Preview window not accurate - Adobe Photoshop CS3

Alright, I'm using the Adobe Photoshop CS3 trial on a Windows Vista machine - I've been using it for a couple days and I've noticed a number of times that the image in the preview window doesn't match what I get (usually after using image adjustment tools like Layer, Contrast/Brightness, or Curves - haven't noticed it so much with Filters, but haven't been using those as much yet either).
Anyone noticed this? Anything I can do to correct it? It's pretty frustrating! I'll make a bunch of movements on a curves window to get everything where I want it, and then when I hit OK, the original image doesn't change the way it's supposed to.
Thanks!

Look at the image at 100%. Only then you see an accurate representation.
Rob

Similar Messages

I have switched from PC to Mac how do i use my windows version of adobe photoshop CS3 on my MAC?

i have switched from PC to Mac how do i use my windows version of adobe photoshop CS3 on my MAC?

rebel1568,
All Photoshop versions through CS6 came with platform-specific licenses, either Windows or PC. You could get a cross-grade of platform swap at a nominal cost but not for older versions, only for whatever Photoshop versions was current at the time.
CS3 is totally out of the upgrade or cross-grade loop. You'd have to buy a new license for CS6 Mac or subscribe to Photoshop CC, as Trevor points out.
Curt Y is correct in that CS2 will not run on current Mac-Intel machines. You would need a used Mac G5 or G4 with a PowerPC (IBM) CPU, which have been obsolete since mid 2006.
Of course, you could run your Windows on your Mac if you installed and ran BootCamp or Parallells.

Adobe Photoshop CS3 Will Not Install PLEASE HELP TRIED EVERYTHING

I downloaded from Adobe the Photoshop CS3 Extended Trial directly from Adobe. (BTW I am on Vista 32)
The first time I tried installing, ADBEPHSPCS3_WWE.exe successfully unpacked, I successfully transitioned to the Adobe Photoshop CS3 installation, and it appeared to install. After 30 minutes or so, the installer finished and simply said that shared components had installed but the Photoshop CS3 Component install failed.
I always got in the log Error 1935.An error occurred during the installation of assembly 'Microsoft.VC80.MFCLOC,version="8.0.50727.163",type="win32",publicKeyToken="1fc8b3b9a1e18 e3b",processorArchitecture="x86"'. Please refer to Help and Support for more information
This, I know, is everyones typical problem.
I turned off firewall and antivirus.
I uninstalled ALL Adobe and Macromedia programs, including Flash and Acrobat.
I used Windows Install Cleanup Utility to remove them.
I downloaded the CS3 Clear from Adobe and cleared at levels 1, 2, and 3.
I created the Administrator account on my computer and tried everything on the Administrator account.
I tried installing Photoshop CS3 with compatibility mode for XP SP2.
I tried:
1. Open an Administrator command prompt by right clicking on Start -> All
Programs -> Accessories -> Command Prompt and selecting "Run as
Administrator" and clicking "Allow" for the elevation prompt
2. In the command prompt, type the command below
fsutil resource setautoreset true C:\
3. Reboot the machine
I tried:
Get command prompt up. It has to be run with admin rights so save yourself some time and run it this way.........Start/programs/accessories/.....right click command prompt and click run as administrator.
Then paste these commands in 1 after the other
regsvr32 vbscript.dll (THEN PRESS ENTER)
and
regsvr32 jscript.dll (AGAIN PRESS ENTER)
I even tried installing in Safe Mode but the CS3 setup would not initialize.
I do not know what else to do. I have CS2 which I will use, but I was really hoping to move to CS3 which is supposed to be better and faster. Does anyone know anything else to do? I am not a computer noob but I am not about to reinstall Vista. If anyone has any suggestions they would be greatly appreciated.

I was in the same predicament and after spend many hours over several days trying a multitude of things I finally found an easy fix (below):
========================================
Assuming you have Internet Explorer 7 go to:
Tools/Internet option/Advanced
Click the Reset dialog box. This will bring IE7 back to its default settings. You should reboot your computer. After logging back into Windows load IE and let it take you though its initial setup. When you are done close IE and install Photoshop.. This worked for me,,, hopefully it will work for you!

