Preview Running on Multiple Devices?

I was wondering if I installed the preview on a Laptop if I would run into issues with verification on a Desktop installation if I choose to do so?

No problem at all here. :) I think you should be good.
Dustin Harper [email protected] http://www.mstechpages.com --- Windows Help and Support Page

Similar Messages

With multiple devices (.g, .n, .ac) will the Time Capsule degrade to the lowest speed, or will each run at the highest rate it is capable of?

With multiple devices (.g, .n, .ac) will the Time Capsule degrade to the lowest speed, or will each run at the highest rate it is capable of?

Highest rate capable.
Things may slow down a bit if you have a number of wireless devices connected simultaneously, since they must all share the same network bandwidth.

I want to run automation test in multiple device say iphone and ipad or two iphone device Is it possible.I have done automation testing using UIAutomation and get it running from iphone device

I want to run automation test in multiple device say iphone and ipad or two iphone device Is it possible.I have done automation testing using UIAutomation and get it running from iphone device

plzzz reply to this question as soon as possible

Installing Developer Preview on multiple devices ?

Is it possible to install the preview for developers on multiple devices with the same developer account ?

Are you using the iPhone and iPod for development or testing? If it's for development I believe you can only have one device, but if you are using them for testing (Ad Hoc) you can put up to 100 on one provisioning profile. If you could manage with just using one of your devices for development, you could easily use both of them for testing.

Multiple Instances of Preview running

I've noticed on my iMac G5 that when I double click a PDF file it launches Preview, but instead of opening using the icon already in my Dock, another Preview icon appears. If I click to open the one already in my Dock, I have two copies of Preview running (verified in Activity Monitor). Both show that they're the same version and both point to the same path in the finder? Anyone else seeing this?
FYI, this doesn't happen on my MBP and both were upgraded using the Archive and Install option. I've also run repair permissions and it comes back error free.
Thanks.

Thanks Steve. Yeah, I ended up doing something similar. At first I trashed the dock icon, dragged it back from the applications folder, but got the same result as before. Then I trashed the dock icon, double clicked a PDF that launched Preview, and then choose "keep in dock" and that stuck. Now I'm no longer getting two copies of Preview. Very odd behavior.

Sync multiple devices owned by other family members to one iTunes account

I am wondering if it is OK since we have one imac computer running iTunes in the house, but I have an iphone and ipad, my son has an iphone, my daughter has and ipod, and my wife has an iphone, if it is OK to be syncing all of our devices under MY login in iTunes. Or should I log out of iTunes and have that particular person log in to iTunes each time we sync? Not sure how that would work though when each device is set up to sync over wifi if I stay logged in on the computer and in iTunes. I just hate to see all the apps in the apps section of the iTunes/Devices/Sync Apps. Not a problem though since it does keep them seperate...most of the time. I mean, it seems as though a few times I have hooked up a device and it corrupted my sync causing all my newly synced devices to change the apps. Only happened a few times. This is kind of vague info, but it hasn't happened only a few times and I don't know how better to explain it. The main question here is as stated in the beginning.
Also, on a seperate note that I'll rant about in a seperate listing, I really hate the fact that I have to login into iTunes with a third party (Gmail) email address. I converted over from a PC and from Google Android to a Mac and iPhone, iPad, iPod, Apple TV....and I have set up everyone with @me.com addresses, but we can't login to iTunes/Apple ID with them.

That doesnt apply very well. Everyone in my family has a separate account. Although for the main home sharing and apple tv it is off my account. I suppose that it is a good thing that we use one pc since everything stored on the hard rive that I sync to iTunes is then available for any user to sync to there device. Ie; home videos, movies ripped from DVD, CDs, etc...plus I have one original,iPod touch with no cloud support. I just synced it to my itunes on our one pc and it transferred to my pc over 640 purchases. Albeit they were all free, but now I have to sift through them all in the iTunes/devices/sync apps screen. Oh well. It actually seems as though the way I'm doing it is the best for my family of six with many multiple devices and im sure more to come in time. Again I can always sign out and let someone else sign into iTunes. A plus this way since still all my media is on my pc and network storage drive.

