Preview playback on external monitor problem!

Hi im using my 2009
Model Name: MacBook Pro
Model Identifier: MacBookPro5,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 3 MB
Memory: 4 GB
Bus Speed: 1.07 GHz
Boot ROM Version: MBP51.0074.B01
SMC Version (system): 1.33f8
to edit my videos in final cut express and wish to preview on my 4:3 standard TV to save DVD's.
i have purchased my Mini display port to VGA adaptor and connected it to a convertor box outputting to video wire (Yellow one forgot its name) the mac recognises it and i can view my mac desktop on it but all i want is to be able to press play on the canvas and have it play in broadcast quality in full screen on my TV but it wont happen despite various other tutorials telling me how to do so. i used to be able to do this with ease on my old PC even with movie maker, any suggestions on how this can be done? ill be very grateful, Joel

"... play in broadcast quality in full screen on my TV ..."
You cannot accomplish this via the miniDisplay port and VGA. In this mode, you will see your full computer desktop on the TV (not just the FCE Canvas) and it will not be very good resolution.
You need an analog-digital converter connected via FireWire to your Mac. Most miniDV camcorders can serve as the converter. (Mac->FW->camcorder->analog a/v out->TV). Otherwise, you will need a converter like the Canopus ADVC-110.

Similar Messages

Possibly mundane Mini-DVI to VGA into an external monitor problem

Hi,
I've had a look over the interwebs regarding my problem and it seems as if it's not unusual to have external monitor problems but I'm not sure if mine is slightly different:
I had a perfectly working set up with my new Macbook (the white one, '06 model I believe), that was connected to my Hanns-G HU196D monitor via a mini-DVI to VGA adapter, no problems whatsoever. But for a couple of weeks now my Macbook just flickers a light blue colour, with nothing at all on the monitor, and my macbook is unusable until I remove the adapter. I've read about updating firmware but I can't see my desktop once the macbook is connected to the monitor so it's not possible to configure anything. I've read somewhere that my external monitor isn't compatible with this set up, but it was until a couple of weeks ago!
My Macbook's 4 months old now and since then I've bought a new mini-dvi to vga adapter and a new VGA cable, no connections seem loose on either mini-dvi port or my monitor's vga port.
Thanks if you can help!
Jack

You will need to use a mini Dvi-dvi and a dvi-svideo/rca adapter.
Joy joy hallelujah.
Pardon the sarcasm...I just wasted 3 hours of my life trying to sort the issue out.
Heard a KWORLD PlusTV PCTOTV Converter SA235 USB 2.0 Interface would sort the issue out for under 40$ but it's not Mac.
Hope that helps.
~r

Fullscreen video playback on external monitor (overlay problem?)

I want to watch videopodcasts via iTunes fullscreen on my external Monitor/TV. It works fine with Quicktime and WindowsMediaPlayer but iTunes doesn't play my Videos in Fullscreen on my external Monitor.
I had the idea it is because the overlay mode isn't siwtched on but I can't find where to setup the display mode of video playback in iTunes.
Can anybody help me?
Bernd.
PC Windows XP

oh, no...
i thouhght the iTunes Videoplayback would rely on Quicktime and thus it would be possible.
isn't there any other possibilty?
PC Windows XP

Jerky playback on external monitor

I'm getting playback that freezes and hangs up briefly on an external monitor. The video (from Final Cut timeline) is also playing on the preview monitor of my MBP (bought just before current version). Is there a way to stop the playback on the MBP? Is that what's causing the playback problem?
Thanks for any help.

The sequence was rendered and everything is on an external drive (spinning at 7200). By sequence settings do you mean my system settings? For playback back it's RT: unlimited, Video Quality: dynamic, Frame Rate: full, Pulldown Pattern: 2:3:2:3, and Gamma Correction: Accurate. The footage was shot at 24p on a DVX100a. Could my pulldown be wrong?

CS5 Playback Settings grayed out and no longer can set playback on external monitor.

I like to view my projects while editing on an external monitor but the Playback Settings are grayed out. I've done all my prior projects with external monitor display enabled with no problems and can go back to a prior projects completed and view them using an external playback monitor. For some reason, the Playback Settings on my latest project are grayed out and I'm not able to set Desktop Video Display During Playback.
The last project worked on was about 3 months ago. Last week, I started working on two new projects and noticed that I wasn't able to set playback to my external monitor. All my devices are hooked up and I can review older projects on the external monitor but can't set two new projects to use display on the external monitor.
Anyone have any ideas?
Problem solved. My fault.
The Sequence Preset Settings selected must support the device the external monitor is connected to. In my case, IEEE 1394 firewire. I corrected the new project to the correct Sequence Settings and can now view playback on the external monitor.

http://www.blackmagicdesign.com/press/pressdetails?releaseID=42319
"The Desktop Video 9.7.5 software update allows users to take advantage of many new features in the Adobe Creative Cloud desktop applications such as powerful new editing timelines and shortcuts and audio mixing with Adobe Premiere Pro® CC and new creative and visual effects tools with Adobe After Effects® CC."
So everything should be covered on that front. And as I listed, I was getting playback out of AE CC, so I feel it is solely an issue in Premiere. That was worth checking out though since CC is so new. Thanks for replying.

Video playback on external monitor

I have a problem with video playing on my external monitor.
I have been editing a 30 second commercial with several split screens and quad screens. After my last render, the video no longer plays on the external monitor. A frame plays, and then it freezes. I went thru the "Stock Answers" section and played with the RT settings and the memory/cache settings. Nothing seemed to make a difference. I also opened some older projects and they will not play thru the external monitor either. Finally, another note that may offer some clues is that when you print to tape it sometimes plays perfectly and other times it does not.
Any help provided will be greatly appreciated!
Jeremy

Here is my standard reply:
#8 External Monitor Viewing.
Shane's Stock Answer #8:
A simple path is mac > firewire > camera or deck > rca cables > tv
Then start up your camera and tv, then open fcp.
Then go View > External video > all frames
Video playback should be Apple firewire NTSC (If you are using an NTSC set)
Audio playback should be Audio follows Video
Techinially, this should send synched video to your TV
If for some reason you can't view your timeline on your external monitor, there are a few things to try:
1) Make sure that the camera/deck is connected and powered on BEFORE you open FCP.
2) In the Final Cut Pro menu select AUDIO/VIDEO Preferences and make sure your signal is being sent out thru Firewire DV.
3) Go to the menu and select VIEW>EXTERNAL>ALL FRAMES.
4) Click in the % box above the image and select FIT TO WINDOW.
5) Go to VIEW->refresh A/V devices
6) Make sure the Log & Capture window is closed
If you want it to play in both the canvas and the external monitor you need to go to the FINAL CUT PRO menu and select AUDIO/VIDIO settings and make sure MIRROR ON DESKTOP is selected under the PLAYBACK OUTPUT section
For all the stock answers, click on this link:
Shane Ross, "Stock Answers", 03:58pm Jan 13, 2005 CDT

Preview Playback on 2nd Monitor

I am brand new to the Final Cut AND Mac World - just got my first Mac with Final Cut Studio two days ago.
I am having some problems getting preview playback on my 2nd monitor in RAW or full screen, neither work. What I get is the current frame of the timeline, no moving video and I get audio playback.
I have View -> All Frames checked (as opposed to single frame) but I get the same results as if single frame were checked.
My primary monitor with the standard final cut layout is an Apple 20" cinema, and the 2nd monitor is an older 17" Samsung.
I get the exact same result if I switch the full screen preview playback over to my Apple display. Just the current frame with audio playback.
Any help on this would be greatly appreciated!

