Previewing HD problem.
I cant watch HD videos like 1080p trailer i downloaded through. frames keeps drops , infact almost not moving, even sound is droping. i have 5g of ram and my graphic card is GeForce 7800 GT. even i feel motion 3 is slow just preview not even rendering. i thought upgrading my graphic card might solve the problem. so what you think? i am thinking of GeForce 8800 GTX i heard its good one. but will it work on my Quad G5 or not and will it solve the problem.
thanks for your help.
Hi-
The Geforce 8800 won't work in your G5. Only for the MacPro machine. The only other option you have for graphics is the X1900XT, which is roughly the same performance as the 7800 GT.
What is your hard drive condition? One or two? How full?
Similar Messages
-
Avoiding preview stuttering problems
I am creating a new post here as I marked the last one I posted on this subject as answered.
In that post I asked would a new graphics card help to eliminate the severe stuttering caused by my windows xp machine (2 intel P4 processors 3.2) failing to decompress the MP4 files from my Sony NEX-5 quickly enough? The answer was an unequivocal NO as it was the processors, not the card.
Since then I have been doing some experimentation:
I downloaded trial versions of Cyberlink Power Director and Sony Vegas Movie Studio HD Platinum 10. The latter stuttered worse than PE but the Cyberlink app had almost faultless previews - no stuttering. Unfortunately it is a pretty horrible programme otherwise, and any case I am used to Premiere having use an early version of PP for years, so I experimented some more:
In PE I created a project with a project setting of PAL-AVCHD-HD 1081i25, loaded some MP4 clips taken with theNEX 5 on the MP4 1440 x 1080 setting and then burnt the project to DVD.
I then saved the movie as an AVI, removed the original MP4 clips and imported the AVI file I had just made. The project asked me if I wanted to change the project settings to match the clip and and I said yes. I then burned this to a DVD.
I then deleted the AVI clip and imported the original MP4 clips (into what is now effectively a PAL-DV-Widescreen 48KHz project setting I imagine). This time I was not asked if I wanted to change the settings but a red line appeared above the clips indicating they needed rendering. I rendered them and - voila! No stuttering - perfectly smooth preview of the MP4 clips. I then burned this to DVD.
Next I compared the DVDs on a Sony 42inch HD TV. No difference! All three of very good quality, at least to my eyes..
So what is happening here? When I rendered the clips in the PAL DV project was it turning them into AVI files because of the project settings? And is it that the first DVD (with the MP4 clips straight from the camera), which I would have expected to be of better quality than the other two, was not actually producing a HD DVD inspite of the camera and project setting?
Is the only way I am going to get true HD to set the camera to AVCHD and burn to Blu-Ray?
If any one has knowledge of these things I would love to hear from you as while I seem to have found an answer to the stuttering I would love to know what is going on and if I am fooling myself. Many thanks.Thanks for the reply.
I have not explained myself very well.
There is no problem with the DVDs - whatever settings I use to edit, the DVDs play very well, smooth and reasonably high quality in my estimation..
And as far as I know there is no interlacing going on as I am not using the camera's highest avchd setting (which is interlaced), only the 1440x1080 MP4.
The problem is with the editing previews, which when I open an HD project and import my MP4 camera files is very jerky to the point of being almost unusable at times, with long waits during operations. A look in Window Task Manager shows both CPUs maxing out all the time. According to the reply I had from an earlier post, this is because my CPUs are not up to the job of decompressing the MP4 files on the fly.
What I have found is that if I import my MP4 files into a project with DV settings, I get a red line above the timeline. If I then render the clips, the editing improves dramatically - no stuttering at all and no long waits after mouse clicks or key presses and the CPUs only working at about 50%. Of course it can take a while to render a number of clips, but I can go and do something else while that is happening and when I return the editing goes like clockwork.
My question is - what is happening to the quality of the video? I cannot see any difference in output (DVDs) whatever project settings I use, they all seem equally good. So hopefully I have found an answer to the preview stuttering problem. But I suspect I am not getting real HD from any of them. To do this I imagine I need to set the camera to AVCHD rather than 1440x1080 MP4 and burn to Blu-ray. This I have not tried yet as I do not have a Blu-Ray burner.
My problem is my ignorance of what PE is doing to the MP4 files when it renders them. And why, if I set the project settings to HD 1080i25 instead of PAL DV and work directly on the unrendered MP4 clips (and put up with the stuttering) do I not see a visible increase in quality when I burn the DVD? Is there some sort of levelling going on during the DVD coding? -
PDF and Preview related problems
Hi:
A user in our office (MacBook Pro, v10.5.6) is having difficulty viewing and creating PDF files. To wit:
--Opening a PDF file results in a morass of symbols throughout.
--Opening a PDF file may show exclamation points substituted for tab characters.
Some other files appear to be just fine using Preview, and occasionally the latter of the two above will open and appear to be just fine and dandy. The files appear to be just fine on another Mac.
The two files appear correctly when viewed with Adobe Reader 9.0.
Also:
--Creating a PDF file may result in exclamation points substituted for tab characters.
I tried a full system software archive and install...no luck.
I tried deleting the Adobe Reader and Preview preferences files...no luck.
I dragged and dropped a copy of Preview (v4.1) from my computer to hers...no luck.
I created a Second User, and the previously mangled PDF files open and appear to be just fine. I can also create PDF files that are true to their source document (no exclamation points for tab characters). I did only limited testing of this; however I did use the files above and created a new PDF file using the original source document. No problems.
I don't believe this is a missing font problem.
So that makes me think there's something wrong in the user's home directory with Preview and the PDF creation process. Some preference file or something.
Before I go ahead and move my data over to a new home directory...
1. Has anyone seen this before?
2. Has anyone fixed this before?
3. How do I know which files to move to the new home directory and which (corrupted ones) to leave behind..if that indeed is the fix?
4. How do I know that the creation problem doesn't extend beyond this user, and that I wasn't just lucky when Second User's PDF-created file was fine?
TIA,
mmYou need to resolve the conflict/corruption in the original account. This can be a laborious process, but is guaranteed to resolve the problem. While logged into the newly created account (if it's an admin account; otherwise create a new one), backup the bad account's folder (to another volume, partition, or disk), delete the bad account, selecting the save data option (which is stored in /Users/Deleted Users/ as a disk image), recreate the bad account using the same username/password combo, log out and back into the recreated original account. Run Preview and, If the problem's solved (which it should be), open the saved data dmg file in /Users/Deleted Users/, open the /Library/Preferences/ folder from the saved data, open the current /Users/restored account/Library/Preferences/ folder, and slowly copy plist files from the saved data folder to the current one that don't exist in it, keeping track of what you're moving to the new account so you can remove them if you encounter problems in the next step. Log out and back in to ensure there's no conflict and things still work correctly. Good luck.
-
Preview color problem in Bridge CS 5.5
I'm having the following problem with the thumbnails and previews in Bridge CS 5.5.
After I've scanned an image, the preview matches the colors I expect, with nice saturated colors.
After opening the image in Raw and making a few changes such as crop I press done and return to Bridge.
The preview I get is much less saturated then it was before.
When I reopen the image with Raw it first appears less saturated but shortly after, the saturated color returns.
Saving the image as a Jpeg gives the correct, saturated colors.
This problem first occurred after registering the product and receiving an update for Raw.
Extra info: I'm working with Nikon .nef files. Converting them to Adobe .dng format solves the problem.
Message was edited by: HazelnootYou must have done a screen shot of the thumbnail as the enlarged version is same size. But can still see difference.
I would revisit your thumbnail setting and make sure it is HQ Iif you want to see edits in thumbs, and check the default ACR setting. Don't assume they are the same as computer can do unexpected things.
Read the link I gave in post #1 as see if you have all the correct options selected.
When you click on thumb does the preveiw panel show the same dull image or a correct one?
It is possible the update fouled everything up, but seems like there would be more complaints. I am still on ACR 6.4 however. Am a slow adopter. -
I have both Pr and Ae previews/playback set to go through a canopus advc-100 feeding external ntsc monitors. After most recent CC update, AE no longer playbacks ram previews through the external monitor and often crashes. Premiere previews and renders only audio with video freezing on first frame in program playback and no playback on external monitors as well as no playhead movement on the timeline. Output-ed mp4 files playback fine with VLC or WMP. When I disable playback through the canopus, all problems go away. I would like to get my playback returned to my external monitors asap. I have completely wiped drives, reinstalled software, upgraded components, all with no luck. Any assistance is greatly appreciated. As a work around, I want to rollback the recent update to Pr 7.2.1 and Ae 12.2.1 to get back in working order until I am confident that Pr 7.2.2 and Ae 12.2.1.5 can once again output through my canopus.
Running a Dell XPS420 with 8gb RAM; Quadro 2000D. outputing to canopus with texas instruments 1394 OHCI controller.These links should help you roll back:
How to Access, Restore or Update to Any Version of Adobe CC Apps | ProDesignTools
Revert to Previous Version of Premiere Pro CC | Adobe Community
Cheers,
Jeff -
NW2004s preview install problem (dispatcher)
Hi,
I am trying to install the preview version of NW2004s workplace on my XP machine/2GB but I don't maange because the J2E engine doesn't start. The jcontrol process is started correctly, but the dispatcher one never manage to start...
After 20 minutes the system is giving up.
