Preview Tabe in layers palette in Apple Motion

I am new to Apple Motion. I bought a book to learn how to use it. In my layers Palette there is supposed be thumbnails of what is on my canvas right below something that says "Preview." I do not have "Preview" on my layers palette nor do I have thumbnails on it. How can I see them? Is there a setting I need to know about?
Thanks in advance for your help

Give Nipsey the (press it above his post)
New Discussions ResponsesThe new system for discussions asks that after you mark your question as Answered, you take the time to mark any posts that have aided you with the tag and the post that provided your answer with the tag. This not only gives points to the posters, but points anyone searching for answers to similar problems to the proper posts.
If we use the forums properly they will work well...
Patrick

Similar Messages

  • Layers palette disappears when I click on my project

    I looked but can't find a help reference that addresses this problem.
    The layers palette disappears everytime I click on my project. I want it to stay visible, without having to click F7, or go to Windows...Layers every time! How do I tell it to stay visible? It used to, and now it doesn't.
    Thank you!
    Rebecca

    I just figured it out (several hours later).
    I had to drag the tab off the palette and onto the desktop and there it is!!
    Sorry for the bother. Thanks for the ideas, though.
    Rebecca

  • Mask layer not visible in layers palete

    I have a strange problem, when I apply any kind of mask to a layer in motion 3, the mask icon shows up on the layer to which it was applied in the layers palette, but the mask layer does not show up underneath the layer to which it was applied, thus i can't select the mask to adjust the controls of the mask, I can only toggle it on and off,
    I would assume this is a simple user error, but for the life of me I can't find a "show mask layer" setting anywhere,
    any insight on this problem would be hugely appreciated.

    the disclosure triangle for the entire group is twiddled, showing my layers and any added effects, but for some reason the only thing that shows the presence of a mask is the small square icon on the video layer, but as there is not layer beneath the video layer to click on to adjust mask controls... i have been watching m3 tutorials and the mask always creates a layer in the palette when activated, but for some reason it's not with mine...
    ???

  • Open my photos in CS6 and they don't show up (but show in layers palette)

    When I open a photo in Photoshop CS6 I can see the photo in the layers palette but it doesn't show up on my screen to work on. The only way I can get it to show up is if I act like I'm going to close Photoshop. Then when it asks if I want to close I say "No". Then my photo shows up so I can work on it. Please help!

    Please read post #5 again:
    You can disable that in Photoshop's preferences, under the Performance tab.
    But you need to update your video card driver, preferably from the GPU maker's website (not Microsoft, and not the system builder).

  • Layers palette disappears in photoshop cs5

    My layers palette disappears in photoshop cs5 (64 bit and 32) any time I click on another tab such as histogram or info. It also disappears after PS opens and CS live starts. The layers tab is still there but the layers themselves go away. I can get them back by clicking on the tab. A minor problem but is starting to get real aggravating as it disrupts workflow. I tried Ctrl+alt to reset. Doesn't help. Uninstalled Creative Suite Production Premium CS5 with the remove preference box checked at least 8 times as well as using the Adobe Creative Suite cleaner tool. I have gone as far as removing EVERYTHING Adobe on my machine and deleting every adobe reference in the registry, every file with the Adobe name on it. If it had Adobe on it it was deleted.Cleaned and defraged the drives and registry. My Premiere Pro also has problems with the start up screen. I just cannot get a clean install of CS5 no matter what I have done, short of wiping my hard drive. Any ideas?
    Adobe Creative Suite Design Premium CS4 (Only DW, FW and ID installed)
    Adobe Creative Suite Production Premium CS5
    Windows Vista sp2 (64bit)
    8 gigs ram
    Thanks.

    What do you have set for Animation Options?
    -Noel

  • Lost Tabs in Channels palette

    Hey Folks...
    Newbie here learning my way in Photoshop. Any help is appreciated.
    Using Photoshop CS3... When I pull up the Channels palette I seem to be missing the "paths" and the "layers" tabs...The only tab i see is the Channels tab.
    I remember seeing them and then i think i deleted them by accident....
    Any ideas?
    Thank u!!

    Thank u!! Figured it out. Opened Layers palette and dragged channels tab into it.

  • Layers palette closing on exit

    Hi,
    I am running Photoshop CS5 on Windows 7. For some reason whenever I exit and then re-open the program, my layers palette collapses and I need to click on the layers palette tab in order to open it again. I don't know why it's happening. When I exit the program the layers palette is open but when I subsequently open the program it is closed and needs an action on my part to re-open.
    I have checked all of my preferences, etc. and they all appear to be fine. It's an annoying quirk that I would like to figure out. Is it a known bug or is there a fix for it? I have uploaded the most recent CS5 update just to see if that helped but it didn't. Any suggestions?
    John

    Yes, I have two monitors.  I don't see how people can be very productive with Photoshop without a lot of screen real estate.
    I may be using the wrong or incomplete terminology.  My panels are all floating (in that they are not part of the Photoshop main window, my having dragged them out), but they are "stuck" to one another.  You'll notice I have it all saved as a named Workspace ("NOELS") as well.
    I took John's original post to mean that he always wants to see the Layers panel, which implies he has the screen space to keep it open.
    You could emulate this on one screen, by the way, by making the Photoshop main window narrower and dragging the panels you always want open to the side of it.
    -Noel

  • I need layers palette over not under images.

