recently updated my MacBook Pro (bought in 2011) to Maverix OS X 10.9.1 and ever since had problems with the Preview app.
Whenever I open a PDF no matter what size with Preview I cannot use the trackpad to scroll down.
It's not a fault in the trackpad since I can move the mouse and scroll in the sidebar and any other apps, simply not when I move the mouse over the PDF and want to scroll down.
<edit> This is all the time! I have read dicussions where people had a problem with the trackpad not scrolling for 1-2seconds and then it's working again. Mine just does not work period. It never has unfortunately. <edit>
I have enabled 'Continuous Scroll' in preferences and tried several other solutions I could find in this community (e.g. System Preferences -> Trackpad -> Change setting to 'with inertia'; that option was not available in my preferences) and I just don't seem to be able to solve this problem.
I have also tried to set the preferences for 'Show Scrollbar' to 'always' (which had been suggested by one user). The scrollbar dows show up and I can click and drag the bar und thus the pages but it did not change my problem with the two-finger-touch-scroll on the trackpad.
It's really bugging me since the only way I can scroll down is using the down-arrow constantly which is incredibly annoying.
Anyone got any ideas? The same problem? A solution even?
Thanks for your help!!!
Cheers
haiviva

There's a few possibilities then.
1) Startup to your Leopard installation disk. Don't reinstall the OS, just choose Disk Utility from the menu bar when you can. Once Disk Utility is running, choose your hard drive and click on Repair Disk. If any errors are indicated, keep running Repair Disk until it says everything is okay. If you can't repair the errors (if any) after a few tries, you'll need something much better suited to the task. Most people rely on Disk Warrior.
2) If the drive has no errors, remain booted to the Leopard installation disk. Without leaving Disk Utility, on the same hard drive, run Repair Permissions.
You can do both of these steps from an external hard drive if you have Leopard installed on it. Boot to the external drive and run the same two first steps. DO NOT use Tiger or Panther. Running Repair Permissions from the wrong level of OS X will cause a lot of headaches.
3) If you still can't change file associations, then try dumping the Launch Services Database. This is the file which controls what file types are tied to which applications. OnyX is one such utility that can delete the database for you. Be careful with this utility. It can do a lot of different things, so only do what you need to at this point. Also make sure to download the version for Leopard. Once you have Onyx, launch the app and type in your admin password. Click on the Maintenance heading. Turn on the check box at the top for "LaunchServices". Make sure all other check boxes are off and click the "Execute" button. Onyx should tell you to restart. Do not skip restarting".
Now try changing any file associations. If it still doesn't work, the OS may be damaged. It's not uncommon for a damaged system to appear okay until after you install a large package like CS4. If that's the case, then perform an Archive and Install from the Leopard installation disks. Make sure to choose the option to preserve your settings.

Adobe thumbnail preview does not work in adobe acrobat 8.0

Hi ,
I have user login using his profile and suddenly his not able to view thumbnail preview of PDF file using navigation panel but the thumbnail preview
work in administrator profile.
Si, I guess some settings blocking in user profile to view thumbnail preview.
I have checked the settings that I know but it still does not work.
Please advise.
It is adobe acrobat 8.0 professional using win XP SP3

Thanks for answering my queries.
Could you please let get me the following details as well:
1. The version of Adobe Reader installed on your system.
2. The default PDF viewing application on your system. You can find the same by double clicking on a PDF on your system and see which application is used to render the PDF.
3. The value of the following registries:
HKEY_CLASSES_ROOT\Software\Adobe\Acrobat\Exe
HKEY_CLASSES_ROOT\AcroExch.Document.7\shell\Open\command
HKEY_CLASSES_ROOT\AcroExch.Document.7\shell\Read\command
Ankit

Vista PDF Preview handler installed on Win 7 32 bit does not work.

There is no discoverable information regarding failure to preview Adobe PDF files on Win 7 32 bit. The advice for 64 bit does not work. Adobe continues to install the Vista preview handler on my Windows 7 computer, which I suspect is the issue. Is there any way to find and install the Windows 7 32 bit handler or is there a registry hack that permits 11 to access the vista version or what? This is a repeat post, as I cannot locate the first and assume that there have been no responses, as I have received no alerts.
If you have an answer I will name my first born for you. He is 41 and object loudly, but no price to great.....

I have fifteen minutes to mark this as a question, despite the fact that no question link or icon exists. Adobe?

Preview Outlook2013 does not work on RDS2012R2 terminal server

Similar Messages

Maybe you are looking for