Here are the log of the jcontrol process:
trc file: "F:\usr\sap\J2E\JC00\work\dev_jcontrol", trc level: 1, release: "700"
node name : jcontrol
pid : 6064
system name : J2E
system nr. : 00
started at : Thu Dec 28 14:41:10 2006
arguments :
arg[00] : F:\usr\sap\J2E\JC00\exe\jcontrol.EXE
arg[01] : pf=F:\usr\sap\J2E\SYS\profile\J2E_JC00_lofoten
[Thr 3196] Thu Dec 28 14:41:10 2006
[Thr 3196] *** WARNING => INFO: Unknown property [instance.en.host=lofoten] [jstartxx.c 841]
[Thr 3196] *** WARNING => INFO: Unknown property [instance.box.number=J2EJC00lofoten] [jstartxx.c 841]
[Thr 3196] *** WARNING => INFO: Unknown property [instance.en.port=3201] [jstartxx.c 841]
[Thr 3196] *** WARNING => INFO: Unknown property [instance.system.id=0] [jstartxx.c 841]
JStartupReadInstanceProperties: read instance properties [F:\usr\sap\J2E\JC00\j2ee\cluster\instance.properties;F:\usr\sap\J2E\JC00\SDM\program\config\sdm_jstartup.properties]
-> ms host : lofoten
-> ms port : 3901
-> OS libs : F:\usr\sap\J2E\JC00\j2ee\os_libs
-> Admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
Used property files
-> files [00] : F:\usr\sap\J2E\JC00\j2ee\cluster\instance.properties
-> files [01] : F:\usr\sap\J2E\JC00\SDM\program\config\sdm_jstartup.properties
Instance properties
-> ms host : lofoten
-> ms port : 3901
-> os libs : F:\usr\sap\J2E\JC00\j2ee\os_libs
-> admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
Bootstrap nodes
-> [00] bootstrap : F:\usr\sap\J2E\JC00\j2ee\cluster\instance.properties
Worker nodes
-> [00] sdm : F:\usr\sap\J2E\JC00\SDM\program\config\sdm_jstartup.properties
[Thr 3196] [Node: bootstrap] java home is set by profile parameter
Java Home: C:\j2sdk1.4.2_13
[Thr 3196] Thu Dec 28 14:41:13 2006
[Thr 3196] JStartupICheckFrameworkPackage: can't find framework package F:\usr\sap\J2E\JC00\exe\jvmx.jar
JStartupIReadSection: read node properties [bootstrap]
-> node name : bootstrap
-> node type : bootstrap
-> node execute : yes
-> java path : C:\j2sdk1.4.2_13
-> java parameters : -Djco.jarm=1
-> java vm version : 1.4.2_13-b06
-> java vm vendor : Java HotSpot(TM) Server VM (Sun Microsystems Inc.)
-> java vm type : server
-> java vm cpu : x86
-> heap size : 512M
-> root path : F:\usr\sap\J2E\JC00\j2ee\cluster
-> class path : .\bootstrap\launcher.jar
-> OS libs path : F:\usr\sap\J2E\JC00\j2ee\os_libs
-> main class : com.sap.engine.offline.OfflineToolStart
-> framework class : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path : F:\usr\sap\J2E\JC00\exe\jstartup.jar;F:\usr\sap\J2E\JC00\exe\jvmx.jar
-> parameters : com.sap.engine.bootstrap.Bootstrap ./bootstrap ID0029947
-> debuggable : yes
-> debug mode : no
-> debug port : 60000
-> shutdown timeout : 120000
[Thr 3196] JControlExecuteBootstrap: execute bootstrap process [bootstrap]
[Thr 3196] [Node: bootstrap] java home is set by profile parameter
Java Home: C:\j2sdk1.4.2_13
[Thr 3196] JStartupICheckFrameworkPackage: can't find framework package F:\usr\sap\J2E\JC00\exe\jvmx.jar
JStartupIReadSection: read node properties [bootstrap]
-> node name : bootstrap
-> node type : bootstrap
-> node execute : yes
-> java path : C:\j2sdk1.4.2_13
-> java parameters : -Djco.jarm=1
-> java vm version : 1.4.2_13-b06
-> java vm vendor : Java HotSpot(TM) Server VM (Sun Microsystems Inc.)
-> java vm type : server
-> java vm cpu : x86
-> heap size : 512M
-> root path : F:\usr\sap\J2E\JC00\j2ee\cluster
-> class path : .\bootstrap\launcher.jar
-> OS libs path : F:\usr\sap\J2E\JC00\j2ee\os_libs
-> main class : com.sap.engine.offline.OfflineToolStart
-> framework class : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path : F:\usr\sap\J2E\JC00\exe\jstartup.jar;F:\usr\sap\J2E\JC00\exe\jvmx.jar
-> parameters : com.sap.engine.bootstrap.Bootstrap ./bootstrap ID0029947
-> debuggable : yes
-> debug mode : no
-> debug port : 60000
-> shutdown timeout : 120000
JControlStartJLaunch: program = F:\usr\sap\J2E\JC00\exe\jlaunch.exe
-> arg[00] = F:\usr\sap\J2E\JC00\exe\jlaunch.exe
-> arg[01] = pf=F:\usr\sap\J2E\SYS\profile\J2E_JC00_lofoten
-> arg[02] = -DSAPINFO=J2E_00_bootstrap
-> arg[03] = -nodeId=-1
-> arg[04] = -file=F:\usr\sap\J2E\JC00\j2ee\cluster\instance.properties
-> arg[05] = -syncSem=JSTARTUP_WAIT_ON_6064
-> arg[06] = -nodeName=bootstrap
-> arg[07] = -jvmOutFile=F:\usr\sap\J2E\JC00\work\jvm_bootstrap.out
-> arg[08] = -stdOutFile=F:\usr\sap\J2E\JC00\work\std_bootstrap.out
-> arg[09] = -locOutFile=F:\usr\sap\J2E\JC00\work\dev_bootstrap
-> arg[10] = -mode=BOOTSTRAP
-> arg[11] = pf=F:\usr\sap\J2E\SYS\profile\J2E_JC00_lofoten
-> lib path = PATH=C:\j2sdk1.4.2_13\jre\bin\server;C:\j2sdk1.4.2_13\jre\bin;c:\sapdb\programs\bin;c:\sapdb\programs\pgm;c:\windows\system32;F:\usr\sap\J2E\JC00\exe;C:\sapdb\programs\pgm;F:\usr\sap\J2E\SYS\exe\uc\NTI386
-> exe path = PATH=C:\j2sdk1.4.2_13\bin;F:\usr\sap\J2E\JC00\j2ee\os_libs;c:\sapdb\programs\bin;c:\sapdb\programs\pgm;c:\windows\system32;F:\usr\sap\J2E\JC00\exe;C:\sapdb\programs\pgm;F:\usr\sap\J2E\SYS\exe\uc\NTI386
[Thr 3196] Thu Dec 28 14:41:42 2006
[Thr 3196] JControlExecuteBootstrap: read instance values after global bootstrap
[Thr 3196] *** WARNING => INFO: Unknown property [instance.box.number=J2EJC00lofoten] [jstartxx.c 841]
[Thr 3196] *** WARNING => INFO: Unknown property [instance.en.host=lofoten] [jstartxx.c 841]
[Thr 3196] *** WARNING => INFO: Unknown property [instance.en.port=3201] [jstartxx.c 841]
[Thr 3196] *** WARNING => INFO: Unknown property [instance.system.id=0] [jstartxx.c 841]
JStartupReadInstanceProperties: read instance properties [F:\usr\sap\J2E\JC00\j2ee\cluster\instance.properties;F:\usr\sap\J2E\JC00\SDM\program\config\sdm_jstartup.properties]
-> ms host : lofoten
-> ms port : 3901
-> OS libs : F:\usr\sap\J2E\JC00\j2ee\os_libs
-> Admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
[Thr 3196] JControlExecuteBootstrap: enumerate the nodes after global bootstrap
Used property files
-> files [00] : F:\usr\sap\J2E\JC00\j2ee\cluster\instance.properties
-> files [01] : F:\usr\sap\J2E\JC00\SDM\program\config\sdm_jstartup.properties
Instance properties
-> ms host : lofoten
-> ms port : 3901
-> os libs : F:\usr\sap\J2E\JC00\j2ee\os_libs
-> admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
Bootstrap nodes
-> [00] bootstrap : F:\usr\sap\J2E\JC00\j2ee\cluster\instance.properties
-> [01] bootstrap_ID2994700 : F:\usr\sap\J2E\JC00\j2ee\cluster\instance.properties
-> [02] bootstrap_ID2994750 : F:\usr\sap\J2E\JC00\j2ee\cluster\instance.properties
Worker nodes
-> [00] ID2994700 : F:\usr\sap\J2E\JC00\j2ee\cluster\instance.properties
-> [01] ID2994750 : F:\usr\sap\J2E\JC00\j2ee\cluster\instance.properties
-> [02] sdm : F:\usr\sap\J2E\JC00\SDM\program\config\sdm_jstartup.properties
[Thr 3196] JControlExecuteBootstrap: execute bootstrap process [bootstrap_ID2994700]
[Thr 3196] [Node: dispatcher bootstrap] java home is set by profile parameter
Java Home: C:\j2sdk1.4.2_13
[Thr 3196] Thu Dec 28 14:41:43 2006
[Thr 3196] JStartupICheckFrameworkPackage: can't find framework package F:\usr\sap\J2E\JC00\exe\jvmx.jar
JStartupIReadSection: read node properties [bootstrap_ID2994700]
-> node name : dispatcher bootstrap
-> node type : bootstrap
-> node execute : yes
-> jlaunch parameters :
-> java path : C:\j2sdk1.4.2_13
-> java parameters : -Djco.jarm=1
-> java vm version : 1.4.2_13-b06
-> java vm vendor : Java HotSpot(TM) Server VM (Sun Microsystems Inc.)
