Preview While Capturing High Def in Pro CS4?

Greetings:
Running Vista 64 bit, 12 GB RAM, Intel Core i7, NVidia GTX275. When I capture high def via 1394 from my Sony tape-based camcorder, the preview screen in the capture window changes to that text message, and does not show the video. Is there a setting that I am missing somewhere, so that I can see the video being captured? Surely this machine has enough power to handle that...
Thanks in advance for any replies.
Norm

Norm,
Unfortunately, there is no Preview, when doing a Capture of HD material. This is felt to be a major shortcoming of PrPro, but that is the way that it is.
Sorry for the bad news,
Hunt

Similar Messages

Capture hdv in Premiere Pro CS4

Hello
I captured hdv in premiere pro CS4,
the file was mpeg.
I wonder,
Why only mpeg file format?
not avi
There is no options in premiere pro CS4? - avi or mpeg

HDV is MPEG2 and capturing is only a tranfer of data, nothing more.

No preview while capturing in FCP7?

We have two FCP setups. Each one has a Blackmagic SDI capture board. One is a MultiBridge Pro II, the other has a Decklink SDI board. Both of the Macs are identical, MacPro 3,1: 8 core 2.8GHz Xeons with 6 and 8GB of RAM. They have the same graphics card and are both running Mac OS X 10.6.8. They both have the same version of the Decklink software, v9.2.
On the system that has a Decklink SDI board, when we capture we get a preview in the Log and Capture window, as well as a preview while the capture is in progress.
On the system that has the Multibridge, we get preview in Log and Capture, but not while the capture is in progress. Instead, we get text that says Final Cut Pro, above an apple logo. the status at the bottom of the capture window says it's capturing and in fact, the resulting captured file is fine. This used to work fine, until a few months ago. I don't know what changed that may have cause preview to go away, but we used to see it on that system.
Are we missing a setting somewhere that might be causing this? it's really annoying to not be able to see where a capture is at, or that it's working properly
thanks.

Have you tried talking to Blackmagic?
Of course the first thing to do with almost any fcp problem is to reset your preferences.
https://discussions.apple.com/docs/DOC-2491

Use of a capture board in Premiere Pro CS4

For several years I have been using Premiere Pro 1.5 with a Canopus Storm 2 capture card and drivers. It has been working fine for me. Actually I have been doing event video for about twenty years and have gone through a lot of Premiere progams. I went from VHS to S-VHS and then into Mini DV. I don't think I will be going to HD. However, like life, we need to keep up with some of the changes. So I have been considering upgrading to Premiere Pro CS4. I was told that Canopus is no longer working with Adobe and that now it is Grass Valley and they have their own editing software. They no longer want to let the user of their products use Adobe products. If this is so, then what type of capture card is working with Premiere Pro CS4? And what is the cost for my changing my system? At least a ball park figure. I just had a new OS put into my video editing computer and right now everything is screwed up. The Adobe Premiere Pro and Canopus seem to be working okay, but I am not getting anything out from my computer to my editing monitor and sound mixer. I worked all week on it and to no avail. For years I did event video and put out some fantastic stuff, now I just want to do some informational videos and nothing is working right. I am open for suggestions.

Okay Harm, that is part of the problem. Since I put in a new OS I can't get my video editing to do right. Nothing is showing up on my studio monitor that is hooked to the Storm 2 card and nothing is coming in to my Mackie 1402 VLZ Pro line mixer that is connected to a CREATIVE Sound Blaster Live card. I have done everything I can think of and nothing is coming out. I have everything hooked up just like it has been for the past five or six years. I downloaded all of my software - Previere Pro first and then Canopus and then Sound Blaster and the plug-ins seem to go in okay. What I am getting is a sound apperance on the Premiere sound screen and also a wave form on the timeline. In all apperance the Storm card and the Premiere are working, but nothing seems to be coming out. Also I am getting no sound out when I download music in Audition. I did before I replaced my Windows XP SP3 OS.
I didn't know that the Canopus Storm 2 had a conflict with PP 1.5. I guess I never experienced any trounble before.
I just now went into my Adobe Premiere Pro 1.5 and opened up a capture that I had downloaded into the timeline. Here is what happens. When I scrub the Capture monitor in PP everything works fine in the computer and the studio monitor and sound line mixer. But when I scrub the timeline I get no sound out, and nothing shows up on my studio monitor. It is almost like everything is reverse.