Multiple devices (iPads & iPods) on one Apple ID - questions

OK, here are my questions. Any help/advice would be appreciated as I'm only a recent Apple convert (after 30 years of refusing to buy Apple!):
a) Can I manage my entire family's devices (4; 2 iPads + 2 iPod Touch's) with a single Apple ID (which also happens to be my email address)?
b) If I do this, do I just need to pay for any app once, and the whole family can use it on their respective devices simultaneously? (I come from the Microsoft/PC world where it's always 1 user at a time per license - such as MSOffice)
c) Can we play multiplayer games via wi-fi, bluetooth, or gamecenter/OpenFeint, etc. using our 'single purchased' app on each device? I'm talking about games like Dungeons 2 HD, Words with Friends, etc. Note that each device may have a different version (HD, universal, iPhone/iPod only, iPad only, etc.).
d) What about more expensive business type apps like Documents to Go or even the IOS version of MS Office 2010? Can these be shared and used by all devices with just one purchase?
e) What happens to apps like Messaging, FaceTime, or iCloud? If the 4 devices are all signed on under 1 Apple ID, can we each communicate separately...and simultaneously? If someone messages my daughter, I don't want to get the message on my iPad, etc. How do we retain our Messaging-specific identity? FaceTime? iCloud space?
f) If I re-register one of the devices (my wife's) that's currently on her own Apple ID over to my Apple ID, what happens to her previously purchased apps (under her current Apple ID)?
g) Are in-app purchases also "shared" by every device linked to a single Apple ID?
h) When I synch each device to iTunes after they're linked to a single Apple ID, will the synch try to install every app that we 'collectively' purchase...instead of just the ones we each want on our device? Will the synch also attempt to download every song and video which may be on the iTunes account?
LOTS of questions, but I'm still a newbie to the wonderful Apple ecosystem. Although I was totally skeptical at first, if in fact multiple users within a household can use an app purchased just once, this is a HUGE plus over the whole PC/Microsoft and even Android ecosystem!! But before I flip the switch and move the other devices over to a single Apple ID (mine), I'd like to hear from some of you who have some definitive answers. Any DISadvantages to running all 4 devices from a single Apple ID? I'm also a bit confused as to the linkage between an Apple ID and an email address, as well as the hierarchy/relationship between an Apple ID and an iTunes account.
Thanks in advance!

Answers that I know :
a, yes - I have an iPad, iPhone, and iPod Touch linked to my account on the same computer/iTunes and haven't had any problems with it
b, you only need to purchase the app once, it can then be copied onto all your devices. Some of my apps are on all three of my devices. If you get newspapers or magazines then I believe that some only allow one download of each magazine/newspaper, so you may not be able to have them on each device.
c, as long as you have your own Game Center accounts then you should be able to - I've never used it
d, yes, you can have them on all your devices, you don't need to multi-purchase them
e, I think that you will each need your own email address for them - in Settings > iMessage you can link an email address with messaging, and similarly for FaceTime (Settings > FaceTime) - that way messages/calls will only go to the correct person. Using FaceTime ; there is also some info on the built-in apps in iPad's manual and iPod's manual
f, all content purchased via an iTunes account is tied to that account, and they cannot be copied or transferred to a different account. So any content purchased on your wife's account will remain tied to her account. You can have more than one iTunes account authorised on a computer's iTunes (Store > Authorise This Computer), so you can have her content as well as yours on the computer that you sync to.
g, don't know, I've not made any in-app purchase
h, with the device connected to and selected on the left-hand side of your computer's iTunes, then on the tabs on the right-hand side you can control what is synced to that device. Those selections should then be remembered each time you re-connect that device, so you can have different selections for each device and you shouldn't have to re-do the selection each time you connect it.

Same apple id for multiple devices

I have been use the same apple id for multiple devices (both are iPhones running iOS 6 - one is a 4, the other a 4S.) I'd like to sync separate content for each device using the same instance of iTunes (iTunes V 10.7 installed on MacBook running OS X 10.6.8.) Can I assign the second device a separate apple id in odrer to differentiate the content? Thanks for your assistance!

