Preview template in browser Doesn't  work

Hi I’m trying to preview a template I have made with DW
in IE but it won’t work. When I do this a dialog window pops
up and asks me if I want to open or save it, if I shoes open, it
opens in frontpage. It says that it is a Frontpage template, I have
tried to open it with ie and DW but it only goes back to being
frontpage document even though I have set it to always open with
ie. What am I doing wrong?

Try enabling Preview with Temp files, in your preferences.
What's wrong is that without this enabled, the browser is
passed the *.dwt
file and it has no idea what to do with it. With temp files
enabled, DW
builds a temporary *.htm file first, and that's what the
browser is asked to
render.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Stonevalley" <[email protected]> wrote in
message
news:er3uq6$632$[email protected]..
> Hi I?m trying to preview a template I have made with DW
in IE but it won?t
> work. When I do this a dialog window pops up and asks me
if I want to open
> or
> save it, if I shoes open, it opens in frontpage. It says
that it is a
> Frontpage
> template, I have tried to open it with ie and DW but it
only goes back to
> being
> frontpage document even though I have set it to always
open with ie. What
> am I
> doing wrong?
>

Similar Messages

  • Inspirational browser doesn't work

    Hi! I am Rudy, I need help. My inspirational browser doesn't work. Thanks for help.

    Why don't you give us some details?
    OS version?
    PSE version?
    What steps are you doing?  What exactly happens ("doesn't work" doesn't help us)?  Any error messages?
    Ken

  • After instaling mavericks  terminal, preview, app store, etc,  doesn't work anymore

    after instaling mavericks the terminal, preview, app store, etc,  doesn't work anymore...
    What have to do to solve this problem?

    You ran a defective third-party "utility" such as "CleanMyMac" that purports to "clean up" "junk" files. What it really does is to corrupt the operating system.
    The first thing you need to do is remove that software, if you know what it is, according to the developer's instructions. Never install it, or anything like it, again. Then see below.
    If you don't already have a current backup, back up all data, then reinstall the OS. You don't need to erase the startup volume, and you won't need the backup unless something goes wrong. If the system was upgraded from an older version of OS X, you may need the Apple ID and password you used.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    If you installed the Java runtime distributed by Apple and still need it, you'll have to reinstall it. The same goes for Xcode.

  • Can't Preview Template in Browser

    Everytime I try to preview my template in browser (F12), a
    dialog pops up asking if I want to open or save this file, which I
    have already done...then nothing happens. Is there something I am
    missing in order to preview my template in browser? Thanx.

    enable previewing with temp files.
    that will create a temp .html file the browser will
    understand, instead of
    the .dwt file
    dw preferences-->preview in browser. there is a checkbox.
    this may be a "by site" choice in dw8, and be in the site def
    information,
    i'm not sure.
    > Everytime I try to preview my template in browser (F12),
    a dialog pops up
    > asking if I want to open or save this file, which I have
    already done...then
    > nothing happens. Is there something I am missing in
    order to preview my
    > template in browser? Thanx.
    >

  • My Browser doesn't work

    I used to be able to select Browser and it would take me directly to the Internet. Now when I select Browser, It takes me to a "Services - Email Accounts" page and I am unable to access the Internet at all. What happened?
    Solved!
    Go to Solution.

    First try reregistering the device by going into Options | Advanced Options | Host Routing Table. Find the bold entry, hit your menu key and select Register Now. See if you get a registration message in your Messages list. Afterwards try resetting the device by removing the battery for a minute.
    If that doesn't work go into your Browser, hit the menu key and select Options. Go into General Properties. Try changing the Default Browser from BlackBerry Browser to Internet Browser (or vice versa). Then close and reopen the browser
    If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
    Remember to resolve your thread by clicking Accepted Solution.

  • IWeb "open new page in browser" doesn't work?

