Preview problem with NEF files in Lightroom 3.3 from d7000

Lightroom 3.3 (with XP) states in import screen for NEF files from my d7000 "Preview unavailable for this file", and "could not read preview" when I double click on image to bring it to full-field view. Any hints? Thanks.

Oops, sorry (posted incorrectly)

Similar Messages

Problem with NEF files from Nikon D4

Hi everyone. I find a problem with nef files from my Nikon D4. When files are open in ViewNX2 (free viewer software from Nikon) they are perfect, as shooted... but in ACR they are very different... I use LR4 or CS5 with ACR 6.7 and the difference seems to be linked at D-Lighting function. My impression is that ACR dont read this option and picture are very very dark that original shootings. Anyone have this problem?

This question used to be answered in the FAQ before they revised it. So, here we go again. ViewNX is capable of reading all of the in-camera settings such as, camera profile, saturation, sharpness and other settings. It is capable of doing this because it is Nikon Software, and they have the ability to program it to read the settings from their raw images. Lightroom does not read those settings from Nikon cameras or any other brand of camera. Part of the reason is that different camera makers store those settings differently.
When I first started using Lightroom I adjusted one of my images that represented what I normally shoot until it looked the way I wanted it. Then I saved those adjustments as my default settings for the camera. From that point onward, whenever I import images those settings are automatically applied, and it takes care of the vast majority of my images. Of course, I still have to make individual adjustments. But my default settings greatly reduce the amount of how they work that I have to do.
Active D-lighting is is one of those features that Lightroom does not recognize. You would be well advised not to use it, or else create a preset to simulate its effect. It will provide no benefit to your Lightroom work.
This is a fundamental difference with Lightroom, and something that must be understood and implemented if you are going to use the program effectively.
I realize this question was asked in the ACR forum and I referenced Lightroom throughout. But the principle is the same, and the recommended procedure is the same.

Bridge CS 6 preview problem with video files

Hey Community,
I have a problem with the preview in Adobe Bridge Cs 6.
With the pictures and photos everything is fine, but every kind of video format is not displayed as a preview in the preview window, so that I have to open each video manually by doubleclicking on it, so that it is opens in Quicktime.
Is there an opportunity to get that fixed? I just see the Quicktime or VLC-Icon, nothing more.
I tried to purge to cache, to set everything to defaults but nothing worked.
Thank you in advance und best regards.
Alex

Doubleclicking on the files in Bridge causes that quicktime or VLC or itunes (depending on the file format) will open that, but bridge does not handle anything?!
Bridge CC and Bridge CS6 both handle my .mov files from EOS 1Dx and iPhone without any problems. The show in the preview window and can be played with sound in this same window. (MacPro with 10.8.4)
Purging cache is what it is, it dumps the previous cache of the preview and forces Bridge to create a new one, nothing else is set to default.
First try a reset of preferences and hold down option key while restarting Bridge and choose reset prefs. then try again.

Problems with NEF files in Camera Raw 5.3

I have problem with my NEF files in CR. I import them from my harddrive, they open as 8 bit NEF files, but in CR, the only option I have is a depth, no space, resolution or size option where it should be, under the image. I also can't click on the info line under the image to change depth, space etc.
I have the option to change depth from 8 to 16 bit, but when I do that, I can't work on the image in Elements because a dialogubox says its not adequate size (or something along those lines).It is almost as if there is either not enough information on my files, or that CR 5.3 can't read them. I have a Nikon d60 so that should be OK with the software. I also download my images with a cardreader so they should still be RAW files.
If someone could help me I would be grateful, it's doing my head in!!!

…but in CR, the only option I have is a depth, no space, resolution or size option where it should be, under the image. I also can't click on the info line under the image to change depth, space etc. I have the option to change depth from 8 to 16 bit…
In ACR with PSE, under the image you have just two options, changing the zoom and changing the depth (bits per channel):
Why do you expect anything more?
I can't work on the image in Elements because a dialoge box says it’s not adequate size (or something along those lines).
What is the precise error message? PSE 6 or 7, Windows or Mac?

Problem with nef files from my d5100 using cs4

I have cs4 I also have a nikon d40 and I just bought a Nikoin D5100 I cannot see the nef pictures using bridge cs4 how do I fix?