No, a second Apple ID will not work. iTunes can already tell them apart.
When you connect the first iPhone to iTunes, check and uncheck the things you want and Sync.
Do the same with the second iPhone.

HT1495 how can i sync aps on multiple devices on one computer

Trying to use multiple devices on same computer but don't want the devices to have all the same aps. how can i seperate that without having to check the aps i want each time a sync?

Assuming the photos are in an iPhoto Library on the Air and you want to import them into your iPhoto Library on your Powermac there is an application that can copy all photos in the Air library that are not in your Powermac library into your Powermac library. However, no keywords or other metadeata willl be brought over with them and they will come over in a new event each time you run it. Take a look at: Sync iPhoto libraries | SyncPhotos (formerly iPhotoSync) | Haystack Software.
There's another application, iPhoto Library Manager, that will let you copy events or albums from the Air library to the Powermac library. However, you will have to select the events/albums you want to copy. It's not automatic. This method will copy keywords and other metadata along with the photos.
OT

Using multiple devices in iTunes, each with different iTunes accounts

My husband and I are trying to go from 2 computers to 1 in the house, but cannot figure out how we can run iTunes on one computer, with multiple iTunes accounts and NOT download each others apps, music etc automatically. My son also has an ipod which I want to have as a separate account.
We still want to be able to share some of the downloads amongst each other - but selectively, and not have them automatically downloaded as they would if there were all on the one library / account.
From what I can see on the online forums I can create a new library for each device to stop the automatic transfer of purchases, but then cannot find how we can select what we do and dont want to share amongst each other, or if this is even possible with multiple libraries.
Is there a way that I can do all of the following:
Have multiple devices on 1 computer in iTunes
Each device has its own iTunes account
Each device retains its own library
Each device can select what purchases we want to share amongst the devices, without it automatically transferring onto each device?
Many thanks!

Have a read here...
https://discussions.apple.com/message/18409815?ac_cid=ha
And See Here...
How to Use Multiple iDevices with One Computer
There is also this > cnettv.cnet.com/use-two-iphones-one-computerl

WRT610n Router lag with multiple devices?

Hi, I had a WRT54G (best router I've used!!) but ugraded to WRT610n after a wrt310n upgrade didn't work well with XBox. The WRT610n v2 has been great but I''ve noticed some lag issues when running multiple devices. While I understand this can be expected I don't expect it to this extent when not using that much and never had the issue before with the 54g. Are there settings that can be changed to improve this?
My setup is Mediacom 20/1.5 with a Motorola SB6120 modem. WRT610n router with a hard wired desktop (usually off and not used), a wireless n notebook wireless (also usually off) as my main use is for XBox 360. 1 wireless n with the new n adapter from microsoft and 1 wireless g with the old white adapter from microsoft. Usually only one is connected at once but sometimes my son will be on the other at the same time. I usually have no isse even still with the 2 (and never did before) but if any other pc is turned on or my Zune HD which connects also if I go on the marketplace seems to slow my setup down. As said before this was never an issue on the old setup but seems to be a problem now. Can I change any settings to stop this problem?

You might be facing the problem because the wireless settings set on your Router to its default settings, So you need to change certain settings on your Router, and that would improve the signal and speed quality on your wireless computers..
Open an Internet Explorer browser page on a computer hard wired to the router...In the address bar type - 192.168.1.1...Leave the Username blank & in Password use admin in lower case...
On the set-up tab change the MTU Size to 1365 and click Save Settings...
For Wireless Settings, please do the following : -
Click on the Wireless tab
- Here select manual configuration...Wireless Network mode should be mixed...
- Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbors network...
- Set the Radio Band to Standard-20MHz and change the Standard channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WPA, For Encryption, select TKIP...For Passphrase input your desired WPA Key. For example , MySecretKey , This will serve as your network key whenever you connect to your wireless network. Do NOT give this key to anyone and remember the key.
NOTE : Passphrase should be more that 8 characters...
Click on Advanced Wireless Settings
Change the Beacon Interval to 75,Change the Fragmentation Threshold to 2304,Change the RTS Threshold to 2304 and Click on Save Settings...
Now see if you can locate your Wireless Network and attempt to connect...

