Previewing page in IE on Mac
Hi!
I am new to Dreamweaver and need to know if Windows based
Internet Explorer will work in Browser Preview if run on a Mac.
I tried to download IE for Mac but found that it was
discontinued. So before I will go and buy IE 7.0 can someone pls
let me know if I will run into any issues running a Windows-based
version of IE trying to preview a page in Browser Check - but using
a MAC??
Thank you
rollfo wrote:
> Hi!
> I am new to Dreamweaver and need to know if Windows
based Internet Explorer
> will work in Browser Preview if run on a Mac.
> I tried to download IE for Mac but found that it was
discontinued. So before I
> will go and buy IE 7.0 can someone pls let me know if I
will run into any
> issues running a Windows-based version of IE trying to
preview a page in
> Browser Check - but using a MAC??
> Thank you
>
If you have an Intel Mac there is a program that you install
(based on
WINE) that allows you to just download and and install IE6
and run from
a Mac. IF your using a PowerPC unit your out of luck.
If you send me your email address though I have a working
.DMG file of
IE 5.2.3 the last version for Mac. works great on OSX.3.9.
Somewhat on
OSX.4.11 and have no earthly idea whether it will even fire
up on
leopard (X.5)
Phillip M. Jones, CET |LIFE MEMBER: VPEA ETA-I, NESDA, ISCET,
Sterling
616 Liberty Street |Who's Who. PHONE:276-632-5045,
FAX:276-632-0868
Martinsville Va 24112 |[email protected], ICQ11269732, AIM
pjonescet
If it's "fixed", don't "break it"!
mailto:[email protected]
<
http://www.kimbanet.com/~pjones/default.htm>
<
http://www.kimbanet.com/~pjones/90th_Birthday/index.htm>
<
http://www.kimbanet.com/~pjones/Fulcher/default.html>
<
http://www.kimbanet.com/~pjones/Harris/default.htm>
<
http://www.kimbanet.com/~pjones/Jones/default.htm>
<
http://www.vpea.org>
Similar Messages
-
Can Virtual PC access the web pages served by my Mac?
Macs are really awesome for web design. Really wonderful. Sooner or later, though, you run into this one little nagging issue: 85% of the ever-lovin' public uses IE 6. So, you gotta test all your stuff on IE 6 before you release it.
So. I've just installed XP Pro on Virtual PC 7.0.2 running on OS X 10.4.7. I've got the internet connection working by turning on virtual switch networking, which the program warned me probably wouldn't work with my wireless network (but seems to). The internet connection did not work until I turned this on.
While doing web development, I turn on Personal Web Sharing and preview my pages by accessing them through http://localhost/. I should be able to access pages served from my Mac from other computers on my network by typing in the IP address shown in System Preferences. Indeed, this has always worked in the past, but from separate computers. My theory is that the virtual PC is a computer on the same network as its host, but when I try to access my Mac's IP from Internet Explorer, it doesn't work. Other web pages work, just not the ones served off my Mac.
I literally have changed no settings within Windows. The only thing I've changed in VPC is the virtual switch networking thing.
ipconfig says this:
Windows IP Configuration
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . : domain.actdsltmp
IP Address. . . . . . . . . . . . : 192.168.1.107
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1
And the TCP/IP prefpane says this:
IP Address: 192.168.1.101
Subnet Mask: 255.255.255.0
Router: 192.168.1.1
So...looks good, right? Yet it's broken. I'm at a loss. Does anyone know if this is possible at all?
Thanks,
-Ryanhi there,
sorry I cannot answer the reason why, but I have the same problem.
I initially made my website in iweb version 1.x and when I bought the new copy of iweb updated the site to iweb 08
however since doing so, the minute it was uploaded, I got emails saying that my website had crashed peoples computers and it was slow, something that I had never had before
having updated the domain to iweb08 I couldnt go back, so rebuilt the site in iweb06 - and since never had a complaint since.
However forgetting why I decided against using iweb08 to produce my site, when I got my new mac, I recreated my website from scratch in iweb08
within a couple of hours of uploading the new site, I can various emails saying that the site was crashing peoples computers and again the site was slow, yet I was only upgrading the site, using the same basis for the iweb08
anyway have gone back to my iweb06 and asked the people that had the problems to try again and low and behold the website is working a dream
Could someone shed light on why iweb08 creates so many problems for the people viewing the site.