The DNG conversion in Bridge will only convert files that your version of Camera Raw already supports. You will need the latest version of the freestanding DNG converter program which is free and available from Adobe. I'm going to assume that you are Windows user. Here is the link to the Windows version of the program:
http://www.adobe.com/support/downloads/product.jsp?product=106&platform=Windows
You need to download the program and install it and run the program. It is not a plug-in, and it is not part of Photoshop, Bridge, or Lightroom.
Just one word of advice. When you start the DNG converter you will be prompted to choose a FOLDER containing raw files. Be sure to just choose the folder, but don't open it. If you open the folder the DNG converter will tell you that there are no compatible files. If you want to convert just a single file, drag/drop that file onto the icon for the DNG converter. The program will start, and the conversion will take place.
Incidentally, I am 70 years old, and on the verge of retirement myself. I understand your situation completely. If you have any further questions about how to use the DNG converter, or whatever, feel free to ask. There are a bunch of very helpful people here who can get you through just about any problem.

Lightroom 3.6 Camera Raw 6.6 - Issues with NEF files

Hello all,
I'm sure I'm not the only person with this problem, I'm a Nikon user and when I view NEF files in Lightroom 3, before the images loads completely it looks like it did on my camera but when the loading phase is done the picture darkens and it changes, sometimes darkens, sometimes changes tones.. What is happening here and is there any way around this with NEF files? I love Lightroom but if I can't work with NEF the way they look on my camera then I'm going to have to make the switch over to Capture NX 2 and I really don't want to.... In addition I have no problems with JPEG files so I know the issue is isolated to NEF files. I'm also on a Mac with 10.6.7 if that makes any difference.. not sure it does though.
Please help!!

This is not just a characteristic of NEF files. Adobe software and other third party software does not read the in camera settings, instead it applies default settings. The initial image you see is probably the stored image that was processed by the camera, but it is replaced by the image rendered using the defaults from Lightroom. The default camera profile is Adobe Standard, which does not match what you get from the camera. Adobe has generated Camera matching profiles for Nikon and Canon cameras and a few others. Go to Camera Calibration and select the same profile you have selected in the camera - it will have a name like Camera Standard, Camera Neutral, etc. If you have other parameters set to nominal in the camera, this will be a close match to the JPG from the camera. You can set a new default for Lightroom that will use the setting you select and it will use this when any new NEF files are first opened. If you want the NEF file to open identical to the JPG from the camera then Nikon software is the only option. If you were using a Canon, then Canon software would be the only option.

Hi i am trying to open a pdf but " preview " is saying that the file cannot be opened or that there is a problem with the file - what do i do? :-)

hi i am trying to open a pdf but " preview " is saying that the file cannot be opened or that there is a problem with the file - what do i do? :-)

Try opening the file using Adobe Reader.
Clinton

Problems with .ARW files and auto toning

problems with .ARW files and auto toning
let me try to explain this because this has happened in past and never found a way to resolve but i lived with it
now that I have a Sony A7R the problem is more serious
Firstly i take pride it making the picture happen all in camera, i use DRO lvl 5 to get enough light, like when i'm shooting at dusk. DRO its like doing HDR but in a single file, it lightens the darks. in my camera i'm happy with results
but when I upload them to lightroom, they come out near black.
allow me to explain
lets say I import 100 images
i double check my preferences and everything is UNCHECKED when it comes to importing options, there is no auto toning, nothing.
as the images import i see a preview in the thumbnail which looks fine.
i double click on one to enlarge it, hence leave grid view.
for a brief 1 or 2 seconds, i see the full image in all its glory but than lightroom does something funny, it darkens the image
one by one as it inspects each image, if it was a DRO image it makes it too dark.
to make this clear, the image is perfect as it was in the beginning but after a few seconds lightroom for some reason thinks it needs to correct it.
how to prevent lightroom from doing this, i want the image exactly as it is, why must lightroom apply a correction>?
i think it has to do something with interpreting the raw file and lightroom applies its own algorithm.
but here is what i dont get.....before lightroom makes the change i'm able to witness the picture exactly as it was taken and want it unchanged..
now i have to tweak each file or find a profile for it which is added work.
any ideas how to prevent lightroom from ruining my images and just leave them as they were when first detected...
there are 2 phases...one is when it originally imports and they look fine
second is scanning each image and applying some kind of toning which darkens it too much.
thanks for the help

sorry thats the auto reply message from yahoo email.
i've disabled it now
thing is, there is no DRO jpg to download from the camera
its only ARW. so my understanding is when i use DRO setting, the camera makes changes to the ARW than lightroom somehow reads this from the ARW.
but then sadly reverts it to no DRO settings.
because i notice if i take normal picture in raw mode its dark but if i apply dro to it, it comes out brighter, yet when i d/l the image from camera to lightroom, which is an ARW - there are no jpgs. lightroom decides to mess it up
so in reality there is no point in using DRO because when i upload it lightroom removes it.
is there a way to tell lightroom to preserve the jpg preview as it first sees it.
its just lame, picture appears perfect...than lightroom does something, than bam, its ruined,.
what do i need to do to prevent lightroom from ruining the image? if it was good in the first place.