New Discussions ReponsesThe new system for discussions asks that after you mark your question as Answered, you take the time to mark any posts that have aided you with the tag and the post that provided your answer with the tag. This not only gives points to the posters, but points anyone searching for answers to similar problems to the proper posts.
If we use the forums properly they will work well...
Patrick

No playback to external monitor Premiere CC

Hello all ~
Mid-job (and of course now that I need to color correct), PP CC has stopped exporting video to my external monitor. I have tried trashing prefs (holding Shift+Opt at start-up) and it doesn't do the trick. In looking around, I've noticed people having this problem when using some BlackMagic cards, but my monitor is plugged directly into the Thunderbolt connector of my MacBook Pro. I've enclosed my Playback settings.
Oddly enough, when I fire up my old copy of PP CS6 it plays back to my external monitor just fine.
I've had had enough late-night edits that I may have inadvertently initiated some keystroke that changed a setting, but I can't think of what that would be or why a Preference Trash wouldn't reset it. Any help greatly appreciated. Thanks much.

Well, after much poking and prodding I found out what happened and how to fix it. If you look at the picture below, you can see that there is a row of razor-thin pixels pushing into my external monitor. So basically what happened was that I resized the window and thought that I had dragged it completely onto my main monitor, but my Program Monitor and Timeline were still ever-so-slightly overlapping onto my external monitor. When I moved them fully onto my main monitor, the video on my external monitor reappeared.
HOWEVER ( ! ), this does beg the question of why this problem remained as I did reset my editing workspace, I did trash preferences and I did do a complete uninstall/reinstall of PP CC... and still had the same problem. Shouldn't any one of those processes have put things back to where they were supposed to be? Where are these residual settings being stored, and how can you get rid of them if even a complete reinstall won't do the trick?
Would have saved a lot of time if they had worked as advertised. Happy to be up and running (and color correcting) though and hope this can help others who might be having the same problem.

Poor streaming playback on external monitor

Hi guys,
I never thought I would post here but the problem has gotten too annoying to ignore anymore. I have a 2008 Macbook with 4gb ram, 2.4ghz core 2 duo processor and os x 10.6.8.
I am experiencing poor playback where the video stutters/lags/skips. Usually the audio is out of sync with the video and the video looks as though it accelerates and decelerates. This happens on the macbook screen but also is especially pronounced when using an external monitor. I have the problem on youtube and netflix and am running the latest flash/silverlight plugins on firefox.
I didn't seem to have this problem before so am wondering if something may have changed. It's so annoying I am tempted to buy a new macbook but I am sure there is some kind of fix somewhere? I have a 60mbps internet connnection so it's not that, and if I play a DVD or .mpeg file, the playback is flawless.
Any ideas?

In FCP, go to view>refresh A/V devices
Then go View>External Video>all frames.

Video playback on external monitor working. Only works when Print to Video

I'm having a problem. I'm using FCP 5. When editing, my video playback is not showing up on my external monitor (Sharp MiniDV camcorder). It does however show up on the external monitor when I "Print to Video." This is the first time using FCP 5. I never had this problem with previous versions of FCP. Can anyone tell me whats going on? Thanks

#8 External Monitor Viewing.
Shane's Stock Answer #8:
A simple path is mac > firewire > camera or deck > rca cables > tv
Then start up your camera and tv, then open fcp.
Then go View > External video > all frames
Video playback should be Apple firewire NTSC (If you are using an NTSC set)
Audio playback should be Audio follows Video
Techinially, this should send synched video to your TV
If for some reason you can't view your timeline on your external monitor, there are a few things to try:
1) Make sure that the camera/deck is connected and powered on BEFORE you open FCP.
2) In the Final Cut Pro menu select AUDIO/VIDEO Preferences and make sure your signal is being sent out thru Firewire DV.
3) Go to the menu and select VIEW>EXTERNAL>ALL FRAMES.
4) Click in the % box above the image and select FIT TO WINDOW.
5) Go to VIEW->refresh A/V devices
6) Make sure the Log & Capture window is closed
If you want it to play in both the canvas and the external monitor you need to go to the FINAL CUT PRO menu and select AUDIO/VIDIO settings and make sure MIRROR ON DESKTOP is selected under the PLAYBACK OUTPUT section
Shane

Sequence playback on TV monitor problem

I've been having trouble getting HD sequences to playback on a connected TV (Standard DV plays back fine).
The tape deck and monitor are connected via component cables, and playback is fine while playing HD footage in the deck. In FCP, I change the easy set-up settings to HDV - 1080i60 and capture footage fine. When I start editing and want the footage to playback on the monitor, all my video playback options are grayed out under the Audio/Video Settings (except for Desktop Preview). The only way I've been successful in getting my HD sequences to playback on the TV is by changing the easy setup back to DV-NTSC while editing. However, doing it this way letterboxes the video on the monitor and degrades the footage. Any help would be appreciated.

That is the only way you are going to get HDV footage to play out via firewire...and show up on an SD monitor. By letting FCP downconvert the signal to a DV one...and not a good one at that. This is only meant to allow you to get an image onto an external monitor so that you can see your footage...basically a client monitor.
To get HDV out nicely to a monitor you need an HD capture card...
#25 HDV external Monitor Viewing
Shane's Stock Answer #25 - HDV external Monitor Viewing
To view HDV on an external monitor you are going to need to purchase a capture card, like the ones Decklink (www.decklink.com) or AJA (www.aja.com) offer. They will both play out HDV in real time. The catch is that you cannot view this on a regular TV or NTSC monitor. Since this is HD, an HD monitor will be needed. HOWEVER, both cards are capable of down converting the signal so that it can be displayed on an SD monitor. This won't be color accurate
HDV cannot be played out of FCP via Firewire because it's Long GOP structure is too taxing on your processors to spare the system resources needed to drive an external monitor.
The best option you have is the Matrox MXO...$1000. This coupled with an Apple 23" display gets you color correction quality...but, it isn't compatible with COLOR yet. www.matrox.com
And there are the Decklink Intensity and Intensity PRO cards as well.
Shane

External monitor: problem to enable video output

Hello,
I try to use an external monitor.
I usually use it by a camcorder and a Firewire PAL in FCP without any problem.
In Color, if I go in User preferences, Video output is set on disabled and the others (for example Digital Cinema preview or Firewire Pal) are all gray and I cannot set them.
Thank you for your help.

Luca,
Please refer to the included documentation. Color does not and will not send external video through firewire to any device, save one, and that is the Aja IO HD and then that device is limited to standard definition video only.
This "issue" has also been well covered in this and other forums: you need an input/output card manufactured by [Aja|http://www.aja.com/html/products_macintosh.html] or by [Blackmagic Designs|http://www.blackmagic-design.com/products>.

Black border on DVD playback with external monitor...why?

Hi all,
I've got a late 2011 MBP 13". Very happy with it (although use is limited as a DJ laptop - and, since I moved abroad, as the basis for a home cinema) and was quite happy to watch films / TV on it as it came. However, I wanted to be able to watch with other people and so have invested in an external monitor.
I have bought a Philips 23" V-line (model number 236V3L). I am completely happy with the picture quality etc but just have an issue during DVD playback:
The image (on fullscreen mode) has a 2" black border all the way round. I've tried fiddling with settings etc but can't seem to lose it...and don't know why. I wouldn't mind but obviously my 23" image is significantly smaller as a result.
Can anyone tell me why? When using the laptop in any other way (i.e. whilst typing this post) there is a 3/4" border on the left and on the right (but not at the top). Is it something to do with the aspect ratio? Is there anything I can do to fix it?
Looking forward to hearing your thoughts...
Regards,
Fin

I use my laptop and a Samsung SyncMaster as my main screen and my MBP as the secondary. I can drag the DVD window to the laptop screen, and then put it in full screen mode. Here is where the problem lies: When I click any application on the primary monitor, the DVD screen shrinks back to normal size.
In DVD Player's "Full Screen" preference. enable "Remain in full screen when DVD PLayer is inactive".

