Preview Portal: Standard-GRS storage accounts appear as Degraded

Hi,
We have 4 storage accounts on our subscription (1 x standard LRS and 3 x standard GRS).
In the existing management portal all of them appear online and functioning normally, however in the preview portal, the 3 "Standard-GRS" storage accounts are listed as "Degraded" in the storage blade, and if we drill down to a specific
storage accounts blade.
I don't see any issues with Azure Storage reported on the status page, and the main management portal shows everything is good, so I believe this is a bug with the preview portal.
I hope this help,
Andy

Hi All,
Thanks for pointing this issue, this is indeed a bug, as far as I know, the storage accounts themselves are fine, this bug will fix later.
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

  • Copy .vhd from secondary storage account to another storage account in primary location (RA-GRS) enabled using power shell scripts

    All,
    Hope you are doing great. I have a storage account which is RA-GRS enabled. Which has couple of (IaaS based vms) .vhd. I have taken few snapshots on the VMs too.
    Queries:
    1. How do I copy the .vhds from secondary storage account to different account in primary location?
    2. If I copy the .vhds. Does it copy all the snapshots which was taken?
    Please advice. Many thanks!
    Regards,
    Swamy

    Hi Jambor,
    Hope you are doing great. I am facing a problem.
    1. Imagine I have a storage account with RA-GRS enabled. US East (Primary) and US West (Secondary)
    2. I have created a VM in US East and taken couple of snapshots. Which means the .vhd and its snapshot will be replicated in the Secondary location.
    3. Assume that Primary site is down. Not I want to read the .vhd and its snapshot from secondary and create VM in Primary location.
    4. I tried the below code but it is throwing exception 404 Not found.
    Please advice.
    Regards,
    Swamy
    $client.LocationMode
    =0
    $createdBlob=$client.GetBlobReferenceFromServer($theDestBlobUrl)
    Write-Output$createdBlob.SnapshotQualifiedStorageUri.PrimaryUri.AbsoluteUri
    try
    $createdBlob.BreakLease()
    catch{}
    $blobUri125=New-ObjectSystem.Uri($theUrl)
    $client.LocationMode
    =0
    $createdBlob.StartCopyFromBlob($blobUri125.AbsoluteUri)
    $blobReference=$client.GetBlobReferenceFromServer($theUrl)

  • Experiment submission failed. Request ID: ID . Please resync the access keys for storage account mystorageaccount

    I am trying to run Sample 1 in the Azure ML studio. I have created a Standard workspace and it is linked to a Storage account. When I run the experiment, I get the error
    Experiment submission failed. Request ID: <ID>. Please resync the access keys for storage account <mystorageaccount>
    I'm not sure how to resync the access keys. I've regenerated my access keys and workspace auth tokens but that did not work.

    I figured it out. Needed to go to the Azure Portal, choose the Machine Learning service, then click Manage Keys at the bottom.

  • How can I delete a storage account

    Hello,
    How can I delete a storage account from an expired trial account.
    When switch from a trial account account to a pay as you go account I forgot to delete the storage account.
    The storage and storage account is inaccessbile now.
    How can I delete the storage and the storage account ?
    Any help is usefull !
    Grtz Fred
    Tilburg-NL

    Hi Fred,
    The procedure to remove the disk image from the blob repository is:
    1.Go to the Windows Azure Management Portal.
    2.Click on Virtual Machines.
    3.Click on Disks.
    4.Click on the disk.
    5.Click on Delete Disk.
    After that, the storage account can be deleted.
    Disks are detached from a deleted VM asynchronously, it may take a few minutes after the VM is deleted for this field to clear up.
    Pleas follow the below the link to delete the storage account.
    http://stackoverflow.com/questions/10969012/how-do-i-delete-an-azure-storage-account-containing-a-leased-blob
    Regards
    Prajay

  • Can't create new Mobile App on preview portal

    Hi all,
    I'm really excited about the new Mobile App feature in the preview portal and want to get started on something. I went to the portal, clicked in to create a new Mobile App and entered the name and service plan then clicked create. The dots started blinking
    and then nothing happened. I've tried it in Safari, Chrome, and IE with the same results. I've tried it with private and non-private browsing. My account is a Partner subscription that allows $100/month in Azure credits. Has anyone else had this problem? Any
    idea how to mitigate it and get to coding my new mobile app? Thanks for any help!
    jared

    The restriction has been removed. You should be able to use any valid name for your resource group now.
    I was unable to create a mobile app using the defaults. I had to create a new service plan and Resource group.
    Also, the docs on resource groups give me a 404. I have no idea what a resource group or service plan even are.