XMP files remain with NEF files in my folder. Camera Raw suddenly reset leaving my edits gone. Will XMP files enable me to resume with those lost edits?

XMP files remain with NEF files in my folder. Camera Raw suddenly reset leaving my edits gone. Will XMP files enable me to resume with those lost edits?

I never tried this, but I'm pretty sure that with DNG files, Lightroom will ignore xmp files, even when you instruct Lightroom to "Read Metadata from File". Lightroom expects all the metadata to be in the DNG file, not in the xmp file.
Pick flags, as far as I know, are never written to xmp file; nor are they written to DNG files.
If you're going to make this transfer procedure work, you need to do it by either (a) embedding the metadata in the DNG file and send those back and forth; or (b) use RAW and xmp and then sending the xmp files back and forth (plus I guess you have to transfer the original RAW once to your editor)

Preview problem with C&EN pdf document

Hi,
I have problem with correct font view of some pdf (from web with password) in application Preview. When I have tried open file in Acrobat Reader or my iPhone it works fine. So, I have reinstalled Lion OSX again, I have checked Font Book in OSX Lion, but exclamation marks show me only duplicated fonts and only one problem with very rare font (Bauhaus 93). When I see pdf in Safari its also OK, but after saving it is "broken" (see supporting files).
Thank you.
Jan Bárta
Czech Republic

Hi Gangisetty,
I guess there is no need to change any settings.
You just need to change format from OTF to PDF using some FM.
You can refer following links for conversion of OTF to PDF.
Re: sending INVOICE as attachment in PDF for external Mail address
FM to send an email with a PDF attachment
http://an-abaper.blogspot.com/2009/07/sending-smartform-as-pdf-through-mail.html
Hope this will help you.
Regards,
Vivek

Problems with importing images into Lightroom cc

Problems with importing images into Lightroom cc
I have installed lightroom cc and having trouble imortera images from my Canon 1DX.
Lightroom starting the capture, but then nothing happens more, if I turn off the camera, I get error message photo 100-200 could not be loaded.
Now I have left lightroom 5 and where the input port works fine.
What happened to the upgrade from Lightroom 5 to lightroom cc?
The camera has the latest software.

I've now tested in various ways.
First, I have images on both memory cards in the camera.
Test1) Selects Not all of the photos in the camera at the input port bearings, it seems to work fine.
Test 2) selects all cards in the camera and then get the following, Lightroom starts inportera short but stops and nothing happens (Fig.1).
I turn the camera off after a while and get the next meddelnade (picture 1)
Which can be translated:
"The following files were not imported because they could not read (351)
Property 1-100
etc. "
Picture 1.
Picture 2

How do I import iPhoto raw (NEF) files into Lightroom 3.6?

how do I import iPhoto raw (NEF) files into Lightroom 3.6?

You will need an application that can convert those pcd files into one that iPhoto supports, mainly jpeg. GraphicConverter is supposed to support many, many formats and might just support the pcd. If so you could use it to convert them to jpegs.
There's an automator workflow that I've put into an application that will take many image files and convert them into jpeg with the RGB color profile. I've never tried it on the Kodak files but you can give it a try. It's called +*Convert to JPG and Embed sRGB profile*+ and can be downloaded from Toad's Cellar. Make a copy of a couple of files and see if it will work. If so then you can batch convert folders of the files at once by dragging them onto the application.
I believe GC can do batch conversions but am not familiar with the application.

Problems with compressing files with right hand click. it does not work.

Problems with compressing files with right hand click.
I am using the compress function in the Mac OS (File > Compress XX) from time to time. Today it does not work anymore. OS 10.5.6
I get a message: The content list cannot be created for compressing.
I tried it with files and folders and keep getting this message. Anybody any idea as to how to fix this

Thanks I love my macbook!!!!
I also got further problems such as copy-paste not working etc.
so I fixed it just this morning by running Applejack 1.5 and am back up running noticing your post.
thanks for helping though!

