Previewing edits and start/stop points

OK, so I'm still new to this program (I've worked with ProTools and Cakewalk, but this is a bit different), so please bear with me. I'm trying to sample and adjust the different plugins for a track, but I'm running into trouble on two different fronts, thus two different questions:
1. Is there any way for me to preview any adjustments I make to the plugins before I implement them into the automation? That way, if I feel like something is wrong, I can simply re-adjust without having to rewrite the automation?
2. How do I select specific starting and stopping points within the track while editing and doing automation? As in, when I press stop twice, it goes back to a specific point in the song (as opposed to the beginning).

Hey Onigami,
we talked about last week here.
Why don't you run the plug-ins on several busses and do a volume automation on the bus?
2. when you see the (yellow line - volume) (press V on seleted track) click on the line with the cursor to add points (dots) then drag them.
Press the loop tool or simply press and drag with the mouse up in the measure bars numbers (light green line) and it loop over the selection.
to resume from the beginning press return, if you don't have the punch in or loop engaged (both green) when you press the space bar twice it should resume from where it stoped, if any of these are on it allways start from the selected point.
Best regards,
Jorge

Similar Messages

Multicamera Editing in CS4: Start / Stop Points Lost

I'm working on a larger project. I'm using multicamera switching in my sequences.
When I set a start and end point in my sequence, and then make a change in the Multi-Camera Monitor Window, the start/stop points are lost, and I have to find them again. This is extremely irritating, especially when the the project is in an advanced stage.
What was Adobe thinking in designing this behaviour, and what can I do about it?

I suppose for now, I'll just change the camera in the clip's context menu, but you'd think there'd be a more mature way to handle this.

When i plug my ipod in it says ipod cant be read cuz the apple mobile device is not started.And i went to services and apple mobile device properties and start stops in the middle.and its on automatic.and there isnt a stop button.

when i plug my ipod in it says ipod cant be read cuz the apple mobile device is not started.And i went to services and apple mobile device properties and start stops in the middle.and its on automatic.and there isnt a stop button.when i click start it says the apple mobile device services stopped in the middle then stopped.it said some services stop in the middle if not used by other services.and i just updated itunes before all a this and ever since ive had errors.

Have you looked at this article:
iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

Edit Cluster Start-stop- and Monitor-Scripts via Bash?

Hi,
is there a way to edit (and sync!) the Cluster-Scripts via CLI?
Regards
Bernd

The short answer is no. The scripts are stored in eDir, and NCS keeps revisions of them internally. The best place to edit them is iManager. Alternatively, you can directly change the eDir attributes for those scripts while cluster is down.
That said, everything that iManager does comes in through a file interface. If you goal is to script resource modification, you can always access the file interface directly.
Regards,
Changju
Originally Posted by toblerone
Hi,
is there a way to edit (and sync!) the Cluster-Scripts via CLI?
Regards
Bernd

Netweaver Preview edition and MI

Hi,
Is it possible to run MI on the preview edition of SAP NW abap + java stacks?
If yes, where can I find documentation on who to properly configure the abap and java stacks to properly work with MI.
also the java stack doesn't have web console?
Thanks

Hi Yakub,
Please deploy LMtools.sca then you will be able to see the NWMAdmin links...
you can find it in below link...
https://service.sap.com/swdc
Support Packages and Patches - SAP NetWeaver- SAP NETWEAVER - SAP NETWEAVER 2004S"- Entry by Component- Mobile Infrastructure (MI) -LIFECYCLE MGMT TOOLS 7.00-#OS independent- LMtoolsxxxxx.sca
Regards,
Satyendra

NW preview edition and MI web console

Hi,
Is there a reason the NW Java preview edition doesnt have the MI web console? Since the ABAP edition has related MI components.
Thanks