Need Help Fast Re: Problems with capturing in Adobe Premiere Pro CS4

I am working on a project with a deadline. I am using Adobe Premiere Pro CS4. My camera is a Sony Digital Video Recorder DCR-HC26. My computer is a Dell with OS of Windows Vista. I have been capturing numerous clips from hundreds of mini digital video cassettes. Yesterday, I attempted to capture from a Radio Shack Mini DV Metal Evaporated mini DV digital videocassette. For whatever reason it will not capture. I have never used one of these tapes before. Could it be the tape? After I click on "Capture," the screen shows NO PICTURE of sound, however, it plays on the camera. It can't be the camera settings because all the other tapes work. . . Any advice?

you need to post in the correct forum olivia.
http://forums.adobe.com/community/premiere/premierepro_current

No Preview While Capturing

In CS4, I was able to see HD video in the Capture panel until I pressed rhe Record button, then it was replaced by a multi-language screen. But in CS5 I can never see any video in the Capture panel, though CS5 does capture the video. This is my first time with CS5 and it's a new computer that I had to install a SYBA PCIe Firewire card in ,just to capture. On a possibly related note. I tried using HDV-Split to record the HD video, but every time I pressed Record, the capture stopped. But both CS5 and HDV-Split recognize the SONY FX7 I'm using to play the video and CS5 does capture the video.

I tried reverting to the legacy drivers but it didn't help. And again my programs ARE recognizing the camcorder, but the video is not being displayed in the programs and HDVSplit stops a few seconds after starting.
Update: I bought a new PCIe x1 firewire card. Now I can see the video in the Capture Panel and in HDVSplit, and I can capture video in one long file. But when I try to use Scene Split in either Ppro or HDVSplit, both stop recording after a few seconds or a few minutes.
Message was edited by: sneedbreedley

Why when after I preview render my videos in Premiere Pro CS4, everything is off-screened???

Before I preview my videos, they all looked fine in on the preview box.
But after when I preview rendered them, everything looks off... the positions and the scalings of the videos are all totally squashed and sideways, like as if it's a corrupted file or something..
And another issue - when I want to final render out the videos, nothing seems to be moving at all... I have more than enough hard disk spaces, but they just won't move at all... why is this??
I'm using Premiere Pro version 4.0.1. (the latest version if I remember)
Please help / advice, thanks

Welcome to the forum.
What are the full specs. of your Source Files, and also your Sequence Preset?
It sounds like you have a mis-match in there somewhere.
Good luck,
Hunt

Slow Playback in Premiere Pro CS4 (how do you lower preview res?)

Hi everyone, I was just wondering how to lower the playback/preview resolution while3 editing in Premiere Pro CS4? I'm editing 720p video (.mov format, that's what my camera shoots in, so I don't think I can change that). All I can see when I right click the source monitor is "Quality > High, Draft, Automatic". Is there anything else I can select? (kind of like in after effects, where you can set it to 1/2, 1/4, etc.). I've been searching the internet for the better part of the day and all I've found is that 'quality' menu I mentioned earlier.
It's still painfully slow to watch on 'draft', and it doesn't look like it makes that much of a difference in quality. Now, my laptop isn't exactly the rendering beast I'd like it to be, but it can handle 720p [slowly] in after effects so I think it should work in premiere too.
Thanks!
PS: Any of you experts think this would be a good computer for NLE / rendering effects?
http://www.tigerdirect.ca/applications/SearchTools/item-details.asp?EdpNo=7192259&Sku=B69- 1277

Thanks for clearing that up!
New desktop it is... I'll probably be swapping out the low power drive for a faster one, since Harm mentioned that in his 'building for NLE' thread.
Oh yeah, one more thing: How can I force it to render? For example, I put an HD clip into the timeline, it has a yellow bar along the top of the timeline in it's location, yet when I hit enter it just plays (with annoyingly low fps)?? Going to sequence > render effects in work area doesn't work either.