Adobe Photoshop CS3 Extended freezes on startup under Windows 7 Ultimate 64-bit - No splash screen

I installed my licensed copy of Adobe Photoshop CS3 Extended today as part of my install a bunch of software after a reinstall of Windows (due to viruses). I did a completely fresh install of Windows 7 Ultimate 64-bit. I've used Photoshop CS3 Extended for quite a while now so I know what to expect on startup but it was previously installed under Windows XP Professional (32-bit). Figured I would give Windows 7 a chance this time around.
Google searches aren't turning up anything. When I attempt to start the application, I get a window with the title "Adobe Photoshop CS3" (no "Extended" - I seem to recall the title changes later) and the toolbar appears. However, no splash screen appears and no Product Activation wizard appears - the application simply freezes on an empty frame and a toolbar. I've tried running Photoshop as Administrator (right-click, "Run As Administrator"), but nothing changed there. I tried uninstalling and reinstalling. I tried upgrading to CS3 10.0.1. Nothing works. The application simply freezes before it gets anywhere.
I tried calling Adobe Support since this technically falls under installation issues but their phone support systems are down today. Go figure.
Edit: I hooked into Photoshop with the Visual Studio debugger and every single thread is executing some variation of WaitForSingleObject() or WaitForMultipleObjects(). The main thread is "executing" somewhere in AdobeLM_libFNP.dll (at address 09619d81 - if I had debugging symbols for CS3, I could provide a function). There are nine threads "running" at the point the freeze occurs - but all of them are technically suspended due to the functions they are executing - and one thread is in a suspended state.

Log Name:      Application
Source:        Application Hang
Date:          7/17/2010 6:16:25 PM
Event ID:      1002
Task Category: (101)
Level:         Error
Keywords:      Classic
User:          N/A
Description:
The program Photoshop.exe version 10.0.1.0 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel.
Process ID: d0c
Start Time: 01cb2616be79e36f
Termination Time: 2
Application Path: C:\Program Files (x86)\Adobe\Adobe Photoshop CS3\Photoshop.exe
Report Id: 06f5fbff-920a-11df-9d69-001fd023417e
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Application Hang" />
    <EventID Qualifiers="0">1002</EventID>
    <Level>2</Level>
    <Task>101</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2010-07-18T01:16:25.000000000Z" />
    <EventRecordID>1615</EventRecordID>
    <Channel>Application</Channel>
    <Security />
</System>
<EventData>
    <Data>Photoshop.exe</Data>
    <Data>10.0.1.0</Data>
    <Data>d0c</Data>
    <Data>01cb2616be79e36f</Data>
    <Data>2</Data>
    <Data>C:\Program Files (x86)\Adobe\Adobe Photoshop CS3\Photoshop.exe</Data>
    <Data>06f5fbff-920a-11df-9d69-001fd023417e</Data>
    <Binary>430072006F00730073002D0074006800720065006100640000000000</Binary>
</EventData>
</Event>
And, according to the Event Viewer, the "Binary" data translates to a zero-terminated Unicode string of "Cross-thread".
My Visual Studio analysis was far more informative. All threads are hung inside of WaitForSingleObject() and WaitForMultipleObjects() calls and the DLL in question appears to be FlexNet-related. I did forget to mention that I also even manually started the FlexNet service in case, for some strange reason, Photoshop was waiting for it to start. That also did not work.
(And there is nothing in the Action Center control panel either despite the message saying there might be more information there.)
Edit: The timestamp above might be a little odd-looking. I didn't originally see anything in Event Viewer until I clicked the first button to send an Error Report. Mostly I just skipped that part of killing a process.

Problem Reading Adobe Photoshop CS3 Extended In Windows

I have Windows 7 and Photoshop CS3 Extended; can't read .psd file; error says not a supported file type; need to work with layers. When installed, received a Successful message upon installation. A solution to reading .psd files in Windows?

Thanks to both of you for responding. The files I am referring to are loaded to my C drive from ADOBE PHOTOSHOP CS3 "CLASSROOM IN A BOOK" tutorial. On the cover, it says "The official training workbook from Adobe Systems". I don't know what to do at this point. I'm ok with Html. Just need photoshop knowledge added and understand usde of .psd files provides a means to work with layering. Any suggestions?

I'm trying to insall Adobe Photoshop CS3 on a new ASUS ASM11BB001O computer equipped with 64-bit Windows 7. I use a "bundle" approach, first loading Photoshop 6, then upgrading with CS upgrade and then CS3 upgrade. The installation goes smoothly until I

I'm trying to install Adobe Photoshop CS3 on a new ASUS ASM11BB001O computer equipped with 64-bit Windows 7. I use a "bundle" approach, first loading Photoshop 6, then upgrading with CS upgrade and then CS3 upgrade. The installation goes smoothly until I add PS CS, and then it balks at the "accept" Adobe conditions screen. I have two other (Gateway) computers with Windows 7, 64-bit, on both of which the PS-6, CS-CS3 pathway worked fine. Any thoughts on how to get this working? Thanks

If your goal is to install and activate CS5 there is no need to install anything preceding it. You will only need to have the serial number from the preceding version that you upgrade from (CS3 I guess).

