Preview window in premiere 10 will not show view video images

My Premiere 10 preview window will not show video images. There has been some on-line discussion that nVidia GeForce video card automatic updates is the problem and it has been suggested that I roll back to a previous card however the rollback button does not light up and can not be activated. Also I'm not sure that I'm using the correct settings for the preview window, what are the default settings?

I recommend that you try your question in premeire forum, so you have a better chance of getting an answer.
http://forums.adobe.com/community/premiere_elements - premeire elements
http://forums.adobe.com/community/premiere - premeire pro

Similar Messages

  • Upgraded to 7.0.2 and now iTunes will not show a video horizontally

    I have an iphone 4s.  Since upgrading to 7.0.2, itunes will now show a video horizontally.  The portrait view is also much smaller.  I tried changing settings, but I haven't found how to fix this.

    Now iTunes won't open. It doesn't give me any error messages it just won't open the window.
    some preliminary questions aimed at narrowing in on possible culprits.
    (1) do you have Norton Internet Security 2005 installed on the PC?
    (2) try launching your QuickTime. does it:
    (a) launch perfectly fine?
    (b) fail to launch with an error message? (if so, what does it say?)
    (c) exhibit other peculiar behavior? (if so, could you describe it for us?)
    (3) reboot the PC. bring up your Task Manager, and click on the "Processes" tab. now try to launch itunes again.
    does an "itunes.exe" process appear in the Processes tab? if so, does it persist in there or does it disappear after a few seconds?

  • ATV2 - Will not show any video w/o reboot

    I have 2 Apple TV devices (both are 2nd generation).
    One of them is fine.  But the other one will not show a signal after about a day of no use. I have to unplug the power, then plug it back in to get a signal out of it.
    The other day, I watched the LED light as I was trying to turn it on. It just flashes when I press the power button on the remote, so it is indeed getting my remote commands. After I try to turn it on about 5-7 times, the LED stays lit. But the TV still says "no signal".  If I unplug it from the power, then plug it back in, only then it comes back up and seems to work ok.  But if we don't use it again for about a day, when we come back to it.. we get the same thing and it needs to be unplugged again and plugged back in (power).
    I tried to reset to factory settings, but that didn't help.
    This started happening after the 4.2 update (I think that was about 3 updates ago).
    Any ideas I can try?
    Thanks in advance.

    Hi
    As I see this I mostly suspect one of three reasons
    • iMovie Event's and or iMovie Project's folders have/has been moved/altered on DeskTop/Finder - DON'T - but try to move everything back exactly where it was
    • iMovie pref. file got corrupted (very easily done by e.g. Panic/Force halt's) - trash it when iMovie is NOT running
    • Material used in Movie Project is located on device not accessibly any longer. E.g. one used audio from Audio-CD then ejected the CD. iMovie (Project's) Don't do ANY copy of the used material - only point's to where it found it and if external hard disks, Audio-CDs etc are disconnected then the iMovie Project get's lost and it has no function to try to find it (at all).
    Yours thinking - bengt W

  • The capture window in Premiere Pro does not show video feed from Beta SP

    Dear Sirs
    The capture window in Premiere PRO CC with blackmagic 4k extreme (Desktop Video 10.1 for Windows) does not show a live video feed in, from analog beta sp, It works only in media express.
    Can you help us?
    Thanks
    Alessandro

    Starting from a fresh new win7 installation, all problems solved
    Bye
    Alessandro

  • Windows Vista Boot camp will not show video card

    Hello
    Im running a macbook pro in windows vista 32 bit boot camp mode. Every thing works fine except that the device manager only shows the VGA adapter and not the Nvidia Geforce 8600M GT I have equiped. I cant find any drivers for this card. Is there any way to get Vista to use it properly?
    Thanks

    This forum is for troubleshooting issues related to the usage of Mac OS X, not Boot Camp or Windows. Post your question in the Boot Camp forums:
    http://discussions.apple.com/category.jspa?categoryID=237

  • After reinstalling Windows 8.1 64bit Pro Firefox will not show a video in HTML5, only in Flash Player.