Hi Yakub,
Please deploy LMtools.sca then you will be able to see the NWMAdmin links...
you can find it in below link...
https://service.sap.com/swdc
Support Packages and Patches - SAP NetWeaver- SAP NETWEAVER - SAP NETWEAVER 2004S"- Entry by Component- Mobile Infrastructure (MI) -LIFECYCLE MGMT TOOLS 7.00-#OS independent- LMtoolsxxxxx.sca
Regards,
Satyendra

Visual admin and start/stop dispatcher

What is the normal procedure for starting and stopping dispatcher....
Is it normally done at UNIX through ./go script? and what is the normal way to shutdown j2ee engine....
just wonder what the standard practice was...
Also where do I find the Visual admin tool...is this under the admin filesystem and just run go....
Thanks
John Ryan

Check if you DEFAULT.PFL contain the following entries
SAP Central Service Instance for J2EE
j2ee/scs/host = <host>
j2ee/scs/system = <SCS Inst.No>
j2ee/ms/port = <port>
j2ee/dbtype =
j2ee/dbname = <sid>
j2ee/dbhost = <host>
And the Instance Profile should have the followin entries
Instance Profile
jstartup/trimming_properties =
jstartup/protocol =
jstartup/vm/home =
jstartup/max_caches =
jstartup/release =
jstartup/instance_properties =
j2ee/dbdriver =
rdisp/j2ee_start_control =
rdisp/j2ee_libpath =
exe/j2ee = $
j2ee/instance_id =

Track Start/Stop Point (on match) no longer working on ios7?

Translates to IPAD but not phone ?? Anyone else? Stopped after ios7 upgrade.

Translates to IPAD but not phone ?? Anyone else? Stopped after ios7 upgrade.

Possible to Start/Stop Mark Clips In Timeline?

Hello,
I'm using FCP5 on a Dual 2.7 G5 running 10.4.2
I captured a couple of DV tapes, added a Time Code Generator, and gave the footage to a client on DVD so that they could create a list of shots to not include in the final edit.
I took this list and went through making cuts at the client's listed start and stop Time Codes. The problem I am having is some of the clips left on the timeline have camera start/stop points. I would like to mark these using "DV Start/Stop Detect" so that I could create new edit points between each start/stop of the camera.
I can double click each clip in the timeline... opening it in the viewer... and then select "Mark>DV Start/Stop Detect" and this does exactly what I want. It is very tedious though. Is there anyway to automate this process for each clip in the timeline. I hope I explained what I am trying to do clearly. If not please ask questions and I can fill in details.
Thank You,
Matt

Thanks for the suggestion. Yes, it would have been alot smarter to run the Start/Stop Detection as my first step after capturing. I'm new to FCP, and my old NLE (Premiere Pro 1.5) would break the Camera Start/Stops into separate .avi files on the hard drive and in the project window / browser. I just didn't think about it this time... but definitely will next time.
What I ended up doing is using the track forward selection tool to select all the clips in the timeline that I wanted to mark. I created a new bin in the browser and put all of my clips in the timeline in this new bin (creating subclips?)
Then I selected all of these clips in the browser and ran the Start/Stop Detect tool. After it finished I sorted all the newly marked clips in my browser by their in points. I then selected all of my clips, dragging them back into the timeline. I put them on a new track so that I could make sure everything lined up correctly. It did. It ended up being a pretty simple fix. Just had to think about it a bit over dinner.
Thank You,
Matt

How can I create individual clips after doing DV start/stop locate?

I know how to take a clip and have FCE mark the DV start/stop points, but is there a way to have FCE then automatically make individual clips based on the DV in/out points?

Yes, that's actually what is 'behind the scene' in each subclip. This is actually a very powerful thing, as you will discover as you gain experience editing.
Yes, they act as if they are completely independent of each other, you can apply further edits, filters, effects etc. to each subclip individually.
Switching from iMovie to FCE takes some adjustment, that's for sure. But FCE is much much more capable than iMovie.
I encourage you to get a copy of Tom Wolsky's excellent book - Final Cut Express 2 Editing Workshop. It's the best thing available to get you started with FCE ... and it includes a DVD where he shows you the differences between using iMovie and FCE. Tom has also recently produced an FCE training DVD, too, Final Cut Express HD Made Easy, and he is an active participant in this forum.