Windows 7 " Adobe Photoshop CS3 has stopped working "

Okay let me stir up a whole new kettle of fish WINDOWS 7 VS CS3 PHOTOSHOP.
I have Windows 7 Ultimate Edition 64bit. I am running (or trying) CS3 Master suite. Most all progams function except Photoshop. I try to load it and I get "Adobe Photoshop CS3 has stopped working" and then there is no fix and no help. Photoshop ran on Vista 64bit just fine.
I'm curious if anyone else is having this same issue? If so have you found any clue as to the issue?
I get the feeling this could be a conflict with a windows 7 update or something?
Any fixes?

Try right clicking on the PS CS3 icon and run as admin. I can tell you that people have a lot of problems in running PS CS3 in Windows 7 and had to download the Windows XP virtual and run CS3 in virtual mode.
Anyways here is a link to the suite forums. They may have a better answer there for you.
http://forums.adobe.com/community/creativesuites/creativesuites_windows

When installing Adobe Photoshop CS3 on Windows Vista I get this error "Setup has encountered an erro

When installing Adobe Photoshop CS3 on Windows Vista I get this error "Setup has encountered an error and cannot continue. Contact Adobe Customer Support for assistance. Internal Error 2739" I have used the cleanup script included in Adobe Photoshop CS3 installer, and have removed all traces of Adobe apps including the beta versions and Acrobat 8 pro, and I still get the same error, how can I install this application? is there any way or do I have to reformat and reinstall windows?

Hello everyone,
I was having the same issue:
"Setup Error. Setup has encountered an error and cannot continue. Contact Adobe Customer Support for assistance. Quit."
If you receive this error also, press Quit and follow these steps:
1. Start
2. Control Panel
3. Administrative tools (in classical view)
4. Event Viewer
5. Application
You will see something like this:
Double-Click for error (emphasized by red color). I have an error like this:
"Error 1327.Invalid Drive: E:\" if you have the same or e.g. Drive F:\ ir whatever letter, you should solve this problem extremely easy - just insert USB-flash into computer (it will launch as E\ or whatever disk) and than run installation again. It will work than.
Setup doesnt start if disk is offline.

Adobe Photoshop CS3 Extended installed but not working

Adobe Photoshop CS3 Extended was added to my computer when I bought it in Thailand.
Now (I am no longer in Thailand) I want to use it but I can't seem to open/do anything.
Even when asking for help with the 'Help' button it states that "There was an error in initializing the Adobe Help application. You may need to re-install the applicaiton and the Help componen".
How do I do this? Or am I missing something?
Thanks in advance for the help!
Eline

Haha... I like the honesty!
I was in bad need for a computer and went to one of those fancy, big shopping malls recommended to me by a couple of friends. I didn't even know I had Adobe Photoshop until today. I am not sure I really got screwed or things just work differently. The computer is a little strange... (I can write in Thai สกร่ฟส กส่ฟกส า่ฟส ่ if I would like to) but so far it's ben okay.
Anyways, what would you suggest I do Mylenium?

How can I syncronisch my allready bought dreamweaver cs3 and adobe photoshop cs3 on my windows surface pro tablet

hi there,
how should I sychronize my allready exsisting adobe photoshop cs3 adobe dreamweaver cs3 from my home computer on my windows surface pro tablet 8.1@@

Was this from disc or download?
If from disc, you'll need to connect an external disc drive via USB to the Surface.

■Adobe Photoshop CS3 Windows版アップグレード専用パッケージ (新品同様)

■Adobe Photoshop CS3を使っています。
PDFファイルをJPEG2000でフォーマット（.jpf）→■Adobe Photoshop CS3で開けないのですが、、、（エラー表示＝ドキュメントの種類が適切ではありません）
ご存知の方　ご指南よろしくお願いします。