    On websites I have created in iWeb, the hyperlinks to a web page will not open in a new window even though I have checked that setting in the Inspector. Previously when creating websites with html I would simply add the "blank target" code but in iWeb there is no way to edit html directly. I have tried this with Safari and with Firefox, it doesn't work!
    Message was edited by: Ironic Bliss

    Thanks for those helpful suggestions, though I have batted around different ways of trying to get iWeb to register the "open in new window" when checked, to no avail so far, and it doesn't work with any link, whether in text or combined with an image. Taking all these points:
    I have now managed to open the html using TextWrangler but I must admit it is a little beyond me to even find the string of code in question as iWeb uses so many files. It would be better if I could just get iWeb to do the work for me as it's meant to.
    Strangely, when I open the website in iWeb the first time, all the pages to the left are marked in red before I've done anything! So I cannot use that as a simple check to see if a change has been made. Also I have already tried making other changes after checking the "open in new window" box before saving.
    I always publish to a folder on my HD, as I am uploading to a server that is not me.com or mac.com. (Could that be the trouble? iWeb seems to generally be very unfriendly to publishing on other servers than Apple and I have had to jump through a lot of hoops with various things.)
    Could it be the weird folder hierarchy created by iWeb, where there is an index.html page outside of the main folder where all the stuff is kept? So far, I have just uploaded it to the server "as is", so the contents of the main folder (which has another index.html rather strangely placed outside it) are not at the root level on the server. The folder containing them is at the root level and so is the "external" index.html. Would it work if I uploaded only the contents of the folder to the root directory on the server, and not in the folder that iWeb creates or with its "dummy" index.html outside it?
    (I think in the past this has caused trouble with Google search sitemaps, and is the reason why in the end I uploaded the whole thing and not just the contents of the main folder.)
    So to be clear (not that easy here), the files on the server are:
    Directory > index.html plus the folder containing all the website files. So the actual website files are at a second level in a folder, not at the root level.
    The easiest example where the blank target doesn't work is on the home page of one of my websites. Scroll down and there is an image of a book which has a link to a bookstore. This should open a new page in the browser, but never does. (Annoyingly, in FireFox it even kills the back button, Safari works slightly better in that respect.)
    http://www.ordoastri.org/OA/Ordo_Astri.html

  • Preview for an application doesn't work in Portal

    Dear All,
    Application 'hrrcf_a_candidate_profile_int' doesn't work in Portal IView in ECC 6.
    Any reasons??
    Thanks.

    Hi,
    What kind iView you created in Portal?
    Have you the log of the error?
    Regards
    Eduardo

  • Previewing Templates in Browser

    I'm new to Dreamweaver, working through a book by Heathcote.
    I can preview normal pages in the IE4 browser no problem but not
    templates although the book tells me this is possible. I'm using
    Dreamweaver MX2004.

    > Also, if you are using templates and you don't already
    know, you will have
    > to
    > do some modifying of the site before uploading it. This
    process eliminates
    > the
    > code DW added to make the feature work but code that is
    not necessary for
    > viewing. The reference I have with specific instructions
    is the book The
    > Missing Manual. I have seen others on this forum
    recommend it. You may
    > want to
    > consider it.
    What? You don't need to do any such thing! 8) If you can find
    the
    reference in Missing Manual, I'd love to see it....
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "pbsue" <[email protected]> wrote in message
    news:ekvn7i$97h$[email protected]..
    > Poacher2,
    >
    > Try this: Go to Edit/Preferences and check the Options:
    Preview using
    > temporary files check box.
    >
    > I did this when I began working with includes and then
    my template pages
    > would
    > preview as well...they are temporary files. I was just
    previewing a child
    > page
    > prior to that.
    >
    > Also, if you are using templates and you don't already
    know, you will have
    > to
    > do some modifying of the site before uploading it. This
    process eliminates
    > the
    > code DW added to make the feature work but code that is
    not necessary for
    > viewing. The reference I have with specific instructions
    is the book The
    > Missing Manual. I have seen others on this forum
    recommend it. You may
    > want to
    > consider it.
    >
    > Hope this works for you, Sue
    >

  • Dragging a single image from mac Preview to InDesign CS6 doesn't work but 2 or more images does?