2011 Macbook Pro External Monitor Problems

Hi all,
Looking through some of the threads, it appears that getting macbook pros to work with an external monitors is a big issue.
I've just bought a phillips 27" monitor and I'm having no luck whatsoever getting my MBP to see it. I've tried both HDMI and DVI using Apple's own mini adapters, but no matter I do, the monitor fails to detect any kind of signal and goes into sleep mode.
I occassionally get the blue screen flicker on my MBP as though it's trying to connect, but the monitor does nothing!!
I've tried most of the suggestions in other threads, which relate to earlier OSX versions, but nothing has helped.
I'm running 10.8.4 on a 2.2 GHz Intel Core i7.
If I fire up my Apple TV, I can use mirroring and the monitor displays my desktop no problem, but the picture quality is poor. So I guess the monitor works. I want to use a bigger screen as I use Logic Pro, so clarity is pretty essential when it comes to picture quality.
Any help would be most appreciated.
Best Regards
Phil

Hello Phil,
The following article provides a number of troubleshooting steps that I'd recommend looking into, especially testing with another display if possible, and resetting the MacBook Pro's parameter RAM and SMC.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573
Cheers,
Allen

[solved] ThinkPad connect with extern Monitor Problem

Hello community
I have installed arch on my T420 integrated HD 3000 and i have the Problem that when i start arch and the boot messages comes i can see the deamon starts ok,ok,ok who should be on the right side but on the NEC they was displayed 5 cm inside. Also when iam on the console and i type dmesg all the output scroll down and broke 5 cm from the roof. And when iam on openbox and i will maximize one window it would be maximized on the size from the Laptop LCD.
I have made an .xinitrc
#!/bin/sh
# ~/.xinitrc
# Executed by startx (run your window manager from here)
#xrandr --output DP2 --auto --output LVDS --right-of LVDS
#xrandr --output DP1 --auto --output LVDS --auto --same-as DP1
xrandr -d DP2 -s 1900x1200
if [ -d /etc/X11/xinit/xinitrc.d ]; then
for f in /etc/X11/xinit/xinitrc.d/*; do
[ -x "$f" ] && . "$f"
done
unset f
fi
# exec gnome-session
# exec startkde
# exec startxfce4
and here is my Xorg.0.log
[ 81.298]
X.Org X Server 1.12.4
Release Date: 2012-08-27
[ 81.298] X Protocol Version 11, Revision 0
[ 81.298] Build Operating System: Linux 3.4.8-1-ARCH x86_64
[ 81.298] Current Operating System: Linux bullitt 3.5.4-1-ARCH #1 SMP PREEMPT Sat Sep 15 08:12:04 CEST 2012 x86_64
[ 81.298] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=7b8780ba-278c-4d61-a1ec-ba2a6f96c6ba ro quiet
[ 81.299] Build Date: 27 August 2012 08:04:39AM
[ 81.299]
[ 81.299] Current version of pixman: 0.26.2
[ 81.299] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 81.299] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 81.306] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Oct 7 16:33:34 2012
[ 81.307] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 81.308] (==) No Layout section. Using the first Screen section.
[ 81.308] (==) No screen section available. Using defaults.
[ 81.308] (**) |-->Screen "Default Screen Section" (0)
[ 81.308] (**) | |-->Monitor "<default monitor>"
[ 81.308] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 81.308] (==) Automatically adding devices
[ 81.308] (==) Automatically enabling devices
[ 81.308] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 81.308] Entry deleted from font path.
[ 81.308] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 81.308] Entry deleted from font path.
[ 81.308] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 81.308] Entry deleted from font path.
[ 81.308] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 81.308] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 81.308] Entry deleted from font path.
[ 81.308] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 81.308] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/
[ 81.308] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 81.308] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 81.308] (II) Loader magic: 0x7c8b00
[ 81.308] (II) Module ABI versions:
[ 81.308] X.Org ANSI C Emulation: 0.4
[ 81.308] X.Org Video Driver: 12.1
[ 81.308] X.Org XInput driver : 16.0
[ 81.308] X.Org Server Extension : 6.0
[ 81.308] (--) PCI:*(0:0:2:0) 8086:0126:17aa:21ce rev 9, Mem @ 0xf0000000/4194304, 0xe0000000/268435456, I/O @ 0x00005000/64
[ 81.308] (II) Open ACPI successful (/var/run/acpid.socket)
[ 81.308] (II) LoadModule: "extmod"
[ 81.309] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 81.309] (II) Module extmod: vendor="X.Org Foundation"
[ 81.309] compiled for 1.12.4, module version = 1.0.0
[ 81.309] Module class: X.Org Server Extension
[ 81.309] ABI class: X.Org Server Extension, version 6.0
[ 81.309] (II) Loading extension MIT-SCREEN-SAVER
[ 81.309] (II) Loading extension XFree86-VidModeExtension
[ 81.309] (II) Loading extension XFree86-DGA
[ 81.309] (II) Loading extension DPMS
[ 81.309] (II) Loading extension XVideo
[ 81.309] (II) Loading extension XVideo-MotionCompensation
[ 81.309] (II) Loading extension X-Resource
[ 81.309] (II) LoadModule: "dbe"
[ 81.309] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 81.309] (II) Module dbe: vendor="X.Org Foundation"
[ 81.309] compiled for 1.12.4, module version = 1.0.0
[ 81.309] Module class: X.Org Server Extension
[ 81.309] ABI class: X.Org Server Extension, version 6.0
[ 81.309] (II) Loading extension DOUBLE-BUFFER
[ 81.309] (II) LoadModule: "glx"
[ 81.309] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 81.309] (II) Module glx: vendor="X.Org Foundation"
[ 81.309] compiled for 1.12.4, module version = 1.0.0
[ 81.309] ABI class: X.Org Server Extension, version 6.0
[ 81.309] (==) AIGLX enabled
[ 81.309] (II) Loading extension GLX
[ 81.309] (II) LoadModule: "record"
[ 81.309] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 81.309] (II) Module record: vendor="X.Org Foundation"
[ 81.309] compiled for 1.12.4, module version = 1.13.0
[ 81.309] Module class: X.Org Server Extension
[ 81.309] ABI class: X.Org Server Extension, version 6.0
[ 81.309] (II) Loading extension RECORD
[ 81.309] (II) LoadModule: "dri"
[ 81.309] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 81.309] (II) Module dri: vendor="X.Org Foundation"
[ 81.309] compiled for 1.12.4, module version = 1.0.0
[ 81.309] ABI class: X.Org Server Extension, version 6.0
[ 81.309] (II) Loading extension XFree86-DRI
[ 81.309] (II) LoadModule: "dri2"
[ 81.309] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 81.309] (II) Module dri2: vendor="X.Org Foundation"
[ 81.309] compiled for 1.12.4, module version = 1.2.0
[ 81.309] ABI class: X.Org Server Extension, version 6.0
[ 81.309] (II) Loading extension DRI2
[ 81.309] (==) Matched intel as autoconfigured driver 0
[ 81.309] (==) Matched vesa as autoconfigured driver 1
[ 81.309] (==) Matched fbdev as autoconfigured driver 2
[ 81.309] (==) Assigned the driver to the xf86ConfigLayout
[ 81.309] (II) LoadModule: "intel"
[ 81.310] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 81.310] (II) Module intel: vendor="X.Org Foundation"
[ 81.310] compiled for 1.12.4, module version = 2.20.9
[ 81.310] Module class: X.Org Video Driver
[ 81.310] ABI class: X.Org Video Driver, version 12.1
[ 81.310] (II) LoadModule: "vesa"
[ 81.310] (WW) Warning, couldn't open module vesa
[ 81.310] (II) UnloadModule: "vesa"
[ 81.310] (II) Unloading vesa
[ 81.310] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 81.310] (II) LoadModule: "fbdev"
[ 81.310] (WW) Warning, couldn't open module fbdev
[ 81.310] (II) UnloadModule: "fbdev"
[ 81.310] (II) Unloading fbdev
[ 81.310] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 81.310] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
Haswell Server (GT2+), Haswell SDV Desktop (GT1),
Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
Haswell ULT Server (GT1), Haswell ULT Server (GT2),
Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
ValleyView PO board
[ 81.310] (--) using VT number 7
[ 81.313] drmOpenDevice: node name is /dev/dri/card0
[ 81.314] drmOpenDevice: open result is 8, (OK)
[ 81.314] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 81.314] drmOpenDevice: node name is /dev/dri/card0
[ 81.314] drmOpenDevice: open result is 8, (OK)
[ 81.314] drmOpenByBusid: drmOpenMinor returns 8
[ 81.314] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 81.314] drmOpenDevice: node name is /dev/dri/card0
[ 81.314] drmOpenDevice: open result is 9, (OK)
[ 81.314] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 81.314] drmOpenDevice: node name is /dev/dri/card0
[ 81.314] drmOpenDevice: open result is 9, (OK)
[ 81.314] drmOpenByBusid: drmOpenMinor returns 9
[ 81.314] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 81.314] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 81.314] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 81.314] (==) intel(0): RGB weight 888
[ 81.314] (==) intel(0): Default visual is TrueColor
