Previewing mp3's in the preview panel only works for the first 3 seconds

When i click on an mp3 to preview in the panel it only plays the first few seconds or so. How can I fix this?

My appologies. I have a Win 7 PC. Adobe Bridge CC . Yes all the files work on other players. And bridge will actually play wav and af files fine, but it wont play mp3's past a few seconds. It says it's playing in the preview pannel but the audio cuts out.

Similar Messages

TS1424 i downloaded a song and it shows the time length all to be correct but while playing the song will only play for about 30 seconds then skip to the next song in my list (all lists) - in short i payed for a song that is only of a preview quality

i downloaded a song and it shows the time length all to be correct but while playing the song will only play for about 30 seconds then skip to the next song in my list (all lists) - in short i payed for a song that is only of a preview quality
Either this needs to get fixed or i will request my money back because i will not work for my money while other lie about what i spend it on.

Try deleting the problematic tune (electing to remove original file if/when prompted) and then re-downloading the file from the iTunes store.
You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option from the Quick Links section in the top right corner of the iTunes homepage in your iTunes application on your computer.
You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option at the bottom of the screen of the iTunes app (or video app on your iOS device.
If the problem re-occurs, select the content which is causing a problem and use the 'Report a problem' button in Your Purchase History using your computer.

With my i phone 4 , the Push notifications doesn't work for apps like (fb viber , whatsapp etc ) it only works for the official apps like message even when im using the phone, has this probleme with the iOs 6.0.1 and also with the iOs 6.1

With my i phone 4 , the Push notifications doesn't work for apps like (fb viber , whatsapp etc ) it only works for the official apps like message even when im using the phone, has this probleme with the iOs 6.0.1 and also with the iOs 6.1

This isn't an issue. Notice the screen prior to the one that shows usage has an iCloud section and a Manage Storage button. For this button to activate ios needs to download a few kb from icloud. Switching back to this screen forces ios to download those few kb.

Flash Player only works for the account that downloaded it

I downloaded flash player and did not specify any special preferences, however, it doesn't work for the 2 other accounts on the computer. It only runs for the Administrator account from which i downloaded it. I'm running XP professional. Can someone tell me how to fix this?

hi, i had already deleted cookies, temp internet files, etc;
i only have the IE pop up blocker and blocking level set at Medium;
it's the latest version of FP 10.0.45.2.
I installed this version a couple of weeks ago and it worked ok for all accounts (the other 2 accounts are not admin) for a week. Then, it stopped working for all accounts, i reinstalled it (some trial and error involved), then when it finally reinstalled, only works for the one account. i just tried to reinstall from one of the other accounts and error mssg said "failed to register"
Date: Sun, 6 Jun 2010 11:20:59 -0600
From: [email protected]
To: [email protected]
Subject: Flash Player only works for the account that downloaded it
Hi ol, I would go to Tools, click on Internet Options and clear the Temp files. Delete Cookies, Delete Files, including the off line content. I would do this using all accounts. Also check the history files while you are there and delete those also unless you have done so recently.
What version of Flash Player do you have Installed?
Do you use any adblock or pop up blocker software?
Thanks,
eidnolb
>

The CustomDatumExample.java only works if the Employee object has 2 attributes.

