Preview: Unable to modify previously annotated document

Aloha all,
I began annotating a document in Preview using Highlight, Underline and inserting notes. I did a file save as and wanted to continue with the document later.
Upon re-opening the document, and making sure the Text select tool was selected, I am unable to select any text in the document.
In the Inspector window (command + i) under the heading Encryption it says I have full permissions for this PDF, but under the heading Annotations it has a greyed out line of text saying "Cannot Edit." I opened the permissions on the file 777, but still cannot select any text.
Thank you for any assistance or guidance that you can provide.
Preview Version 4.1 (469.2.2)
Mahalo,
Liko

Hi,
Reading below description, looks like your issue is discussed in below link.
http://www.cisco.com/en/US/ts/fn/633/fn63320.html
Please check and see if you have this behavior and upgrade the code. Thanks.
Ahsan

Similar Messages

Problems Editing Previous Annotations with Preview

Hi,
I was just wondering if anyone else has had a similar problem with Preview and/or has any advice on how to fix it.
Ever since upgrading to Mountain Lion, I've been having problems whenever I try to edit any of my text annotations in Preview. All of my notes for school are given as PDFs, so I have always used Preview and the textbox function to take notes during lecture. Before I upgraded, if I opened a previously-annotated document to study from and wanted to change something or add to the text, I would simply double-click the textbox and be able to fix it in 1 second.
Unfortunately, trying to make any changes to annotations has become a major process ever since switching to Mountain Lion.
Basically, as soon as I double-click any textbox to edit something I wrote at an earlier time, the box will shrink up to a single line that goes off the page and into oblivion. I have to resize the textbox over and over again just to fit it back on the page, which can be time-consuming and frustrating when paragraphs of text are suddenly condensed to one line that extends ten miles beyond the margins. It happens both with older documents from Lion and with the new documents I've only downloaded and annotated since upgrading to Mountain Lion. I thought maybe it was just my computer, but I tried it on a friend's Mac with Mountain Lion and had the same problem.
I have only used Preview for everything, so all of my annotations have been made using the same program. Also, it gives me no trouble if I try to edit as long as the document remains open; it only happens after I close out of a document and open it up again at a later time (even if it's immediately after closing it). Unfortunately, I can't keep 200+ documents open on the chance I might need to edit them at some point.
If anyone has any clue how I can stop this from happening in Preview or has a suggestion for another good PDF editor (aside from anything Adobe preferably), I would really appreciate it!!
Thank you very much in advance.

This is happening to me too! It's so frustrating especially since I've come to love Preview before upgrading to mountain lion. At first glace it seemed Preview had become more userfriendly with the textbox, line and circle drawers all separate icons now but the textboxes are such a pain. I know it only takes an extra 5 seconds or so, but by the time you add all the 5 seconds' up, it's heaps of time. It's especially hard if I'm listening to a lecture and I have to stop and fix my textboxes while the lecturer is still talking.
Sorry this isn't much of a solution, but I hope you don't feel alone dealing with this flaw!