[ 81.314] (--) intel(0): Integrated Graphics Chipset: Intel(R) Sandybridge Mobile (GT2+)
[ 81.314] (**) intel(0): Relaxed fencing enabled
[ 81.314] (**) intel(0): Wait on SwapBuffers? enabled
[ 81.314] (**) intel(0): Triple buffering? enabled
[ 81.314] (**) intel(0): Framebuffer tiled
[ 81.315] (**) intel(0): Pixmaps tiled
[ 81.315] (**) intel(0): 3D buffers tiled
[ 81.315] (**) intel(0): SwapBuffers wait enabled
[ 81.315] (==) intel(0): video overlay key set to 0x101fe
[ 81.315] (II) intel(0): Output LVDS1 has no monitor section
[ 81.315] (--) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[ 81.315] (II) intel(0): Output VGA1 has no monitor section
[ 81.340] (II) intel(0): Output HDMI1 has no monitor section
[ 81.380] (II) intel(0): Output DP1 has no monitor section
[ 81.393] (II) intel(0): Output HDMI2 has no monitor section
[ 81.406] (II) intel(0): Output HDMI3 has no monitor section
[ 81.464] (II) intel(0): Output DP2 has no monitor section
[ 81.506] (II) intel(0): Output DP3 has no monitor section
[ 81.507] (II) intel(0): EDID for output LVDS1
[ 81.507] (II) intel(0): Manufacturer: AUO Model: 213e Serial#: 0
[ 81.507] (II) intel(0): Year: 2010 Week: 33
[ 81.507] (II) intel(0): EDID Version: 1.4
[ 81.507] (II) intel(0): Digital Display Input
[ 81.507] (II) intel(0): 6 bits per channel
[ 81.507] (II) intel(0): Digital interface is undefined
[ 81.507] (II) intel(0): Max Image Size [cm]: horiz.: 31 vert.: 17
[ 81.507] (II) intel(0): Gamma: 2.20
[ 81.507] (II) intel(0): No DPMS capabilities specified
[ 81.507] (II) intel(0): Supported color encodings: RGB 4:4:4
[ 81.507] (II) intel(0): First detailed timing is preferred mode
[ 81.507] (II) intel(0): Preferred mode is native pixel format and refresh rate
[ 81.507] (II) intel(0): redX: 0.610 redY: 0.350 greenX: 0.320 greenY: 0.560
[ 81.507] (II) intel(0): blueX: 0.150 blueY: 0.130 whiteX: 0.313 whiteY: 0.329
[ 81.507] (II) intel(0): Manufacturer's mask: 0
[ 81.507] (II) intel(0): Supported detailed timing:
[ 81.507] (II) intel(0): clock: 110.0 MHz Image Size: 309 x 174 mm
[ 81.507] (II) intel(0): h_active: 1600 h_sync: 1664 h_sync_end 1706 h_blank_end 2010 h_border: 0
[ 81.507] (II) intel(0): v_active: 900 v_sync: 903 v_sync_end 906 v_blanking: 912 v_border: 0
[ 81.507] (II) intel(0): Supported detailed timing:
[ 81.507] (II) intel(0): clock: 73.3 MHz Image Size: 309 x 174 mm
[ 81.507] (II) intel(0): h_active: 1600 h_sync: 1664 h_sync_end 1706 h_blank_end 2010 h_border: 0
[ 81.507] (II) intel(0): v_active: 900 v_sync: 903 v_sync_end 906 v_blanking: 912 v_border: 0
[ 81.507] (II) intel(0): AUO
[ 81.507] (II) intel(0): B140RW02 V1
[ 81.507] (II) intel(0): EDID (in hex):
[ 81.507] (II) intel(0): 00ffffffffffff0006af3e2100000000
[ 81.507] (II) intel(0): 21140104901f11780261959c59528f26
[ 81.507] (II) intel(0): 21505400000001010101010101010101
[ 81.507] (II) intel(0): 010101010101f82a409a61840c30402a
[ 81.507] (II) intel(0): 330035ae10000018a51c409a61840c30
[ 81.507] (II) intel(0): 402a330035ae10000018000000fe0041
[ 81.507] (II) intel(0): 554f0a202020202020202020000000fe
[ 81.507] (II) intel(0): 004231343052573032205631200a00d0
[ 81.507] (II) intel(0): EDID vendor "AUO", prod id 8510
[ 81.507] (II) intel(0): Printing DDC gathered Modelines:
[ 81.508] (II) intel(0): Modeline "1600x900"x0.0 110.00 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (54.7 kHz eP)
[ 81.508] (II) intel(0): Modeline "1600x900"x0.0 73.33 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (36.5 kHz e)
[ 81.508] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 81.508] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 81.508] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 81.508] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 81.508] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 81.508] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 81.508] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 81.508] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 81.508] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 81.508] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 81.508] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 81.508] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 81.508] (II) intel(0): Printing probed modes for output LVDS1
[ 81.508] (II) intel(0): Modeline "1600x900"x60.0 110.00 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (54.7 kHz eP)
[ 81.508] (II) intel(0): Modeline "1600x900"x40.0 73.33 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (36.5 kHz e)
[ 81.508] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 81.508] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 81.508] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 81.508] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 81.508] (II) intel(0): EDID for output VGA1
[ 81.533] (II) intel(0): EDID for output HDMI1
[ 81.573] (II) intel(0): EDID for output DP1
[ 81.586] (II) intel(0): EDID for output HDMI2
[ 81.600] (II) intel(0): EDID for output HDMI3
[ 81.657] (II) intel(0): EDID for output DP2
[ 81.657] (II) intel(0): Manufacturer: NEC Model: 67d1 Serial#: 0
[ 81.657] (II) intel(0): Year: 2011 Week: 33
[ 81.657] (II) intel(0): EDID Version: 1.4
[ 81.657] (II) intel(0): Digital Display Input
[ 81.657] (II) intel(0): 10 bits per channel
[ 81.657] (II) intel(0): Digital interface is DisplayPort
[ 81.657] (II) intel(0): Max Image Size [cm]: horiz.: 52 vert.: 32
[ 81.657] (II) intel(0): Gamma: 2.20
[ 81.657] (II) intel(0): DPMS capabilities: StandBy Suspend Off
[ 81.657] (II) intel(0): Supported color encodings: RGB 4:4:4
[ 81.657] (II) intel(0): First detailed timing is preferred mode
[ 81.657] (II) intel(0): Preferred mode is native pixel format and refresh rate
[ 81.657] (II) intel(0): redX: 0.679 redY: 0.310 greenX: 0.210 greenY: 0.686
[ 81.657] (II) intel(0): blueX: 0.149 blueY: 0.047 whiteX: 0.313 whiteY: 0.329
[ 81.657] (II) intel(0): Supported established timings:
[ 81.657] (II) intel(0): 720x400@70Hz
[ 81.657] (II) intel(0): 640x480@60Hz
[ 81.657] (II) intel(0): 640x480@67Hz
[ 81.657] (II) intel(0): 640x480@72Hz
[ 81.657] (II) intel(0): 640x480@75Hz
[ 81.657] (II) intel(0): 800x600@56Hz
[ 81.657] (II) intel(0): 800x600@60Hz
[ 81.657] (II) intel(0): 800x600@72Hz
[ 81.657] (II) intel(0): 800x600@75Hz
[ 81.657] (II) intel(0): 832x624@75Hz
[ 81.657] (II) intel(0): 1024x768@60Hz
[ 81.657] (II) intel(0): 1024x768@70Hz
[ 81.657] (II) intel(0): 1024x768@75Hz
[ 81.657] (II) intel(0): 1280x1024@75Hz
[ 81.657] (II) intel(0): 1152x864@75Hz
[ 81.657] (II) intel(0): Manufacturer's mask: 0
[ 81.657] (II) intel(0): Supported standard timings:
[ 81.657] (II) intel(0): #0: hsize: 1280 vsize 720 refresh: 60 vid: 49281
[ 81.657] (II) intel(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 81.657] (II) intel(0): #2: hsize: 1400 vsize 1050 refresh: 60 vid: 16528
[ 81.657] (II) intel(0): #3: hsize: 1360 vsize 765 refresh: 60 vid: 49291
[ 81.657] (II) intel(0): #4: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 81.657] (II) intel(0): #5: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
[ 81.657] (II) intel(0): #6: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 81.657] (II) intel(0): #7: hsize: 1920 vsize 1200 refresh: 60 vid: 209
[ 81.657] (II) intel(0): Supported detailed timing:
[ 81.657] (II) intel(0): clock: 154.0 MHz Image Size: 518 x 324 mm
[ 81.657] (II) intel(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0
[ 81.657] (II) intel(0): v_active: 1200 v_sync: 1203 v_sync_end 1209 v_blanking: 1235 v_border: 0
[ 81.657] (II) intel(0): Ranges: V min: 50 V max: 85 Hz, H min: 31 H max: 92 kHz, PixClock max 165 MHz
[ 81.657] (II) intel(0): Monitor name: PA241W
[ 81.657] (II) intel(0): Serial No: 18107120UB
[ 81.657] (II) intel(0): EDID (in hex):
[ 81.657] (II) intel(0): 00ffffffffffff0038a3d16700000000
[ 81.657] (II) intel(0): 21150104b5342078e2de45ad4f35af26
[ 81.657] (II) intel(0): 0c5054bfef8081c0818090408bc09500
[ 81.657] (II) intel(0): a940b300d100283c80a070b023403020
[ 81.657] (II) intel(0): 360006442100001a000000fd0032551f
[ 81.657] (II) intel(0): 5c10000a202020202020000000fc0050
[ 81.657] (II) intel(0): 41323431570a202020202020000000ff
[ 81.657] (II) intel(0): 00313831303731323055420a2020004b
[ 81.657] (II) intel(0): Printing probed modes for output DP2
[ 81.657] (II) intel(0): Modeline "1920x1200"x60.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz eP)
[ 81.657] (II) intel(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 81.657] (II) intel(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 81.657] (II) intel(0): Modeline "1680x945"x60.0 131.48 1680 1784 1960 2240 945 946 949 978 -hsync +vsync (58.7 kHz)
[ 81.657] (II) intel(0): Modeline "1400x1050"x74.9 156.00 1400 1504 1648 1896 1050 1053 1057 1099 -hsync +vsync (82.3 kHz e)
[ 81.657] (II) intel(0): Modeline "1400x1050"x60.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
[ 81.657] (II) intel(0): Modeline "1600x900"x60.0 118.96 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz)
[ 81.657] (II) intel(0): Modeline "1280x1024"x85.0 157.50 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync (91.1 kHz e)