The CustomDatumExample.java only works
if the Employee object has 2 attributes -
(EmpName and EmpNo). If I try to add
another attribute to the Employee object I get java.lang.ArrayIndexOutOfBoundsException: 2 on the getAttr3 method.
Anyone know why? Thanks.
Employee object
CREATE TYPE employee AS OBJECT
(empname VARCHAR2(50), empno INTEGER,
attr3 VARCHAR2(50));
Custom object class
public class Employee implements CustomDatum, CustomDatumFactory
public static final String SQLNAME = "EMPLOYEE";
public static final int SQLTYPECODE = OracleTypes.STRUCT;
MutableStruct _struct;
static int[] _sqlType =
12, 4
static CustomDatumFactory[] _factory = new CustomDatumFactory[3];
static final Employee _EmployeeFactory = new Employee();
public static CustomDatumFactory getFactory()
return _EmployeeFactory;
/* constructor */
public Employee()
struct = new MutableStruct(new Object[3], sqlType, _factory);
/* CustomDatum interface */
public Datum toDatum(OracleConnection c) throws SQLException
return struct.toDatum(c, SQL_NAME);
/* CustomDatumFactory interface */
public CustomDatum create(Datum d, int sqlType) throws SQLException
if (d == null) return null;
Employee o = new Employee();
o._struct = new MutableStruct((STRUCT) d, sqlType, factory);
return o;
/* accessor methods */
public String getEmpname() throws SQLException
{ return (String) _struct.getAttribute(0); }
public void setEmpname(String empname) throws SQLException
{ _struct.setAttribute(0, empname); }
public Integer getEmpno() throws SQLException
{ return (Integer) _struct.getAttribute(1); }
public void setEmpno(Integer empno) throws SQLException
{ _struct.setAttribute(1, empno); }
public String getAttr3() throws SQLException
{ return (String) _struct.getAttribute(2); }
public void setAttr3(String attr3) throws SQLException
{ _struct.setAttribute(2, attr3); }
}

You also need to add an appropriate element to the _sqlType array.
In practice, it is easiest to have JPublisher regenerate the CustomDatum class when you have changed your object type definition:
jpub -user=scott/tiger -sql=EMPLOYEE:Employee

Hitting the space bar the track would only play for about one second. Then it stops.

I'm new to Soundbooth and have already a serious problem. Hitting the space bar the track would only play for about one second. Then it stops. I don't know what to do. I have the Production Suite CS5. All other applications run well.

i have the exact problem in my computer lab running macpro on 10.6.8 using CS5... this is happening in every ADOBE CS5 software using sound : soundbooth, AEX, premier pro. this is totaly ridiculous, nothing like that is happening in the other software (finalcut, finalcut xpress, audacity, soundtrack pro all are working fine) ...
i find the lack of help & replies very weird in this forum...

TS1381 The X key only works when the shift key is depressed

The X key only works when the shift key is depressed. can only type capital

I have this same issue with the Letter L. I can ony type it with a captiaL L. The Lowercase L does not work in Safari, but works in other programs.
This suggestion did not work for me.

I have the portable BOSE sound dock and after updating my ipod to ios7 the remote control of the dock only works for the volume but doesnt work for skipping songs....Is there a solution to this?

I have the portable BOSE sound dock and after updating my ipod to ios7 the remote control of the dock only works for the volume but doesnt work for skipping songs....Is there a solution to this?

Have you went to Bose"s support site?
Sometimes this works
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
However, sometimes an iOS update breaks compatibility and you will have to wait for an firmware update for the Bose or an iOS update.

Do the life proof cases for the iPhone 5 also work for the 5s?

Do the life proof cases for the iPhone 5 also work for the 5s or are the cases different for the 5s?
Thanks!

Do cases made for iPhone 5 also work with iPhone 5s?
While iPhone 5 and iPhone 5s have the same shape and size, the camera and LED flash are different. So cases made for iPhone 5 may affect the camera operation on iPhone 5s, and vice versa. When shopping for cases, you should choose one specifically made for the iPhone model you own.
Quote from Apple Site

Will the ipod docking station work for the iphone5?

will the ipod docking station work for the iphone5?

Which iPod is it?
If it's the newest generation iPod dock, then it probably won't as the new iPod is much thinner than the iPhone 5. It also depends on the shape of the dock (if it has a thin space for the iPod device). Do you think you could add a picture. I will give a more direct suggestion of you can.
Sandy-Wood

Infopath submit button only works for the first row in a repeating table‏

Hi, I have a InfoPath Email submit button issue I could not figure out. I have a master/detail repeating table in my form, and one of fields is "EmailAddress" which shows customer's email address. I created a submit button and put the "EmailAddress"
field to "TO" object. When I tested it, the submit button only would return the first row of emailaddress from the repeating table, but not the rest of it..
What I want is when I highlighted a customer, and click the submit button, the current customer's email address would show up in "TO" list. I did some research and saw some suggestions about using current() function. So I put current() in the front,
like this:
current()/dfs:dataFields/d:vw_HZLeadLists/@EmailAddress
Still not working..Just return the first record of emailaddress from master repeating table... Does anyone know what's going on here? Thanks a lot!