-> java vm type : server
-> java vm cpu : x86
-> heap size : 32M
-> root path : F:\usr\sap\J2E\JC00\j2ee\cluster
-> class path : .\bootstrap\launcher.jar
-> OS libs path : F:\usr\sap\J2E\JC00\j2ee\os_libs
-> main class : com.sap.engine.offline.OfflineToolStart
-> framework class : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path : F:\usr\sap\J2E\JC00\exe\jstartup.jar;F:\usr\sap\J2E\JC00\exe\jvmx.jar
-> parameters : com.sap.engine.bootstrap.Bootstrap ./bootstrap ID002994700
-> debuggable : yes
-> debug mode : no
-> debug port : 60000
-> shutdown timeout : 120000
JControlStartJLaunch: program = F:\usr\sap\J2E\JC00\exe\jlaunch.exe
-> arg[00] = F:\usr\sap\J2E\JC00\exe\jlaunch.exe
-> arg[01] = pf=F:\usr\sap\J2E\SYS\profile\J2E_JC00_lofoten
-> arg[02] = -DSAPINFO=J2E_00_bootstrap
-> arg[03] = -nodeId=-1
-> arg[04] = -file=F:\usr\sap\J2E\JC00\j2ee\cluster\instance.properties
-> arg[05] = -syncSem=JSTARTUP_WAIT_ON_6064
-> arg[06] = -nodeName=bootstrap_ID2994700
-> arg[07] = -jvmOutFile=F:\usr\sap\J2E\JC00\work\jvm_bootstrap_ID2994700.out
-> arg[08] = -stdOutFile=F:\usr\sap\J2E\JC00\work\std_bootstrap_ID2994700.out
-> arg[09] = -locOutFile=F:\usr\sap\J2E\JC00\work\dev_bootstrap_ID2994700
-> arg[10] = -mode=BOOTSTRAP
-> arg[11] = pf=F:\usr\sap\J2E\SYS\profile\J2E_JC00_lofoten
-> lib path = PATH=C:\j2sdk1.4.2_13\jre\bin\server;C:\j2sdk1.4.2_13\jre\bin;c:\sapdb\programs\bin;c:\sapdb\programs\pgm;c:\windows\system32;F:\usr\sap\J2E\JC00\exe;C:\sapdb\programs\pgm;F:\usr\sap\J2E\SYS\exe\uc\NTI386
-> exe path = PATH=C:\j2sdk1.4.2_13\bin;F:\usr\sap\J2E\JC00\j2ee\os_libs;c:\sapdb\programs\bin;c:\sapdb\programs\pgm;c:\windows\system32;F:\usr\sap\J2E\JC00\exe;C:\sapdb\programs\pgm;F:\usr\sap\J2E\SYS\exe\uc\NTI386
[Thr 3196] Thu Dec 28 14:41:56 2006
[Thr 3196] JControlExecuteBootstrap: execute bootstrap process [bootstrap_ID2994750]
[Thr 3196] [Node: server0 bootstrap] java home is set by profile parameter
Java Home: C:\j2sdk1.4.2_13
[Thr 3196] Thu Dec 28 14:41:57 2006
[Thr 3196] JStartupICheckFrameworkPackage: can't find framework package F:\usr\sap\J2E\JC00\exe\jvmx.jar
JStartupIReadSection: read node properties [bootstrap_ID2994750]
-> node name : server0 bootstrap
-> node type : bootstrap
-> node execute : yes
-> jlaunch parameters :
-> java path : C:\j2sdk1.4.2_13
-> java parameters : -Djco.jarm=1
-> java vm version : 1.4.2_13-b06
-> java vm vendor : Java HotSpot(TM) Server VM (Sun Microsystems Inc.)
-> java vm type : server
-> java vm cpu : x86
-> heap size : 512M
-> root path : F:\usr\sap\J2E\JC00\j2ee\cluster
-> class path : .\bootstrap\launcher.jar
-> OS libs path : F:\usr\sap\J2E\JC00\j2ee\os_libs
-> main class : com.sap.engine.offline.OfflineToolStart
-> framework class : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path : F:\usr\sap\J2E\JC00\exe\jstartup.jar;F:\usr\sap\J2E\JC00\exe\jvmx.jar
-> parameters : com.sap.engine.bootstrap.Bootstrap ./bootstrap ID002994750
-> debuggable : yes
-> debug mode : no
-> debug port : 60000
-> shutdown timeout : 120000
JControlStartJLaunch: program = F:\usr\sap\J2E\JC00\exe\jlaunch.exe
-> arg[00] = F:\usr\sap\J2E\JC00\exe\jlaunch.exe
-> arg[01] = pf=F:\usr\sap\J2E\SYS\profile\J2E_JC00_lofoten
-> arg[02] = -DSAPINFO=J2E_00_bootstrap
-> arg[03] = -nodeId=-1
-> arg[04] = -file=F:\usr\sap\J2E\JC00\j2ee\cluster\instance.properties
-> arg[05] = -syncSem=JSTARTUP_WAIT_ON_6064
-> arg[06] = -nodeName=bootstrap_ID2994750
-> arg[07] = -jvmOutFile=F:\usr\sap\J2E\JC00\work\jvm_bootstrap_ID2994750.out
-> arg[08] = -stdOutFile=F:\usr\sap\J2E\JC00\work\std_bootstrap_ID2994750.out
-> arg[09] = -locOutFile=F:\usr\sap\J2E\JC00\work\dev_bootstrap_ID2994750
-> arg[10] = -mode=BOOTSTRAP
-> arg[11] = pf=F:\usr\sap\J2E\SYS\profile\J2E_JC00_lofoten
-> lib path = PATH=C:\j2sdk1.4.2_13\jre\bin\server;C:\j2sdk1.4.2_13\jre\bin;c:\sapdb\programs\bin;c:\sapdb\programs\pgm;c:\windows\system32;F:\usr\sap\J2E\JC00\exe;C:\sapdb\programs\pgm;F:\usr\sap\J2E\SYS\exe\uc\NTI386
-> exe path = PATH=C:\j2sdk1.4.2_13\bin;F:\usr\sap\J2E\JC00\j2ee\os_libs;c:\sapdb\programs\bin;c:\sapdb\programs\pgm;c:\windows\system32;F:\usr\sap\J2E\JC00\exe;C:\sapdb\programs\pgm;F:\usr\sap\J2E\SYS\exe\uc\NTI386
[Thr 3456] Thu Dec 28 14:42:49 2006
[Thr 3456] JControlRequestFunc: Thread 3456 started as listener thread for np messages.
[Thr 3196] JControlIBuildProcessList: Maximum error count is set to 4
[Thr 3196] *** WARNING => Maximum Java heap size specified twice (through maxHeapSize and in javaParameters) - using -Xmx32m [jstartxx.c 2604]
[Thr 3196] [Node: dispatcher] java home is set by profile parameter
Java Home: C:\j2sdk1.4.2_13
[Thr 3196] Thu Dec 28 14:42:50 2006
[Thr 3196] JStartupICheckFrameworkPackage: can't find framework package F:\usr\sap\J2E\JC00\exe\jvmx.jar
JStartupIReadSection: read node properties [ID2994700]
-> node name : dispatcher
-> node type : dispatcher
-> node execute : yes
-> jlaunch parameters :
-> java path : C:\j2sdk1.4.2_13
-> java parameters : -Djava.security.policy=./java.policy -Djava.security.egd=file:/dev/urandom -Djco.jarm=1 -XX:NewSize=5m -XX:MaxNewSize=5m -Drdbms.driverLocation=C:/sapdb/programs/runtime/jar/sapdbc.jar
-> java vm version : 1.4.2_13-b06
-> java vm vendor : Java HotSpot(TM) Server VM (Sun Microsystems Inc.)
-> java vm type : server
-> java vm cpu : x86
-> heap size : 32M
-> init heap size : 15M
-> stack size : 2M
-> root path : F:\usr\sap\J2E\JC00\j2ee\cluster\dispatcher
-> class path : .\bin\boot\boot.jar;.\bin\system\bytecode.jar;.
-> OS libs path : F:\usr\sap\J2E\JC00\j2ee\os_libs
-> main class : com.sap.engine.boot.Start
-> framework class : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path : F:\usr\sap\J2E\JC00\exe\jstartup.jar;F:\usr\sap\J2E\JC00\exe\jvmx.jar
-> parameters :
-> debuggable : no
-> debug mode : no
-> debug port : 60000
-> shutdown timeout : 120000
[Thr 3196] *** WARNING => Maximum Java heap size specified twice (through maxHeapSize and in javaParameters) - using -Xmx512m [jstartxx.c 2604]
[Thr 3196] [Node: server0] java home is set by profile parameter
Java Home: C:\j2sdk1.4.2_13
[Thr 3196] Thu Dec 28 14:42:51 2006
[Thr 3196] JStartupICheckFrameworkPackage: can't find framework package F:\usr\sap\J2E\JC00\exe\jvmx.jar
JStartupIReadSection: read node properties [ID2994750]
-> node name : server0
-> node type : server
-> node execute : yes
-> jlaunch parameters :
-> java path : C:\j2sdk1.4.2_13
-> java parameters : -Djava.security.policy=./java.policy -Djava.security.egd=file:/dev/urandom -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy -Dorg.xml.sax.driver=com.sap.engine.lib.xml.parser.SAXParser -verbose:gc -Djco.jarm=1 -XX:PermSize=64m -XX:MaxPermSize=128m -XX:NewSize=15m -XX:MaxNewSize=15m -Xdebug -XX:SurvivorRatio=2 -XX:TargetSurvivorRatio=90 -XX:PrintGCTimeStamps -XX:UseTLAB -XX:SoftRefLRUPolicyMSPerMB=1 -Dsun.io.useCanonCaches=false -Djava.awt.headless=true -XX:+UseParNewGC -Drdbms.driverLocation=C:/sapdb/programs/runtime/jar/sapdbc.jar
-> java vm version : 1.4.2_13-b06
-> java vm vendor : Java HotSpot(TM) Server VM (Sun Microsystems Inc.)