[ 81.657] (II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 81.657] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 81.657] (II) intel(0): Modeline "1440x900"x84.8 157.00 1440 1544 1696 1952 900 903 909 948 -hsync +vsync (80.4 kHz e)
[ 81.657] (II) intel(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
[ 81.657] (II) intel(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 81.657] (II) intel(0): Modeline "1280x960"x85.0 148.50 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync (85.9 kHz e)
[ 81.657] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 81.657] (II) intel(0): Modeline "1360x768"x59.8 84.75 1366 1431 1567 1776 768 771 781 798 -hsync +vsync (47.7 kHz)
[ 81.657] (II) intel(0): Modeline "1360x768"x60.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e)
[ 81.657] (II) intel(0): Modeline "1280x800"x84.9 122.50 1280 1360 1496 1712 800 803 809 843 -hsync +vsync (71.6 kHz e)
[ 81.657] (II) intel(0): Modeline "1280x800"x74.9 106.50 1280 1360 1488 1696 800 803 809 838 -hsync +vsync (62.8 kHz e)
[ 81.657] (II) intel(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 +hsync -vsync (49.7 kHz e)
[ 81.657] (II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 81.657] (II) intel(0): Modeline "1280x768"x84.8 117.50 1280 1360 1496 1712 768 771 778 809 -hsync +vsync (68.6 kHz e)
[ 81.657] (II) intel(0): Modeline "1280x768"x74.9 102.25 1280 1360 1488 1696 768 771 778 805 +hsync -vsync (60.3 kHz e)
[ 81.657] (II) intel(0): Modeline "1280x768"x59.9 79.50 1280 1344 1472 1664 768 771 778 798 -hsync +vsync (47.8 kHz e)
[ 81.657] (II) intel(0): Modeline "1280x720"x60.0 74.44 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.7 kHz)
[ 81.658] (II) intel(0): Modeline "1024x768"x85.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz e)
[ 81.658] (II) intel(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 81.658] (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 81.658] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 81.658] (II) intel(0): Modeline "1024x576"x60.0 46.97 1024 1064 1168 1312 576 577 580 597 -hsync +vsync (35.8 kHz)
[ 81.658] (II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 81.658] (II) intel(0): Modeline "800x600"x85.1 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz e)
[ 81.658] (II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 81.658] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 81.658] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 81.658] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 81.658] (II) intel(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
[ 81.658] (II) intel(0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz e)
[ 81.658] (II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
[ 81.658] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 81.658] (II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 81.658] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 81.658] (II) intel(0): Modeline "720x400"x85.0 35.50 720 756 828 936 400 401 404 446 -hsync +vsync (37.9 kHz e)
[ 81.658] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 81.658] (II) intel(0): Modeline "640x400"x85.1 31.50 640 672 736 832 400 401 404 445 -hsync +vsync (37.9 kHz e)
[ 81.658] (II) intel(0): Modeline "640x350"x85.1 31.50 640 672 736 832 350 382 385 445 +hsync -vsync (37.9 kHz e)
[ 81.700] (II) intel(0): EDID for output DP3
[ 81.700] (II) intel(0): Output LVDS1 connected
[ 81.700] (II) intel(0): Output VGA1 disconnected
[ 81.700] (II) intel(0): Output HDMI1 disconnected
[ 81.700] (II) intel(0): Output DP1 disconnected
[ 81.700] (II) intel(0): Output HDMI2 disconnected
[ 81.700] (II) intel(0): Output HDMI3 disconnected
[ 81.700] (II) intel(0): Output DP2 connected
[ 81.700] (II) intel(0): Output DP3 disconnected
[ 81.700] (II) intel(0): Using exact sizes for initial modes
[ 81.700] (II) intel(0): Output LVDS1 using initial mode 1600x900
[ 81.700] (II) intel(0): Output DP2 using initial mode 1600x900
[ 81.700] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 81.700] (II) intel(0): Kernel page flipping support detected, enabling
[ 81.700] (**) intel(0): Display dimensions: (310, 170) mm
[ 81.700] (**) intel(0): DPI set to (131, 134)
[ 81.700] (II) Loading sub module "fb"
[ 81.700] (II) LoadModule: "fb"
[ 81.701] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 81.701] (II) Module fb: vendor="X.Org Foundation"
[ 81.701] compiled for 1.12.4, module version = 1.0.0
[ 81.701] ABI class: X.Org ANSI C Emulation, version 0.4
[ 81.701] (II) Loading sub module "dri2"
[ 81.701] (II) LoadModule: "dri2"
[ 81.701] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 81.701] (II) Module dri2: vendor="X.Org Foundation"
[ 81.701] compiled for 1.12.4, module version = 1.2.0
[ 81.701] ABI class: X.Org Server Extension, version 6.0
[ 81.701] (==) Depth 24 pixmap format is 32 bpp
[ 81.702] (II) intel(0): [DRI2] Setup complete
[ 81.702] (II) intel(0): [DRI2] DRI driver: i965
[ 81.702] (II) intel(0): Allocated new frame buffer 1600x900 stride 6656, tiled
[ 81.704] (II) UXA(0): Driver registered support for the following operations:
[ 81.704] (II) solid
[ 81.704] (II) copy
[ 81.704] (II) composite (RENDER acceleration)
[ 81.704] (II) put_image
[ 81.704] (II) get_image
[ 81.704] (==) intel(0): Backing store disabled
[ 81.704] (==) intel(0): Silken mouse enabled
[ 81.704] (II) intel(0): Initializing HW Cursor
[ 81.704] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 81.707] (==) intel(0): DPMS enabled
[ 81.707] (==) intel(0): Intel XvMC decoder enabled
[ 81.707] (II) intel(0): Set up textured video
[ 81.707] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 81.707] (II) intel(0): direct rendering: DRI2 Enabled
[ 81.707] (==) intel(0): hotplug detection: "enabled"
[ 82.106] (--) RandR disabled
[ 82.107] (II) Initializing built-in extension Generic Event Extension
[ 82.107] (II) Initializing built-in extension SHAPE
[ 82.107] (II) Initializing built-in extension MIT-SHM
[ 82.107] (II) Initializing built-in extension XInputExtension
[ 82.107] (II) Initializing built-in extension XTEST
[ 82.107] (II) Initializing built-in extension BIG-REQUESTS
[ 82.107] (II) Initializing built-in extension SYNC
[ 82.107] (II) Initializing built-in extension XKEYBOARD
[ 82.107] (II) Initializing built-in extension XC-MISC
[ 82.107] (II) Initializing built-in extension SECURITY
[ 82.107] (II) Initializing built-in extension XINERAMA
[ 82.107] (II) Initializing built-in extension XFIXES
[ 82.107] (II) Initializing built-in extension RENDER
[ 82.107] (II) Initializing built-in extension RANDR
[ 82.107] (II) Initializing built-in extension COMPOSITE
[ 82.107] (II) Initializing built-in extension DAMAGE
[ 82.119] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 82.119] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 82.119] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 82.119] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 82.119] (II) AIGLX: Loaded and initialized i965
[ 82.119] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 82.119] (II) intel(0): Setting screen physical size to 423 x 238
[ 82.158] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 82.158] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 82.158] (II) LoadModule: "evdev"
[ 82.159] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 82.159] (II) Module evdev: vendor="X.Org Foundation"
[ 82.159] compiled for 1.12.3.901, module version = 2.7.3
[ 82.159] Module class: X.Org XInput Driver
[ 82.159] ABI class: X.Org XInput driver, version 16.0
[ 82.159] (II) Using input driver 'evdev' for 'Power Button'
[ 82.159] (**) Power Button: always reports core events
[ 82.159] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 82.159] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 82.159] (--) evdev: Power Button: Found keys
[ 82.159] (II) evdev: Power Button: Configuring as keyboard
[ 82.159] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[ 82.160] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 82.160] (**) Option "xkb_rules" "evdev"
[ 82.160] (**) Option "xkb_model" "evdev"
[ 82.160] (**) Option "xkb_layout" "de"
[ 82.160] (**) Option "xkb_variant" "nodeadkeys"
[ 82.193] (II) config/udev: Adding input device Video Bus (/dev/input/event12)
[ 82.193] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 82.193] (II) Using input driver 'evdev' for 'Video Bus'
[ 82.193] (**) Video Bus: always reports core events
[ 82.193] (**) evdev: Video Bus: Device: "/dev/input/event12"
[ 82.193] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 82.193] (--) evdev: Video Bus: Found keys
[ 82.193] (II) evdev: Video Bus: Configuring as keyboard
[ 82.193] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input12/event12"
[ 82.193] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 82.193] (**) Option "xkb_rules" "evdev"
[ 82.193] (**) Option "xkb_model" "evdev"
[ 82.193] (**) Option "xkb_layout" "de"
[ 82.193] (**) Option "xkb_variant" "nodeadkeys"