Problem with Image file

Hi,
Iam facing with one problem.I have one swing interface through which I can upload files(back end servlet programme).Now I can upload all types of file but problem with image file it uploading perfectly that means size of the uploaded file is ok but its format damaged.It can not be open.My backend servlet programme is ok coz i tested it with html form it is working perfectly.Problem with swing interface.Plz guide me where I done a mistake.Below r my codes:-
ImageIcon Upload=new ImageIcon("images/Upload.gif");
     Button=new JButton(Upload);
     Button.setToolTipText("Upload");
Button.addActionListener(new ActionListener()
public void actionPerformed(ActionEvent e)
          int returnVal = fc.showOpenDialog(ActionDemo4.this);
          if (returnVal == JFileChooser.APPROVE_OPTION) {
          File file = fc.getSelectedFile();
String aa=file.getAbsolutePath();
          textArea3.append(aa);
               textArea2.append("Local URL:");
long l=file.length();
          try
          byte buff[]=new byte[(int)file.length()];
          InputStream fileIn=new FileInputStream(aa);
          int i=fileIn.read(buff);
          String conffile=new String(buff);
          String str1=textArea10.getText();
url = new URL ("http://127.0.0.1:7001/servletUpload?x="+str1);
     urlConn = url.openConnection();
     urlConn.setDoInput (true);
     urlConn.setDoOutput (true);
     urlConn.setUseCaches (false);
     urlConn.setRequestProperty("Content-Type","multipart/form-data;boundry=-----------------------------7d11e410e500f2");
     printout = new DataOutputStream (urlConn.getOutputStream ());
String content ="-----------------------------7d11e410e500f2\r\n"+"Content-Disposition: form-data;"+"name=\"upload\"; filename=\""+aa+"\"\r\n"+"Content-Type: application/octet-strem\r\n\r\n\r\n"+conffile+"-----------------------------7d11e410e500f2--\r\n";
printout.writeBytes(content);
printout.flush ();
printout.close ();
Best Regards
Bikash

The errors are here:
          byte buff[]=new byte[(int)file.length()];
          InputStream fileIn=new FileInputStream(aa);
          int i=fileIn.read(buff);
          String conffile=new String(buff); (conffile is a String object containing the image)
and here:
String content ="-----------------------------7d11e410e500f2\r\n"+"Con
ent-Disposition: form-data;"+"name=\"upload\";
filename=\""+aa+"\"\r\n"+"Content-Type:
application/octet-strem\r\n\r\n\r\n"+conffile+"--------
--------------------7d11e410e500f2--\r\n";
printout.writeBytes(content);conffie is sent to the server but
it's non possible to treat binary data as String!
Image files must be sent as byte[] NOT as String ......

What is the exact problem with this file?

Hi all,
There is an old form , which was not in use from many days.
Now when we tried to run the form, i got the error saying "FRM-40734:Internal Error:Pl/SQL error occured.", in the login form.
When i tried to open the fmb file in Oracle Forms Builder 6i, i got the following error:
FRM-10102: Cannot attach PL/SQL library d2kwutil. This library attachment will be lost if the module is saved., but the fmb file got open.
The login button has the following code:
DECLARE
UNAME VARCHAR2(30);
--USER_ID PARAMLIST;
V_USER APUSERMA.USER_NAME%TYPE;
V_PASSWED APUSERMA.USER_PASSWD%TYPE;
BEGIN
select user_CD INTO :GLOBAL.USER_ID from apuserma
where user_CD = :TI_USER_NAME AND user_PASSWD = :IT_USER_PASSWD
AND SYSDATE BETWEEN USER_VALID_FRM AND USER_VALID_TO;
:global.user_id := substr(win_api_environment.read_registry('HKEY_LOCAL_MACHINE\system\currentcontrolset\control\computername\computername','computername'),1,10);
:global.compname := :compname;
compnm(:compname);
--USER_ID := CREATE_PARAMETER_LIST('USER_id_NAME');
call_form('Forms\MAIN_SCREEN',hide,DO_REPLACE);
exception
when no_data_found then
MESSAGE('Incorrect Username or Password. Please Re-Enter');
message(' ');
RAISE FORM_TRIGGER_FAILURE;
END;
EXIT_FORM;
When i tried to compile, i got error saying ,
Error 201 at line 10, column 28
identifier 'WIN_API_ENVIRONMENT.READ_REGISTRY' must be declared.
I am not getting to know What is the exact problem with this file?
Help me with this please.
Thank You.
Oracle forms builder 6i.
Oracle 9i.

Vijetha wrote:
I also want to know what is the use of win_api_environment.read_registry('HKEY_LOCAL_MACHINE\system\currentcontrolset\control\computername\computername','computername') ??
What does it do??
If i comment the following line , will it be a problem??
:global.user_id := substr(win_api_environment.read_registry('HKEY_LOCAL_MACHINE\system\currentcontrolset\control\computername\computername','computername'),1,10);
Because i commented the above line & compiled, so it is not giving any error now.
So please tell me what win_api_environment.read_registry does??
it's read windows registry value. So, no problem if you comment it.
Thanks

Preview problem with NEF files in Lightroom 3.3 from d7000

Similar Messages

Maybe you are looking for