-> java vm type : server
-> java vm cpu : x86
-> heap size : 512M
-> init heap size : 50M
-> stack size : 2M
-> root path : F:\usr\sap\J2E\JC00\j2ee\cluster\server0
-> class path : .\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
-> OS libs path : F:\usr\sap\J2E\JC00\j2ee\os_libs
-> main class : com.sap.engine.boot.Start
-> framework class : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path : F:\usr\sap\J2E\JC00\exe\jstartup.jar;F:\usr\sap\J2E\JC00\exe\jvmx.jar
-> parameters :
-> debuggable : yes
-> debug mode : no
-> debug port : 50021
-> shutdown timeout : 120000
[Thr 3196] INFO: Invalid property value [Debbugable=yes]
[Thr 3196] [Node: SDM] java home is set by profile parameter
Java Home: C:\j2sdk1.4.2_13
[Thr 3196] Thu Dec 28 14:42:52 2006
[Thr 3196] JStartupICheckFrameworkPackage: can't find framework package F:\usr\sap\J2E\JC00\exe\jvmx.jar
JStartupIReadSection: read node properties [sdm]
-> node name : SDM
-> node type : sdm
-> node execute : yes
-> java path : C:\j2sdk1.4.2_13
-> java parameters :
-> java vm version : 1.4.2_13-b06
-> java vm vendor : Java HotSpot(TM) Server VM (Sun Microsystems Inc.)
-> java vm type : server
-> java vm cpu : x86
-> heap size : 256M
-> root path : F:\usr\sap\J2E\JC00\SDM\program
-> class path : F:\usr\sap\J2E\JC00\SDM\program\bin\SDM.jar
-> OS libs path : F:\usr\sap\J2E\JC00\j2ee\os_libs
-> main class : SDMInternal
-> framework class : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path : F:\usr\sap\J2E\JC00\exe\jstartup.jar;F:\usr\sap\J2E\JC00\exe\jvmx.jar
-> shutdown class : com.sap.sdm.jstartup.shutdown.InternalShutDown
-> parameters : server sdmhome=F:\usr\sap\J2E\JC00\SDM\program
-> debuggable : yes
-> debug mode : no
-> debug port : 60000
-> shutdown timeout : 120000
[Thr 3196] JControlMSConnect: attached to message server (lofoten/3901)
JControlStartJLaunch: program = F:\usr\sap\J2E\JC00\exe\jlaunch.exe
-> arg[00] = F:\usr\sap\J2E\JC00\exe\jlaunch.exe
-> arg[01] = pf=F:\usr\sap\J2E\SYS\profile\J2E_JC00_lofoten
-> arg[02] = -DSAPINFO=J2E_00_dispatcher
-> arg[03] = -nodeId=0
-> arg[04] = -file=F:\usr\sap\J2E\JC00\j2ee\cluster\instance.properties
-> arg[05] = -syncSem=JSTARTUP_WAIT_ON_6064
-> arg[06] = -nodeName=ID2994700
-> arg[07] = -jvmOutFile=F:\usr\sap\J2E\JC00\work\jvm_dispatcher.out
-> arg[08] = -stdOutFile=F:\usr\sap\J2E\JC00\work\std_dispatcher.out
-> arg[09] = -locOutFile=F:\usr\sap\J2E\JC00\work\dev_dispatcher
-> arg[10] = -mode=JCONTROL
-> arg[11] = pf=F:\usr\sap\J2E\SYS\profile\J2E_JC00_lofoten
-> lib path = PATH=C:\j2sdk1.4.2_13\jre\bin\server;C:\j2sdk1.4.2_13\jre\bin;c:\sapdb\programs\bin;c:\sapdb\programs\pgm;c:\windows\system32;F:\usr\sap\J2E\JC00\exe;C:\sapdb\programs\pgm;F:\usr\sap\J2E\SYS\exe\uc\NTI386
-> exe path = PATH=C:\j2sdk1.4.2_13\bin;F:\usr\sap\J2E\JC00\j2ee\os_libs;c:\sapdb\programs\bin;c:\sapdb\programs\pgm;c:\windows\system32;F:\usr\sap\J2E\JC00\exe;C:\sapdb\programs\pgm;F:\usr\sap\J2E\SYS\exe\uc\NTI386
[Thr 5792] JControlMSMessageFunc: Thread 5792 started as listener thread for ms messages.
[Thr 3196] JControlICheckProcessList: process dispatcher started (PID:5552)
JControlStartJLaunch: program = F:\usr\sap\J2E\JC00\exe\jlaunch.exe
-> arg[00] = F:\usr\sap\J2E\JC00\exe\jlaunch.exe
-> arg[01] = pf=F:\usr\sap\J2E\SYS\profile\J2E_JC00_lofoten
-> arg[02] = -DSAPINFO=J2E_00_server
-> arg[03] = -nodeId=1
-> arg[04] = -file=F:\usr\sap\J2E\JC00\j2ee\cluster\instance.properties
-> arg[05] = -syncSem=JSTARTUP_WAIT_ON_6064
-> arg[06] = -nodeName=ID2994750
-> arg[07] = -jvmOutFile=F:\usr\sap\J2E\JC00\work\jvm_server0.out
-> arg[08] = -stdOutFile=F:\usr\sap\J2E\JC00\work\std_server0.out
-> arg[09] = -locOutFile=F:\usr\sap\J2E\JC00\work\dev_server0
-> arg[10] = -mode=JCONTROL
-> arg[11] = pf=F:\usr\sap\J2E\SYS\profile\J2E_JC00_lofoten
-> lib path = PATH=C:\j2sdk1.4.2_13\jre\bin\server;C:\j2sdk1.4.2_13\jre\bin;c:\sapdb\programs\bin;c:\sapdb\programs\pgm;c:\windows\system32;F:\usr\sap\J2E\JC00\exe;C:\sapdb\programs\pgm;F:\usr\sap\J2E\SYS\exe\uc\NTI386
-> exe path = PATH=C:\j2sdk1.4.2_13\bin;F:\usr\sap\J2E\JC00\j2ee\os_libs;c:\sapdb\programs\bin;c:\sapdb\programs\pgm;c:\windows\system32;F:\usr\sap\J2E\JC00\exe;C:\sapdb\programs\pgm;F:\usr\sap\J2E\SYS\exe\uc\NTI386
[Thr 3196] JControlICheckProcessList: process server0 started (PID:6052)
JControlStartJLaunch: program = F:\usr\sap\J2E\JC00\exe\jlaunch.exe
-> arg[00] = F:\usr\sap\J2E\JC00\exe\jlaunch.exe
-> arg[01] = pf=F:\usr\sap\J2E\SYS\profile\J2E_JC00_lofoten
-> arg[02] = -DSAPINFO=J2E_00_sdm
-> arg[03] = -nodeId=2
-> arg[04] = -file=F:\usr\sap\J2E\JC00\SDM\program\config\sdm_jstartup.properties
-> arg[05] = -syncSem=JSTARTUP_WAIT_ON_6064
-> arg[06] = -nodeName=sdm
-> arg[07] = -jvmOutFile=F:\usr\sap\J2E\JC00\work\jvm_sdm.out
-> arg[08] = -stdOutFile=F:\usr\sap\J2E\JC00\work\std_sdm.out
-> arg[09] = -locOutFile=F:\usr\sap\J2E\JC00\work\dev_sdm
-> arg[10] = -mode=JCONTROL
-> arg[11] = pf=F:\usr\sap\J2E\SYS\profile\J2E_JC00_lofoten
-> lib path = PATH=C:\j2sdk1.4.2_13\jre\bin\server;C:\j2sdk1.4.2_13\jre\bin;c:\sapdb\programs\bin;c:\sapdb\programs\pgm;c:\windows\system32;F:\usr\sap\J2E\JC00\exe;C:\sapdb\programs\pgm;F:\usr\sap\J2E\SYS\exe\uc\NTI386
-> exe path = PATH=C:\j2sdk1.4.2_13\bin;F:\usr\sap\J2E\JC00\j2ee\os_libs;c:\sapdb\programs\bin;c:\sapdb\programs\pgm;c:\windows\system32;F:\usr\sap\J2E\JC00\exe;C:\sapdb\programs\pgm;F:\usr\sap\J2E\SYS\exe\uc\NTI386
[Thr 3196] JControlICheckProcessList: process SDM started (PID:5716)
[Thr 3196] JControlMSSendLogon: delete SDM logon information (rc=0)
[Thr 3196] Thu Dec 28 14:43:02 2006
[Thr 3196] JControlMSSendLogon: insert SDM logon information (port=50018; rc=0)
[Thr 3196] Thu Dec 28 15:13:02 2006
[Thr 3196] JControlICheckProcessList: process server0 (pid:6052) died (RUN-FLAG)
[Thr 3196] JControlIResetProcess: reset process server0
[Thr 3196] JControlIResetProcess: [server0] not running -> increase error count (1)
[Thr 3196] JControlICheckProcessList: running flight recorder:
C:\j2sdk1.4.2_13\bin\java -classpath ../j2ee/cluster/bootstrap/sap.comtcbloffline_launcherimpl.jar com.sap.engine.offline.OfflineToolStart com.sap.engine.flightrecorder.core.Collector ../j2ee/cluster/bootstrap -node ID2994750 1167313372 -bz F:\usr\sap\J2E\SYS\global
JControlStartJLaunch: program = F:\usr\sap\J2E\JC00\exe\jlaunch.exe
-> arg[00] = F:\usr\sap\J2E\JC00\exe\jlaunch.exe
-> arg[01] = pf=F:\usr\sap\J2E\SYS\profile\J2E_JC00_lofoten
-> arg[02] = -DSAPINFO=J2E_00_server
-> arg[03] = -nodeId=1
-> arg[04] = -file=F:\usr\sap\J2E\JC00\j2ee\cluster\instance.properties
-> arg[05] = -syncSem=JSTARTUP_WAIT_ON_6064
-> arg[06] = -nodeName=ID2994750
-> arg[07] = -jvmOutFile=F:\usr\sap\J2E\JC00\work\jvm_server0.out
-> arg[08] = -jvmOutMode=append
-> arg[09] = -stdOutFile=F:\usr\sap\J2E\JC00\work\std_server0.out
-> arg[10] = -stdOutMode=append