    This worked before i reinstalled my operating system. I am on the same website it worked on and now the videos will only play in Flash Player...
    I have asked the website developer if he has changed something with the player, but nothing has been changed.
    I have also reset my firefox, but nothing worked.
    My firefox version is 34.0.5, and i have provided screenshots below. Can some of the plugins i use have something to do with this?
    Please reply if you need more information about this.
    Thanks.
    - Jonas Schirmer

    * 1
    Make sure that all the plugins you want / need are installed and up to date.
    * 2
    Type '''about:addons'''<enter> in the address bar to open the '''Add-ons Manager.'''
    Hot key; '''<Control>''(Mac:<Command>)'' <Shift> A)'''
    On the left side of the page, select '''Plugins.'''
    Make sure the ones you want to use are set to '''Ask''' or '''Allow.'''
    * 3
    Go to the web page. Once the page is loading, mouse to the address bar
    and '''Left''' click the icon. A window for displaying site information should
    come up. Select '''More Information.''' Now select '''Permissions.''' In the
    menu, Make sure the ones you want to use are set to '''Ask''' or '''Allow.'''

  • My HP webcam HD3110/3110 will not show my video with Skype. I have a new computer with Windows 8

    My webcam is 4 months old and my computer is brand new.

    What's your computer model?
    What have you tried till now?
    Can you see your webcam in the device manger?
    Do you have the right driver (win8)?
    *** Say 'Thanks' with Kudos ***

  • Premiere Pro will not import a video I captured in Premiere.

    I am working with Premiere Pro Cs6, on an HP laptop, with Windows 8. This is the first time I was capturing video from a Canon XL H1. When I finished capturing, Premiere did not give me any further prompts, and when I preceded to try to import the video I captured, it is telling me that "there was an error decompressing audio or video." I need to finish this job by the end of the week, so any help would be appreciated. Thank you!

    Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
    http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
    Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download

  • My event library will not show any video clips

    When I highlight any event in my event library the message comes up 'no video clips match the current selection'.
    I have tried changing to all clips and favourites or unmarked.

    Hi
    As I see this I mostly suspect one of three reasons
    • iMovie Event's and or iMovie Project's folders have/has been moved/altered on DeskTop/Finder - DON'T - but try to move everything back exactly where it was
    • iMovie pref. file got corrupted (very easily done by e.g. Panic/Force halt's) - trash it when iMovie is NOT running
    • Material used in Movie Project is located on device not accessibly any longer. E.g. one used audio from Audio-CD then ejected the CD. iMovie (Project's) Don't do ANY copy of the used material - only point's to where it found it and if external hard disks, Audio-CDs etc are disconnected then the iMovie Project get's lost and it has no function to try to find it (at all).
    Yours thinking - bengt W

  • IMovie will not show the video playing during editing

    Does anyone know the maximum size of the total clips, still photos and transitions for iMovie? I suspect that may be why when I am trying to edit the iMovie project I hit the space bar to play and only the sound plays. The video does not move.

    Hi
    A. How much free space is there on Your - Start-Up (Macintosh HD) Hard disk ?
    The movie in Your Camera / Stored on Your Mac (from Camera) - is very Compressed.
    For iMovie (or FinalCut) it has to be in an Editable format - and this is massively LARGER
    I've movies on 500Mb when un-folder are 50Gb or even more.
    B. Is there other external Hard Disks connected ?
    How are it / they formatted - HAS TO BE - Mac OS Extended (hfs) to work for VIDEO
    UNIX / DOS / FAT32 / Mac OS Exchange - Works for most other things but not for VIDEO
    Yours Bengt W

  • Premiere CS5 will not render video with titles on the fly in preview window

    I am trying to use CS5 and notice if I add a title to the timeline overlapping any video and then attempt to play the video as soon as it hits the part with the title the video stops playing in the preview window. The background sound keeps going but video play back stops. In premiere CS4 it would render titles on the fly no problem. Why wont it do it in CS5? I should not have to render the timeline it should do at least a rough realtime playback without a full render. In CS4 it would play any and all effects on the fly depending on the resolution and the performence would vary depending on how many and what effects and transitions were applied to the clips but its very useful to get a quick idea how it will look. If I scrub, the titles playback while scrubbing no problem its only with actual playback it happens. Other effects and transitions I apply seem to render on the fly and play back in the preview window ok, it only seems to be the titles having the issues.
    Any ideas?