    Hi,
    Photoshop CS4
    How can I make the layers palette show on top of images I am working on, it flies out sideways but is under them !!  I see no setting for this in preferences>interface.
    I have to make them smaller so as to see it, which in itself is the most stupid thing Adobe ever did to the interface, why force the working area smaller, I dont even want it on top covering the bit I am editing !  My screen space is only 60% width for images when that layers panel is opened. For a program that is all about working on images, we need images big, and panels non intrusive into our screen area.
    So my second question is how can I have it expand downwards like CS2, I far prefer CS2, I can even see the image that is active as the top bar is blue and others are grey. The number of times now I have found myself seeing nothing happening then discovered the image being affected is different to what I thought, having to look at shades of grey at the top and establish which is the darker denoting the window that is active is nuts. Goes against years of blue active windows bars which worked, instant realisation. I hate CS4, even the way it harmonises with msoft windows seems glitchy, redraw seems to happen in large square chunks, CS2 was instant throughout. minimise and close icons top right are ghosted and its the ghosts that actually function. A thin grey line runs throughout the top wording, on office and home PC's both XP, different graphics cards, both chosen from the Adobe compatible list !
    I have CS5 still boxed as I fear Adobe will no doubt make things even worse ! Flash CS5 is worse than CS4, slow and glitchy and users on the internet say the entire CS5 suite is flawed.
    Envirographics

    ok, now that I have found out how to post images,
    Heres the layout that I like in my CS4, palettes top right and when I click e.g. layers it opens downwards, leaving my screen for use with images.
    and here is the palette when layers tab clicked on, I dont like though the fact that in CS4 they are taking up 1.5inches more of my screen than in CS2, they wont go any narrower than this. I am running 1024x768, the most the monitor can do, but that's a valid resolution, used it for any years now :-
    If I click on the dark grey top to that palette set or on the chevron in the next image
    I get this, which is dumb. The icon bar out across screen.
    If I was to position this to abutt against screen edge at right it would open palettes OFF screen
    If I open some images with my palettes showing having clicked on the dark grey top to the icon bar in the last but one image, I now see they are over the palettes.
    I also find the menu atop screen is squiffy, a grey line runs throughout, and the minimise and close buttons are not the dark ones but something in grey slightly lower, see image:-
    and having relaunched photoshop CS4 and even made the palette go as the icon bar and back, this time the images are underneath, the whole thing drives me nuts.
    Envirographics

  • Report Preview Tab and data loading

    I have 2 questions:
    When I first started developing a report, when I opened the file I had both the design and preview tabs displayed. It seems after I downloaded and viewed 1 of the sample reports, the preview tab disappeared (tho, it's not obvious the 2 are related). I checked the box under Options/Layout/Display Preview Panel, but it did not seem to help. Is there something else I missed?
    The other question, and this may have an effect on my 1st question, is that when I open my report file, the database records are not automatically loaded (thus, nothing to preview at that point). Is there a way to set an automatic log on to the database so that the load time happens at the beginning and not when I actually want to preview results?
    Thanks in advance....Steph

    Don,
    Thanks for the response. I tried what you suggested and it does not seem to work all the time. There may be something else that I need to consider.
    I was wondering...when I do the "Save Data with Report", does it save ONLY the data? Or does it save some intelligent connection back to the database?  Also, is this function the same as the one listed under Options/Reporting? I selected the one on the File menu (as you suggest), but it doesn't seem to change the selection on the Options/Reporting window.
    Apologies for my attempt at a "2-fer-1". I only did that because I believed the 2 might be related...maybe not. I'll repost as a separate issue/concern.
      Cheers...Steph

  • Any way to import multi-layered Illustator file into Motion?

    I have an Illustrator map of Europe and i would like to bring it into Motion.
    I know that Motion can import Illustrator files as pdf but is there any way to import a multi-layered illustrator file into Motion. I just saw this web site regarding a Motion plug-in that claims to do just this:
    http://www.macupdate.com/info.php/id/16298/layerlink

    Without a dedicated plug or FxPlug, Motion has no inherent ability to parse Illustrator layers.
    We just bust the layers out and save them as individual files. Or, of course, we use After Effects.
    bogiesan

  • Mac book pro, Vram 256, how to improve performance of Apple Motion

    i am in video editing since one year and I don't  have any experience about video cards etc
    I was answered in un another thread that to drive a professional monitor I shoud buy a device as MATROX MXO2 FAMILY,
    my question is can that device let me bypass limit of my internal Vcard and raise performance when using apple motion and after effects?