I viewed the site okay in mozilla firefox, but is does seem to be an issue with PC's and also IE
I have iweb 2.0.4 currently as its a new imac, and 1.1.2 on my macbook
the site is with 1and1 -
"Preview Page in Browser" stopped working...
Hi guys,
First off, looking forward to seeing what's unveiled at Create Now Live on December, 11th!
Anyway, here's the Muse bug that just cropped up yesterday as I was working on a niche one-pager site: when I tried "Preview Page in Browser," nothing happened.
Usually when I'm working in Muse, I already have Firefox open on my screen, and when I hit "Preview Page in Browser," it'll open a new tab with the preview. This time, nada, no new tab, no preview.
Have no idea if my system settings or anything else has changed since the last time I designed a mini-site in Muse, a few weeks ago, when "Preview in Browser" was working fine. I'm on an (aging) PC laptop, running Windows XP.
Any ideas what's going on? Thanks again!
DHello,
Could you please check if the issue is specific to one website on your computer.
You can try creating a new test website and check if you are able to preview it in a browser or not.
If it does not work, please try deleting the AdobeMuse folder from the location :
Windows 7: C:\Users\your_user_name\AppData\Roaming\
Windows XP: C:\Documents and Settings\your_user_name\Application Data
Mac: /Users/your_user_name/Library/Preferences/
After that please relaunch Adobe Muse and check if you get the preview in Browser feature to work or not.
Hope this helps.
Regards,
Sachin -
Why won't Firefox open my e-mail page, after clicking the tab, from a Comcast preview page?
I have Comcast.net. From my home page, when I click the email button, first, I must sign-in and then a preview page appears with a short list of emails. When I click the tab to open the entire email page, the entire page does not open as it should. When I click each email on the preview page, each email will not open, as it should, either. This all worked, previously, but stopped working about 3 days ago.
This issue can be caused by corrupted cookies.
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Firefox > Preferences > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Firefox > Preferences > Privacy > Cookies: "Show Cookies"
* http://kb.mozillazine.org/Menu_differences
*Windows: Firefox (Tools) > Options
*Mac: Firefox > Preferences
*Linux: Edit > Preferences -
ITunes podcast preview page will not link with itunes store in windows
My external url still connects correctly with the itunes preview page and opens the iTune's store in iTunes (versions 9 & 10) on my Mac but when I check the link on a windows vista pc, since the latest version of iTunes was made available, I cannot get beyond the preview page as iTunes is not recognised despite clicking on the 'already' installed link on the page.
Anyone having this problem since iTunes v10 was made available? I've tried it with the full url and the shortened url with the same results.followed these steps...NO LUCK 5 days and stillnot working
The recommended steps are:
1) Sign out of the iTunes Store by choosing Sign Out from the Store menu in iTunes.
2) Visit the My Apple ID website at:
http://appleid.apple.com
3) If the site is not displayed in your preferred language, click the Change Language link in the upper-right corner, type the name of your language in the field that appears, then click the Save button.
4) Click the "Manage your account" link.
5) Type your iTunes Store account name (which is your Apple ID) in the Apple ID field, type your password in the password field, then click the Sign In button.
6) Click "Addresses" in the column on the left. Look at your shipping addresses at the bottom. If you have multiple shipping addresses, remove any out-of-date or duplicate addresses by clicking Delete. Also, make sure the state or province field is filled out correctly for each address. To edit an address, click Edit.
7) Now click "Phone Numbers" on the left. The area codes should be in the area code fields and the phone numbers should be in the phone number fields. If an area code is missing, or if it is in a phone number field, your account information may not save properly.
8) Make any other necessary corrections, then click the Save Changes button.
9) Click Log out in the upper-right corner.
<Edited by Host> -
Big Colour and detail changes between Original Nikon RAW files and the images created on the Preview page! Yes there are distinct visual changes when I preview my Nikon NEF RAW Files.Please note I do not use iPhoto at all.
If you view it as a contact sheet straight from the original folder there are no alterations but the moment you double click and want to 'Preview' it, this new preview page introduces very noticeable distortions : lighter shading goes missing and colour goes darker e.g orange turns red and mid blue goes deep blue! Alarmingly the little column on the left of the preview page showing the collection shows the original file colours and then after a few seconds show the new distorted image...you can see this visible change and it takes place after a few seconds once you double click! Also if you use Apple's 'Cover Flow' to preview, this function will replace your original RAW file with the new 'altered preview' image!
