Previewing HSL & Sharpening at less than 100% on Canon 1Ds MKI

Hi, I'm new here and checked the archive for this topic with no luck.
I am experiencing a degraded preview when adjusting the parameters for HSL and Sharpen/Noise tabs in ACR 4.3.1. The adjustments appear to have a grainy artifact at 66% and less but then perfectly smooth at 100% and more. Other adjustments seem fine- exposure, white balance, etc.
I thought this might be by design at first, but this only occurs with .raw images from my 1Ds Mk1. I tried opening a few Tiff's in ACR and can't recreate the artifact.
I can live without seeing accurate sharpening at less than 100%(I usually sharpen later, anyways), but making adjustments to the luminance in HSL would require seeing more of the image to make a good judgment.
Anyone else have this issue?
Thanks,
CLD

> It has been well-documented in articles on the Internet, in white papers, in online tutorials, and in books about ACR that you need to be viewing your images at at least 100% in order to accurately evaluate clarity, noise reduction and sharpening.
I believe the OP conceded that, but thought that HSL adjustments needed to be evaluated within the context of the larger picture(?)
[Caveat: I'm not yet a user of ACR4, but to my mind HSL adjustments involve color and tone, do they not? ... Or, is the OP wrong regarding not being able to see HSL changes at <100%?]

Similar Messages

ACR6 Sharpening/NR visibility at less than 100% zoom

I am seeing that ACR in CS5 now shows sharpening and noise reduction at less than 100% zoom. Thanks for that Adobe (even though we know it's not "accurate" in the strictest sense).
Now that we have that I am curious about the interpolation method used by ACR for screen display/zoom. Is it the old PS way (the one where 25% and 50% were considered to be "better" at judging sharpness), the newer interpolation that started with PS CS4, or something entirely different?
Also, this is more of a Bridge question but I have seen at least once so far where Bridge showed me sharpening applied in ACR6 in the Bridge preview but it seems a little quirky in that it doesn't always show. Once it showed me NR but not sharpening. Is this perhaps a little buggy still or is there a special combination of the Bridge preview preferences that are needed to make it work? I have tried various combinations of the "monitor-sized previews", "100% previews", etc. and have tried to be diligent about purging the Bridge cache between changes but I can't seem to get it to display sharpening consistently in the normal preview (the loupe and full-screen at 100% or greater DO show sharpening and NR).
Thanks.

Someone needs to get busy and get OpenGL/OpenCL working in Camera Raw to accelerate resampling.
-Noel

Zoom to less than 100%?

I have trouble believing that this is impossible, but I can't figure out how to do it. Is there any way to zoom an image to less than 100% while editing? The loupe can be set to 50%, but that doesn't let me retouch the image while it's on, unless there's some method to do that that I haven't found either. And that still wouldn't let me edit at, say 25%, which I occasionally want to do, since some of my images are in the 20+ megapixel range.

I am using photos with only 10mp but I guessing that you are not seeing the whole photo, the same as if you were looking at the 10mp photo. Please correct me if I assume wrong.
When I need to edit the whole photo I just click "Z" to see/preview the whole picture and "Z" again to see/preview actual size. There is also a button at the bottom right hand corner to do the same job.
Another thing that may help is clicking Preferences~Previews and then adjust limit preview size.

I am having trouble sending bulk emails (less than 100 at a time) on my gmail account using group names created from my address book. I use Mail on my I-Mac. When I try to send out a bulk email, the message shows up that my server can't send them, etc.

I am having trouble sending bulk emails from a Mail Group (less than 100 at a time) on my gmail account. They come back saying the server can't recognize the data and try again with selected server or try later or edit message, all of which I have attempted a number of times, including re-booting the computer. I am wondering if there is something wrong in my Address Book? I have check Apple Preferences, and Mail Preferences and all seems in order. I can send to any of the individual addresses, but not in a group.
Thanks for your help.

Install ClamXav and run a scan with that. It should pick up any trojans.
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

Thick, horizontal lines appear in both source and program viewer footage set to less than 100% ...