Can't Uninstall Premiere Pro CS4 from Trial-Missing Uninstall file

I was using the Premiere Pro CS4 (CS5 XP compatibility pack) as a free trial on my Windows XP computer. Since my trial period is over, I want to uninstall it. Unfortunately, something seems to be wrong. When I click on "Premiere Pro CS4 and After Effects CS4, 32-bit support for CS5" in my Add or Remove programs list, it says "An error has occured while trying to remove Premiere Pro CS4 and After Effects CS4, 32-bit support for CS5. It may have already been uninstalled. Would you like to remove Premiere Pro CS4 and After Effects CS4, 32-bit support for CS5 from the program list?"
I click No, because going into my Programs Folder, I see that nothing has been removed. I tried using the Clean Up script, choosing CS4 and later CS5, but the clean up program's box said no sessions were found.
After, I looked in the Adobe Premiere folder itself for an uninstall program, but found none.
I cannot even start the program anymore. Starting it, a dialogue box pops up saying
Licensing for this product has stopped working.
This product has encountered a problem which requires that you restart your computer before it can be launched.
If you continue to see this message after restarting your computer, please contact either your IT administrator or Adobe technical support for help, and mention the error code shown at the bottom of the screen.
Error: 3
As far as I can tell, technical support doesn't come with a free trial, and my trial is expired anyway.
How can I get this program off of my computer now that I cannot use it?

=========
It may have already been uninstalled. Would you like to remove Premiere Pro CS4 and After Effects CS4, 32-bit support for CS5 from the program list?"I click No, because going into my Programs Folder, I see that nothing has been removed
===========
This is the part I suggested you click YES...instead of NO... to see if removing the support then allows you to remove the whole program.. kinda a 2 step process...dont know if it will work or not.
You can call adobe support and explain the problem and they might be able to walk you through some process that works okay.. I would try that even though it may take some time to go through it.
I don't see how trying to reinstall could hurt you but I kinda doubt it will work...but why not try it??
Sorry, but I can't think of anything else ... except messing around with the "install / remove " programs stuff as mentioned above...

System crashes while capturing in CS5

Recently installed Samsung Kies software for supporting my Galaxy cell phone. Same day Win7 started crashing while capturing video in Premiere Pro CS5. It crashes after random number of minutes capturing. There's no problem with any other aplication, Adobe or not, and Premiere Elements7 captures video with no problem at all. Uninstalled Kies but Win7 keeps crashing. Any experience with this combination of softwares?

I have one computer for everything http://forums.adobe.com/thread/652694?tstart=0 and have not had any problems
But, I do not have and have never heard of "Kies" software
Generally speaking... if something works and then stops working when new software is installed... that is clear to ME that the new install is the problem
I always make a full boot drive image before installing anything
You should buy software to make a full backup of your hard drive to an external USB hard drive... which makes restoring very easy
The product I use is at http://www.terabyteunlimited.com/image-for-linux.htm
Image runs off of a bootable CD via Linux (the Zip you download includes a program to make the bootable CD) and it reads EVERYTHING on the drive, even the hidden registration information, so everything is restored when needed... and you may restore the image to a brand new drive and not have to re-install anything
Please note that I own no part of Image, and I don't get a referral fee (that is just a plain web link) but I use the program and it has saved me a LOT of trouble when I had a hard drive die... and I was able to restore everything and not have to re-install or re-activate a single program, from Windows on up