I have raised this with Apple but they have yet to reply...has anyone ever experienced this? I have used my Mac book for 18months only noticed it about 5 days ago!
I went to Apple store and we tried it in other laptops and Macs and it happened to all of them so we think this is a software issue and not down to the laptop.
Any help is much appreciated!Big Colour and detail changes between Original Nikon RAW files and the images created on the Preview page! Yes there are distinct visual changes when I preview my Nikon NEF RAW Files.Please note I do not use iPhoto at all.
If you view it as a contact sheet straight from the original folder there are no alterations but the moment you double click and want to 'Preview' it, this new preview page introduces very noticeable distortions : lighter shading goes missing and colour goes darker e.g orange turns red and mid blue goes deep blue! Alarmingly the little column on the left of the preview page showing the collection shows the original file colours and then after a few seconds show the new distorted image...you can see this visible change and it takes place after a few seconds once you double click! Also if you use Apple's 'Cover Flow' to preview, this function will replace your original RAW file with the new 'altered preview' image!
I have raised this with Apple but they have yet to reply...has anyone ever experienced this? I have used my Mac book for 18months only noticed it about 5 days ago!
I went to Apple store and we tried it in other laptops and Macs and it happened to all of them so we think this is a software issue and not down to the laptop.
Any help is much appreciated! -
Hi
When I try to access my email I can see mail the preview page but when I click to go to inbox it bounces back out to my password again. I re-enter password and it does the same again. I've found only way to access is if I clear cookies and history first which obviously I would rather not have to do everytime. Anyone got any answers for this one please.Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
* On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you. -
I can't generate a Preview Page/Site in Browser or in Preview
When I’m connected to the internet, I can't generate a Preview Page/Site in Browser or in Preview. Some idea that what’s happening?
Hello,
Could you please check if the issue is specific to one website on your computer.
You can try creating a new test website and check if you are able to preview it in a browser or not.
If it does not work, please try deleting the AdobeMuse folder from the location :
Windows 7: C:\Users\your_user_name\AppData\Roaming\
Windows XP: C:\Documents and Settings\your_user_name\Application Data
Mac: /Users/your_user_name/Library/Preferences/
After that please relaunch Adobe Muse and check if you get the preview in Browser feature to work or not.
Hope this helps.
Regards,
Gaurav Aggarwal -
Previewing Pages document in Preview shows page numbers incorrectly
Previewing Pages (5.2) document in Preview (7.0) shows page numbers incorrectly. Regardless of starting page number preview shows as Page 1.
Suggestions appreciated...That appears to be YABIP5 (Yet Another Bug In Pages 5].
Pages .09 documents are fine.
No prizes however for finding bugs in Pages 5/5.2 it's swarming with them.
Peter -
On the Comcast mail site, I cannot get past the "Inbox Preview" page. If I hit anything, including "View Entire Inbox" or on a particular message, or anything else, I'll just be returned to the "Inbox Preview" page. This only happens on Firefox. When it started happening, I finally gave up and tried Internet Explorer, which works fine. I'd prefer to access email on Firefox, so please tell me how to correct this.
I don't know if this is related, but immediately before this started happening, I may have hit something on my laptop, which caused the Comcast email screen to magnify to the point where I could not view the message window on messages. I couldn't figure out how reverse this, so I did the above (went to IE, which was fine). When I next attempted to access Comcast email from Firefoxe, the site was no longer magnified, but I had the above problem with being unable to get past the Inbox Preview page.Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us! -
How do I access the iTunes Preview page with a web browser?
Does anyone out there know how to access the iTunes app preview page with a web browser? So far the only way I've been able to get there is by Googling the app with the term 'iTunes preview'. Is that really the only way? The iTunes page itself has no obvious link to the app list.
Thanks.Thanks, but I should have been more specific. I was trying to access the iTunes app preview page on my PC through Chrome. While I have an iPad, it's not convenient to have to refer to it every time I want to discuss an iOS app.
-
My iPad App Store is stuck on avg preview page when I open app store
Open multitasking menu (double - press on home button), hold the AppStore icon for a second or so, and kill it with red X that will appear.