Can anyone help?
This has suddenly started across all projects, including those I have been working on for ages with no issues. Everything else seems to be exactly the same as ever in every other application, only PP is affected. The footage is all progressive (I rarely encounter interlaced nowadays), prores HQ 25fps, usually 1080 but also 720. Output to the monitor, via MXO2 mini is fine and has not changed at all. I can't think of any updates recently, certainly not in the past week, when this started.
It's really wierd and clearly wrong, but I can't begin to work out how to fix it, having exhausted all my standard fixes (settings in app, OS, hardware etc all checked and rechecked. Reboots done - all to no effect).
My system is:
MacPro 5,1 6-core 3.33GHz
12GB RAM
GTX285 Mac GPU - CUDA 5.0.45, GPU driver 1.3.4.0 (295.00.05f03)
OSX 10.7.5
PP CS 6.0.2
MXO2 mini - latest drivers etc
Any thoughts, much appreciated!
Thanks
Dominic

Well, I seem to have fixed it but none the wiser for why I had this problem.
Fixed it by upgrading my OS to OSX 10.8.3 (always a nerve trembling experience), after cloning my boot drive etc. Then I updated CUDA to the latest version, reinstalled my Matrox drivers and crossed my fingers! Happily, everything seems to be fine now. I can only think that the problem was, maybe, something to do with CUDA, as the only time I ever had an issue was using PP and playback was at less than 100% scale.

Ms Project 2013 report for resource name, tasks less than 100% complete within a date range I can set each time

I have seen I can create a report for a resource name with a specified date range, and one that can show me for a resource name any incomplete tasks, but I want to do the following and cant work out how to state it in the report constructor:
resource name equals - {I want to set a given resource in here}
% complete is less than 100%
start - date range is between [today -7 days] and [today +7 days]
Please can someone show me how this is possible, I know it will be and it is me that has been defeated!!

workspacedesign,
Oops, my bad. I missed the point that the Name field for assignment rows will be the task name and that's not what you want. There is also a glitch in the date range filter. So, here's how to fix that.
First, in the Resource Usage view, copy the Name field to Text1. Now select the resource line and do a fill down for all assignments under that resource. Do that for each resource. This could be automated with VBA, but for now, a manual setup should work
fine.
Second, instead of testing for the Name field in the filter, test for the Text1 field.
Third, change the Finish test to be "less than or equal to".
Now when you apply that filter, enter beginning date of your range and then the ending date of your range followed by the resource name. You should get the data you want.
Unfortunately formulas in custom fields are not as flexible in Project as they are in Excel. For example, in Project a formula can only operate on data for that row. Further, even if you use the formula Today() +7 for your filter criteria, the first time
the filter is used, Project will hard code today's date into the filter. The normal way around both of these shortcomings is to use VBA.
Hope this helps.
John

Emails sent to me are sometime returned to the sender with the message "Inbox full" even though I have maybe less than 100 emails in the Inbox and I regularly compact them. How can I increase the storage space?

Question
Emails sent to me are sometime returned to the sender with the message "Inbox full" even though I have maybe less than 100 emails in the Inbox and I regularly compact them. I delete emails from the Inbox and the Sent and Trash boxes to overcome this. How can I increase the storage space to stop this happening?

Hi terrybohle1938,
Firefox is a web browser. It provides access to online content. Things like your email are handled by the content provider. Who is your email provider? You'll have better luck consulting their documentation.
That being said, deleting only email is a great way to free up space. Another option would be to purchase a "Premium" account if your email provider offers this service. Many times more storage space is offered as part of paid subscription.
Hopefully this helps!

P 3005 less than 100 pages message

Our P 3005 got a new printer cartridge but the display still says " less than 100 pages"
Is there a reset button or what should I do.
Thanks

@Markus4235
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

I have less than 100 MB left. I try using iCloud, but it seems like its not putting storage away. It says I have all 5 MB left.

I have less than 100 MB left. I try using iCloud, but it seems like its not putting storage away. It says I have all 5 MB left. Please explain.