[ 82.195] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 82.195] (II) No input driver specified, ignoring this device.
[ 82.195] (II) This device may have been added with another device file.
[ 82.195] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 82.195] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 82.195] (II) Using input driver 'evdev' for 'Sleep Button'
[ 82.195] (**) Sleep Button: always reports core events
[ 82.195] (**) evdev: Sleep Button: Device: "/dev/input/event3"
[ 82.195] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 82.195] (--) evdev: Sleep Button: Found keys
[ 82.195] (II) evdev: Sleep Button: Configuring as keyboard
[ 82.195] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3/event3"
[ 82.195] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 82.195] (**) Option "xkb_rules" "evdev"
[ 82.196] (**) Option "xkb_model" "evdev"
[ 82.196] (**) Option "xkb_layout" "de"
[ 82.196] (**) Option "xkb_variant" "nodeadkeys"
[ 82.197] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/event1)
[ 82.197] (**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 82.197] (II) Using input driver 'evdev' for 'Logitech USB-PS/2 Optical Mouse'
[ 82.197] (**) Logitech USB-PS/2 Optical Mouse: always reports core events
[ 82.197] (**) evdev: Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event1"
[ 82.197] (--) evdev: Logitech USB-PS/2 Optical Mouse: Vendor 0x46d Product 0xc01e
[ 82.197] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found 12 mouse buttons
[ 82.197] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
[ 82.197] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found relative axes
[ 82.197] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
[ 82.197] (II) evdev: Logitech USB-PS/2 Optical Mouse: Configuring as mouse
[ 82.197] (II) evdev: Logitech USB-PS/2 Optical Mouse: Adding scrollwheel support
[ 82.197] (**) evdev: Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
[ 82.197] (**) evdev: Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 82.197] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input1/event1"
[ 82.197] (II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE, id 9)
[ 82.197] (II) evdev: Logitech USB-PS/2 Optical Mouse: initialized for relative axes.
[ 82.197] (**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1
[ 82.197] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration profile 0
[ 82.197] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration factor: 2.000
[ 82.197] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration threshold: 4
[ 82.197] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/mouse0)
[ 82.197] (II) No input driver specified, ignoring this device.
[ 82.197] (II) This device may have been added with another device file.
[ 82.197] (II) config/udev: Adding input device Integrated Camera (/dev/input/event10)
[ 82.197] (**) Integrated Camera: Applying InputClass "evdev keyboard catchall"
[ 82.197] (II) Using input driver 'evdev' for 'Integrated Camera'
[ 82.197] (**) Integrated Camera: always reports core events
[ 82.197] (**) evdev: Integrated Camera: Device: "/dev/input/event10"
[ 82.197] (--) evdev: Integrated Camera: Vendor 0x4f2 Product 0xb221
[ 82.197] (--) evdev: Integrated Camera: Found keys
[ 82.197] (II) evdev: Integrated Camera: Configuring as keyboard
[ 82.197] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input10/event10"
[ 82.197] (II) XINPUT: Adding extended input device "Integrated Camera" (type: KEYBOARD, id 10)
[ 82.197] (**) Option "xkb_rules" "evdev"
[ 82.197] (**) Option "xkb_model" "evdev"
[ 82.197] (**) Option "xkb_layout" "de"
[ 82.197] (**) Option "xkb_variant" "nodeadkeys"
[ 82.198] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event13)
[ 82.198] (II) No input driver specified, ignoring this device.
[ 82.198] (II) This device may have been added with another device file.
[ 82.198] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event14)
[ 82.198] (II) No input driver specified, ignoring this device.
[ 82.198] (II) This device may have been added with another device file.
[ 82.198] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event15)
[ 82.198] (II) No input driver specified, ignoring this device.
[ 82.198] (II) This device may have been added with another device file.
[ 82.198] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event16)
[ 82.198] (II) No input driver specified, ignoring this device.
[ 82.198] (II) This device may have been added with another device file.
[ 82.198] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event17)
[ 82.198] (II) No input driver specified, ignoring this device.
[ 82.198] (II) This device may have been added with another device file.
[ 82.198] (II) config/udev: Adding input device HDA Intel PCH Dock Mic (/dev/input/event18)
[ 82.198] (II) No input driver specified, ignoring this device.
[ 82.198] (II) This device may have been added with another device file.
[ 82.198] (II) config/udev: Adding input device HDA Intel PCH Dock Headphone (/dev/input/event19)
[ 82.198] (II) No input driver specified, ignoring this device.
[ 82.198] (II) This device may have been added with another device file.
[ 82.198] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event20)
[ 82.198] (II) No input driver specified, ignoring this device.
[ 82.198] (II) This device may have been added with another device file.
[ 82.199] (II) config/udev: Adding input device HID 046a:0101 (/dev/input/event5)
[ 82.199] (**) HID 046a:0101: Applying InputClass "evdev keyboard catchall"
[ 82.199] (II) Using input driver 'evdev' for 'HID 046a:0101'
[ 82.199] (**) HID 046a:0101: always reports core events
[ 82.199] (**) evdev: HID 046a:0101: Device: "/dev/input/event5"
[ 82.199] (--) evdev: HID 046a:0101: Vendor 0x46a Product 0x101
[ 82.199] (--) evdev: HID 046a:0101: Found keys
[ 82.199] (II) evdev: HID 046a:0101: Configuring as keyboard
[ 82.199] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input5/event5"
[ 82.199] (II) XINPUT: Adding extended input device "HID 046a:0101" (type: KEYBOARD, id 11)
[ 82.199] (**) Option "xkb_rules" "evdev"
[ 82.199] (**) Option "xkb_model" "evdev"
[ 82.199] (**) Option "xkb_layout" "de"
[ 82.199] (**) Option "xkb_variant" "nodeadkeys"
[ 82.199] (II) config/udev: Adding input device HID 046a:0101 (/dev/input/event7)
[ 82.199] (**) HID 046a:0101: Applying InputClass "evdev keyboard catchall"
[ 82.199] (II) Using input driver 'evdev' for 'HID 046a:0101'
[ 82.199] (**) HID 046a:0101: always reports core events
[ 82.199] (**) evdev: HID 046a:0101: Device: "/dev/input/event7"
[ 82.199] (--) evdev: HID 046a:0101: Vendor 0x46a Product 0x101
[ 82.199] (--) evdev: HID 046a:0101: Found 1 mouse buttons
[ 82.199] (--) evdev: HID 046a:0101: Found scroll wheel(s)
[ 82.199] (--) evdev: HID 046a:0101: Found relative axes
[ 82.199] (II) evdev: HID 046a:0101: Forcing relative x/y axes to exist.
[ 82.199] (--) evdev: HID 046a:0101: Found absolute axes
[ 82.199] (II) evdev: HID 046a:0101: Forcing absolute x/y axes to exist.
[ 82.199] (--) evdev: HID 046a:0101: Found keys
[ 82.199] (II) evdev: HID 046a:0101: Configuring as mouse
[ 82.199] (II) evdev: HID 046a:0101: Configuring as keyboard
[ 82.199] (II) evdev: HID 046a:0101: Adding scrollwheel support
[ 82.199] (**) evdev: HID 046a:0101: YAxisMapping: buttons 4 and 5
[ 82.199] (**) evdev: HID 046a:0101: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 82.199] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/input/input7/event7"
[ 82.199] (II) XINPUT: Adding extended input device "HID 046a:0101" (type: KEYBOARD, id 12)
[ 82.199] (**) Option "xkb_rules" "evdev"
[ 82.199] (**) Option "xkb_model" "evdev"
[ 82.199] (**) Option "xkb_layout" "de"
[ 82.199] (**) Option "xkb_variant" "nodeadkeys"
[ 82.199] (II) evdev: HID 046a:0101: initialized for relative axes.
[ 82.199] (WW) evdev: HID 046a:0101: ignoring absolute axes.
[ 82.199] (**) HID 046a:0101: (accel) keeping acceleration scheme 1
[ 82.199] (**) HID 046a:0101: (accel) acceleration profile 0
[ 82.199] (**) HID 046a:0101: (accel) acceleration factor: 2.000
[ 82.199] (**) HID 046a:0101: (accel) acceleration threshold: 4
[ 82.200] (II) config/udev: Adding input device HID 046a:0101 (/dev/input/event8)
[ 82.200] (**) HID 046a:0101: Applying InputClass "evdev pointer catchall"
[ 82.200] (II) Using input driver 'evdev' for 'HID 046a:0101'
[ 82.200] (**) HID 046a:0101: always reports core events
[ 82.200] (**) evdev: HID 046a:0101: Device: "/dev/input/event8"
[ 82.200] (--) evdev: HID 046a:0101: Vendor 0x46a Product 0x101
[ 82.200] (--) evdev: HID 046a:0101: Found 9 mouse buttons
[ 82.200] (--) evdev: HID 046a:0101: Found scroll wheel(s)
[ 82.200] (--) evdev: HID 046a:0101: Found relative axes
[ 82.200] (--) evdev: HID 046a:0101: Found x and y relative axes
[ 82.200] (II) evdev: HID 046a:0101: Configuring as mouse
[ 82.200] (II) evdev: HID 046a:0101: Adding scrollwheel support
[ 82.200] (**) evdev: HID 046a:0101: YAxisMapping: buttons 4 and 5
[ 82.200] (**) evdev: HID 046a:0101: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 82.200] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.2/input/input8/event8"