  • Portal Favorites iView is not appearing !!!!!!

    Hi
    the Portal favorite iview is not appearing.
    We have transported all KM content from dev to test server.
    The Portal favourite iView itself is not coming.i have checked in Contemt Administration> KM content> root> entry point> favorites.
    the favourite folder is there, but iView is not appearing.
    Need help.
    Regards
    Disha

    Hi Disha,
    Check whether the Portal Favorites iView is enabled and set to Visible under
    Portal Content ® Portal User ® Standard Portal Users ->
    Tool Area iView and choose Open - > Portal Favorites
    Regards,
    Venkat.

  • Preview Portal: SupportSubscriptionDetailBlade_UnknownSubscription notification

    Hi,
    This isn't a problem as such - more of a "heads up" in case it hasn't been reported.
    For the last few days when we load up the preview portal we see a warning notification appear with the following text:
    Title: SupportSubscriptionDetailBlade_UnknownSubscription
    Message: SupportSubscriptionDetailBlade_UnknownSubscription
    This appears if we hover over the Notifications button, or when we load the Notifications blade.
    Thanks.

    Hi,
    I couldn't reproduce this issue, if you have detailed steps to reproduce this issue, please post here or submit to azure preview feedback:
    http://feedback.azure.com/forums/223579-azure-preview-portal , your suggestion are important for us to make the azure preview portal more better.
    Best Regards,
    Jambor
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • More than 40 disks attached in Storage Account container

    If I have a storage account container containing more than 40 vhds can and they are not attached to say VM1 can it impact VM1 in question negatively?
    For virtual machines in the Basic Tier, do not place more than 66 highly used VHDs in a storage account to avoid the
    20,000 total request rate limit (20,000/300). For virtual machines in the Standard Tier, do not place more than 40 highly used VHDs in a storage account (20,000/500). For more information, see Virtual
    Machine and Cloud Service Sizes for Azure.

    Hi,
    If you exceed the azure storage quote, and one of the VHDS is attached to VM1, as far as I know, it will impact performance, if all the VHDS is not attached to VM1, I think the VM1 is no business with this storage.
    Best Regards,
    Jambor
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Unknown high data transfer on storage account

    I have an Azure subscription from MSDN Ultimate (running on the old pricing model). There, I run two VMs (West Europe). Both have their VHDs stored in the same storage account (also West Europe). It is geo-redundand by default (didn't change it).
    The first VM has been running fine for some weeks without issues. But since a couple days ago when I started the second one, something weird happend.
    On my billing details I do now get rows like this:
    "All Services",...,"Data Transfer In (GB)",...,"Storage",..."mystorageaccountid"
    "All Services",...,"Data Transfer Out (GB)",...,"Storage",..."mystorageaccountid"
    Today it said 171 GB in and 31 GB out! Note that it attributes this to the storage account and NOT to the VM. Also VM dashboard shows basically no in/out values (which is correct).
    I do not use CDN or any other Azure feature (at least I'm not aware of it). I do not acces the storage account in any other way than by the VM. The VM itself may be writing/reading from its VHD in a quantity that fits the above figures, though. However,
    I learned that there is no bandwith charge for GRS.
    How can this happen / how can I prevent it?
    My first guess is that maybe it's because I put the second VM's VHD on the same storage container. But on the other hand, it's all in the same region...
    Thanks for your help!
    David

    Hi,
    For this billing question Please contact support team by creating a support ticket at
    http://www.windowsazure.com/en-us/support/contact/
    Or if that doesn't work because you don't have an active subscription you will need to contact general customer support to have them create a support ticket for you
    http://support.microsoft.com/gp/customer-service-phone-numbers?wa=wsignin1.0
    Best Regards
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Logon Portal Image (custom) is´nt appear on IE8 browser

    Hi,
    I'm on a SAP NW Portal 7.01 SP10, and I have an issue with the image on the logon screen. The image does not appear with IE8, but when I call the portal on IE9 the image appears and the logon screen renders just fine. The image I refer to on the UME propertie branding-image is a custom image, not the standard one. I dont know why this could happen, please help
    Regards,
    MC

    I've uploaded the images with the custom logon's PAR. All work fine now
    Regards,
    MC

  • Adding users to roles in the new preview portal (new RBAC feature) does not work

    When I click the Invite Users/Add button for any of the 3 roles in the new preview portal, the page doesn't load and instead, it instantly redirects to an HTTP 520 error page. Can anyone please look into this and fix it? It's been this way since last week,
    which is when I checked it out but it is quite possible it has been this way for longer.