    I usually take anywhere form 2500 to 5000 photos in any single day's session. Because of this, I need an easy way to sort through them and grab just the one's I need to import to my InDesign "book". I have been using CS3 for years now, and what I always did was open up Preview on my Mac to browse all my days photos. Then when I found a good one, I would simply drag that single image over to my opened InDesign screen and just drop it into a page. I would then go back to Preview and continue this procedure until I had looked through all the days images. I could even drag multiple images over and once I was over InDesign I can just click each image and pop them into various pages with ease. Then I upgraded to CS6 and I've hit a kink in the works. When I drag over a single image to InDesign, before I drop it into the page my mouse pointer looks like 3 tiny paste images (the little rectangle with the folded down upper left corner). If I release my mouse to drop the image into InDesign, it just flys back to Preview and doesn't drop into InDesign. Now if I get 2 or more images from Preview, this process works just like it always did. But 1 single image... never. I've tried holding down command, shift, control, option, and combos of those buttons to see if anything changes and it never does. I always get the mouse icon with 3 little paste icons. In CS3 if I dragged a single image it would only show 1 paste icon and 3 icons if I dragged 2 or more, but not in CS6. Is there a setting I'm missing or a preference? I've tried looking through everything that I can find to no avail. There has to be a way??? Thanks!

    Use Bridge instead
    good luck

  • Enable Commenting Toolbar in Browser (doesn't work for IE / FF)

    I've seen a lot of chatter about this scenario but nothing seems to be working for me. What I want to do is this:
    Create a .pdf.
    Attach to the enterprise wiki software Confluence.
    Check-out in Confluence.
    Have the Commenting / Annotation toolbar available in IE / Firefox.
    Make changes.
    Save the .pdf.
    Check back into Confluence.
    This isn't working for me. What I've been doing is this.
    Create a .pdf in FrameMaker 10.
    Open in Acrobat 9 Pro.
    Navigate to Advanced > Document Processing > Document Javascripts
    Create a Script (I called mine 'Commenting').
    Click Add....
    Used this JavaScript:
    function Commenting()
    {Collab.showAnnotToolsWhenNoCollab = true;
    Click OK.
    Click Close.
    Save.
    Click Comments > Enable for Commenting and Analysis in Acrobat Reader.
    Save.
    Attach the .pdf to Confluence.
    When I Checkout the file from Confluence in IE 8, the document appears but toolbar doesn't appear. When I Checkout the file in Firefox, the document doesn't appear at all.
    I'd really appreciate a clear response on how to get this work. While I'd prefer to use the Acrobat Commenting from within Acrobat Pro for peer document review, I've been asked to research using Confluence as the primary nexus for peer review. I'm not having any luck thus far.
    Thanks in advance,
    John Cook
    Technical Writer
    Merge Healthcare

    Clicking the link to the .PDF launches the file in a browser (same gimped toolbar for both IE 8 and Firefox). When I right-click the .PDF toolbar in-browser, I have access to the following toolbars:
    File
    Find
    Page Display
    Page Navigation
    Select and Zoom
    Tasks
    I don't see anything for Commenting / Annotation.

  • The preview option in FCK doesn't work when using trought an external app!