Wireless sync with multiple devices? + related q

Does anyone know what happens if you have multiple devices (with different content - but using the same library) set up on automatic wireless sync? My husband has successfully set up his iPhone to sync, but I'm nervous of doing the same for my iPad in case it causes some kind of conflict if they're both trying to sync at the same time.
I've searched and couldn't find anything about this.
Also does anyone know what happens if you shut down iTunes/the PC while a device is syncing in this way? My husband often plugs his iPhone into his alarm clock to charge while I'm still working on the PC, so it's doing the auto sync when he does that. If I don't notice and shut down the PC before it's finished, will that cause a problem?
Cheers

Thank you a lot Jolly Giant, and I have manual sync.
It seems that there is no way to keep an older version of the same app. Is this correct? I never directly replaced older version with newer version, but I suppose it did so when I did "transfer purchases" from iPad. Then it synced the app on older iPod, and it's not really like I have a choice: if I check its name, it syncs and I have the newer version which does not work. If I uncheck, it removes it from the device altogether.
Does not iTunes realize that I have two devices? Both are registered, etc. etc. can it not keep track of minimal system requirements? In fact it appears it's worse than this, older version are totally not allowed, even if someone has by chance the older file, iTunes will not allow.
And it is not like I have a legacy device, this iPod, even though it can not even run the latest iOS (that is, Apple dropped support after 4.2.1 on Nov 22, 2010), was sold new, and not for a cheap price, not so long ago.... btw branded as "third generation" (not everyone is familiar with hardware specs and technical sheets).
The problem will worsen the day my iPad will eventually abandon 4.2.1 in favor of a newer iOS and sure enough there will be newer versions of apps that no longer support 4.2.1 and which so far, I don't download, but in the future I will want to download for the newer device.
Thank you a lot Jolly Giant for your help and thank you to anyone who will help.
Daniela

Multiple devices with the same GUID

Hi,
According to the Zenworks Command line utilities reference https://www.novell.com/documentation...a/bb15p2z.html
There exists an option to register a device with a new GUID by doing the following...
register (reg) [-g] [-k <key>] [-u <username> -p <password] <ZENworks Server addressort>
Registers the device in a Management Zone.
You can use the following options:
g - Lets you create a new device object with a new GUID and password for the device if you have multiple devices with the same GUID. When you register a device by using this switch, all the associations (policies and bundles) assigned to the original device object are removed. You cannot use this option to create a new GUID for a Primary Server or a Satellite device. The local user must have Local Administrator rights to use this option.
I would like to know if it is possible to have such a command line option for the agent installation. So built into the agent installer, a command line option to force the agent to register with a new GUID.
We are having CONTINUOUS problems with the above scenario. When we move devices from one computer lab to another and re-image the device, Zenworks keps trying to assign the same GUID to the device and this mixes up our Dynamic Workstation groups, which then affect the applicable policies to each device.
I would like to know if there is an option to tell the installer to stop remembering the GUID and simply register the device with a new guid on agent installation.
This way we can build that into the post imaging scripts which install the zenworks agent.

