Preview problem after close PREMIERE

Hi everybody.
I´m using premiere pro cc 2014. It´s working perfectly when I create my project the first time, import my clips, audios and everything. I can work with no problems, but, after close the program, when I open again the last project to continue editing there is a lot o lag on preview.
All medias was loaded, there are no error, but the preview on timeline is terribly lag.
It just happened few days ago, could it be some update?
Thanks a lot.

Hello Sunny
The spacing issue, or print preview differing from actual output (with
actual output printing correctly) is a known issue.
The reason for the issue is that a new previewer for Smart Forms and
SAPscript is required and this is what is delivered in the
aforementioned notes 1552498 and 1562096.
The existing solution can't gaurantee exactly previewed and printed
space intervals (due to the automated font's selection and stretching).
So this is where this new PDF Previewer is designed, to resolve the
issue you are seeing with the old regular print preview.
Hope this helps,
Jude

Similar Messages

Intermittent problem after launching Premiere Pro CS6.0.2 - audio pitch dropped and video staggering

Intermittent problem after launching Premiere Pro - all audio is lower in frequency by very noticeable amount and video keeps dropping back a few frames every few seconds, apparently trying to keep in sync with slower audio.
This does not happen consistently, perhaps every 5 or 6 launches. Otherwise program works normally after launch and sometimes a quit and relaunch will fix the problem.
Have submitted bug report but wondered if anyone else having the same problem?
Mac OSX 10.8.4 iMac 3.4 Ghz Intel Core i7 32GB

Well if i do that, the video will raise up GBs larger (and that is really bad).
Why is it really bad?
Its a fact of digital life. High datarate = quality.
example ...even the Youtube preset is in the 8mpbs area.
...and you are exporting 1 hr 35mins of media.

Camera raw 6.6 and 7.0 preview problem after done "click" in bridge

Hi,
when i update camera raw from 6.5 to 6.6 the preview can`t give me right preview after 1 adjustment in camera raw.Image apears like when we open it in camera raw and the first few seconds with the yellow exclamation mark.
Months ago the only solution i found after several reinstals of phoshop, was to turn back to camera raw 6.5.
Now im trying beta bridge cs6 and problem come back for me again.
I use Nikon D3x with 14 bits ~49MB .nef files with Windows 7 64 bits .
Is any one have same problem?And why only in 6.6 (and new camera raw 7.0) and not in 6.5?
Thanks
Arménio Teixeira

Istrasoft wrote:
Just out of curiosity, what was so awfully penalizing reponsiveness in ACR 6.0 ?
And, does Lightroom use the same internal 8bi plugin file to do the processing or do I have tu update Lightroom separately to get the responsiveness back ?
I don't know what they did, but I assume they rewrote some of the code which deals with some of the new process calculations and previewing, to be more processor-efficient.
Lightroom doesn't use the plug-in, as far as I know. I'd guess that would need a separate update. I haven't got it. You could tell us if it's any faster.

Print preview problem after SP upgrade in ECC 6.0

Hi Everyone,
We have recently upgraded support packages in our sap system. During tetsing we have come up some issues with print preview in sp01 transaction.
If we click on print preview This is missing a lot of the formatting e.g. lines and logos. However, the printout does have elements. Please find below system information and sp patch details.
System Details:
SAP Version: ECC 6.0
Database: SQL 2005
OS: Windows 2003, SR2, 64 - bit.
Kernel Patch: 221
SAP_BASIS:19
SAP_ABA :19
SAP_APPL : 16
SAP_AP :17
SAP_HR : 51
SAP_BW : 21
PI_BASIS 2006_1_700 : patch 009
ST_PI: ST_PI 2005_1_700 : 006
FINBASIS : 16
LOSFE: 16
Please let us know if any one have experienced the issue?
Thanks & Regards,
Vinod

Hi,
Have you checked your printer output device configuration in SPAD ?
Device Type?
Access Method?
Regards,
Bhavik G. Shroff

Problem after Adobe Premiere Pro 5.5.1 update

I jsut installed this update along with any other for CS5.5 - now PP crashes everytime I use ultrakey??? On MAC can I revert to previous PP (ie. remove the update)??

yes - sorry I was off one update - I updated to 5.5.2 from 5.5.1

After updating Premiere to 4.1 - XDCAM EX error- files offline?

