Preview window in Build Inspector stopped working

I installed Keynote '09 this morning to finish an iPad presentation. I've worked all day and am nearly finished, when suddenly, the preview window in the Build inspector stopped working. Now, it is not showing any of my changes and none of my new actions work properly. What did I do? How do I fix this. I am on a deadline!!!!
Using a Mac Desktop at work with OSX 10.5.8.

Well, I just seemed to have solved the problem...at least as I was experiencing it. As mentioned, I have my Motion content on an external drive, so I decided to revisit this.
I had installed all my Final Cut Studio content on the external drive using the "Content Installer" (after first installing the apps to my laptop). When opening Motion for the first time, it couldn't find the content so I manually typed in the appropriate path...or so I thought:
250GB Drive : Final Cut Studio Content : Motion Content.
Oddly enough, a few things worked this way, but not everything. It turns out I had to specifically point one folder deeper:
250GB Drive : Final Cut Studio Content : Motion Content : Motion
After doing this, all my content seems to preview, although there still are a few anomalies. Some things have to be clicked on more than once to preview, or sometimes I must preview something else first, then try the desired effect a second time. In some cases waiting quite a while produces something.
I'll try moving the cursor about as Mabou suggested and see if that makes any difference.
At least I'm getting somewhere!
Thanks,
Doug

Similar Messages

I recently tried to upgrade my itunes on my dell laptop with 64bit Windows 7 and it stopped working completely. So I tried deleting and installing all over again and haven't been able to reinstall it since. I've tried numerous things i've read in forums

I recently tried to upgrade my itunes on my dell laptop with 64 bit windows 7. It stopped working so I deleted all files and tried to reinstall and haven't been able to since. I've tried numerous things i've read in forums and nothing seems to work. The installation will not move past the "publishing product information" point. After being stuck there for a while this error message appears:
An error occurred during the installation of assembly 'Microsoft.VC80.CRT,version="8.0.50727.4053",type="win32",publicKeyToken="1fc8b 3b9a1e18e3b",process or Architecture="x86"', Please refer to Help and Support for more information. HRESULT: 0x800736FD
I hope someone is able to help me with this.

Did you already try what bnoir suggested in this post about error 0x800736FD:
These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? Are they also 800736FD, or some other number? (If they're another number, what number are you getting?
This thread might help as well, suggestion provided by bnoir:
In general, these ones tend to be caused by underlying problems on the PC that can prevent Windows Updates from installing. So my main strategy with them is to try to fix the Windows Update issues. If we can get Windows Updates flowing again, that generally clears up the iTunes install errors +en passant.+
Head into your Windows Update, and check for any new updates. Do any fail? If so, open your Update History and doubleclick on the failure entries to bring up a small box with alphanumeric error message codes. Are you getting 8000FFFFs? (They often seem to be associated with an iTunes-install 0x800736FD.)
If you're getting 8000FFFFs, try the following Microsoft document:
[Windows Update Error 8000FFFF|http://windows.microsoft.com/en-US/windows-vista/Windows-Update-Error- 8000FFFF]
Head back to Windows Update, and stock up on any updates you're behind on. Once you're completely up to date in that regard, try another iTunes install. Does it go through properly this time?
Message was edited by: Ingo2711

TS1717 iTunes 11 and Windows 7 (32 bit). iTunes crashes frequently (Windows message : "iTunes has stopped working and will be closed").

iTunes 11.0.1.12 and Windows 7 (32 bit, latest version). iTunes crashes frequently (Windows message : "iTunes has stopped working and will be closed"). I may be trying to search for an App. or book (or anything else), trying to access iTunes store, checking for updates to Apps., inputting my password, etc. etc. I have uninstalled iTunes several times, reinstalled several times, but the error persists. I tried the iTunes 10 suggested fix of running in safe mode, but iTunes again crashed when I was trying to create a new ID.
Any real help would be gratefully received. Thank you.

Still having this issue

The inspector stopped working after update

The inspector stopped working after an update. When I click on the inspector button it says "An unexpected error has occured. Please quit and reopen Keynote." Quitting and reopening Keynote does not fix the problem. Inspector does not work in Pages either (it doesn't do anything when I click on it), but it does work in Numbers. I also am having problems opening files created in Numbers before the update.