Hi Craig,
OK, I've had a look at the ZCM Reconcile rules and run a few tests to see if it is possible to get the machines not to reconcile (use a new GUID after imaging).
As I have explained before, sometimes this result is desired in our case especially when we move machines around from lab to lab.
So far, no matter what configuration I use, I cannot get Zenworks to generate a new GUID for a device that is getting re-imaged (without doing so only after the fact by unregistering the machine and reregistering the machine via the zac und and zac reg -g).
We use dynamic workstation groups to assign policies and bundles to machines so reconciling the devices is not necessary most of the time. We need an option to tell the machine to register with a new GUID on installation of the agent. Surely such an option can be built into the agent installer?
The options in the ZCM config management "reconcile settings" I tested with are:
Serial Number - Unticked/Unselected
Mac Address - Unticked/Unselected
Machine Name - Unticked/Unselected
Enable Differentiation - Unticked/Unselected
I then also tested:
Serial Number - Unticked/Unselected
Mac Address - Unticked/Unselected
Machine Name - Ticked/Selected
Enable Differentation - Ticked/Selected
and also:
Serial Number - Unticked/Unselected
Mac Address - Unticked/Unselected
Machine Name - Ticked/Selected
Enable Differentation - Unticked/Unselected
With all three different configurations, I re-imaged the same machine, which renames the machine via the first post imaging installation script to match the DNS name. Thereafter the Zenworks agent gets installed, which then renames the machine back to what it was registered into the Zenworks database with on first installation.
We need a method of telling Zenworks NOT to reconcile when we want it to. It should not reconcile every time and thereby rename the machine netBIOS name.
Is there any way to achieve this?
Originally Posted by CRAIGDWILSON
Quite Simple,
Let's say a HDD Dies and you replace it.
All you need to do is bring down an image and the machine will come back as it was with all the same WS and Device associations.
The same thing could apply if bringing in new Hardware.
If a new computer were to replace an old computer but the name stayed the same, everything could be automatic depending on the rules setup.
It is all a matter of how you tell ZCM to reconcile devices.
The Help in the ZCC under these items should explain how it works so you can setup your rules to meet your use cases.

PhotoStream: Multiple Devices and Performance Issues

Had a bad night last night with PhotoStream. I have an iPhone 4S (AT&T), my wife has an iPhone 4 (VZW), we have an iPad 1 (Wi-Fi), Apple TV 2 (Ethernet), and a 2011 Mac Mini (Wi-Fi)... all in the same house that has a Time Capsule and is connected to AT&T DSL service, 3.0Mbps service (average speed test results are 2.65Mbps down, 315kbps up). Oh yeah, there's a micro-cell in there too but anytime there's trouble that gets shut off first so its irrelevant for this discussion.
So yesterday was Halloween and we both took alot of photos away from the house with the iPhones. Got home, started using the internet, noticed the performance was HORRIBLE. Speed test showed over 1,000 ms ping latency (I still can't believe I actually waited for it to finish the ping test) and nothing was getting through for the download / upload test. I have never (believe it or not) with AT&T DSL seen it get this bad. Its been bad before, don't get me wrong, but this was surprising even to me.
How did I come to the conclusion that PhotoStream was my issue you may ask? Well, its sort of a long story, but bear with me... The other day, we started having trouble with the Apple TV 2, which for the most part is pretty solid. My wife was streaming Netflix movies and it was stopping every 30 seconds. It was looking at this issue that had me first raise suspicions about PhotoStream. Just days before this problem started, I had enabled PhotoStream on the Apple TV 2. SO I did the first most logical thing anyone could do, I took a step back and disabled it. Problem solved. Thought nothing of it, yeah I was a little discouraged that I couldn't use it on the Apple TV 2, but not a big deal, my favorite part of PhotoStream is using it to get the photos into iPhoto without having to plug the iPhones in so I said to myself "I'll just keep putting the photos into Events and Albums until they work out the kinks on the AppleTV 2" thinking perhaps the Apple TV 2 needs to not update PhotoStream while videos are being played. They can fix that at some point, right? Sure they can.
Now, back to this other issue. My bandwidth last night was completely crapped out, and I was determined to prestige on Black Ops one last time so this had to change STAT! I mean, come on! I was at Level 47 and I was ready to GO! My internet connection just wasn't having it. I powered off the router, rebooted the modem, and powered on the rotuer again. Everything came up beautifully. I jumped into some Nuketown 24/7, 4 green bars next to my name and I was happy. After we lost Bravo, which on Nuketown takes about a minute and a half if both teams are fighting over it, I'm lagging like crazy and I have that little red bar that no one likes to see next to my name. Sure enough, speedtest results are all whacked out again.
So I'm sitting there thinking to myself, what could this be? My wife was watching cable TV, my son was asleep... essentially the Xbox 360 was the only thing trying to use the internet... I thought... until I remembered our iPhones and the photos we had just taken and all the devices that would be simultaneously trying to update PhotoStream. Let's list them again, shall we?
iPhone 4S - Upload to Stream and Download from Stream
iPhone 4 - Upload to Stream and Download from Stream
iPad 1 - Download from Stream
Mac Mini - Download from Stream
So how can I prove this crazy theory of mine that the great and wonderful PhotoStream was choking my internet connection? Simple.
iPhone 4S - PhotoStream OFF
iPhone 4 - PhotoStream OFF
iPad 1 - PhotoStream OFF
Mac Mini - PhotoStream OFF
Speed test results immediately after doing this?
2.73Mbps down / .31Mbps up with 26ms ping time (used the Speedtest.NET app on the 4S).
Sadly, this means that for now, I cannot use PhotoStream, however I did manage to Prestige on Black Ops which made me happy, and the iPhone 4S can still be plugged into the Mac Mini to download my wonderful looking photos.
That's right, I didn't throw away the charger cables just yet and if you want to start talking about iTunes Wireless Synching with multiple devices in the same house, I can gladly take up some more of your time. Thats right, its OFF as well!

