Preview/Presenation mode

What is the Best way to Create a DVD with Preview/Presenation mode with the presenation mode going to a black screen before the clip and after with the user haveing to hit enter to activate the clip and then back to the menu at the end.

Hi James
The way I'd do it is when you hit the presentation button, it takes you to another menu that is a black screen with an invisble button - when you press enter the button targets the video, which the endjumps to another black menu with an invisible button which takes you back to the main menu. You could use some scripting here to do everything with the one black menu and depending on the length of your video you'll probably need to use scripting to differentiate between the presenter mode and the regular play button.
Cheers
B

Similar Messages

Preview "Slideshow Mode"

Hey everyone,
When I view a PDF in "slideshow mode" in Preview, I miss two features. Maybe I am blind and you can point out what to do:
1) The PDF always opens up on the main screen (I have a second screen attached to the MacBook, which I normally would use for a presentation.. Think of a projector..)
2) One cannot use the Remote Control!? How come I can use it in virtually any other program, including Keynotes etc. but not for simple PDFs?
If this shouldnt be possible with Preview under Tiger, is it possible with Leopard?
Cheers,
-Hendrik

Thanks for your swift reply M.
I think I should've been more clear in my post. I'm used to using the arrow keys on my keyboard for flicking through the pages of the pdf and this doesn't work when entering slideshow-mode, it used to work in Tiger.
Your solution is similar to the "Index"-sheet thing I used to do. When you hit the play-button you can't immediately start browsing the pdf, you have to wait until the second page loads, right? After that the arrows are working as they should, I think this behaviour should be initiated immediately upon entering the slideshow-mode.

Is there a way to quickly preview blend modes, similar to the shift+ and shift- like AfterAffects?

This would seem to be a no brainer but nobody seems to know the answer.... I have a hard time believing I have to endure the sea-saw process of clicking on a given blend mode each time I want to preview an affect.

The next issue you will find with Blend Modes is "Opacity Droppings"
Anyone that uses Blend Modes...naturally uses Opacity as part of the setting. ie. the degree of blend.
(The two work hand in hand.)
Problem is.. as soon as you do this... an automatic opacity keyframe is created.
This is guaranteed to drive you nuts!
It does not work this way in AEFX . where it is more logically and practically implemented with a normal way of setting a keyframe manually.

Triggers in Slide show widget jumps around in preview/published mode

I am using the slide show widget.
Have made triggers with different states.
In design mode they are perfectly aligned but in preview and after publishing, they jump around.
design mode
after publishing and in preview mode

What's the URL for the page? (You could publish to a free trial site on Adobe Business Catalyst and provide the URL...)

Hyperlinks Don't Work in Preview/Publish Mode - Correct in Design View

I am having trouble with hyperlinks. I've deleted existing hyperlinks, then copied and pasted addresses back in but it is still not working. Any idea why this is happening.
www.ronbrendle.com/reviews.html
To the right of each album the links for amazon, itunes and cdbaby do not work. They DO work for the Bunky Moon album but I cannot discern any difference. In Muse design view, the hyperlink addresses are correct when I select the amazon, itunes or cdbaby element.
Also - when I copy a page URL from this site - it pastes the title tag. For example:
www.ronbrendle.com/reviews.html becomes "Brendle is a monster bassist." JazzTimes
Please help if you can.
Thank you,
Deanna

I found this bit of information here ( http://www.cs.wright.edu/~jslater/mac-tex/mac-tex-intro/mactexintro.html):
Adobe Reader (I wouldn’t)
Adobe Acrobat (Not this either)
Preview (Maybe better)
Skim (Awesome, my pick)
TEXShop - Works well as a viewer-only with extra tools
iTEXMac - Also works well as a viewer-only with extra tools
OzTEX (if not using PDFLaTEX)
CMacTEX(if not using PDFLaTEX)
MacDVIX (if not using PDFLaTEX)
If PDFTEX is used, any PDF(R) viewer can be used, but hyperlinks don’t work in viewers using Apple’s(R) PDF code (e.g. Preview, iTEXMac, TEXShop, Skim...), so you may want to have Adobe Reader(R) or Acrobat installed to test your hyperlinks.