-> arg[11] = -traceMode=append
-> arg[12] = -locOutFile=F:\usr\sap\J2E\JC00\work\dev_server0
-> arg[13] = -mode=JCONTROL
-> arg[14] = pf=F:\usr\sap\J2E\SYS\profile\J2E_JC00_lofoten
-> lib path = PATH=C:\j2sdk1.4.2_13\jre\bin\server;C:\j2sdk1.4.2_13\jre\bin;c:\sapdb\programs\bin;c:\sapdb\programs\pgm;c:\windows\system32;F:\usr\sap\J2E\JC00\exe;C:\sapdb\programs\pgm;F:\usr\sap\J2E\SYS\exe\uc\NTI386
-> exe path = PATH=C:\j2sdk1.4.2_13\bin;F:\usr\sap\J2E\JC00\j2ee\os_libs;c:\sapdb\programs\bin;c:\sapdb\programs\pgm;c:\windows\system32;F:\usr\sap\J2E\JC00\exe;C:\sapdb\programs\pgm;F:\usr\sap\J2E\SYS\exe\uc\NTI386
[Thr 3196] JControlICheckProcessList: process server0 started (PID:6008)
[Thr 3196] Thu Dec 28 15:13:07 2006
[Thr 3196] JControlICheckProcessList: process dispatcher (pid:5552) died (RUN-FLAG)
[Thr 3196] JControlIResetProcess: reset process dispatcher
[Thr 3196] JControlIResetProcess: [dispatcher] not running -> increase error count (1)
[Thr 3196] JControlICheckProcessList: running flight recorder:
C:\j2sdk1.4.2_13\bin\java -classpath ../j2ee/cluster/bootstrap/sap.comtcbloffline_launcherimpl.jar com.sap.engine.offline.OfflineToolStart com.sap.engine.flightrecorder.core.Collector ../j2ee/cluster/bootstrap -node ID2994700 1167313372 -bz F:\usr\sap\J2E\SYS\global
JControlStartJLaunch: program = F:\usr\sap\J2E\JC00\exe\jlaunch.exe
-> arg[00] = F:\usr\sap\J2E\JC00\exe\jlaunch.exe
-> arg[01] = pf=F:\usr\sap\J2E\SYS\profile\J2E_JC00_lofoten
-> arg[02] = -DSAPINFO=J2E_00_dispatcher
-> arg[03] = -nodeId=0
-> arg[04] = -file=F:\usr\sap\J2E\JC00\j2ee\cluster\instance.properties
-> arg[05] = -syncSem=JSTARTUP_WAIT_ON_6064
-> arg[06] = -nodeName=ID2994700
-> arg[07] = -jvmOutFile=F:\usr\sap\J2E\JC00\work\jvm_dispatcher.out
-> arg[08] = -jvmOutMode=append
-> arg[09] = -stdOutFile=F:\usr\sap\J2E\JC00\work\std_dispatcher.out
-> arg[10] = -stdOutMode=append
-> arg[11] = -traceMode=append
-> arg[12] = -locOutFile=F:\usr\sap\J2E\JC00\work\dev_dispatcher
-> arg[13] = -mode=JCONTROL
-> arg[14] = pf=F:\usr\sap\J2E\SYS\profile\J2E_JC00_lofoten
-> lib path = PATH=C:\j2sdk1.4.2_13\jre\bin\server;C:\j2sdk1.4.2_13\jre\bin;c:\sapdb\programs\bin;c:\sapdb\programs\pgm;c:\windows\system32;F:\usr\sap\J2E\JC00\exe;C:\sapdb\programs\pgm;F:\usr\sap\J2E\SYS\exe\uc\NTI386
-> exe path = PATH=C:\j2sdk1.4.2_13\bin;F:\usr\sap\J2E\JC00\j2ee\os_libs;c:\sapdb\programs\bin;c:\sapdb\programs\pgm;c:\windows\system32;F:\usr\sap\J2E\JC00\exe;C:\sapdb\programs\pgm;F:\usr\sap\J2E\SYS\exe\uc\NTI386
[Thr 3196] JControlICheckProcessList: process dispatcher started (PID:5400)
[Thr 3196] JControlICheckProcessList: process SDM (pid:5716) died (RUN-FLAG)
[Thr 3196] JControlIResetProcess: reset process SDM
[Thr 3196] JControlICheckProcessList: running flight recorder:
C:\j2sdk1.4.2_13\bin\java -classpath ../j2ee/cluster/bootstrap/sap.comtcbloffline_launcherimpl.jar com.sap.engine.offline.OfflineToolStart com.sap.engine.flightrecorder.core.Collector ../j2ee/cluster/bootstrap -node sdm 1167313372 -bz F:\usr\sap\J2E\SYS\global
JControlStartJLaunch: program = F:\usr\sap\J2E\JC00\exe\jlaunch.exe
-> arg[00] = F:\usr\sap\J2E\JC00\exe\jlaunch.exe
-> arg[01] = pf=F:\usr\sap\J2E\SYS\profile\J2E_JC00_lofoten
-> arg[02] = -DSAPINFO=J2E_00_sdm
-> arg[03] = -nodeId=2
-> arg[04] = -file=F:\usr\sap\J2E\JC00\SDM\program\config\sdm_jstartup.properties
-> arg[05] = -syncSem=JSTARTUP_WAIT_ON_6064
-> arg[06] = -nodeName=sdm
-> arg[07] = -jvmOutFile=F:\usr\sap\J2E\JC00\work\jvm_sdm.out
-> arg[08] = -jvmOutMode=append
-> arg[09] = -stdOutFile=F:\usr\sap\J2E\JC00\work\std_sdm.out
-> arg[10] = -stdOutMode=append
-> arg[11] = -traceMode=append
-> arg[12] = -locOutFile=F:\usr\sap\J2E\JC00\work\dev_sdm
-> arg[13] = -mode=JCONTROL
-> arg[14] = pf=F:\usr\sap\J2E\SYS\profile\J2E_JC00_lofoten
-> lib path = PATH=C:\j2sdk1.4.2_13\jre\bin\server;C:\j2sdk1.4.2_13\jre\bin;c:\sapdb\programs\bin;c:\sapdb\programs\pgm;c:\windows\system32;F:\usr\sap\J2E\JC00\exe;C:\sapdb\programs\pgm;F:\usr\sap\J2E\SYS\exe\uc\NTI386
-> exe path = PATH=C:\j2sdk1.4.2_13\bin;F:\usr\sap\J2E\JC00\j2ee\os_libs;c:\sapdb\programs\bin;c:\sapdb\programs\pgm;c:\windows\system32;F:\usr\sap\J2E\JC00\exe;C:\sapdb\programs\pgm;F:\usr\sap\J2E\SYS\exe\uc\NTI386
[Thr 3196] JControlICheckProcessList: process SDM started (PID:2952)
[Thr 3196] Thu Dec 28 15:13:17 2006
[Thr 3196] JControlICheckProcessList: process server0 (pid:6008) died (RUN-FLAG)
[Thr 3196] JControlIResetProcess: reset process server0
[Thr 3196] JControlIResetProcess: [server0] not running -> increase error count (2)
[Thr 3196] JControlICheckProcessList: running flight recorder:
C:\j2sdk1.4.2_13\bin\java -classpath ../j2ee/cluster/bootstrap/sap.comtcbloffline_launcherimpl.jar com.sap.engine.offline.OfflineToolStart com.sap.engine.flightrecorder.core.Collector ../j2ee/cluster/bootstrap -node ID2994750 1167315182 -bz F:\usr\sap\J2E\SYS\global
JControlStartJLaunch: program = F:\usr\sap\J2E\JC00\exe\jlaunch.exe
-> arg[00] = F:\usr\sap\J2E\JC00\exe\jlaunch.exe
-> arg[01] = pf=F:\usr\sap\J2E\SYS\profile\J2E_JC00_lofoten
-> arg[02] = -DSAPINFO=J2E_00_server
-> arg[03] = -nodeId=1
-> arg[04] = -file=F:\usr\sap\J2E\JC00\j2ee\cluster\instance.properties
-> arg[05] = -syncSem=JSTARTUP_WAIT_ON_6064
-> arg[06] = -nodeName=ID2994750
-> arg[07] = -jvmOutFile=F:\usr\sap\J2E\JC00\work\jvm_server0.out
-> arg[08] = -jvmOutMode=append
-> arg[09] = -stdOutFile=F:\usr\sap\J2E\JC00\work\std_server0.out
-> arg[10] = -stdOutMode=append
-> arg[11] = -traceMode=append
-> arg[12] = -locOutFile=F:\usr\sap\J2E\JC00\work\dev_server0
-> arg[13] = -mode=JCONTROL
-> arg[14] = pf=F:\usr\sap\J2E\SYS\profile\J2E_JC00_lofoten
-> lib path = PATH=C:\j2sdk1.4.2_13\jre\bin\server;C:\j2sdk1.4.2_13\jre\bin;c:\sapdb\programs\bin;c:\sapdb\programs\pgm;c:\windows\system32;F:\usr\sap\J2E\JC00\exe;C:\sapdb\programs\pgm;F:\usr\sap\J2E\SYS\exe\uc\NTI386
-> exe path = PATH=C:\j2sdk1.4.2_13\bin;F:\usr\sap\J2E\JC00\j2ee\os_libs;c:\sapdb\programs\bin;c:\sapdb\programs\pgm;c:\windows\system32;F:\usr\sap\J2E\JC00\exe;C:\sapdb\programs\pgm;F:\usr\sap\J2E\SYS\exe\uc\NTI386
[Thr 3196] Thu Dec 28 15:13:18 2006
[Thr 3196] JControlICheckProcessList: process server0 started (PID:3044)
[Thr 3196] Thu Dec 28 15:13:23 2006
[Thr 3196] JControlICheckProcessList: process dispatcher (pid:5400) died (RUN-FLAG)
[Thr 3196] JControlIResetProcess: reset process dispatcher
[Thr 3196] JControlIResetProcess: [dispatcher] not running -> increase error count (2)
[Thr 3196] JControlICheckProcessList: running flight recorder:
C:\j2sdk1.4.2_13\bin\java -classpath ../j2ee/cluster/bootstrap/sap.comtcbloffline_launcherimpl.jar com.sap.engine.offline.OfflineToolStart com.sap.engine.flightrecorder.core.Collector ../j2ee/cluster/bootstrap -node ID2994700 1167315187 -bz F:\usr\sap\J2E\SYS\global
JControlStartJLaunch: program = F:\usr\sap\J2E\JC00\exe\jlaunch.exe