I just wanted to report that this is still an open and particularly nefarious bug. I've got a fairly idealized Apple household with 2 iPhone 4's, a 'new' iPad, a 13" Macbook Pro, Airport Express and our most recent addition this weekend... an Apple TV.
While I had no particular interest in enabling Photo Stream, I turned it on while messing with the screen saver settings and didn't think anything about it. As I began to play with my new toy I was immediately disappointed with all the long spinners and timeouts in Netflix. Later that day I noticed my computer and iPad were having similar connection issues. My first thought was 'oh, Comcast must be acting up, that's why my new Apple TV isn't working so well'.
Fast forward 3 days to today and our network issues were still occuring and I decided I needed to figure out what was going on. After mucking around in network settings for a couple hours I half-jokingly decided to disconnect the AppleTV on the whim that the issues started at the same time I hooked it up. Sure enough my network issues disappeared. I even went so far as to run continuous pings to various IP's outside my home network and watch the timeouts come & go as i plugged/unplugged my ATV. Now knowing the ATV was the problem I set out to figure out what in particular was causing it. As soon as I signed out of Photo Stream everything was working perfect again. Netflix on the ATV is quick & responsive, no more spinners or timeouts. My other devices aren't plagued with random disconnects, dns failures or slow downloads.
Long story short, something is bugged in AppleTV's Photo Stream support. Mine didn't appear to be downloading any new photos, it had stopped with 255 photos downloaded. Not sure if that was all I had in iCloud or maybe AppleTV can only pull down 255 max? Maybe 255 is the magic number where it hits the bug that causes this behavior? Either way, it appeared to be only affecting the outgoing internet connection, when I had a continous ping going to another machine on my internal LAN it didn't appear to get affected.
Hope this helps someone at Apple track down the bug. While someone technical can probably troubleshoot these issues I could see someone like my mom never putting the 2 + 2 together that her internet problems started around the time she enabled Photo Stream on her AppleTV and instead blaming it on 'the internet acting up again' and of course calling me months later to look into it for her.

Does lion server support a single email address across multiple devices??

I am looking to move from an outdated Microsoft Exchange Server 2003 to OS X Lion Server but I am unsure as to how Lion will handle email. I do not want to spend money on a new windows server if I can get a Mac Mini Server to do the job. I am a very small business with a number of email accounts for a couple employees and need access to email and calendar from both the office iMac's and my Macbook Pro when on the road. My IT guy says I need Exchange but he's been off base on a few other items recently and I wanted to check with other sources.
I have 2 new iMac's, a MacBook Pro, an iPad1 and and iPhone4 on the mac side of things and 2 windows computers running XP. I would get rid of the windows computers completely if not for my CAD program which runs best not in a virtual machine mode.
How well will email and calendar entries sync across devices?

I have a very similar setup at my office. Lion Server will push email, calandar, contacts to all of your apple product with out a hitch.
As far the Windows XP machines, you can access email over IMAP with Thunderbird, and calandars via sunbird or the built in web app.
I would ditch the exchange server move to Mac OS X Server, and never look back.
God Luck!
PS. All of your devices will be in sync all the time.
Shore answer:
Does lion server support a single email address across multiple devices??
Yes.

Preview Running on Multiple Devices?

Similar Messages

Maybe you are looking for