Report 10g - Preview - Character mode

I have a lot of character reports (6i), which have to be print to a dot matrix printer. In 10g there is no more preview of report. Instead of the preview , i was thinking of creating a mimetype for a file .wri and open the result in wordpad at the cliente side. The user then prints do the printer. But when i print via wordpad, the escape character doesnÂ´It seems to work.
I've tried orarrp also, it works printing directy to the printer, but there is no preview.
Is there another way to solve this?

hi there
go to property inspector of report and set correct setting in charactermode category.
hope this helps
asp

Error when viewing PO print preview - function mod /SDF/AL_MAP_TRANSID_LOGH

Hi all,
I wanted to use smartform '/SMB40/MMPO_L ' for PO print out.
I configured the driver program '/SMB40/FM06P' and the smartform in the tcode NACE.
But when I hit the print preview button on ME23N. I am getting this error
Function module /SDF/AL_MAP_TRANSID_LOGH does not exist
What is this function module?
what might be the problem?
How can I solve this issue?
Thanks,
Goldie.

Hello,
have u got the solution for this issue?
I am having similar pop up error msg but it is in BW system!
Any thoughts why the system is throwing this error msg?
Raj

OS X Lion finder crash on show preview column mode

Hi.
I need help for the finder problem.
I have been used osx series finder in column view.
when i select a file such as a.txt or a.php etc... and it shows preview column and then
the finder crashs and restart itself.
it's really annoying me.
I think it has something wrong wirh file extension.
can anyone help me with this please.
thank you.

Hi.
I found a solution for this problem but it is not that great solution.
I guess The problem is relate with totalfinder. because i reinstall(clean install) osx lion, the problem had been fixed but after that i installed old version of "totalfinder". it happens again....
now i reinstall the lion again and install the newest version of total finder. it's fine now,
so...
the solution is reinstal(clean) the osx lion.
im pretty sure it will be fine.
good luck!

Correctly Hide Edit Mode Elements in Preview Mode

Hello,
I wanted to know how I should modify the code below to correctly show content in the correct mode? The code below works, but when switching to preview mode, I have to manually refresh the page to get the "Preview/Publish mode text" to disappear. I'm aware I could modify the sidekick to force a refresh, but I'd prefer to do it similarly to how CQ does it (eliminate all edit mode components immediately without refreshing the page). Thoughts?
import="com.day.cq.wcm.api.WCMMode"
<%
    if ((WCMMode.fromRequest(request) == WCMMode.EDIT) || (WCMMode.fromRequest(request) == WCMMode.DESIGN)) {
        %><div>Edit mode only text</div><%
    } else {
        %><div>Preview/Publish mode text</div><%
%>

Hi,
As the above code is evaluated server side and edit/preview is triggered client side this approach will not work for you.
You could use the fact that CQ is adding "cq-wcm-edit" class to page body in edit mode and "cq-wcm-preview" in preview and hide your divs by CSS.
Br

Disappearing Shapes/images/type in Preview Mode: InDesign CC

Having issues of parts of my designs "disappearing" when toggling from Normal to Preview Screen Modes. Everything is intact when in Normal Screen Mode. However, certain shapes/lines/type/images will not be visible in Preview Screen Mode or exporting of any kind.
Please help if you have any insight - this is driving me crazy!
Thanks,
Carrie

Sounds most likely that they are on a non-printing layer or have been set not to print at the object level in the Attributes panel. The other possibility is they are using a blending mode that would cause them to disappear against a background, or they might be white objects created in Illustrator which allows the overprinting of White if the color was changed from something else set to overprint (ID is smart enough not to do that).

I am unable to get same preview image colors in Bridge and Lightroom

I am unable to get same file preview in Bridge and Lightroom. The Lightroom preview image (in both the Library and Develop) is more de-saturated. But the exported/saved jpegs match. If I try to match the Lightroom preview image to the Bridge preview image, the resulting Lightroom export colors are off. I have tried this with images with no changes and with changes and the result is the same. I have Lightroom 5.6 and CR 8.6. I am using the latest version of Bridge.
I contacted Adobe support and followed all instructions to try to fix but the problem remains. This comment was made after several solutions were tried, including updating Lightroom. :
Adobe: there would be little difference in case of preview of Bridge CC and Lightroom 5. However, after exporting it would be same. Both use different technology at the background and work in a different way. The preview which you see in lightroom is not the actual image but incase of Bridge you see the actual image ( original ). That's the reason there is a color variation between previews.
Me: But how can I then use the Lightroom preview to get accurate colors when processing a RAW file? If I do adjustments to the RAW file in Lightroom it looks different when exported. That doesn't seem to make sense when Lightroom is designed for photograhy
Adobe: Please check in develop module of lightroom.
Me: Nothing changes in the develop mode. The image looks the same as in the preview/Library mode.
This screenshot shows the unmodified images in Develop (Lightroom) and ACR (Bridge). The color differences are significant.
Lightroom exported jpeg file, unmodified from preview image in Develop (which looks like Bridge preview image not the Lightroom preview)
Bridge saved jpeg file, unmodified from preview image in ACR
Any suggestions on what I need to do to Lightroom to make it show accurate colors. If not, I don't see any point in using it to process files.
Thanks, Marie

Bridge is just a browser. It displays according to the embedded color profile but assumes sRGB for all untagged images.
In Lightroom library previews use Adobe RGB and in Develop the working space is Pro Photo RGB.
The real question is why use both Bridge and Lightroom. Stick to one, not both.