-> arg[00] = F:\usr\sap\J2E\JC00\exe\jlaunch.exe
-> arg[01] = pf=F:\usr\sap\J2E\SYS\profile\J2E_JC00_lofoten
-> arg[02] = -DSAPINFO=J2E_00_dispatcher
-> arg[03] = -nodeId=0
-> arg[04] = -file=F:\usr\sap\J2E\JC00\j2ee\cluster\instance.properties
-> arg[05] = -syncSem=JSTARTUP_WAIT_ON_6064
-> arg[06] = -nodeName=ID2994700
-> arg[07] = -jvmOutFile=F:\usr\sap\J2E\JC00\work\jvm_dispatcher.out
-> arg[08] = -jvmOutMode=append
-> arg[09] = -stdOutFile=F:\usr\sap\J2E\JC00\work\std_dispatcher.out
-> arg[10] = -stdOutMode=append
-> arg[11] = -traceMode=append
-> arg[12] = -locOutFile=F:\usr\sap\J2E\JC00\work\dev_dispatcher
-> arg[13] = -mode=JCONTROL
-> arg[14] = pf=F:\usr\sap\J2E\SYS\profile\J2E_JC00_lofoten
-> lib path = PATH=C:\j2sdk1.4.2_13\jre\bin\server;C:\j2sdk1.4.2_13\jre\bin;c:\sapdb\programs\bin;c:\sapdb\programs\pgm;c:\windows\system32;F:\usr\sap\J2E\JC00\exe;C:\sapdb\programs\pgm;F:\usr\sap\J2E\SYS\exe\uc\NTI386
-> exe path = PATH=C:\j2sdk1.4.2_13\bin;F:\usr\sap\J2E\JC00\j2ee\os_libs;c:\sapdb\programs\bin;c:\sapdb\programs\pgm;c:\windows\system32;F:\usr\sap\J2E\JC00\exe;C:\sapdb\programs\pgm;F:\usr\sap\J2E\SYS\exe\uc\NTI386
[Thr 3196] JControlICheckProcessList: process dispatcher started (PID:2752)
[Thr 3196] JControlICheckProcessList: process SDM (pid:2952) died (RUN-FLAG)
[Thr 3196] JControlIResetProcess: reset process SDM
[Thr 3196] JControlIResetProcess: [SDM] wasn't stable (rt: 16 sec < 120 sec) -> increase error count (1)
[Thr 3196] JControlICheckProcessList: running flight recorder:
C:\j2sdk1.4.2_13\bin\java -classpath ../j2ee/cluster/bootstrap/sap.comtcbloffline_launcherimpl.jar com.sap.engine.offline.OfflineToolStart com.sap.engine.flightrecorder.core.Collector ../j2ee/cluster/bootstrap -node sdm 1167315187 -bz F:\usr\sap\J2E\SYS\global
JControlStartJLaunch: program = F:\usr\sap\J2E\JC00\exe\jlaunch.exe
-> arg[00] = F:\usr\sap\J2E\JC00\exe\jlaunch.exe
-> arg[01] = pf=F:\usr\sap\J2E\SYS\profile\J2E_JC00_lofoten
-> arg[02] = -DSAPINFO=J2E_00_sdm
-> arg[03] = -nodeId=2
-> arg[04] = -file=F:\usr\sap\J2E\JC00\SDM\program\config\sdm_jstartup.properties
-> arg[05] = -syncSem=JSTARTUP_WAIT_ON_6064
-> arg[06] = -nodeName=sdm
-> arg[07] = -jvmOutFile=F:\usr\sap\J2E\JC00\work\jvm_sdm.out
-> arg[08] = -jvmOutMode=append
-> arg[09] = -stdOutFile=F:\usr\sap\J2E\JC00\work\std_sdm.out
-> arg[10] = -stdOutMode=append
-> arg[11] = -traceMode=append
-> arg[12] = -locOutFile=F:\usr\sap\J2E\JC00\work\dev_sdm
-> arg[13] = -mode=JCONTROL
-> arg[14] = pf=F:\usr\sap\J2E\SYS\profile\J2E_JC00_lofoten
-> lib path = PATH=C:\j2sdk1.4.2_13\jre\bin\server;C:\j2sdk1.4.2_13\jre\bin;c:\sapdb\programs\bin;c:\sapdb\programs\pgm;c:\windows\system32;F:\usr\sap\J2E\JC00\exe;C:\sapdb\programs\pgm;F:\usr\sap\J2E\SYS\exe\uc\NTI386
-> exe path = PATH=C:\j2sdk1.4.2_13\bin;F:\usr\sap\J2E\JC00\j2ee\os_libs;c:\sapdb\programs\bin;c:\sapdb\programs\pgm;c:\windows\system32;F:\usr\sap\J2E\JC00\exe;C:\sapdb\programs\pgm;F:\usr\sap\J2E\SYS\exe\uc\NTI386
[Thr 3196] JControlICheckProcessList: process SDM started (PID:4500)
[Thr 3196] Thu Dec 28 15:13:28 2006
[Thr 3196] JControlICheckProcessList: process server0 (pid:3044) died (RUN-FLAG)
[Thr 3196] JControlIResetProcess: reset process server0
[Thr 3196] JControlIResetProcess: [server0] not running -> increase error count (3)
[Thr 3196] JControlICheckProcessList: running flight recorder:
C:\j2sdk1.4.2_13\bin\java -classpath ../j2ee/cluster/bootstrap/sap.comtcbloffline_launcherimpl.jar com.sap.engine.offline.OfflineToolStart com.sap.engine.flightrecorder.core.Collector ../j2ee/cluster/bootstrap -node ID2994750 1167315198 -bz F:\usr\sap\J2E\SYS\global
JControlStartJLaunch: program = F:\usr\sap\J2E\JC00\exe\jlaunch.exe
-> arg[00] = F:\usr\sap\J2E\JC00\exe\jlaunch.exe
-> arg[01] = pf=F:\usr\sap\J2E\SYS\profile\J2E_JC00_lofoten
-> arg[02] = -DSAPINFO=J2E_00_server
-> arg[03] = -nodeId=1
-> arg[04] = -file=F:\usr\sap\J2E\JC00\j2ee\cluster\instance.properties
-> arg[05] = -syncSem=JSTARTUP_WAIT_ON_6064
-> arg[06] = -nodeName=ID2994750
-> arg[07] = -jvmOutFile=F:\usr\sap\J2E\JC00\work\jvm_server0.out
-> arg[08] = -jvmOutMode=append
-> arg[09] = -stdOutFile=F:\usr\sap\J2E\JC00\work\std_server0.out
-> arg[10] = -stdOutMode=append
-> arg[11] = -traceMode=append
-> arg[12] = -locOutFile=F:\usr\sap\J2E\JC00\work\dev_server0
-> arg[13] = -mode=JCONTROL
-> arg[14] = pf=F:\usr\sap\J2E\SYS\profile\J2E_JC00_lofoten
-> lib path = PATH=C:\j2sdk1.4.2_13\jre\bin\server;C:\j2sdk1.4.2_13\jre\bin;c:\sapdb\programs\bin;c:\sapdb\programs\pgm;c:\windows\system32;F:\usr\sap\J2E\JC00\exe;C:\sapdb\programs\pgm;F:\usr\sap\J2E\SYS\exe\uc\NTI386
-> exe path = PATH=C:\j2sdk1.4.2_13\bin;F:\usr\sap\J2E\JC00\j2ee\os_libs;c:\sapdb\programs\bin;c:\sapdb\programs\pgm;c:\windows\system32;F:\usr\sap\J2E\JC00\exe;C:\sapdb\programs\pgm;F:\usr\sap\J2E\SYS\exe\uc\NTI386
[Thr 3196] Thu Dec 28 15:13:29 2006
[Thr 3196] JControlICheckProcessList: process server0 started (PID:2140)
[Thr 3196] Thu Dec 28 15:13:39 2006
[Thr 3196] JControlICheckProcessList: process SDM (pid:4500) died (RUN-FLAG)
[Thr 3196] JControlIResetProcess: reset process SDM
[Thr 3196] JControlIResetProcess: [SDM] wasn't stable (rt: 16 sec < 120 sec) -> increase error count (2)
[Thr 3196] JControlICheckProcessList: running flight recorder:
C:\j2sdk1.4.2_13\bin\java -classpath ../j2ee/cluster/bootstrap/sap.comtcbloffline_launcherimpl.jar com.sap.engine.offline.OfflineToolStart com.sap.engine.flightrecorder.core.Collector ../j2ee/cluster/bootstrap -node sdm 1167315203 -bz F:\usr\sap\J2E\SYS\global
JControlStartJLaunch: program = F:\usr\sap\J2E\JC00\exe\jlaunch.exe
-> arg[00] = F:\usr\sap\J2E\JC00\exe\jlaunch.exe
-> arg[01] = pf=F:\usr\sap\J2E\SYS\profile\J2E_JC00_lofoten
-> arg[02] = -DSAPINFO=J2E_00_sdm
-> arg[03] = -nodeId=2
-> arg[04] = -file=F:\usr\sap\J2E\JC00\SDM\program\config\sdm_jstartup.properties
-> arg[05] = -syncSem=JSTARTUP_WAIT_ON_6064
-> arg[06] = -nodeName=sdm
-> arg[07] = -jvmOutFile=F:\usr\sap\J2E\JC00\work\jvm_sdm.out
-> arg[08] = -jvmOutMode=append
-> arg[09] = -stdOutFile=F:\usr\sap\J2E\JC00\work\std_sdm.out
-> arg[10] = -stdOutMode=append
-> arg[11] = -traceMode=append
-> arg[12] = -locOutFile=F:\usr\sap\J2E\JC00\work\dev_sdm
-> arg[13] = -mode=JCONTROL
-> arg[14] = pf=F:\usr\sap\J2E\SYS\profile\J2E_JC00_lofoten
-> lib path = PATH=C:\j2sdk1.4.2_13\jre\bin\server;C:\j2sdk1.4.2_13\jre\bin;c:\sapdb\programs\bin;c:\sapdb\programs\pgm;c:\windows\system32;F:\usr\sap\J2E\JC00\exe;C:\sapdb\programs\pgm;F:\usr\sap\J2E\SYS\exe\uc\NTI386
-> exe path = PATH=C:\j2sdk1.4.2_13\bin;F:\usr\sap\J2E\JC00\j2ee\os_libs;c:\sapdb\programs\bin;c:\sapdb\programs\pgm;c:\windows\system32;F:\usr\sap\J2E\JC00\exe;C:\sapdb\programs\pgm;F:\usr\sap\J2E\SYS\exe\uc\NTI386
[Thr 3196] JControlICheckProcessList: process SDM started (PID:4912)
[Thr 3196] Thu Dec 28 15:13:44 2006