[ 82.200] (II) XINPUT: Adding extended input device "HID 046a:0101" (type: MOUSE, id 13)
[ 82.200] (II) evdev: HID 046a:0101: initialized for relative axes.
[ 82.200] (**) HID 046a:0101: (accel) keeping acceleration scheme 1
[ 82.200] (**) HID 046a:0101: (accel) acceleration profile 0
[ 82.200] (**) HID 046a:0101: (accel) acceleration factor: 2.000
[ 82.200] (**) HID 046a:0101: (accel) acceleration threshold: 4
[ 82.200] (II) config/udev: Adding input device HID 046a:0101 (/dev/input/mouse1)
[ 82.200] (II) No input driver specified, ignoring this device.
[ 82.200] (II) This device may have been added with another device file.
[ 82.200] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 82.200] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 82.200] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 82.200] (**) AT Translated Set 2 keyboard: always reports core events
[ 82.200] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 82.200] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 82.200] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 82.200] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 82.200] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 82.200] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
[ 82.200] (**) Option "xkb_rules" "evdev"
[ 82.200] (**) Option "xkb_model" "evdev"
[ 82.200] (**) Option "xkb_layout" "de"
[ 82.200] (**) Option "xkb_variant" "nodeadkeys"
[ 82.201] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event11)
[ 82.201] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 82.201] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 82.201] (II) LoadModule: "synaptics"
[ 82.201] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 82.201] (II) Module synaptics: vendor="X.Org Foundation"
[ 82.201] compiled for 1.12.2, module version = 1.6.2
[ 82.201] Module class: X.Org XInput Driver
[ 82.201] ABI class: X.Org XInput driver, version 16.0
[ 82.201] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 82.201] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 82.201] (**) Option "Device" "/dev/input/event11"
[ 82.203] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[ 82.203] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5888
[ 82.203] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4820
[ 82.203] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 82.203] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 82.203] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 82.203] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 82.203] (**) Option "TapButton1" "1"
[ 82.203] (**) Option "TapButton2" "2"
[ 82.203] (**) Option "TapButton3" "3"
[ 82.203] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 82.203] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 82.204] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input11/event11"
[ 82.204] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 15)
[ 82.204] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 82.204] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 82.204] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.036
[ 82.204] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 82.204] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 82.204] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 82.204] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 82.204] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 82.204] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse2)
[ 82.204] (II) No input driver specified, ignoring this device.
[ 82.204] (II) This device may have been added with another device file.
[ 82.204] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event21)
[ 82.204] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
[ 82.204] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint'
[ 82.204] (**) TPPS/2 IBM TrackPoint: always reports core events
[ 82.204] (**) evdev: TPPS/2 IBM TrackPoint: Device: "/dev/input/event21"
[ 82.204] (--) evdev: TPPS/2 IBM TrackPoint: Vendor 0x2 Product 0xa
[ 82.204] (--) evdev: TPPS/2 IBM TrackPoint: Found 3 mouse buttons
[ 82.204] (--) evdev: TPPS/2 IBM TrackPoint: Found relative axes
[ 82.204] (--) evdev: TPPS/2 IBM TrackPoint: Found x and y relative axes
[ 82.204] (II) evdev: TPPS/2 IBM TrackPoint: Configuring as mouse
[ 82.204] (**) evdev: TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
[ 82.204] (**) evdev: TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 82.204] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/serio2/input/input21/event21"
[ 82.204] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 16)
[ 82.205] (II) evdev: TPPS/2 IBM TrackPoint: initialized for relative axes.
[ 82.205] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
[ 82.205] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
[ 82.205] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[ 82.205] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[ 82.205] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse3)
[ 82.205] (II) No input driver specified, ignoring this device.
[ 82.205] (II) This device may have been added with another device file.
[ 82.205] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 82.205] (II) No input driver specified, ignoring this device.
[ 82.205] (II) This device may have been added with another device file.
[ 82.205] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event9)
[ 82.205] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
[ 82.205] (II) Using input driver 'evdev' for 'ThinkPad Extra Buttons'
[ 82.205] (**) ThinkPad Extra Buttons: always reports core events
[ 82.205] (**) evdev: ThinkPad Extra Buttons: Device: "/dev/input/event9"
[ 82.205] (--) evdev: ThinkPad Extra Buttons: Vendor 0x17aa Product 0x5054
[ 82.205] (--) evdev: ThinkPad Extra Buttons: Found keys
[ 82.205] (II) evdev: ThinkPad Extra Buttons: Configuring as keyboard
[ 82.205] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input9/event9"
[ 82.205] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 17)
[ 82.205] (**) Option "xkb_rules" "evdev"
[ 82.205] (**) Option "xkb_model" "evdev"
[ 82.205] (**) Option "xkb_layout" "de"
[ 82.205] (**) Option "xkb_variant" "nodeadkeys"
[ 82.222] (II) intel(0): EDID vendor "AUO", prod id 8510
[ 82.222] (II) intel(0): Printing DDC gathered Modelines:
[ 82.222] (II) intel(0): Modeline "1600x900"x0.0 110.00 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (54.7 kHz eP)
[ 82.222] (II) intel(0): Modeline "1600x900"x0.0 73.33 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (36.5 kHz e)
[ 82.415] (II) intel(0): Allocated new frame buffer 1920x1200 stride 7680, tiled
[ 106.807] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 117.740] (II) Open ACPI successful (/var/run/acpid.socket)
[ 117.740] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 117.767] (II) intel(0): EDID vendor "AUO", prod id 8510
[ 117.767] (II) intel(0): Printing DDC gathered Modelines:
[ 117.767] (II) intel(0): Modeline "1600x900"x0.0 110.00 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (54.7 kHz eP)
[ 117.767] (II) intel(0): Modeline "1600x900"x0.0 73.33 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (36.5 kHz e)
[ 117.959] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
I have connect my ThinkPad per Dockingstation Displayport (I try also DVI) with an NEC PA241W. It seems arch takes the 1600x900 resolution from the Laptop :-(
I dont know what to do makes the Kernel the Problem?
On my second PC i have there an Nvidia when i start arch for install all are perfect on my NEC i connected it with DVI
here is my xrandr
[frank@bullitt ~]$ xrandr
Screen 0: minimum 320 x 200, current 1920 x 1200, maximum 8192 x 8192
LVDS1 connected 1600x900+0+0 (normal left inverted right x axis y axis) 309mm x 174mm
1600x900 60.0*+ 40.0
1024x768 60.0
800x600 60.3 56.2
640x480 59.9
VGA1 disconnected (normal left inverted right x axis y axis)
HDMI1 disconnected (normal left inverted right x axis y axis)
DP1 disconnected (normal left inverted right x axis y axis)
HDMI2 disconnected (normal left inverted right x axis y axis)
HDMI3 disconnected (normal left inverted right x axis y axis)
DP2 connected 1920x1200+0+0 (normal left inverted right x axis y axis) 518mm x 324mm
1920x1200 60.0*+
1600x1200 60.0
1680x1050 60.0
1680x945 60.0
1400x1050 74.9 60.0
1600x900 60.0
1280x1024 85.0 75.0 60.0
1440x900 84.8 75.0 59.9
1280x960 85.0 60.0
1360x768 59.8 60.0
1280x800 84.9 74.9 59.8
1152x864 75.0
1280x768 84.8 74.9 59.9
1280x720 60.0
1024x768 85.0 75.1 70.1 60.0
1024x576 60.0
832x624 74.6
800x600 85.1 72.2 75.0 60.3 56.2
848x480 60.0
640x480 85.0 72.8 75.0 66.7 60.0
720x400 85.0 70.1
640x400 85.1
640x350 85.1
DP3 disconnected (normal left inverted right x axis y axis)
Does anybody have the same kind of connected an Laptop with an external Monitor and knows what was the Problem?
I like arch very much but so it doesnt make fun :-(
I hope someone can help me
the picture shows openbox with the Thunar maximized
Last edited by kerasi (2012-10-12 23:12:12)