OS不明(再掲）。
＃１でも書きましたが、「PDFファイルをJPEG2000でフォーマット（.jpf）」という手段の詳細が不明です。
フォーマットという用語をどういう意味で使っていますか？
今ではPDFファイルはAdobe製品の共通ファイル形式になっているので、PDFといったらあのアプリケーションというほど明確ではありません。
面倒臭がらずに丁寧に書くことです。同じ環境下の方がいたら再現できるくらいは書くことです。
ここのフォーラムでは新規投稿の場合は、返信が付くまでは投稿者に削除を含む編集権があるので、投稿直後には修正できたと思いますが。
件名（トピック見出し）の修正は以下を参照。
・フォーラム内に間違えて同じトピックを作ってしまった、もしくはトピックタイトルやトピック見出しの修正が必要になりました。
http://forums.adobe.co.jp/help/forumfaq.html#discussion
＞件名をJPEG2000での保存　と入力したはずでしたが
だとしても、この件名でもおかしくありませんか？
最初の質問投稿で「Photoshop CS3で開けないのですが」と書いていますから、保存のまえに開くことすらできないのでは？
質問投稿からすると、すでにファイルはJPEG2000形式になっているという理解でいいのだろうか？
それともPDFファイルそのものを開こうとしている？
下記はCSでの情報だが、プラグイン名は「JPEG 2000.8bi」とある（現在とは異なる可能性も）。
文書番号 : 223284
JPEG 2000 形式で保存できない
「画像を JPEG 2000 形式で保存するには、 JPEG 2000 プラグインをアプリケーション CD-ROM からインストールします。」
もしかして闇雲にフォルダーを開いている？「プラグイン」「JPEG」「JPEG2000」とかいった関連しそうな名前で検索はしていない？
下記サイトだと、Photoshop用プラグインの拡張子は「8bf」あるいは「8bi」だという（現在とは異なる可能性も）。
http://www.246.ne.jp/‾ogu/01-20/ext.htm
サポートデータベースには以下の拡張子を含むサポート文章が複数ある（かなり以前のものも含む）。
　　　　　8ba、8be、8bf、8bi、8bp、8bx、8by
なお、「JPEG2000」ではなく「JPEG 2000」と間を空けて書くのが正式であるという。
・JPEG 2000 - Wikipedia
http://ja.wikipedia.org/wiki/JPEG_2000

Adobe Photoshop CS3 printing to an HP Pro B9180

I am trying to print a borderless project. The preview looks perfect but when printed it cuts 1/8th of an inch off the top. I have reinstalled Adobe Photoshop CS3, reinstalled the printer and spent 2 hours with an HP tech online and no fixes yet. Windows Vista Home Premium is the O/S.
Any suggestions, thanks Jan

Hi Jan,
Don't know if this will help or not, but it may be worth a look. Russell Brown has a video tutorial on printing with CS3 to the HP Photosmart B9180 here:
http://www.russellbrown.com/tips_tech.html
You'll have to scroll about 1/3 down the page to get to the section entitled
Adobe Photoshop CS3 Standard Edition Tutorials
and its the third tutorial in the list. He also gives some useful tips about drivers et cetera.
Good luck.

Bridge not functioning in PhotoShop CS3 Extended

I deactivated Photoshop CS3 on a computer I was no longer using and installed it (CS3) another computer. I activiated CS3 on the new computer. However, when trying to use Bridge, I get a message that says that Adobe no longer supports Bridge Home and Bridge does not function on the new computer. Is there anything I can do to get Bridge to function as part of CS3 Extended?

Thanks, that worked.
In a message dated 12/28/2011 10:13:56 P.M. Eastern Standard Time,
[email protected] writes:
Re: Bridge not functioning in PhotoShop CS3 Extended
created by Curt Y (http://forums.adobe.com/people/Curt+Y) in Bridge
Windows - View the full discussion
(http://forums.adobe.com/message/4107610#4107610)

Adobe Photoshop CS3 Extended Trial

Hi guys, I've recently downloaded Adobe Photoshop CS3 Extended. When I select the trial period for 30 days instead of buying the product, it says that Adobe cannot continue and it's having trouble loading the trial. I reinstalled it and restarted my computer, like it said, and nothing worked. Please help, I cannot afford Adobe Photoshop CS3 Extended right now, and I do not support piracy at all.

I've tried to install the program from a different directory, I think my windows installer is crashing every time i try to install it, maybe I find a working hotfix for it.
I followed these steps when i tried to install ps:
http://666kb.com/i/b1qwvm0mq1zs8iekm.jpg
First I downloaded it to C:~~/Downloads (1.)
Then I extracted this file to C:~/Desktop (2.)
Afterwards I got these files (3.)
After clicking on setup.exe this window (4.) appears and disappears right after
Danke für die bisherige Hilfe
aus der Alpenrepublik
Fabs
/edit:
To unregister and register the msi hasn't solve my problem.
Now I am trying to run the sfc /scannow command.

Adobe Photoshop CS3 has stopped working: A problem caused the program to stop working correctly.

I recently purchased a new desktop computer and installed Adobe CS3 Master Edition on it and I get the following error:
Adobe Photoshop CS3 has stopped working: A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.
Out of the entire suite of tools only Photoshop will not launch. The weird thing is i also had the same Adobe programs installed on my laptop and I have not made any installation updates to that machine and i am getting the same error. I have always installed the same software on my two home machines with no problem until now. Any help is appreciated.
Thanks,
Andy

You'll probably going to have to uninstall, then re-install the application; but you need to provide a lot more information;
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Preview window not accurate - Adobe Photoshop CS3

Similar Messages

Maybe you are looking for