Hi jeau300!
Here is an article that can give you some tips about using your computer with your external monitor in closed clamshell mode:
Mac notebooks: How to use your computer in closed clamshell (display closed) mode with an external display
http://support.apple.com/kb/ht3131
How to disconnect your Mac notebook from the display after use:
For best results it is recommend that you put your computer to sleep before disconnecting your display.
Note: Some DVI and Mini DisplayPort displays—including Apple's aluminum-framed DVI displays and the 24-inch and 27-inch LED Cinema Displays—can be unplugged without putting the computer to sleep. If you aren't sure whether your display supports this feature, put your computer to sleep before unplugging the display.
Take care, and thanks for visiting the Apple Support Communities.
Cheers,
Braden

I definitely have put this under the wrong catergory but i don't care, I was wondering why everytime i click on a video to play it says: Windows media player has stopped working

Ok, so I made a video with Bandicam, and every time I click on it to play it (it is saved as an MP4), it just says: Windows Media Player has stopped working. Then it gives me two choices: Close the program OR look online for a solution. I REALLY want to
post these videos, but I can't. If anyone could help that would be great!

Hi juderocks14,
Please first take a check with the other Players and see if they could play the MP4 file normally. If it can't be played, which means it might be corrupted. You may ask at the Bandicam side, or save the files again.
If issue insists, take a try with the Troubleshooter (For Windows 7, 8 and 8.1):
Open the Windows Media Player Settings troubleshooter
Fix Windows Media Player video, and other media or library issues
Or you may try to turn Windows Features on or off to reset Windows Media Player:
Turn Windows features on or off (Before turn it on again, please remember to reboot first)
More reference:
What happens if I turn off Windows Media Player?
Best regards
Michael Shao
TechNet Community Support

When I connect my Ipad to my Windows (7) computer iTunes stops working.

When I connect my Ipad to my Windows (7) computer iTunes stops working and it dir not sync.With the same connection my iPhone connect properly.

Having the same problem. Did you find a solution?

ITunes Match sync stops and gives me a Window error that it stop working. I have Windows 7 64bit. How do it make it sync?

I have signed up on iTunes Match. When I setup my PC iTunes to starts to sync it stop and gives me a Window error that it stop working. I have Windows 7 64bit. How do it make it sync?

Tarantulaman wrote:
i do, but like i said it fell once and since then it hasn't been able to connect to my laptop. it acts like nothing's connected. i believe if i call the company the HDD is from they'll be able to transfer it to a new one but who knows how much they'd charge. looks like i have no choice now.
If it were truly a backup, then the media would play on the laptop as it would be on the laptop.
Sounds like you actually do not have a backup, instead you chose to keep your media on an external drive.
Regardless of where the media is stored, it's always a good idea to have a backup for instances like this.

Thinkvantage "access connections windows wireless service" has stopped working

My new computer is a T400 running Windows 7 (lenovo disk installed after purchase) .
While it still connects to the internet through the Windows(?) "open network and sharing center the Thinkvantage Technologies "access connections windows wireless service" has stopped working. It worked fine for a while (4-6 weeks).
Any ideas on how to get it started again?
Thanks
John

Thank you for your reply. I'm just not sure what "it" to uninstall or where to get the new "it" to download. Would you mind adding those details for me? I appreciate your help
John

Windows desktop gadgets has stopped working

As of a few days ago my desktop gadgets have stopped working. When I start Windows they appear to function normally for a minute or so then the error message "Windows desktop gadgets has stopped working" appears. Sometimes there is a second attmept to launch the gadgets but it fails in the same manner.
Worryingly for the general robustness of Windows 7, performing a System Restore to a time before the problem arose did NOT fix the problem.