'Locating Timecode Break' while capturing

I got the software update that claimed it would fix the time code break error while capturing using Final Cut Pro. I'm using an AV Converter to do this. These are the setting I have it on, as recommended by the directions on the box the converter came in.
Device Control: Firewire NTSC
Capture.input: DV NTSC 48 kHz
Time code break usually occurs at around one minute, sometimes much later, other times almost instantly. I've got a legit copy of Final Cut Studio 2, and my converter always worked fine when I used it with Final Cut Express. Tried cleaning tape heads, but that didn't seem to have any effect. I'm open to any suggestions at this point, and I'm hoping it's just something simple that I might be overlooking.

check the following:
you are capturing to an external drive and not the sytem drive
capture settings for non-controllable device
correct version of Quick Time for your combination of FC Pro and Mac OS
the analogue to Firewire box settings (if any) are set to NTSC, for Firewire output and analogue input and set to composite or Y/C as appropriate

Premiere Pro CS4.2.1 preview window has become jerky (more details)

I am using a PC, Quadcore (Athlon II X4) 64 bit Windows 7, 4 internal Hard drives (all single partitions, NTFS), 8GB RAM. I am using Production Premium CS4. My graphics card is an ATI Radeon 4850 running the latest Catalyst drivers (or at least the ones from 3 days ago). I am using 2 TFT monitors, both running at a resolution of 1280x1024.
The hard drives are arranged as:
80GB windows drive (where CS4 is installed): 14GB free
500GB: Cache files stored here: 270GB free
2TB: raw footage for a new project: 844GB free
1.5TB: scratch files and all other project files stored on here: 204GB free
I put in a new Internal 2TB harddrive & installed a black magic plugin for some high def footage (the decklink software from www.blackmagic-design.com)
All preview playback in Premiere Pro has become jerky and unmanageable: only a few frames per second. Before installing the blackmagic plugin playback was smooth with all video sizes, now I can only achieve smooth playback with a tiny (~10% size) preview video.
I tried uninstalling the black magic plugin and changing catalyst control centre settings (regarding playback) neither of which worked. I tried to do a system restore on the windows drive, but this failed. I also tried disabling hard disk indexing for windows search in case this was having an effect, but it seems to have made no difference.
I have tried everything could find on message boards; old DV footage that was fine previously will no longer play smoothly it seems likely to me that this is a software configuration issue.
I have an ATI Radeon 5670 card which I'm going to try today. Other people have mentioned switching to nVidia cards, but I don't want to shell out for a new graphics card unless it is guaranteed to solve the problem once and for all.
Any help would be greatly appreciated, if any more details would be useful then let me know and I'll post more information.

I've just removed a large number of temporary files, uninstalled a few unnecessary programs (e.g. nero) and have moved the swap space away from the OS drive to being spread over the other drives. I've disabled disk indexing, removed unnecessary windows services and run CCleaner. I also followed (most of) your guide on setting a system up for optimum performance.
I should note that Windows Media Player doesn't have a problem with playing large files, and so it appears the problem is localised to Adobe software.
The time taken to render DV footage has increased dramatically almost tenfold. This is something of a guess, but could Adobe be using the CPU to render video instead of the GPU?
This might not be relevant, but the timeline bar flickers when I'm previewing a video.
Disk space is now:
80GB:    43GB free
500GB:   255GB free
2TB:       696GB free
1.5TB:    349GB free
I tried creating a project that didn't use the 1.5TB disk, but it exhibited the same problem.

Premiere Pro CS4 (Windows 7) will not (Capture or Record) connect with DV Cass Recorder