    Version = 5.0
    Language = english
    Latest updates = applied
    Issue happens regardless of sequence settings
    Windows 7 64 bit
    latest updates
    english
    1650x900 , 32 bit color
    Intel core 2 duo 3ghz cpu
    8 gig ram
    Nvidia 9600 gt with latest drivers
    multiple monitor setup
    Audigy 2 platinum pro sound card from creative , latest drivers
    3 hard drives,  drive 1 = 1TB with 747gb free, drive 2= 1TB with 750 gb free, drive 3 = 200gb drive with 75 gig free
    Usualy capture video from a canon HV30 using Cineform Neoscene capture software, this is 1440x1080 HD 24p clips. (issue with the titles happens on any imported video in any format though, even with no clips but on a matt background)
    Cineform Neoscene capture software version 5 latest version
    Only using stock premiere plugins
    No error message
    I want to use the built in premiere title function to place titles along with fades and what not and then play back clips in the preview windows with the titles applied rendering on the fly. This works perfectly in CS4, just not in CS5. When I try it in CS5 after you hit the play button it will play the clip but as soon as you get to the part of the clip where the title is the video playback will freeze, mind you the clip is still playing in the sense that audio is still going just the video playback stops in the preview window. As a note if you scrub the video on the timeline the video clips will display with the titles applied it should, it is only when you hit the play button the problem happens.
    I have tried adjusing the quality settings in the preview window, updated my gfx card drivers and system drivers along with directx. Premiere is updated. I have tested other effects and transitions and they display fine, including super imposures such as chroma key or ultra key. I have adjust playback settings not that there was much to adjust there.
    I will say again in CS4 never had this issue, I am surprised to see it here.
    Please any ideas would be appriciated thx.

  • Video will not show in the preview window

    I am using iMovie 08 and have some video that I pulled into iMovie using my iSight. Whenever I am trying to preview my movie it will not show in the preview window. I did a software update for iMovie and the issue is still happening. Any ideas??

    Although the same not preview-able iMovie event played perfectly fine when transferred to a different mac running perian and divx, disabling Perian solved the issue on my macbook, too!
    Thanks for the tip!
    I still wonder why some clips preview and some don't (with perian running)...

  • I would like to use time Machine to back up to a network SMB drive. I can see the drive on my desktop but it will not show in the time machine window to be able to select it

    I currently have a mini server (OSX10.8.5, server 2.2.2) that I am using Time Machine to back up 4 external drives that are connected to the server via firewire 800. I would like to use Time Machine to back up to a windows network SMB drive. I can see the drive on my desktop but it will not show in the time machine window to be able to select it for use.
    Can this be done
    Thanks for any and all help

    The supported targets for Time Machine backups are local (direct-connected) disks, and network targets include Time Capsule, a disk hanging off the current-generation AirPort (though not earlier AirPort devices), and OS X Server systems.
    The Time Machine storage is based on the HFS+ file system, so I would not expect TM to work with SMB file services.
    While there are hacks to allow Time Machine to access network drives, I would not consider those to be reliable. Skim the forum and the 'net for related details, and for previous discussions of setting this up and the related issues that can arise.
    Remember to test the recovery with whatever you decide to use; whole point of backups is the ability to restore the data, after all.
    If you want to learn more about Time Machine, Pondini is an excellent resource.

  • IPod Touch will not show up in Windows XP after iTunes 10.2.1 update

    After updating iTunes to 10.2.1 my 4G Touch will not show up in Windows XP to charge or to sync. I have been reading this forum and following the multiple Apple help and troubleshooting steps with no luck. I can get Windows to recognize and charge the Touch as a camera but it will not update the driver for Apple Mobile Device. I have come to the conclusion it is an Apple software problem. Does anyone know where I can get the previous Apple Mobile Device driver for Windows XP? I would like to give that a try. It's really disappointing....

    Upon uninstalling and re-installing all of the Apple software nothing has changed. I can see Apple Mobile Device Support in add/remove programs but when clicking on "repair" it cannot finish and says it encountered a fatal error and no changes have been made.
    The error I get trying to install the driver in Device Manager says "I/O operation has been aborted because of either a thread exit or an application request".
    Does anyone have any suggestions?

  • My iPod Touch is showing up as a digital camera in Windows, and it will not show up in iTunes. What's wrong and how can I fix it?

    I have an iPod Touch and when I plug it into my computer, it shows up as a digital camera. Then, it will not show up in iTunes at all. (I have Windows.)

    Start here:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

Maybe you are looking for