Print Templates print preview window closes unexpectly when printing document

This is a cross posting from Internet Explorer Web Development after a suggestion that this forum would be a better location. See
https://social.msdn.microsoft.com/Forums/ie/en-US/351e1245-b606-4467-9f3c-1c72f9cdf9ea/print-templates-print-preview-window-closes-unexpectly-when-printing-document?forum=iewebdevelopment.
I have raised an issue through Connect for this:
https://connect.microsoft.com/IE/feedback/details/1134168/ie9-to-ie11-print-templates-print-preview-window-closes-unexpectly-when-printing-document, but I would like some more visibility of the issue as my customers thought my application was closing when
they printed a document. I also don't know if an issue in Connect gets any priority support via MSDN, but this forum does.
This looks to me like a problem in the IE Print Templates startDoc API call, but if there is a more appropriate forum to raise this issue in please let me know.
In the application where I use print templates, the window closing is not in it self a problem because the Javascript that is calling startDoc also closes the Print Preview window when the print is finished.
The fact that the application looses focus and can be hidden by the windows of other applications when the Print Preview window is closed by startDoc is the issue noticed by our customers, so I need a fix preferably, or a work around at a pinch.
Details of the issue reproduced below.
When using IE Print Templates, the startDoc function is causing the print preview window to close. This behaviour started with IE9, and is still present with IE11.
When an application is using print templates (see
https://msdn.microsoft.com/en-us/library/aa753279(v=vs.85).aspx) for print functionality, this has the effect of causing the application to become hidden by any other application window once printing from the print preview window has started. It is
actually this behaviour that started me looking at this issue as the users thought the hosting application had closed.
Print Templates are not accessible by using IE as a web browser, but only when using the WebBrowser Control to embed IE in an application. The reference for this feature is available from this url:https://msdn.microsoft.com/en-us/library/aa753279(v=vs.85).aspx
and a sample Microsoft application that demonstrates the use of Print Templates can be used to demonstrate the problem (required for the reproduction steps). The application is available via this article and searching for "download spiffy".
Steps to reproduce the problem:
To see the full effect of the issue, first ensure there is a window from another application (like Windows Explorer) that will cover the sample applications window if brought to the foreground (making the Windows Explorer window full screen works).
Start the sample application (and ensure that the full screen Window Explorer is the next application to activate).
Then in the drop down box in the top right corner of the UI select Template8.htm.
Click the Print Preview button that is just below the drop down box (this will open a new Print Preview window).
In the new window click the Print… button (this will open a Print dialog).
Click the Print button at the bottom of the Print dialog.
The Print dialog closes (expected) and then the Print Preview window also closes (not expected), however the document is still printed successfully.
When the Print Preview windows is closed unexpectedly, the Windows Explorer window is brought to the foreground (obscuring the sample applications window).
If you reselect the sample application and click the Print Preview button again, the Print Preview dialog is not displayed unless you restart the application (this looks to be a symptom of the same issue, not a separate problem).
To see that the Print Preview window appears to be closed by the startDoc call, use the resource editor in Visual Studio (the exe can be opened directly by File | Open | File…) to edit the HTML resource "TEMPLATE8.HTM" (I found I needed to delete
it and add it back in for the change to stick), find the startDoc call and add two alerts, one on the line before and one on the line after. When IE is accessing the template, it is being done using the name of the executable (so do not rename the modified
version of printtemplates.exe, make the changes to a copy in a different directory if you don't want to change the original). Start the modified version of the application and follow the same steps as in the reproduction. This time, after clicking
the Print button in the Print dialog, the dialog will close, the first alert will pop up, then the Print Preview window will close, then
the second alert will pop up.
Thank you,
Warren.

Hi Shu,
I have noticed that the print templates API is listed as part of the Legacy APIs.
Is this just because it hasn't changed or is not new? Or does this mean that it is no longer maintained and may be removed (or at least deprecated) at some point in the future?
It would good to know if we should start planning for the implementation of a different method of printing.
I understand that the sample application is no longer maintained, but I also think that the Print Template API that it uses has not changed, and so should still work (and it does mostly).
If the Print Preview window was being closed as a result of using the Print dialog (and if it had behaved the same way with IE8) I would be willing to go with the by design argument.
I have found that the Print Preview window is not closed until startDoc is called, and it closes before control is returned from the startDoc function.
Just as part of investigating and try to find a workaround, if I call window.close(), any alert calls made no longer display the alert window after the close call.
Alert still functions after startDoc has closed the window however.
The is not the sort of consistent behaviour I would expect from something that is by design.
Also while investigating, I found that calling startDoc after calling window.close() results in an exception with the error code -2147467259 (0x80004005), this is probably quite normal and expected, but does indicate that the Web Browser Control should
not be closed till after printing.
I had found that old thread, and I had concluded it was the same issue, but it was also aimed at different aspect of the problem (which I see in the sample application, but not my application).
The visible issue I have is that my users think the application has been closed because after clicking print (on the Print dialog) the application gets hidden by other windows from other applications.
This aspect affects the sample in the same manner and so it was a convenient way to demonstrate the problem.
If IE connect do not look at this issue any time soon, do I have any other avenues to resolve this issue?
Thank you,
Warren.

Preview will not let me annotate document with text and save - HELP!