Print to Video Start Stop recording

Hello
Ok is their any way to have FCP mark a Start Stop after each clip when recording a timeline with many clips. So that when recaptured it imports each clip in the Timeline as an individual clip.
Perhaps their is another software for this.
I have been reading the Manual back and fourth cant find out how to add start stop points. I have tried markers transitions blank space. Nothing wants to work.

Thank you for your help.
Your suggestion got me to come up with a few other things which led me to what I am going to do.
I still am going to try the Adobe thing I'll let you know how that goes.
I will have a directory with markers one for each tape on a USB stick.
A black slug around 2 frames in between each clip and enough black to start off and to end with as to keep every frame.
One thing though.
The reason I was trying to do start and stop was in the event someone else needed to record the Tape but I will probable be the only one to do such.

Set video start end points- trim

I brought a short .mov into my keynote and want to trim the start/stop points but the ability to do so is crude in keynote unless I'm missing something... All I can see is to move the start/stop points with the mouse in the inspector... but very crude movement if I want to catch a certain endpoint. Is there a better way? i.e. keyboard control of endpoints or such?

Hi Robert,
I don't think there is. I'd suggest taking the clip into iMovie (or Quicktime) and cropping it more finely that way.

Pausing/stopping point ref.

I have 28 .mov files created in QT 7.6. These videos will be viewed on our website for certain accounts. I want to be able to get the place/time someone stops or pauses a movie, like Netflicks. I want to be able to start the movie from the place they last stopped so they didn't need to start over. (I assume I would use a cookie and update it with the video name and starting/stopping place.)

Set the audio options on "stream" for the timeline. Then - a blank keyframe would do just fine. When you need the audio on, put it again and adjust the start point in the properties panel.
Emil Georgiev - Flash and Web Design

How to Get Duration, Start/Stop Time of Each Instance (Run)

Can someone tell me how to get the Duration, as well as Execution Start/Stop times for a given run (Instance) of a Report, stored in History?
For example, on the BO Server in InfoView, I can browse the History of each report, and for each run, I can click the details and view the Duration and Start/Stop times for that run. How do I get that information in Java via the SDK?
Neither IProcessInfo nor ISchedulingInfo seems to have this information.
For example, ISchedulingInfo's Start/Stop Times are for general scheduling (when the report will stop being scheduled). That is not what I want.
I need specific data for a given completed Run, namely its duration and time endpoints. Thanks a lot.

Hi,
fetch the instance of the run like this
IInfoObjects list = infoStore.query(
"select SI_STARTTIME , SI_ENDTIME From CI_INFOOBJECTS Where SI_ID=<instanceIDtoMeasure>"
IInfoObject element = list.get(0);
Date startTime = element.properties().getDate("SI_STARTTIME");
System.out.println("Beginn "+ startTime);
Date endTime = element.properties().getDate("SI_ENDTIME" );
System.out.println("End " + endTime);
long time = ((endTime.getTime() - startTime.getTime()) / 1000);
System.out..println("Runtime " + time + " sec");
You can get the nstanceIDtoMeasure form your Report with getInstances
Enjoy
johannes

EP6 in sneak preview edition

Hi there,
I have downloaded the NW04 SP15 Sneak Preview Edition from SDN and it has EP6 along with it. I am working on it at the moment. I would like to know whether there are any differences between the sneak preview edition and the licensed version of the portal? Or is it exactly the same, and the difference lies only in the license?
Thanks in advance for any replies.

Thank you Abdul. It seems working though I did get different error - password not confirming to policy. I need to figure out what the ps requirement is (length, special char,...).

Previewing edits and start/stop points

Similar Messages

Maybe you are looking for