For 12 yrs I've Never had a problem w Adobe Prem Pro seeing my Panasonic AG-DV2000, DV cassette Recorder. Premiere Pro CS4 (with Windows 7 Ultimate) will not connect (Capture or Record)with my DV Cassette Recorder - Panasonic AG-DV2000. I upgraded my computer to below components & added Windows 7 at same time. Have had Adobe Prem Pro CS4 since fall with no problems. I usually have 2 - 5 videos, with 2 - 4 audios, going at same time on my timeline. (These digital videos & audios I shot myself professionally with mini DV cassettes.) Most projects are between 10 to 50 mins on timeline, w transitions or crossfades between video & audios. Firewire attached from computer to Panasonic. No Capture card in new system, not needed, use to watch over an external TV, now watch over a second monitor or in program monitor.    [Am I just missing a simple setting??]           Computer below & settings:   very up to date.
motherboard                        ASUS P6T
CPU                                         i 7    2.67 GHz
RAM                                       6 GB
video                                      ATI Radion HD 5700 1 gig Memory OpenGL 3.2
Main Drive                            500g SATA 7200 rpm
Raid Drive                              1.2 TB 7200 SATA
Windows 7                            64 Bit Ultimate
DVD/CD                                  writable Disc Drive
AVG                                        Antivirus 9.0
Playback Settings
                Realtime Playback
yes                                          Desktop Video Display
External Device                    DV 25 720X 576i
Aspect Ratio Conv              Hardware
yes                                          External Device Audio
                Export                     External Device                    DV 25 720X 576i
yes                                          Disable Video output when in background.
24p Conversion Method    - Interlaced frame 2:3:3:2
Preferences          (only things not set at default)
Audio Output Mapping       --   Premiere Pro WDM Sound (have also tried Audio Out)
Device Control     DV/HDV Device Cont Options: NTSC, Panasonic, AG-DV2000P, Auto Detect
                                (Check Status) Says it is ONLINE
Media                     Cache files saved to My Raid drive not C drive (so they will run faster)
                                Indeterminate Media Timebase:   29.97 fps Non Drop Frame
Project Settings Video -- Timecode             Audio -- Audio Samples
Capture Format (tried both) DV & HDV   (all settings checked for during preview & capture)
                Under DV               says Panasonic is Online, export to tape/it renders/Premiere controls the Panasonic recorder -looks like it's recording, but see no video -                                                 hear the sound. On Playback nothing was recorded? ( And Can't capture from tape to computer)
                Under HDV            Says Panasonic is Offline, but computer able to control the Panasonic start/stop, but doesn't record or capture tape to computer?
[ I think this DV/HDV part is correct...... it's getting very confusing at this point??!! Your help is appreciated Thank YOU ]

http://www.studio1productions.com/Articles/Firewire-1.htm
Above article HELPED me -- and is working fine!!
Was an Easy fix, took less than 2 mins.
After a 2 1/2 month ordeal.
Info from the "forum help group" through adobe. jk

Downloading High Def Mini DV through Macbook pro to external hard drive

Hi, I am making a 90min High def documentary with the hopes of selling it comercialy. I purchased a Sony hdr-hc7 and we shot 28 hours of footage with another 30 hrs to come. My plan is to rent a tape deck to download the DVM-63HD Mini DV Video Cassettes through my Macbook pro to an external hard drive.
My question is will I lose the High Def quality because I only have one firewire 400 input and will have to daisy chain the tape deck through the back of the external Hard drive. I asume that I'll need about 2000 gbs of external storage for the project, correct? Also, will my system be able to handle the editing, compresion and then creation of a master (maybe renting a Blue ray disc burner).
I have a macbook pro 15" with 1gb ddr2 sdram 667 mhz speed. There is a Bank 0 and a Bank 1 slot for ram that list have ing 1gb of ram (does this mean there are 2gb of ram?). Also, the firewire is 400mb/sec. Graphics card is an ATY,RadeonX1600. I'm using final cut pro 5.1.4. that I bought with finalcut studio pro.