@trilby
i use my Laptop at home 95% and at work 5%
so my first choice would be to have the perfect resolution on my NEC external and when i opened a window it would display there and i dont have to open my Laptop to move the screen to see it on my external or is it so that you must have opened the laptop display to move the windows?
And when i would take it at work it would be perfect if i see it on the laptop with his resolution 1600x900
i hope i explained it well.
@anoknusa
i change your config to this
xrandr --output LVDS1 --mode 1600x900 --pos 0x900 --rotate normal --output DP2 --mode 1920x1200 --pos 0x0 --rotate normal
when i start firefox it was displayes well on my external but when i opened xterm or thunar pcman i have to open my laptop and move from it up to the external do i make a mistake?
anoknusa wrote:I stuck that in a script to run when I start X; if the external monitor isn't plugged in, only the laptop display is used. This sets each screen to act as a seperate display; I can still drag windows between them if I wish, as well as assign windows to open on one screen or the other through DWM's configuration file. As mentioned earlier, this is also the only way (I think) to get each screen to display at its native resolution. Note that I specify the resolution for both my T520 LCD and my external monitor, and specify their positions (my external is mounted to the wall above my desk, directly above my laptop); change those as necessary.
what has xrandr to look like for my external monitor and laptop?
and what would the script look like for me?
external 1920x1200
T420 1600x900
and thank you for your patience and have a nice day
ps: i know iam very close to find a solution for my problem
Last edited by kerasi (2012-10-11 00:05:55)

Preview playback on external monitor problem!

Similar Messages

Maybe you are looking for