    Hello everyone!
    I have an issue with the FCK-editor when using in an external application.
    We are executing the “WCM_EDIT_DATA_FILE” service to launch the FCK contributor application in a portal (Webcenter) so we can edit datafiles. The preview option (preview butto) does not apply a region template and the content is shown in the same order as defined in the region definition. Viewing the same datafile trough Site Studio I can see that the preview option applies a region template.
    I've compared the links but I am not getting anywhere.....
    The links for the preview are:
    Via the portal:
    http://MyServer/vcc/idcplg?IdcService=SS_QD_GET_RENDITION&coreContentOnly=1&dDocName=DF_NEWS_BERLIN_8&dID=765&wcm.contributor.mode=false&IgnoreContributorOnly=true&previewId=1276003853183&WCMPopupId=POPUP09875462424653607178
    Via Site Studio:
    http://Myserver/VCCPOC/index.htm?wcm.contributor.mode=false&IgnoreContributorOnly=true&previewId=1275983448108&WCMPopupId=POPUP07808631203986127290
    I can see that the portal link has the same parameters as the Site Studio link and some more. I even tried adding a region template in the url by adding my template as a parameter like this "&templateDocName=RT_BOUND_DETAIL_VIEW" just to force it but without any luck. The same goes for the "view differences"-button in the FCK editor.
    Has anyone had this problem?
    Thanks

    Hi Stijn,
    Here is the link to the SS-services:
    http://download.oracle.com/docs/cd/E14571_01/doc.1111/e10615/c11_ss_services.htm#insertedID0
    And here is the link to the CS-services:
    http://download.oracle.com/docs/cd/E10316_01/cs/cs_doc_10/documentation/developer/services_reference_10gr3en.pdf
    The name of the service that creates new data file is CHECKIN_NEW_FORM.
    Saving the file from the FCKEditor makes the browser window "greyed out" so for the time being we are hitting the "go back"-button in the browser to return to the portal... as we open the editor in the same window as the portal. However, there must be another solution as this is fare away from user friendly!
    Let me try to answer some of your questions:
    - Are you also using the Site Studio publishing functionality (we will not)
    No, we are not either.
    - where will your site design be done (we'll try to do as much as we can in WebCenter to keep it all in one place; we might even just output XML with our templates from SS, and transform it in WebCenter using different "templates")
    We are also planning to have it all in WebCenter. We are using SS for creating region templates and subtempalates used in the portal (Webcenter/ADF) for showing the same data files in different ways. That means that we also have elements, region definitions, placeholders and so on in the SS.
    - what are you doing with inline images in the FCKEditor (we want contributors to be able to upload there images easily from the Editor, without the need to browse to UCM)
    Well, for the time being the contributor must browse the some images from the CS because the images must have a certain height and width... so that is our way of controlling that the user is choosing from the approved images. When it comes to images in the text the contributors can add as many images as they want that are not from the CS. They can just copy/paste them in the editor from whatever location they want.
    - is it correct that the metadata tab cannot be used in combination with profiles defined in UCM (see other thread WebCenter Content
    I've heard that before so my guess is that it's true. My question then is how do I do to hide the metadata tab if I do not use it?
    - will you be using the ctrl-shift-F5 functionality to edit content, or just create a link to the WCM_EDIT_... service in a popup window?
    We create a link to the WCM_EDIT_... service that opens in the same window as the portal.... but as I mentioned earlier that is not the most user friendly solution so we probably must change that....
    Now back to my problems:
    I know why the preview trough the portal and the site studio differs.
    The services that are used when previewing content trought the SS are:
    SS_SET_PREVIEW_ELEMENT_DATA
    SS_GET_PAGE
    LOAD_DOC_ENVIRONMENT
    The services that are used when previewing content trought the portal are:
    SS_SET_PREVIEW_ELEMENT_DATA
    SS_QD_GET_RENDITION
    LOAD_DOC_ENVIRONMENT
    The SS_GET_PAGE actually shows a page in SS and as soon as there is a region template attached to the page you are able to see the content the way you want. That is not the case then calling the SS_QD_GET_RENDITION service. So my question is if there is a workaround where I can force a region template to be used con conjunction with the SS_QD_GET_RENDITION service?
    Anyone? All ideas are really appreciated!