[Thr 3196] JControlICheckProcessList: process dispatcher (pid:2752) died (RUN-FLAG)
[Thr 3196] JControlIResetProcess: reset process dispatcher
[Thr 3196] JControlIResetProcess: [dispatcher] not running -> increase error count (3)
[Thr 3196] JControlICheckProcessList: running flight recorder:
C:\j2sdk1.4.2_13\bin\java -classpath ../j2ee/cluster/bootstrap/sap.comtcbloffline_launcherimpl.jar com.sap.engine.offline.OfflineToolStart com.sap.engine.flightrecorder.core.Collector ../j2ee/cluster/bootstrap -node ID2994700 1167315203 -bz F:\usr\sap\J2E\SYS\global
JControlStartJLaunch: program = F:\usr\sap\J2E\JC00\exe\jlaunch.exe
-> arg[00] = F:\usr\sap\J2E\JC00\exe\jlaunch.exe
-> arg[01] = pf=F:\usr\sap\J2E\SYS\profile\J2E_JC00_lofoten
-> arg[02] = -DSAPINFO=J2E_00_dispatcher
-> arg[03] = -nodeId=0
-> arg[04] = -file=F:\usr\sap\J2E\JC00\j2ee\cluster\instance.properties
-> arg[05] = -syncSem=JSTARTUP_WAIT_ON_6064
-> arg[06] = -nodeName=ID2994700
-> arg[07] = -jvmOutFile=F:\usr\sap\J2E\JC00\work\jvm_dispatcher.out
-> arg[08] = -jvmOutMode=append
-> arg[09] = -stdOutFile=F:\usr\sap\J2E\JC00\work\std_dispatcher.out
-> arg[10] = -stdOutMode=append
-> arg[11] = -traceMode=append
-> arg[12] = -locOutFile=F:\usr\sap\J2E\JC00\work\dev_dispatcher
-> arg[13] = -mode=JCONTROL
-> arg[14] = pf=F:\usr\sap\J2E\SYS\profile\J2E_JC00_lofoten
-> lib path = PATH=C:\j2sdk1.4.2_13\jre\bin\server;C:\j2sdk1.4.2_13\jre\bin;c:\sapdb\programs\bin;c:\sapdb\programs\pgm;c:\windows\system32;F:\usr\sap\J2E\JC00\exe;C:\sapdb\programs\pgm;F:\usr\sap\J2E\SYS\exe\uc\NTI386
-> exe path = PATH=C:\j2sdk1.4.2_13\bin;F:\usr\sap\J2E\JC00\j2ee\os_libs;c:\sapdb\programs\bin;c:\sapdb\programs\pgm;c:\windows\system32;F:\usr\sap\J2E\JC00\exe;C:\sapdb\programs\pgm;F:\usr\sap\J2E\SYS\exe\uc\NTI386
[Thr 3196] JControlICheckProcessList: process dispatcher started (PID:3496)
[Thr 5792] Thu Dec 28 15:14:03 2006
[Thr 5792] ***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4235]
[Thr 5792] *** ERROR => NiIRead: SiRecv failed for hdl 0 / sock 1748
(SI_ECONN_BROKEN; I4; ST; 192.168.0.6:3901) [nixxi.cpp 4235]
[Thr 5792] ***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4235]
[Thr 5792] *** ERROR => NiIRead: SiRecv failed for hdl 0 / sock 1748
(SI_ECONN_BROKEN; I4; ST; 192.168.0.6:3901) [nixxi.cpp 4235]
[Thr 5792] *** ERROR => MsINiRead: NiBufReceive failed (NIECONN_BROKEN) [msxxi.c 2515]
[Thr 5792] *** ERROR => MsIReadFromHdl: NiRead (rc=NIECONN_BROKEN) [msxxi.c 1677]
[Thr 5792] Thu Dec 28 15:14:04 2006
[Thr 5792] ***LOG Q0I=> NiPConnect2: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 2764]
[Thr 5792] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 0 / sock 1748
(SI_ECONN_REFUSE; I4; ST; 192.168.0.6:3901) [nixxi.cpp 2764]
[Thr 5792] *** ERROR => MsIAttachEx: NiBufConnect to lofoten/3901 failed (rc=NIECONN_REFUSED) [msxxi.c 652]
[Thr 5792] *** WARNING => Can't reconnect to message server (lofoten/3901) [rc = -100]-> reconnect [jcntrms.c 368]
[Thr 3196] Thu Dec 28 15:14:09 2006
[Thr 3196] JControlICheckProcessList: process server0 (pid:2140) died (RUN-FLAG)
[Thr 3196] JControlIResetProcess: reset process server0
[Thr 3196] JControlIResetProcess: [server0] not running -> increase error count (4)
[Thr 3196] JControlICheckProcessList: running flight recorder:
C:\j2sdk1.4.2_13\bin\java -classpath ../j2ee/cluster/bootstrap/sap.comtcbloffline_launcherimpl.jar com.sap.engine.offline.OfflineToolStart com.sap.engine.flightrecorder.core.Collector ../j2ee/cluster/bootstrap -node ID2994750 1167315209 -bz F:\usr\sap\J2E\SYS\global
[Thr 5792] Thu Dec 28 15:14:10 2006
[Thr 5792] ***LOG Q0I=> NiPConnect2: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 2764]
[Thr 5792] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 0 / sock 1712
(SI_ECONN_REFUSE; I4; ST; 192.168.0.6:3901) [nixxi.cpp 2764]
[Thr 5792] *** ERROR => MsIAttachEx: NiBufConnect to lofoten/3901 failed (rc=NIECONN_REFUSED) [msxxi.c 652]
[Thr 5792] *** WARNING => Can't reconnect to message server (lofoten/3901) [rc = -100]-> reconnect [jcntrms.c 368]
[Thr 3196] Thu Dec 28 15:14:14 2006
[Thr 3196] JControlICheckProcessList: process dispatcher (pid:3496) died (RUN-FLAG)
[Thr 3196] JControlIResetProcess: reset process dispatcher
[Thr 3196] JControlIResetProcess: [dispatcher] not running -> increase error count (4)
[Thr 3196] JControlICheckProcessList: running flight recorder:
C:\j2sdk1.4.2_13\bin\java -classpath ../j2ee/cluster/bootstrap/sap.comtcbloffline_launcherimpl.jar com.sap.engine.offline.OfflineToolStart com.sap.engine.flightrecorder.core.Collector ../j2ee/cluster/bootstrap -node ID2994700 1167315224 -bz F:\usr\sap\J2E\SYS\global
I still don't unbderstand what is my problem...
Thanks inb advance for your help
Best regards
Jean-Guillaume LALANNEHi,
you'll need at least XP Professional, as XP Home does not allow for different user groups than the predefined, and the installer creates additional groups, or fails, in case of XP Home
Regards,
Armin -
I've been using Preview in the past with no problem. I am the only user on this computer.
When I double click a picture and it open in Preview, I make changes and try to save--It says I don't have permission to do this!!
First I repaired permissions on the HD
Did not help
I right clicked on a picture went to Get Indo and changed the permission to Read & Write.
Did not see away to save so closed it. (I did unlock at the beginning)
Anyone help please.
Larry BIs this one picture or all pictures? If the picture is in your home/user folders, see below.
You may need to rebuild permissions on your user account. To do this,boot to your Recovery partition (holding down the Command and R keys while booting) and open Terminal from the Utilities menu. In Terminal, type: ‘resetpassword’ (without the ’s), hit return, and select the admin user. You are not going to reset your password. Click on the icon for your Macs hard drive at the top. From the drop down below it select the user account which is having issues. At the bottom of the window, you'll see an area labeled Restore Home Directory Permissions and ACLs. Click the reset button there. The process takes a few minutes. When complete, restart.
Repair User Permissions -
Selecting Multiple Objects with Output Preview Causing Problems
I'm trying to edit a PDF and need to select multiple objects. Without Output Preview open, I can easily select all the items I need using the shift key. With Output Preview open, whenever I try to select the second object, Output Preview creates a sticky note, instead of selecting the second object.
I am also using the PitStop Pro plug-in.
Any idea how to correct this problem? Thanks!Unfortunately it seems that the new sticky note feature with the output preview in Acrobat XI uses the same keyboard shortcut as multiple selection tool in Pitstop (shift).