Hello,
Use double eval to get all rows values. See my reply for more information in below thread:
eval(eval(EmailAddress, 'concat(ToField, ";")'), "..")
http://social.technet.microsoft.com/Forums/sharepoint/en-US/cc22aeb7-351f-45a7-8a4c-94132c3e0db2/eval-semicolon-function-issue?forum=sharepointcustomizationprevious
Hope it could help
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help

My ringer only works for the phone ringer. It is silent on all other functions. Anyone experience this before? All settings are correct.

My ringer only works on the phone. All other functions are silent and the ringer increase button does not add volume.

Had this happen today and 2X past as you discribed. A reboot (turn phone off and on) restored all sounds for me. The first time I can't associate w/ a cause but the second and third were just after listening to a podcast using the apple podcast app - the only app available for that. That's my story and for now I'm sticking to it.

TS1702 Whenever I try to redownload an app from the cloud, it only loads for a few seconds then stops. What do I do?

The app was having problems, so I deleted it and tried to redownload it from the cloud. It only loads for a few seconds, then quits. I don't really know what to do, help please!

Never mind!!

Labview executable only works for about ten seconds before shutting down

Hi,
I'm not a newbie to LabVIEW but I am a newbie to creating executables and installers using LV. On my first attempts I'm having a strange problem that I cannot resolve. I already began discussing this problem on another thread, but I was advised to start a new one.
I've made a variety of VI's but for debugging purposes I made the simplest VI possible: just some plain text on the front panel, no code on the block diagram.
I created a project with just that VI, compiled an executable, compiled an installer, and sent the installation files to my colleague. I use a Win XP machine and so does he. He does not have LV installed.
The installation goes fine, the VI starts up, appears to run fine and then spontaneously quits (i.e. the window closes and disappears) after twelve seconds with no error message.This happens even if I create a VI with a loop. The VI executable, installed via the installer on my WinXP PC (which has the full LV application) does not replicate this problem. It occurs only on a WinXP machine where LV is not installed.
version info: LabVIEW 2010
My debugging ideas going forward are:
- try to play with the "Source File Settings --> Use default save settings" checkboxes, as suggested by another user in another thread.
- ask another colleague with WinXP and no LV to test the VI's, to see if the problem is somehow linked with my first colleague's machine.
- to check the Windows Event Log (following the advice of user Norbert on this forum), but I'm not sure if I'll be able to decipher what I read in there. A first look has turned up nothing interesting.
- am pretty stuck for ideas after that.
Thanking you in advance for any input you can give,
Garrett

Issue solved: the anti-virus was forcing the application to shutdown.
Bit of a newbie problem
I discovered the problem when I tried the executable on another colleague's PC. When the exe was launched, the anti-virus software (Avast!) showed a pop-up that said it was verifying the unknown program and then after about 12 seconds it shut it down. It then proposed to open the program in either the "sandbox" or "as normal" the next time. By choosing "normal" the VI worked fine the next time.
It turns out that on my first colleague's PC, he also had Avast! software, except that on his PC it was running in some sort of hidden background mode. This meant that it didn't display any pop-up messages to indicate that it was interfering with the VI. Once we manually launched the Avast! interface, it finally proposed the option of opening the VI in the sandbox or normally.
All works fine now. I hope this helps other newbies out there.

Does the ipad2 case covers work for the regular ipad

Does the ipad2 case covers work with the regular ipad?

If you mean the Apple smart cover for the iPad 2, no.
Any case specifically designed for the iPad 2 will not work with the original iPad.

Previewing mp3's in the preview panel only works for the first 3 seconds

Similar Messages

Maybe you are looking for