I have to provide a JPG document to a client that they need to annotate with text in Preview. However, Preview will not allow either of us to save this document once it is annotated, even though I created the JPG through an exported Illustrator File (and therefore have rights to the document).
I have talked to many other people that have annotated documents with text in Preview & save the document without problems, so I have not been able to receive any helpful information to correct this issue.
... Or are there any other suggestions of programs that my client can open the JPG in and annotate with text? She also has a MacBook Pro and would be willing to download a program if it was reasonably priced/free.
Please help!

Have you turned on MMS messaging in Settings?

I am unable to modify template properties

Hello,
I have noticed that I am unable to modify properties of my template. The "Template Properties" menu is disabled.
I made a basic html page and saved as template, by thinking that my template is not proper.
But nothing change
What migth be reason for this strange situation in CS5 and the any solution?
Thanks

Of course I have editable regions.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>

head
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Untitled Document</title>
</head>
<body>
EditRegion1
OptionalRegion1
</body>
</html>
I am trying to change OptionalRegion1 property to enable/disable

Develop smart forms from scrach or modifying previous layouts or migrating

hi experts can u plz tell me,
can we we develop smart forms from scrach or modifying previous layouts or migrating scripts.
thanks in addvance

Hi,
Go through the following Links, here u can find example with step
by step.
http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
Check these step-by-step links
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/ccab6730-0501-0010-ee84-de050a6cc287
https://sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/8fd773b3-0301-0010-eabe-82149bcc292e
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/3c5d9ae3-0501-0010-0090-bdfb2d458985
Check these links also.
http://www.sap-basis-abap.com/sapsf001.htm
http://www.sap-press.com/downloads/h955_preview.pdf
http://www.ossincorp.com/Black_Box/Black_Box_2.htm
http://www.sap-img.com/smartforms/sap-smart-forms.htm
http://www.sap-img.com/smartforms/smartform-tutorial.htm
http://www.sapgenie.com/abap/smartforms.htm
for Smartforms material
http://www.sap-basis-abap.com/sapsf001.htm
http://www.sap-press.com/downloads/h955_preview.pdf
http://www.ossincorp.com/Black_Box/Black_Box_2.htm
http://www.sap-img.com/smartforms/sap-smart-forms.htm
http://www.sap-img.com/smartforms/smartform-tutorial.htm
http://www.sapgenie.com/abap/smartforms.htm
How to trace smartform
http://help.sap.com/saphelp_47x200/helpdata/en/49/c3d8a4a05b11d5b6ef006094192fe3/frameset.htm
http://www.help.sap.com/bp_presmartformsv1500/DOCU/OVIEW_EN.PDF
http://www.sap-img.com/smartforms/smart-006.htm
http://www.sap-img.com/smartforms/smartforms-faq-part-two.htm
Re: Need FAQ's
http://www.sap-img.com/smartforms/smart-006.htm
http://www.sap-img.com/smartforms/smartforms-faq-part-two.htm
Re: Need FAQ's
Regards,
Priyanka.

Unable to clear a GR document via f.13

Hi,
My user is unable to clear a GR document via F.13 since the IR document had been clear with other document.
It was noted that GR document do not have a matching document.
User try to clear the GR document manually via F-03 by manual entering the clearing to offset but this leaves the clearing document as open.
Please advise.

Hi,
Above credit entry in GR/IR account is at the time of GRN, and 2nd debit entry in GR/IR account will be at the time of Invoice. see below entry.
Debit GR/IR 690
Cr. A/P(vendor) 690
Therefore in GR/IR account is open item manage account, and you can see the debit 690 and credit 690, in GR/IR account, and this you have to clear in F.13 please check and confirm.
You can also view the PO history in ME23N, to verify that the invoice is posted or not, and if invoice is posted, then click on invoice doc, then go on followup FI document, which will show you what account has been debit.(this should be GR/IR with 690).
Your vendor invoice will be cleared once you it pay it through F110/F-53/F-58.
Regards
Javed

Unable to find this Oracle document ID 1277924.1

Hi All,
Unable to find the below document provided by Oracle Support
WebCenter Page Hangs with Web Page Layout Components Referring to JSF Pages (Doc ID 1277924.1)
Any help will be appreciated.
Thanks,
Somnath

Unable to find the below document provided by Oracle SupportMe neither. Just tell support to provide you more information.

The Document Information Panel was unable to load. The document will continue to open ?