I have found this solution and worked perfectly for me, you might want to try it out!
I own no credit over this!
Thanks to " Ramesh Srinivasan "
Is your Windows Sidebar (Windows Desktop Gadgets) crashing after adding a third-party gadget, with the error "Windows Desktop Gadgets has stopped working" or "Windows
Sidebar has stopped working" (Windows Vista) at every start? You can stop the offending gadget from loading by editing the Windows Sidebar Gadgets settings file. Here are the instructions, which apply to Windows 7 and Windows Vista.
If Sidebar.exe process is running, you wouldn’t be able to write to its settings file. Launch Task Manager (taskmgr.exe), select the sidebar.exe process and terminate it if it’s running.
Click Start, type the following path in the Search box and hit ENTER.
%LOCALAPPDATA%\Microsoft\Windows Sidebar
(You can type it in the Run dialog as well.)
The above location is where the desktop gadgets store their configuration information, in a file named Settings.ini
First, make a copy of Settings.ini
Double-click Settings.ini to open it in Notepad.
Configuration information for the last installed desktop gadget is usually located at the end of the INI file. Using the PrivateSetting_GadgetName line as the hint, locate the corresponding [Section #], select all lines underneath
and delete it. Trim any blank lines that may have resulted from the deletion.
Then, move to the top of the INI file, and delete the Section# line that references the offending gadget. As you’ve removed the entries in [Section 5], also delete the following line:
Section4="5"
Trim any blank lines that may have resulted from the deletion, and save the Settings.ini file.
Right-click on the Desktop, and click Gadgets. This starts the Sidebar.exe process and shows the gadgets listed in the Settings.ini file.

After installing 10 .5.1 and buying itunes match I click add this computer and I get a window saying itunes has stopped working and itunes closes

after installing 10 .5.1 and buying itunes match I click add this computer and I get a window saying itunes has stopped working and itunes closes

I found that after I turned on geniuseverything worked

Starts to load homepage, then Windows message: "Firefox has stopped working" All this after a Firefox update

Directly after an update, Firefox will no longer start. It begins to load my homepage, then fades away with the Windows message "Firefox has stopped working"
Looking at Norton security history, I see it blocked plugin-container.exe about the time the update was being downloaded.

I don't know if this is exactly the same problem, but here's what happened to me:
One day when I opened Firefox I got a prompt for updates. I got upgraded to version 3.6.16. That was over a week ago. This morning, I opened Firefox, got a prompt for updates, clicked ok, and I ended up upgrading again to 3.6.16. Norton gave me a notification about some file being used by fewer than 100 people and having "medium risk", but I wasn't able to take any action, just read.
Once that upgrade went through every time I tried to open Firefox, it'd pop up, I'd click no to "Do you want Firefox to be your default browser" and then it'd go white and freeze up. I'd get a message from Windows that there's a problem, Firefox has stopped working, it will be closed. No information was sent regarding the problem.
When I'd open Firefox I'd see two tabs: one about the upgrade to 3.16.6 along with an invitation to upgrade to version 4, and another being my homepage to yahoo.com.
I also have Internet Explorer, so I opened that, went to Firefox's website and downloaded version 4. So far that has taken care of the problem~I can use Firefox again.
However, I did have a couple small difficulties while downloading version 4. Right off it would not immediately start running. That was blocked by my Norton. So I had to click on "click here". Also during the process I got a message about two add-ons being incompatible, so they were disabled, and no updates could be found. They were: Microsoft .NET Framework Assistant 1.2.1. and Norton Toolbar 4.6.
I worried it was a virus but it seems like more of a compatibility problem involving maybe Norton? I have the 2010 version and haven't upgraded to Norton 2011 yet.
Anyway, like I said, so far version 4 is working fine, but I thought I'd pass on the incident.

[Ubuntu, Windows 8.1] Touchscreen stopped working.