-
This started last month - when I go to my comcast account, I'm able to log on and view my account but can not open my email inbox. When I enter my user name and password, I'm taken to the "Email Preview" page so that I can see a partial view of the inbox but when I click on "View Entire Inbox" it jumps to a page showing that it's loading but goes right back to the preview page - I can't open any of the emails. This does not happen when I use Internet Explorer or Firefox on my older laptop.
Did you find out what addon?
-
JasperReports - how to save as PDF from Print Preview page?
Hi all!
How can I save reports created with JasperReperts (with iReport tool) as PDF?
On print preview, when I select it is as PDF, and click on "save", nothing is saved. Also, I get NoClassDefFoundError despite I included all nessesry classes (did I?). Here are list of included classes
jasperreports-1.2.7.jar;
jasperreports-1.2.7-javaflow.jar;
commons-beanutils-1.5.jar;
commons-collections-2.1.jar;
commons-logging-1.0.2.jar;
commons-digester-1.7.jar;Here is my code:
void printWithPreview() {
try {
JasperPrint print = JasperFillManager.fillReport(report, reportParam, conn);
JasperViewer.viewReport(print, false);
//byte[] pdfasbytes = JasperExportManager.exportReportToPdf(print); // can I use it somehow?
JasperExportManager.exportReportToPdf(print);
} catch (JRException e) {
e.printStackTrace();
}Can you help me with this?
Also, I need to know, how to limit options "save as" only to PFD (on same Print Preview page)?
Thank you in advance!Right!
I was missing iText.jar.
So, you need only this code to get report preview and feature to export to pdf, html and other formats:
void printWithPreview() {
try {
JasperPrint print = JasperFillManager.fillReport(report, reportParam, conn);
JasperViewer.viewReport(print, false);
JasperExportManager.exportReportToPdf(print);
} catch (JRException e) {
e.printStackTrace();
}You do not need to save it specificly to c: or other "hard coded" directory.
Thanx 1000 times!!! -
HP Officejet Pro 8500 Printer forcing a preview page before printing
I have an HP Officejet Pro 8500 (my computer is Windows 7 home premium) and it worked great until a couple weeks ago, perhaps as result of my computer upgrading itself to IE 9, but I don't know.
Suddenly it started forcing open a Preview Page, making me wait (sometimes very long times) for the preview window to open, and then I had to click once again to actually start the printer. It is very annoying to have to wait endlessly for the window to open up, and then it's another click to actually start. It is wasting a lot of time and making the whole process much more cumbersome and tedious.
How can I go back to my printer starting immediately without all these in-between steps?Hi there sorry to learn that you are facing this problem.
Are you still facing this issue? If you are I will do my best to help you.
Have you upgraded the firmware of your printer lately; you can get the latest firmware in the main support page for your printer
This is the main support page for your printer, GO HERE Go to software and drivers download and select your operating system. You should also upgrade the firmware of the printer.
If you are not experiencing this issue any longer, May you let me know, your time and courtesy, will be deeply appreciated.
Regards;
RobertoR
remember ==▼
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!
Maybe you are looking for
-
Recover iPhoto pictures from a hard drive?
Hello, My hard drive of my Macbook Pro crashed, and a day before it happened I moved ALL the pictures from my phone to iPhoto. All the pics I ever had with and of my dog who died are there. I wanted to ask if there's a way to recover them from the ha
-
My question is self-explanatory.
-
My itunes account is disabled for some reason, how do i activate it again?
i dropped my iphone in the water so i got a different phone for a week while i got my Iphone 4 fixed. When i switched back to my Iphone 4 it wont let me do anything on the app store and all it says is my account has been disabled. How can i reactivat
-
Create a GPT partition table and format with a large volume (solved)
Hello, I'm having trouble creating a GPT partition table for a large volume (~6T). It is a RAID 5 (hardware) with 3 hard disk drives having a size of 3T each (thus the resulting 6T volume). I tried creating a GPT partition table with gdisk but it jus
-
Help in Java Micro Edition SDK 3.0 EA...
Hi, I am using the Java Micro Edition SDK 3.0 EA version. I have a problem that when i write code to access the RecordStore, it does not seem to work. Plus, for the FileConnection programs, where do i store the accessible file structure on the disk.