Embeded Videos no longer show up in Dreamweaver CS5 Peview mode

I am having a technical problem with Dreamweaver. the website I
have been working on for the past 4 months has a lot of videos embed off of
YouTube and all has been fine but for a reason that I cannot figure out two days ago. The videos I was
embedding of YouTube stopped showing up in the preview mode of Dreamweaver in
any browser. The grey box. Is still there in Design mode, but not in preview.
Mode. Just A note any video embedded prior to two days ago still works fine I have fried the following
Tried 3 different browsers Crome Mozilla and IE
Tried 7 different videos off of YouTube
Tried to embed a previously successful video that had worked off of YouTube
Tried a different authoring programs(Kompozer,Frontpage)
Tried testing the files on a browser on another computer
I have even tried switching to Dreamweaver CS6
None of this options have worked at fixing the problem but my new website
will have lots of videos and I need to preview them in the browser any
suggestions would be great.
Chris Mason

Is your src in the 'iframe' for youtube like this?
src="//www.youtube.com/embed/agiu6koSU4k"
Change it to this and save it locally and preview it locally in a browser to see if it works:
src="http://www.youtube.com/embed/agiu6koSU4k"
If it does, you can use the same copy online on your server as well.
Thanks for your feedback.

6i character mode report migrate to 11g , printing result were incorrect in the same matrix printer?

Hi All
We got stuck when our 6i character mode report migrate to 11g.
We use the same PC to test, when run 6i report(character mode with 200 column) in legacy system, report result were correct in our matrix printer ,
When running in 11g, if we directly print report via report builder (without preview), result were correct.
But running report via preview/screen mode, printing result were incorrect ( not 200 column width).
We try to adjust PC's printer/paper setting , but our-defined printing option never appeared in printer dialog.
Is anything(config or some setting) we forgot to do in this situation ?
Thanks for all your patient response!
Hendry

Hi Shahmayur,
I too am facing the same problem. If your problem is cleared then please let me know, so that i can continue the work.
Rgds
Bhaskar

Internet Explorer Security Settings for Previewing in Developer

Hello Marc,
I just 2 weeks new to UPK. I just switched over to a new laptop and now when I try to preview UPK in try it mode (local install), I receive an error message that says PREVIEW CANNOT OPEN "preview requires intranet settings to be enabled. These settings are located on the security tab in the Internet Settings of Internet Explorer." I current use IE 7.0. Can you advise which settings need to be changed?

Hello,
For See It! and Try It! mode preview you will need to do the following:
Tools > Internet Options > Security (tab) > Local Intranet (icon) > Sites. Check all of the boxes. “Automatically detect intranet network” must be unchecked for the other buttons to be available. Once you check everything, you can re-check “Automatically detect intranet network”.
For Do It! mode preview you will need to do the following:
Tools > Internet Options > Security (tab) > Local Intranet (icon) > Custom level... Scroll down until you see the option for "Allow script-initiated windows without size or position constraints" (a little more than halfway down) and set this option to Enable.
This should allow you to properly preview these modes in the UPK Developer.
Best regards,
Marc

Camera Raw 8.4 beta Preview facility

In Camera Raw 8.4 the three new Preview buttons (Mode, Swap and Copy), at the bottom right hand corner of the image area, enable comparison of the image before and after adjustments in ACR. However, the buttons show the accumulative changes which have resulted from the progressive use of the individual Panels (ie: Basic, Tone Curve, Detail, HSL / Grayscale etc). How do I see and evaluate the specific changes which I make with regard to each individual Panel: in other words, can I turn on /off the effects of each individual Panel without affecting the changes I have made with the other Panels? I am aware that I can do this for local correction changes with the Adjustment Brush by right clicking on the relevant adjustment pin, but how do I do evaluate the adjustments I have made for each of the individual main Panels?
Thom Hanahoe

> I don't accept the new
resistance is futile, bro...

Preview/Presenation mode

Similar Messages

Maybe you are looking for