Hello!
From about 1 year I'm lucky owner of Lenovo Idea Pad Flex 15 Laptop. I love it!
Today touchscreen of laptop stopped working after reboot from Ubuntu 14.04 to Windows 8.1. On both system screen is detected but, there is no input. I tried to turn off usb power saving on Win 8.1 and reinstalling all HIDs, without any success. On Ubuntu I tried to calibrate screen - still no luck. If applicable there is dmseg output:
dmesg | grep eGalax
[ 3.443718] usb 2-1: Product: eGalaxTouch EXC7910-1026-13.00.00
[ 3.443720] usb 2-1: Manufacturer: eGalax Inc.
[ 27.549122] input: eGalax Inc. eGalaxTouch EXC7910-1026-13.00.00 as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.0/input/input7
[ 27.549752] hid-multitouch 0003:0EEF:A111.0001: input,hiddev0,hidraw0: USB HID v2.10 Device [eGalax Inc. eGalaxTouch EXC7910-1026-13.00.00] on usb-0000:00:14.0-1/input0
So, how to make screen working again?
Cheers, Damian Herman

Hi，
A VPN 720 Error can occur if your server's VPN configuration doesn't point to a valid DHCP server on its network. The result is your client can't connect since it doesn't have a valid IP address to use.
On the VPN Server, go to "Routing and Remote Access" under "Administrative Tools" and go to the "DHCP Relay Agent" configuration. Check the DHCP server IP addresses that are listed for correctness
Regarding to restore point as mentioned in the post, do you have a anti-virus software installed? if you have, I suggest you temporarily disable it, then try restore point again.
For that specific update KB2920189, any error messages prompted when you uninstall it, you can also check the cbs log (Windows\logs\cbs), for detailed information.
Yolanda Zhu
TechNet Community Support

Windows 7 Home Premium stops working with ADobe Create PDF

Windows 7 home premium after a year of working fine, today stopped working with create PDF printer. I print to the PDF printer, looks normal, but no file appears in my files of PDFs created on line. My laptop running Windows 7 Professional has had no such problem. Please advise.

Windows 7 home premium after a year of working fine, today stopped working with create PDF printer. I print to the PDF printer, looks normal, but no file appears in my files of PDFs created on line. My laptop running Windows 7 Professional has had no such problem. Please advise.

Windows 7 - 'iTunes Has Stopped Working' Window Repeatedly Popping Up

Hi there, I've encountered a problem that I couldn't fix myself so I'm hoping someone can impart with some knowledge.
The dreaded 'iTunes has stopped working' window pops up constantly, and continues to reappear again and again. Even navigating to this forum, finding the right place to post and typing this very question is a pain as it has popped up about 7 times since I started typing it. If I leave my laptop alone for a few minutes, I come back and there's about 15 windows open saying the same thing. This is super annoying as I'm trying to get some work done, but any ounce of productivity I have is stifled by this. I am very close to headbutting the screen before I throw my laptop into oncoming traffic on the street below.
I've tried restarting the system, shutting it down and leaving it off for a bit, ending any iTunes-related processes in Task Manager but all have failed.
I'm using Windows 7 Home Premium 64-bit SP1
HP Pavilion G6
4GB RAM
Any help will be greatly appreciated, thanks.

Hi there 46Villan,
I understand that you are seeing an issue with iTunes for Windows and you are getting a recurring error message on your computer. I understand how this would be frustrating to you and would stifle productivity. In order to help you troubleshoot this issue, I suggest that you perform the steps found in the following article:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues - Apple Support
http://support.apple.com/en-us/HT203206
If the issue continues after attempting those steps, you may need to consider uninstalling then reinstalling iTunes and its related components completely:
Remove and Reinstall iTunes and other software components from Windows XP - Apple Support
http://support.apple.com/en-us/ht1925
Thanks for coming to the Apple Support Communities!
Cheers,
Braden

Windows Message 'iTunes has stopped working' and fails to sync my iPhone

Ive synced my iPhone so many times, but now its decided it doesnt want to co-operate. I dont have that much knowledge of iPhones when they go wrong.. So heres what happens and what I need help with..
I connect my iPhone to iTunes and it starts syncing and backing up my iPhone and when it gets to loading songs it gets to about the second song and a windows message pops up and says
iTunes has stopped working
Windows can check online for a solition to the problem (i have clicked this and nothing happens)
and it also just tells me to close the program
Its beyond frustrating now, its happened about 10 times
I also downloaded the latest version of iTunes but that hasnt helped...
Help!

Maybe you should try to re-install iTunes cleanly as described below:
http://support.apple.com/kb/HT1925
Hope this helps!

Preview window in Build Inspector stopped working

Similar Messages

Maybe you are looking for