Hi(Bonjour)!
If you use Apple Intermediate Codec to capture, you'll need 12 to 15 meg/second of space, that's an hefty 45 to 48 gig. for one hour. ( an external hard disk about 58 X 48 gig: 2784 gig ...)
As I read in FCS2 additionnal documentation regarding work in HDV and other formats, you can capture HDV natively (same hard drive space than regular mini DV), but you will need more processor power to display and scroll content than media captured with AIC.
Michel Boissonneault

Premiere Pro CS4 added contrast H.264 preview files

Hi,
Any help I can get with this problem would be amazing.
I recently updated my OS to 10.6 as there were programs I wanted to run not available on 10.5, however this caused other issues with Premiere that I couldn't fix so I just decided to go back to 10.5. With both installs I reformatted the hard-drive then installed the OS. Now that I've reinstalled OSX 10.5 and updated to the most current version, and then installed Premiere Pro CS4 and updated that to the most current version (4.2.1) and also updated the codecs for Premiere, I'm having an issue with my preview/render files in my timeline that I never had before. It appears that now when I render my original H.264 files the preview/render files have added contrast/crushed blacks and blown out highlights.
Basically I'm editing H.264 footage from a DSLR, and when I open up a project that I was working on before I began this upgrade mess it opens correctly, but if I extend a clip in my timeline to include part of the original clip that was not previously rendered, Premiere renders this clip with what appears to be increased gain and pedestal/increased contrast. I've also tried this in a new project and it still renders with much more contrast than it used to. Whether in a new project or previous project, Premiere seems to decrease pedestal so my blacks are around/below 7.5 IRE and my whites are at/above 100 IRE. it looks really messed up when this occurs in the middle of a clip that was half rendered before and half after the install. Also I'll bet it's not going to help when it comes to color correcting and it looks like I could be losing image data.
I don't know what has caused this as it was working properly before my attempted upgrade, and I installed Premiere the exact same way as I did the last time I installed it and I'm using the same version. The only hiccup was after the install and upgrade it said media offline on my old project until it asked me to update codecs, once codecs were updated it displayed all footage in my timeline correctly and then I noticed that I could no longer render preview files to the same standard.
Here are screen shot comparisons of a video from my timeline. These are back to back frames, the top one was rendered before the most recent install, the other rendered after. I have put a YC Waveform chart beside the image. Sorry I think the best way to see it is just to follow the link otherwise it's gonna be too small.
http://www.flickr.com/photos/86776146@N03/8101475154/sizes/l/in/photostream/
Also here is a screenshot of the settings I'll describe below.
http://www.flickr.com/photos/86776146@N03/8101463115/sizes/l/in/photostream/
Computer:
Mac OSX 10.5.8
Intel Core Duo
Premiere Pro CS4 (4.2.1)
Project Settings:
HDV 720p
29.97 fps
1280 x 720
square pixels
30fps drop-code
I-Frame Only MPEG (video codec)
I've already searched for a solution to this but come up with nothing. I read a bunch of stuff on the increase in gamma that can happen with .mov files but I don't think this applies to my situation as I would have been having that same issue with my previously rendered footage.
Anything would be really helpful...Thanks
Message was edited by: Mike542

Okay so I've been looking into this in depth over the past few days and I haven't come up with a lot. I have noticed that it's not just the render files but also the inspection window where the clip displays in this manner. It looks like the luma range (as seen in YCbCr scope) is being limited between 7.5 and 92 IRE and I think this is maybe a good indicator of the problem. Why this is happening I don't understand. On my clips that were previously rendered in this timeline there is full range from 0 to 100 in the luma from the YCbCr scope. These files were rendered to an external drive from before I reinstalled Premiere, so it's any h.264 files that I am using after reinstall that are having this issue. I have attached another screen capture illustrating this (look at line to right of scope showing full luma range). Also I have some .mts files from another camera and they import with full luma range as well.
http://www.flickr.com/photos/86776146@N03/8114886495/sizes/l/in/photostream/
When playing my h.264 files in Quicktime or VLC they look about the same in terms of blown out whites and crushed blacks. Does Premiere rely on Quicktime for its h.264 codec or does it have it's own? Is there a way to force premiere to update its codecs/manually download and replace the h.264 codec?
I really can't understand what's happening here and I can't do any work when imported clips are this messed up. Can someone please help out on this!!! Super frustrating and seems to constantly happen with Premiere...

Preview While Capturing High Def in Pro CS4?

Similar Messages

Maybe you are looking for