I am using Sharepoint 2010; DIP in microsoft word all the while is working fine, not sure why suddenly it came out the following error when save word doc into sharepoint.
ERROR MESSAGE
===========
"The Document Information Panel was unable to load. The document will continue to open.
The form contains schema validation errors.
Content for element 'documentManagement' is incomplete according to the DTD/Schema. "
How to troubleshoot? Recently I added lookup column and a workflow into the library, but I did the same thing in another library which never appear to have any issue on it.

The lookup column is creating the problem , you can find powerscript solution to fix this issue , please check this -
Fix through Powershell
http://blogs.msdn.com/b/tehnoonr/archive/2012/05/17/sharepoint-2010-document-information-panel-fails-to-load-when-office-documents-are-opened-in-a-library-that-contains-lookup-columns.aspx
Fix through Code
https://social.msdn.microsoft.com/Forums/office/en-US/2a4d6d10-d1d5-4d6a-a22b-62dfb6b60685/lookup-field-creation-and-document-information-panel?forum=sharepointdevelopmentlegacy
or try this -
https://social.technet.microsoft.com/Forums/office/en-US/2552fbc8-da24-4d2b-84f6-d39c4d58b137/the-document-information-panel-was-unable-to-load-the-document-will-continue-to-open-for-more?forum=sharepointgeneralprevious
1. Open this location- C:\Program
Files\Microsoft Web Designer Tools\Office12\1033\IPEDINTL.DLL
2. copy IPEDINTL.DLL
3. paste it here- C:\Program Files\Microsoft
Office\Office12\1033\IPEDINTL.DLL
4. Close all the applications that are presently
open as well as all the browsers
5. Open the sharepoint site in a new browser
and check the results !!
Thanks
Ganesh Jat [My Blog |
LinkedIn | Twitter ]
Please click 'Mark As Answer' if a post solves your problem or 'Vote As Helpful' if it was useful.

How to make previous version documents(CS1 and CS3) without extension readable in InDesign CS5

I have some previous version documents of CS1 and CS3 on Mac which have been saved without any extension e.g 300, CS3doc etc.
When I open such documents in InDesign CS5 they appear to be unreadable . Only on selecting 'All documents' filter I am able to open those documents.
I want to make all such documents (which are without extension) readable with 'All Readable Documents ' also .
How I can do that, please help me !!!!!

The first thing I'd do is make sure the issue is really what I suspect it is - i.e. I suspect your extension-less documents don't have the proper type and creator.
If you fire up a Terminal window, you should be able to use the GetFileInfo command to check one of the files:
Assume 'sampleFile' is sitting on your desktop, you'd do
GetFileInfo ~/Desktop/sampleFile
(not sure when/whether GetFileInfo is installed on a Mac - I think it used to be part of Apple's developer tools, but on my Snow Leopard it resides in /usr/bin)
Check what it says for 'type' and 'creator'.
If these are not correct, we've confirmed that that's the reason why they don't show up in your file dialog.
If the issue is type/creator related, I can think of the following options:
a) Change your code to accept ANY file type/extension - I suspect this would work (not tested!):
openFileDialog->AddType( '????' );
If memory serves right, '????' should be accepted as a wildcard.
b) correct the file types BEFORE they are viewed in the File Dialog - for example, if these files are in a very specific folder somewhere, you might be able to scan the folder, and correct their type and creator (e.g. iterate through all extensionless files in folder 'xyz' and change their type and creator). A lot depends on how those files get there, and whether they are tied to a specific folder or not - are they 'old' files, or are they being generated in some workflow? If they're all over a user's system or all over a file server, such pre-scanning and cleaning up file types approach will be a no-go.
Cheers,
Kris

PC/64/Windows 7/XIStandard recently installed/unable to put footer into document because I can't move to the bottom of the image when in footer application mode. Display is at recommended 1920x1080. Is there a solution or is it a flaw in the program?

PC/64/Windows 7/XIStandard recently installed/unable to put footer into document because I can't move to the bottom of the image when in footer application mode. Display is at recommended 1920x1080. Is there a solution or is it a flaw in the program?

Don't have a direct answer. But did you install the updates. They might resolve the problem.