Hi!
I have a problem; after updating Premiere CS4 ver. 4.0.1. to version 4.1 files in projects are offline. There are some files (for example, CG animation in other formats as quick time) that are on timeline normally, but all XDcame EX footage is offline. That usually happened with external disks changing letter names, but the letter for disk is the same.
What to do? The problem is that I have about 1.000 clips and they're all structured in subfolders, that means that each file is in its own folder due to xdcam EX file structure and it's quite impossible to link each of them manually (or it will take 2 days only clicking on every file).
Agrhhh... once again dealing with Adobe's "improvements".
One more thing; when trying to link file, i get "The importer reported a generic error"!?
And I've just found out that there's no xdcam ex presets anymore in Premiere. How to get them back?
Thanks,
Ziga

Hi!
Well, after 4 hours of problem-solving I figured out that the main issue was that 4.1 didn't support xdcam-ex anymore. Furthermore, when reinstalling premiere back to 4.0.1 it couldn't open a project (looks like 4.1 did something to it I guess), so final solution now was to open an auto-save project, which has just opened.
Probably there is an issue with production premium to be first installed as a trial. The solution might be to uninstall all the programs and clean the registry and install it back directly with serial number. But it takes time and I have to finish project today.
I'm really confused about Adobe's solutions in last few years; every new file/software/update they provide solves 1 old problem and gives 10 new problems.
Now it's a big mess but luckily the project is now open at least. I really do not recommend anyone to update to 4.1 because of huge problems you might have with files, at least not to do it during the work on a project.
Regards,
Ziga

CS4 Premiere Pro General file format & preview problems

I was redirected here after posting my complaint on Twitter, so please excuse my forum manner.
I've been using Adobe Premiere Pro (CS4) for about a year now, and I've been editing videos along with other packages with no problem. (Only problem being my slow processor). Up until last week Premiere Pro has been completely fine. But seeing I have a project deadline next month, I thought I would spend a day trying to kick-start the video editing.
My source videos were originally photograph-frames animated in Flash CS4 into .MOV, decided to use the H.264 output codec. As I have finished exporting my needed videos, I imported them into Premiere Pro as usual, as I have in the past. But then I encountered the common problem that I have seen quite a few have also encountered with .MOV, or jsut general "no-preview" problem when the source video is fine.
I then took a day to research online about Premiere Pro's compatability with .MOV, among other container and formats. Upon using softwares such as MediaInfo and GSpot, I found that there might have been a problem with missing Codecs within my Adobe package. I then tried to convert the .MOV into .MPG (mpeg2), hoping such standard codec would work with Premiere Pro as they they in the past. No result avail.
I then turned to the uninstall route (retaining user info) and re-installing. The problem has NOT been fixed, what's more is that it crashes almost instantly after I try rendering the workplace. (Even post-rendering does not show the preview, but the files in the Adobe folder, does). Here's a screencap to my latest workplace, if it helps:
[IMG]http://i86.photobucket.com/albums/k83/neo0031/AdobePreProcap.jpg[/IMG]
Before the re-install, I believe I was running Premiere Pro CS4's latest update (4.2.x) something, now it is back to 4.0.0. But I don't think that is where the main problem is? I recently changed my locale from a certain language to Japanese to run a certain program. Would that be causing the problem(s)?
Does anyone know a way that I can FIX this? Any help is appreciated and I thank you all in advance.
I am using a Sony Vaio NS series laptop,
a 2.0 GHz Intel Pentium Dual Core processor
3GB RAM,
intergrated graphics Intel Chipset Family Series 4( I think).
Windows Vista Home Premium 32bit.
I tried moving the Scratch disks from an external portable hard drive to the local hard drive, to no result.
Again, any help is appreciated. I would appreciate direct advice rather than links. Thanks again.
Neo.

I have updated my CS4, Ppro to 4.2.1. The problem still remains. Would it have anything to do with my project setting? I don't have much knowledge to setting one up. The difference between the AVC projects and etc?
EDIT : I took the problem to my lecturer, and he didn't do anything out of the ordinary, but his "magic touch" click on the preview panel (Main composition) has made the video show up! But even after render, it won't play. But scrubbing along frames is now fixed. Any idea what's causing the no-preview-playback?