  • Photo Browser doesn't work

    Problem started a few weeks ago. When I bring up the composition window and click on photo browser I can see all the photos but I can't drag or double click on them to embed in the body of the email. It doesn't show an attachment either. Just can't get the pics into the email. However when I drag an image from photo browser to the desktop and then just drag that pic icon directly to the mail icon in the Dock it will work. The picture will be show up in the body of the email which I want and I email it. I can't copy and paste an image into the body of the email either, which I was able to do at one time. A simple step by step solution would be appreciated because I am new with Macs. Thanks for a reply.

    Start a new mail message > Click attach on the toolbar > Scroll down to Media on the sidebar of the file browser > Click photos which will take you into iPhoto > Find the photo you want and click on it, a blue border will appear around the photo > Select send windows friendly attachments if necessary > Click choose file. The photo will be in your email ready to be resized with the options bottom right of the message window.

  • WLC2106 access via my web browser doesn't work

    Pls can someone help. I cannot use my browser to access a wireless lan controller-2106 so i can complete configuration.
    I have entered the initial configs at startup via console with the wizard.
    I am running vista, i have made sure my PC is on the same subnet as the management IP. I can even ping the controller but when i ping my PC from the controller, it doesn't get through. I have also tried using windows XP. Or is GUI not possible on this platform?
    Anyone help please.
    Thank you.

    Its ok now sorry, my mistake. I used a different port to connect to the device which is different from the management i/face port num i set initially.

  • Web browsing doesn't work

    Hi all.
    I have a problem with my MacBook. Sometimes I can not browse internet. Internet is connected, skype, lync, outlook, everything is ok except web browsing. Chrome and Safari browsers do not work - it looks like there is no internet conectivity.
    I have a windows based PC connected to the same router and everything including web browsing is ok there. Only mac has problems.
    I am really confused from it. Can you help me?
    Thanks a lot.

    I have a windows based PC connected to the same router and everything including web browsing is ok there.
    Only the Mac has problems. Chrome and Safari browsers do not work.
    Internet is connected, skype, lync, outlook, everything is ok except web browsing
    And I couldn't reach admin page of my router from os X.
    If you have room on the Mac's boot drive, create another Admin account and log into it and try Safari and Chrome there.
    If it works, install Firefox right away as it's a non-Webkit browser, which Safari, Chrome (and now Opera) are and suspectible to the same exploits that Apple just released a huge patch for. So also hit Software Update until clear.
    Run through this user tips
    ..Step by Step to fix your Mac
    Diagnosing network issues
    Mac maintenance steps
    Try the Mac in both accounts at other Internet locations, also bypass the router and connect to the modem (power off/on) directly to see if your router is the cause (compromised or outdated) by the Windows PC.
    A white hat hacker just released publically a proof of concept code for a Windows vulnerability without first notifying Microsoft

  • Preview of Transaction iVew doesn't work

    Hi,
    I have created a very simple transaction iView to allow users to call transaction SM30 in my BI system from the Portal.  I have the iView assigned to a role and everything works fine when I log in as my demo user. 
    However when I preview the iView as an administrator, the gui loads up the "easy access" menu, not the SM30 transaction code.
    - Single signon / user mapping are working correctly; when I preview the iView I can see my admin user has an rfc connection to my BI system
    - The admin user has the authorisation in BI to run transaction SM30, in fact once the iView has loaded the easy access menu, I can then manually call the transaction and maintain the required table.
    So I can't see this as either a connectivity or an authorisation error.  Does anyone have any idea what else I could have missed here??
    Thanks,
    Sue

    Hi Michael,
    No, the preview of the page as the administrator does not work either.  And I double checked the patch levels with my basis admin - he confirmed that the portal is actually still on patch 18.  On my BW system, the SAP_ABA and SAP_BASIS components are patch 17 while SAP_BW is patch 19.
    Do you think this is simply a feature of my current patch levels that should be fixed in future versions?
    Thanks,
    Sue

Maybe you are looking for