5 GB*

Brush Opacity Less Than 100%

I am using Photoshop CC 2014. On application of a Brush stroke, the color laid down is less, far less, than the 100% that is set for Opacity and Flow. This problem does not exist with the installed Photoshop CC. Probably, if I were to guess, the opacity is about 30%. There is nothing anywhere else where the setting have been changed to cause this to happen.
This presents an intolerable situation attempting to paint with the Brush, either directly on the image or in a Mask. Amazing how it will mess up the resulting image Mask. Below is a screen capture.
I have CC 2014 installed on a laptop and a desktop. This problem occurs on both.
Both computers using Windows 7, the desktop which is primary photo/image editing computer has 16 Gb of RAM and CPU is an i7
Charles Simon

Try resetting the Brush Tool by right clicking on the Brush icon on the tool options bar and clicking on Reset Tool
If that doesn't work, i'd reset the photoshop preferences and see if that makes a difference.
Press and hold the Shift+Ctrl+Alt keys just after starting the launch of photoshop
Keep holding the keys down until you get a dialog asking if you want to delete the photoshop settings file
Press Yes

How can you fix transparency less than 100% when drawing multiple shapes with the pencil tool?

I draw a (fill only) shape at 50% with the pencil tool and when I go to draw another, the transparency jumps back to 100%. I would like it to stay at 50% for every mark I make, anyone know how? I wish to build up multiple semi-translucent vector shapes like in the attached image.
Many Thanks.
Mark

In the bottom of the Appearance Palette, toggle the (deep breath) New Art Maintains Appearance / New Art Has Basic Appearance button (pant pant).
I leave it to you to do three things:
1. Figure out which state of that stupidly-designed single button means which setting.
2. Figure out if the stupidly-designed tooltip that appears when you hover over that stupid button means:
A. ...that what the tooltip reads is the current setting, or...
B. ...that what the tooltip reads is the setting you will get if you click the stupidly-designed single button.
3. Remember what you figured out the next time you need to visit that stupidly-designed button.
Adobe doesn't understand this is a simple yes/no decision, and that a far more intuitive simple labeled checkbox will do.
JET

I try to print a 4 page site at less than 100% the first page comes out right and the others revert to 100%. How can I change this?

I am working on an iMac, OS10.6.8.
There is a certain web form that I must fill out regularly. It is long and consists of several pages. I wish to keep either a PDF or printed copy of my completed forms. I change the percentage in Page Setup and when I go to print or make the PDF the pages after page 1 revert to 100% and copy is omitted between pages 1 and 2.

You may have to crop pages to get the effect that you want. If you have the original, it would probably be easier to edit that and create a new PDF.

Unable to Print a .pdf less than 100% size

I used to be able to print out the address book at 75% or 80% to make a smaller booklet. Now it prints at 100% no matter what percent is entered.

Thanks. That used to work on my Intel Mini. I have OSX 10.6.8 on a MacBook and on an Intel Mini. Both ignore any percentage I enter. It just prints full size 8x10 pages. Maybe there's something in Preferences somewhere, but I can't find it. Or maybe a newer OSX update messed it up.

Acrobat 7.1.4 - Typewriter Text Less than 100% Opacity

Acrobat 7.1.4 - Typewriter text color suddenly changed to 52% opacity. How do I adjust preferences on Typewrite text opacity to 100%?? I cannot find any assistance in Help or in previous forum posts - Morris

This is normal. The correct measure of load is inspection-load. The CPUs being shown at 100% is becuase the threads are continously polling for new data packets.
Regards,
Sawan Gupta

Brand new hp laserjet p1102 and new toner cartridge out of toner after less than 100 prints ! ! ! !

Hi ,
I have just bought a brand new HP laserjet p1102 and a brand new toner cartridge, and within litterally 50 sheets being printed it says I am out of toner.
Please tell me what I must do to get this working again, because clearly I am not out of toner.
Thanks
Stephen

Hello , Welcome to the HP Community. I'd like to help you with the installation and printing issues you are having with your HP Laserjet Pro M201dw, on your Windows 8.1 operating system. I can certainly understand your frustration, it seems like you have attempted the install multiple times. First, I'd recommend running the Print and Scan Doctor, to see if it can resolve any errors in the software without having to re-install. If it does prompt you to re-install your software, I would suggest uninstalling all M201dw software from the Programs section of your control panel. Once that's done, do a cleanboot of your computer. You can find instructions to complete the cleanboot here: How to perform a clean boot in Windows Note: This will turn off all non-essential startup items, so if it's another program on your computer that is causing the installation to lag, it should resolve the install issue. Rather than installing from the download or the CD that came with the printer, I'd suggest downloading and running the HP Printer Install Wizard. Please respond and let me know if this helped to resolve the issue!Good luck

Previewing HSL & Sharpening at less than 100% on Canon 1Ds MKI

Similar Messages

Maybe you are looking for