After effects & Premiere Pro CC problems -HELP-

Hi everyone,
I'm having some slight issues with after effects and adobe premiere CS6 CC on my notebook.
I downloaded the CC and can install all the apps, and every app (photoshop, illustrator, mediaencoder etc all work.
My notebook specs:
8GB ram
Nvidia 840M
(It says there is an integrated graphics aswell, maybe this could be the issue? that AE and Premiere select this one instead of the 840M)
Samsung evo 250GB SSD (Bootup drive and this is where CC is installed)
500GB HDD 7200rpm
For after effects:
When I run AE it starts the loading screen, but it crashes almost right away when it says "Initializing Mediacore" and gives this error:
After Effects error: Crash in progress. Last logged message was: <7304>
<GPUmanager> <2> Sniffer Result Code 3
(Error code 0 :: 42)
I think it has something to do with my VGA drivers, but I have uninstalled all the Nvidia and Intel drivers and installed both the newest and previous versions of drivers. But none fixed the issue.
Now heres where it gets interesting. yesterday I decided to test if a cracked version of AE CS6 worked on my computer. And it did, it openend smoothly and everything worked as far as I could test.
After testing I unistalled the cracked version (completly wiped everything), and reinstalled CC. But still no luck.
As for Premiere, the moment the loading screen pops up it says "Adobe Premiere CS6 has stopped working". All I can click is cancel, and when I do it just closes Premiere.
I saw a thread where someone said the issue was Nvidia geforce Experience. But even when I don't install this AE and Premiere don't work.
hope I gave you all enough information!
thanks for your time

read below
-http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modules.html
-http://forums.adobe.com/thread/1001579
-Use BIOS http://forums.adobe.com/thread/1019004?tstart=0
-link to why http://forums.adobe.com/message/4685328
-http://www.anandtech.com/show/4839/mobile-gpu-faceoff-amd-dynamic-switchable-graphics-vs-n vidia-optimus-technology/2

Problem importing adobe premiere project into After effects CS6

I've been working in Adobe's premiere and after effects for quite a few years now and this problem is new to me.
I'm working on a project in After Effects CS6 and want to import a premiere pro project into After Effects. I go -> File -> import -> adobe premiere project
Select project
Select sequence
Now After Effects CS6 imports all files from the premiere pro project like before in CS5, but now also imports the videofiles as sequences at the root in my project panel and messes everything up. Before it usually imported nice and tidy with the same folder structure as the premiere pro project would have.
But that isn't the main problem. When i open the sequence i wanted to import and work on, some clips have been shortened down to 1 FRAME LONG at the end. These clips have a 500% speed in premiere pro, but this has never been a problem before, after effects has always before been able to translate the speed variations in clips from premiere -> after effects.
The adobe premiere project that was imported is a 60 sec promo with various clips in various formats (Gopro h264, dv pal quicktime etc). Footage not exceeding the fair amount that after effects should handle. 15-20 videfiles at 30 sec each.
I've never had this problem before with premiere <-> after effects.
Anyone?

I just found the solution!
In my adobe premiere project that i was trying to import, some of the clips were "right clicked" and applied "Scale to frame size"
Every videoclip that had "scale to frame size" in my adobe premiere pro sequence would import as its own composition in After Effects rather than just a videofile, and some of the clips would be trimmed down to be invisible.
So if you have any problem with a clip not importing correctly into a sequence in after effects, check to make sure "scale to frame size" is not applied to the clip in premiere pro.
I removed the scale to frame size in the premiere project and now everything imports fine into after effects.
Sorry for the post.

After Effects CC 2014 (13.0, 13.1, 13.1.1) and Yosemite RAM preview probleme

"We are aware of one issue regarding RAM preview in After Effects on Mac OSX v10.10: When a RAM preview begins to play, the first several frames of the video will not play the first time through; subsequent loops through the same RAM preview duration will play all frames."
when will it be repaired? in the next update?
thanks

paulo freitas wrote:
"We are aware of one issue regarding RAM preview in After Effects on Mac OSX v10.10: When a RAM preview begins to play, the first several frames of the video will not play the first time through; subsequent loops through the same RAM preview duration will play all frames."
when will it be repaired? in the next update?
They have said that it is set to be fixed in the next update. Which should be within the month, if I'm not misremembering.
EDIT: I was misremembering. It is an issue that they're aware of, but are still working with Apple to try to find the source of the problem and, thus, the fix.

RAM Preview Problems in After Effects CC

AE CS 6 RAM Previews work, but two problems to report with AE CC on the same computer. Possibly two faces of the same problem.
1. Having QuickTime Player open while doing a RAM preview makes the RAM preview stutter. I quit the player, and now the RAM preview plays back without dropping a frame, though Info palate shows "fps: 24 (realtime)", but the RAM preview playback is slow: ie, a tenor sounds like a baritone.
2. A RAM preview that looked and sounded fine last night, is now playing back slowly (tenor sounds like a baritone), though Info Palate shows "fps: 24 (realtime)". I have no other applications open. The only thing that changed is that I quit AE, slept the computer, slept a little myself, and then launched AE. Trashing the cache files (manually), rebooting, relaunching and re-RAM-previewing creates a functional RAM preview, so I assume there is some problem with the cached files or the retrieval of them.
Is anyone else getting either of these? If so, what is your system configuration?
Also, I posted on another thread that Quicktime import/render works with AE CS6 on this computer, but AE CC can not import, play, or render QT reliably (without throwing error messages). Perhaps all of this is part of the same problem.
Thoughts?
Cheers,
Benjamin
CS 6 CC | Mac OS 10.8.4 | MacPro5,1 | 96 GB Ram | PROJECT & MEDIA drive: Mercury Accelsior > 500 MB/s read/write | CACHE drive: Mercury Accelsior > 500 MB/s read/write | Nvidia Quadro 4000 Mac | CUDA Driver: latest update | Wacom Intuos 5