    Sorry, but capture cards lik the Matrox MXO2 don't boost performance with MOTION.  Only a better graphics card will.  And with a laptop, you can't swap out what you have.  You have what you have.  For better performance, you would need to get a MacPro and a higher end graphics card. 
    Capture cards don't factor in here.

  • I changed my Apple ID (other email address and password) and now I can not login to my account in the iPhone iCloud. When I open the tab iCloud displayed my old Apple ID (it was in the iCloud) and asks for a password, but neither the old nor the new passw

    I changed my Apple ID (other email address and password) and now I can not login to my account in the iPhone iCloud. When I open the tab iCloud displayed my old Apple ID (it was in the iCloud) and asks for a password, but neither the old nor the new password does not match. What to do?

    If you want to change your iCloud ID or password on your phone go to Settings>iCloud and tap Delete Account, then sign back in with your updated information.  Note: this only deletes the account and any synced data from your phone, not from iCloud.  Provided you are signing back into the same account and not changing accounts it will be synced back to your device when you sign back in.

  • How do I keep layers from auto-expanding in the Layers Palette?

    Hello all. I'm working on a rather complex piece of artwork in Illustrator CC with the latest Mac OS, with several objects on each layer.
    Whenever I click an object, its layer in the Layers palette auto-expands, pushing all of the main layers off of the edge of the palette. I then have to click the little arrow to collapse the layer so I can see all of the other layers and (quickly?) get to the one I need.
    I am using a Magic Trackpad (don't ask) so this task is particularly arduous, as the cursor is often somewhat difficult to maneuver when attempting to target small UI elements. My display height is only 1050 px, so naturally I would rather not make the layer thumbnails any smaller (25 px.)
    Is it possible to disable or defeat the auto-expanding behavior? Any help would be kindly appreciated. Thanks!
    Edit placed in bold

    Checking the Layers>Top Level Only boxes in the Layers Panel Options palette did not work to stop the triangles/arrows in the Layers palette from turning themselves down when an object is selected that is part of a sublayer.
    (This is on Mavericks 9.1 using CS6.)
    These two checkboxes are in the Thumbnails section of Layers Panel Options and does not affect the arrow animation on my Mac. I haven't been able to find any combination that stops this behavior, including changing the "Show Layers Only" checkbox.
    FEATURE REQUEST:  Adobe, an OPTION for this please? We don't all work by targeting sublayers in the layers palette, especially those of us who spend most of our time pawing through someone else's work/setup.

  • Preview Tab - Pop Up Error

    Last week I installed some adobe updates, I believe one of those was for adobe reader. Now everytime in LCD when I click on the preview tab I get the following message: "The Adobe Acrobat/Reader that is running can not be used to view PDF files in a web browser. Please exit Adobe Acrobat/Reader and try again. Also since the updates LCD seems to fail and close unexpectedly quit often.

    Since upgrading to Mac OS X Mountain Lion with the latest security updates, this annoying problem has disappeared.

  • Four FxPack plug-ins for Apple Motion

    Hi,
    just to let you know that I posted four plug-ins I made (Fake 3D, Numbers, Drop Shadow and Grow Bounds) with FxFactory Pro for Apple Motion.
    http://avseikkailuja.blogspot.com/2008/11/tapios-fxpack-10.html
    These plug-ins are totally free but registered version of FxFactory Pro 2.0.5 (or trial time) is required. Hope you find these useful.

    There's a new very advanced Motion 5 / FCPX lens flare plugin called mFlare. It is jus as great as Optical Flares fo AE and it's much cheaper. It includes over 110 presets, dynamic animation engine, 3D lights tracking, 13 lens flare objects and all important stuff. Check it out at http://www.motionvfx.com/mplugs-1.html

Maybe you are looking for

  • Local testing server root and web url

    I would like to know if I have correctly set up my local testing server for the root folders. Very new to this. Local site folder is at C:\xampp\htdocs\NIF\. Test server folder is C:\xampp\htdocs\NIF\ Web URL is http://localhost/NIF/ Links are relati

  • Adobe Digital Editions 2.0 will not run

    It used to run.  I used it to download e-books, but now I am told that it is an incompatable program.  What do I need to do.  I have tried to restart it.  I uninstalled it and reinstalled it, and I installed an older version and tried up upgrade it. 

  • Creating database after installing oracle 10.2 on solaris 10

    Hi, I installed oracle 10.2 on solaris. after installation is completed i started dbca to create a database. i mentioned all the details, after i click finish button, one window will open , in that all database details will be mentioned, when i click

  • Why is "Use a certificate" the only option I can choose in Adobe Reader XI?

    I can only choose "Use a certificate" in Adobe Reader XI. How can I change this so I choose the other options to sign. I need to sign a document in Adobe Reader. I know in Adobe Reader X that I can modify the settings so I can sign. But in XI the oth

  • Quicktime Audio Disappears after Publishing

    Hi - I'm using iWeb 09; I have long been using iWeb to publish my website - part of that has been uploading mp3 files for people to listen to. My problem is suddenly my files, which play perfectly in iWeb, don't even show up on the page after I publi