Closing the output preview is the easiest way to get around this issue.
We could consider changing the key for multiple selection in PitStop, but 'shift' is pretty much a default, so what could we change it too?
If anyone has any thoughts could they email me, I am the product manager responsible for Pitstop at Enfocus and my email is '[email protected]'
All feedback gratefully received. -
Bridge CS6 CR2 preview display problem
Whilst I can see CR2 (Canon 5D mk 3) files in the main display field, hitting the space bar only shows a 'CR2' icon. what's best action.
What's the fix for this?
It might be cache related, can you select a CR2 thumb that shows good in the preview panel and then with right mouse click choose 'purge cache for selected files' and see if this solves the problem.
If not restart Bridge holding down option key (mac) or control key (Win) and from the menu choose reset preferences. -
Preview app problem, order of my images are messed up?
I don't know if this can be solved, or I need to look for a new app.
I have a lot of manga images, but they are neither "arranged" or "cleaned" by any order. I just continue to add to the folder (say "volume 1") whenever I download a new chapter. Sometimes the name of the images in the new chapter slightly differs from the previous one (usually due to change in scanlation group).
So when I "select all", and open up preview to read the manga. Preview automatically alphabatize them?? So my images are no longer in order, and I can't read them anymore.
For example, the CH1 start with "TNS_pg....", the CH2 is "TnSchp19......", and CH3 is "ShoujoCrusade_Tsuki....".
When I add them into the folder, they are in order since I don't select any arrangements.
However, PREVIEW automatically put the images from CH3 "ShoujoCrusade_Tsuki...." first when try to read it by "select all" and "open with preview"
Is there a way to just read my images as the order I put them into the folder, but not by name??
Also, if I choose "clean up by date added" etc. the newer chapters are in the front, I still can't read it.
I don't always have this problem but when I do, it's really frustrating opening up 150 images one by one so I could read my manga.
I hope I was being clear, this is my first post. THANK YOU! ~RuTony:
Welcome to the Apple Discussions. Was the photo you put on the About Me page sized to the size you wanted before you added it? If so select the photo and go to the Inspector/Metrics pane and click on the Original Size button. That will resize the photo to its original size. You can preprocess the image in your image editor of choice to the exact dimensions you want and then use the Inspector/Metrics pane to get iWeb to use those original dimensions. Even if you size the photo exactly before adding to the page it will always be resized a ittle by iWeb. That's why you need to use the Graphics pane to get it back to the original size. That may clear it up for you.
OT -
Hello, so I have an issue with preview monitor in Premiere Elements 10.
Video I am editing only shows when I click into the monitor, If I want to play the whole thing than the frame is frozen and audio plays fine.
I've reinstalled everything to double check, even OS Win7. Problem still exists. This makes the editing just not possible.
This problem is aslo happening with all video formats(avi,mp4,mov,png, even jpg). The only thig that seems to work is content generated within premiere(bars,titles,color backgrounds).
Thanks for any help.Karandeep
I did not write the "same" thing. Let me explain.
I cannot explain how protomace found your "preferences" directions and what was found. But, you are not going to find the Premiere Elements settings file (aka preferences) by the route that you posted. For the advantage of this user and others reading this thread, I thought it important to call attention to this.
Specifically
1. You wrote
Go to below mentioned location and reset the folder named as 10.0 and try to launch premier elements
c:\Users\[username]\AppData\Roaming\Adobe\Premiere Elements 10.0/10.0
There is no Premiere Elements 10.0 Folder in the correct route.
In that Adobe Folder in that above path, there is a folder named Premiere Elements 10.0 which also contains a 10.0 Folder, but that is not where you want to be if you are interested in settings file (aka preferences).
2. I thought that you might want the opportunity to be more specific for the benefit of this user and others who might read your post(s).
a. "reset" was not defined by you
b. other as per my post 5.
Thanks for the opportunity to clarify these points for you.
Please do not hesitate to ask if you have further questions on this. Please double check the path that you cited versus the one that I did and compare. With the path that you gave, I think that you would end up with a Trace Database.txt file. How were you planning on resetting preferences from that?
Thank you.
ATR -
Are you experiencing the EFFECTS PREVIEW "LOCKUP" PROBLEM? Please Read!
Hello Everyone,
After continued investigation by several members of our engineering team for the past few months we have found that the Effects Preview lock-up is caused by an altered version of the Audition executable file. If you have replaced the original Audition.exe which was installed by the Audition installer (including the trial version) you will experience this side-effect. We have verified that this bug does not exist with the released version of Audition and will only occur in cases where the user has replaced the Audition.exe with this altered version.
To resolve this issue we suggest that you delete this altered Audition.exe file and replace it with the original. If this is unsuccessful we advise you to uninstall Audition and re-install with an Adobe issued serial number.
If you continue to have problems please send an email to [email protected] with an explanation of the problem, your serial number, and a copy of your Audition system information report which can be found by going to Help > About and clicking the System Info. button.
--RonI posted this in another topic, so I thought would paste it here as well.
Okay I feel I must share this with you folks even though the whole thing was an error on my part, so anyway we have by now all heard of the AA3 vst freeze problem, well last night I wiped my HD clean and did a whole new install, because I am using an AA3 upgrade from AA 1.5 I have to install both apps, so I did this last night and reinstalled both apps, and again I got the VST freeze, but the bug wasn't in AA3 something happened with 1.5, so I reinstalled 1.5 and then ran the repair wizard on 3 and I cannot get the VST freeze no matter how hard I try, when ever I went through the motions of reinstalling 3 on various comps, I never bothered to uninstall and reinstall 1.5, I realize this is more of a major user error (namely me)
but it works now! I think that perhaps for those of us using upgrades from 1.5 something down the road broke and it effected AA3 maybe a windows update or something, but man it feels good to have it up and running, Long live AA, anyway I would be curious as to how many people this is happening to are using upgrades as well. Anyway if you want more info on what I did, just ask.
Hope this helps
Peace
and to those I may have given attitude to, well the weight is lifted and I can now apologize
UPDATE, not only did this clear up my VST freeze, but also a list of other minor issues, such as disappearing presets, Sound Lag when sweeping an EQ, Compressor pops, extra long load times, clicks when recording, multi track editing issues, my total re-install solved a long list of things,
hope this helps -
Me23n Print preview display problem for specific o/p type
Hello gurus,
A small problem..
I have modified the Smartform for a specific o/p type in PO and the moved to PRD
when seeing the Print preview in me23n the Smartform is not being displayed in PRD....
all other setting in ->messages, further data in me22n are same as for other o/p types..
The poblem is only for this o/p type POs all other o/p types the print-preview is displaying the form..
suggestions required...
thnks in advancesorry dev...
hi srikar
i think there is a missing of cluster table ..
check the t-code se09
go to the customizing release request .
there is a ur updated nace release request number.
expand that request number .
see there is an another request number.
again expand it.
check whether there is a view cluster maintenance data or not?
if it is present.
expand it there u see the cluster table.
else.
u mistaked in nace transport.
regards
surender
Edited by: surender on Feb 5, 2009 12:18 PM -
Safari PDF. Preview Download Problem
I've had my Macbook Pro for about two years and have suddenly become unable to use the "Save PDF to Download Folder" option when Previewing documents in Safari. I've tried creating another account to test the problem, reseting safari and dragging the com.apple.Safari.plist preference to the desktop and reopening Safari but the problem persists. Any advice on what to try next would be amazing. Cheers.
Hi and welcome....
Quit Safari (Command + Q)
Open a Finder window. Select your Home folder from the Sidebar on the left then open the Library folder, then the Safari folder.
Move the Downloads.plist file from the Safari folder to the Trash.
Reluaunch Safari.
Carolyn -
Yosemite Preview Highlighting Problems
I use Preview all the time for school. It has been working fine on my iMac, but on my MacBook Air I've been having problems since the semester started up again on Monday.
I cannot use the right click menu inside of a PDF document to highlight material on the MBA. On my iMac, this works fine in the same PDF file (Synced via Dropbox). If I select the highlight tool from the menubar, I can highlight text, but when I click on the highlighted text, I cannot change the color of the text using the right-click menu.
I've tried restarting, clearing the com.apple.Preview files, logging in to safe mode, and creating a new user and the problem persists. Any ideas of what else I could try?I have the same problem in my MacBook Pro(Mid2012), after update 10.10.2 beta 2. Right click in Preview cannot highlight PDF, while highlight using tool bar works well. This problem prevent me from using Preview in my MacBook.
Another problem is that, after updated to Yosemite. Text inserted to pdf is not well organized. It seems that the display border of text have been changed in Preview (Yosemite). This bugs made my previous annotated pdf files look ugly, even if they are annotated by Preview (mavericks). Interestingly, these files are displayed correctly in Goodreader, PDF Expert 5, and Dropbox.
Maybe you are looking for
-
Credit Note Request with reference to an invoice
Hi All, We are creating a Credit Note Request referring an invoice. A Credit Note is then created referring to the Credit Note Request. However both the invoice and credit note shows as open items FBL5N. Please help how do we get the invoice amount t
-
Can't Get My Share Button To Work Properly.. HTML Code Difficulties
Hello I have a share button on one of my pages of my website (for facebook) but i can't seem to get the "title", "description" and "image" to work properly on the preview when its posted on peoples walls. It just seems to scan the website for informa
-
Hi Gurus, I am trying to activate the BI Content InfoObjects in Netweaver 2004s and getting a short dump. "OBJECTS_OBJREF_NOT_ASSIGNED". From ST22 the short message says"Access via 'NULL' object reference not possible." Can anybody help me on this. R
-
I have tried to delete and reinstall, but it gives me the same issue. Any suggestions? Regards Jonas
-
How do I change my compatibility for window as iTunse says it is set up for older verison?
I am unable to move CD to files in Folders that will play keep getting message Compatibility mode for older version of winds. Help