96 GB RAM is accessible in 10.8.4 on my machine according to OWC. I'm working on a stereoscopic 4K project with large files and hundreds of layers. I regurlarly render with AE MP while working with huge files in PS, and am glad to see the % of RAM AE uses displayed in my render cue between 3 and 60%.
I have 12 processors (24 with hyperthreading)
I have reserved 10 for other applications leaving 14 for After Effects
4 GB per x 14 = 56 GB for AE. leaving 40 GB for everything else
I've played with what and how much I have allocated being sure to keep the CPU counts even, but this does not fix the RAM preview problems described above. Any other suggestions?
Thanks,
Benjamin

Sound problems after export media in premiere pro cs6

hello,
i recently started usining premiere c6 and after exported my project to mpeg-dvd i noticed that sound quality is reasonably lost, than exported sound separatedly without video to wav and result was the same bad. The imported sound source was really good, recorded in studio- wav 24 bit 48000. Before i used cs3 and never had such a sound problem after export video.
thank you very much,
Poly

It's difficult to speculate without hearing the original and the export. Can you upload them?
https://www.depositfiles.com/en/

Just wondering if I'm looking for something that doesn't exist - can firefox automatically close the "print-preview" window after printing?

I'm using the addon in my firefox toolbar to print preview website data then append to a pdf file. Sometimes I am distracted, then can't remember if I've gone through the process and printed/appended the page to the file. It would be helpful if there was a way that the print preview window would close after printing thereby confirming that the process has completed. Thanks in advance.

Thanks for your reply.
I'm running different versions of firefox on different computers. I'm aware of the upgrade procedures. Same issue in later versions as well.
The add-on is called "Print Preview Button 0.5" by sindre-wimberger which I obtained through the "Search Mozilla Support"
However, that's not really relevant - to bring this back to basics the same situation occurs if you do <File> <Print Preview> then print the document. The print preview screen remains until manually closed. Perhaps there is a setting in "about:config"? Does anyone know if this is so? There is an entry "print.whileinprintpreview" but not sure what setting does here. Suspect if set to "False" then you probably wouldn't be able to print from "Print Preview" screen.
Thanks.

Why am I facing so many problem after upgrading to ios7, my phone hangs/stuck many times, applications just stop working and close themselves, battery drainage,Facebook and all applications don't work properly. What should I do? They punished me for upgra

I'm using iPhone 5
Why am I facing so many problem after upgrading to ios7, my phone hangs/stuck many times, applications just stop working and close themselves, battery drainage,Facebook and all applications don't work properly. What should I do? They punished me for upgrading to ios7. I now hate apple and I'm thing of getting samsung.

Basic troubleshooting
Reset
Restore with backup
Restore as new ( better )

Preview problems, Premiere CS5 Windows

Hi!
I´ve been using Premiere for 10 years, so I should know it pretty well, but this is my case:
I start Premiere, choose "New project", tried different sequence settings, but the DVCPro HD 25 (PAL) is the most relevant. Inside Premiere, I import a clip, and drag it onto the timeline. So far, everything´s normal. The problems starts when I press the space button for preview. The only thing´s happening is the play symbol changes to a stop symbol in the composition window. No timecode´s running, no moving marker, and only a still image in the composition window. I can jog it frame by frame, and I can move the marker, and everything is fine, but also no playback. The play button in comp window does not make a change.
My next problem is to get this version to work with my Black Magic Decklink Extreme. I have an output signal, but no picture.
My system:
Pentium i7
12GB RAM
Win 7
Anybody?
Erik
Norway

Thanks, but I´ve found a problem with my Decklink Extreme PCI card. The Premiere preview problem happens only when I´m using any Black Magic presets. Is Decklink Extreme PCI/windows 7/Adobe CS5 a bad combination? I´m not able to get any picture on my monitor from the decklink what so ever (composite/component), but there´s a signal there (black video). Worked fine in XP (with CS3), kind of worked in win7 with my old configuration (4GB RAM, single core AMD-processor), and absolutely no response now.

Preview problem after close PREMIERE

Similar Messages

Maybe you are looking for