Replacement iPad 4th generation WIFI/3G saying no SIM CARD and unable to restore previous settings

Replacement iPad 4th generation WIFI/3G saying no SIM CARD and unable to restore previous settings

Hi Inez2317,
Thank you for participating in the Apple Support Communities.
It sounds like you see a "No SIM" message on your iPad. You can find some troubleshooting steps that can help at this link:
If you see 'No SIM' alert on iPhone - Apple Support
Although the article references the iPhone, most of the steps can help troubleshoot an iPad as well.
All the best,
Jeremy

Vendors Unable to Check-In Contract Documents (e-Sourcing 5.1 Patch 06)

Vendors Unable to Check-In Contract Documents (e-Sourcing 5.1 Patch 06)
When moving to patch 06 for e-Sourcing we found that Vendors were no longer able to check-in contract documents, even though they checked them out successfully.
On Patch 05 this was not an issue with the exact same configuration.
Has anyone had any encounters with this?
- Is there a permission that needs to be set to something specific? I tried create/read/edit but that doesn't seem to work.
Thanks.

When working with a Master Agreement or Sub Agreement within e-Sourcing you can attach Contract Documents (Word files) that you and the vendor can collaboratively work on.
Just like a source control system you can check out a document to make edits to ensure that no one else makes edits at the same time. You then must check back in the document to remove the 'lock'.
On patch level 06 we found that although Vendors could perform the Check-out procedure (On a Contract Document click Actions -> Check-Out) they are not permitted to then check-in the document (Actions -> Check-In).
Buyside users do not experience any issues with check-out/in.
Hope that helps clear up the issue.
Thanks,
Greg

My newest version of Pages won't open previous saved documents. It keeps saying this version not supported please update, but it already is. Please help.

My previously saved documents in Pages will not open. When I click on one of the documents it is saying, "you need a newer version of Pages to open this document. You can download the latest version of Pages from the Apps Store, but when I click on the apps store, it states that is installed and running the current version. Help, I can't open any of my saved documents.

The problem is that you have both versions of pages on your computer - pages 09 is in the dock with the old ink pot icon - pages version 5 (orange pen and paper icon) is in your applications folder. Delete your pages 09 icon from your dock by dragging it upwards in a puff of smoke - and drag the pages 05 icon from the applications folder to your dock and use that in future. This fixed it for me.
I presume I can uninstall pages 09 now. You need to do the same with numbers and keynote.

BAPI_ACC_DOCUMENT_POST to modify an accounting document

hi,
somebody knows how to use the FM BAPI_ACC_DOCUMENT_POST to modify an accounting document?
I use:
lw_cab-username   = sy-uname.
lw_cab-doc_type   = 'KR'.
lw_cab-comp_code = '0001'.
lw_cab-bus_act = 'RFBU'.
lw_cab-obj_type = 'BKPFF'.
lw_cab-obj_key = '190000032000012007'.
lw_cab-obj_sys = 'HRDCLNT100'.
* I only want to modify this field.
lw_cab-ref_doc_no = 'NEW'.
CALL FUNCTION 'BAPI_ACC_DOCUMENT_POST'
    EXPORTING
      documentheader = lw_cab
    IMPORTING
      obj_key        = l_obj
    TABLES
      currencyamount = li_currencyamount
      return         = li_return.
but it doesn't work.
I also need to reverse an accounting document with BAPI_ACC_DOCUMENT_REV_POST.
Somebody knows an example that works?
Thanks,
Ángel.

Hi,
             see note 487722.
The posting key is automatically assigned by the BAPI, u can't transfer it.
The BAPI decides which posting key ahs to be used in order on the kind of item and operation key.
So you can try to drive the posting key assigning a certain operation key in the item.
Try to check the fm FI_GET_POSTING_KEY.
I believe you can decide which operation key to be used only in the G/L items (BAPIACGL09-ACCT_KEY), for the customer the BAPI uses the keys 01 and 11.
U can see how the BAPI decides which posting keys has to be used in the form fill_acct_key in the include LACC9F20.
Check the therads.
BAPI_ACC_DOCUMENT_POST issue with posting key
BAPI for transaction FB01 with account posting key
<b>Reward points</b>
Regarsd

Preview: Unable to modify previously annotated document

Similar Messages

Maybe you are looking for