    Hi,
    It seems there are some issues in azure preview portal, please note this portal is in preview version, if you find some issues, please try to contact with azure experts, here is azure support channel:
    http://www.windowsazure.com/en-us/support/contact/, it is a good choice for you.
    Sorry for any inconvenience.
    Best Regards,
    Jambor
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • When opening my Outlook 2010 with new added e-mail account with Exchange Server, I have to click manually on my standard e-mail account for checking mail

    When opening my Outlook 2010 with new added e-mail account with Exchange Server supplied by my employer, I have to click manually on my standard e-mail account for checking mail. Do I have to upgrade my Microsoft Office 2010 or how can I make my Outlook
    2010 check all my four e-mail accounts without manually click on my accounts?
    Sincerely
    Ketil Hothorp

    Hello Ketil,
    Good Day...
    Seems to be the Issue is Syncing emails, now I would recommend you to Remove and Add the Account and try and check if the emails are getting synced automatically.
    Hope this is with Single User. If it is with Multiple Users then we need to check the permissions assigned.
    Regards,
    Praveen

  • How do I get my itunes to recognize my account, it seems to be stuck on my friend account even when it sent my ID in the account, only when I try to update an App, that my friend account appear.  Please advise

    How do I get my itunes to recognize my account, it seems to be stuck on my friend account even when my ID show up as sign in, only when I try to update an App, that my friend account appear.  I try to reset it on the computer and the phone itself, but no luck.  Please advise

    Many thanks lllaass,
    The Touch Copy third party software for PC's is the way to go it seems and although the demo is free, if you have over 100 songs then it costs £15 to buy the software which seems not a lot to pay for peace of mind. and restoring your iTunes library back to how it was.
    Cheers
    http://www.wideanglesoftware.com/touchcopy/index.php?gclid=CODH8dK46bsCFUbKtAod8 VcAQg

  • HT3228 How can an email notication from my account appear on another mac?

    I was sitting with a supplier, and as we were working an email notification from my email account appeared on her desktop.
    We have set her up with an email address with our business, but she is a supplier, and totally unconnected - even on a different site.
    I have confronted her, and asked if she is hacking into my company emails, and she denies any knowledge.
    She has asked a technical adviser, who says 'it could be a technical glitch' but I am not sure.
    I think she has set up my email account by guessing the formula we use for passwords.
    Can anyone help? Have you experienced this? Can you back up the 'technical glitch' explanation?
    (We use POP accounts on MacMail).

    your mail provider or IT dept may be able to provide records of connections to the account, which you can check against your own access.
    Assuming you mean that her Mail application showed an email addressed to you & no-one else - then it sounds as if you ought to change all passwords & ask whoever admins company email to confirm that it wasn't somehow sent to her account too, unlikely though that seems.

  • Just bought an iPad 2 and plugged it in to my home PC and downloaded apps using my wife's iTunes account.  I then set up my own iTunes account on my  office PC, and none of the apps I downloaded in the new account appear on my iPad.

    I just bought an iPad 2 - I plugged it in to my home PC and downloaded a couple of apps using my wife's iTunes account.  Since I bought the device for work, I then set up my own iTunes account on my office PC.  The problem I am having is that none of the apps I downloaded in the new account appear on my iPad.  I can see them on screen #2 in iTunes and I know how to swipe to get to that screen.
    I've tried everything mentioned - I authorized my office computer (but not my home one - could this be the problem?).  I turned on home network file sharing.  Checked to make sure parental controls are off.  I'm not sure what to do next.

    When you installed iTunes on your work computer, then connected your iPad to that computer, it wiped what was on the iPad, then put the iTunes library (nothing) from the work computer onto the iPad. You can try copying the iTunes folder from your home computer over to your work computer, but since the apps were bought with a different account, they may not load or update properly.

Maybe you are looking for