Previewing songs - automatic continuous play

When previewing songs in the "Browse" section, is there a feature that allows an automatic continuous preview of all songs in the list? Currently, I have to click on each individual song I want to preview. I'd like to set it up where after 30 seconds of one song, it automatically moves down to preview the next song in the list, and so on.

There has never been even an album preview like other websites.
I think you're asking a bit much for continuous preview of a browser list, it they can't even do an entire album list that never changes.
Yes, I was being sarcastic.
You can contact Apple, if you think it will do any good:
itunes menu > help > Provide itunes support
Or an email page from here, you have to dig several levels to get to the email or chat buttons
http://www.apple.com/support/itunes/

Similar Messages

  • HT1567 trying to preview song but only plays for 5 seconds

    When i preview a song it will only play for 5 seconds instead of the 1min/half it allows. I 've never had this problem before. I update the software, but it still will not allow me to listen to the song no more tham 5 seconds

    I have had this problem for quite awhile.  Sometimes the preview plays all the way through, or not.  I had it in the previous version and now the new version.  There is no help from Apple/iTunes.  It seems odd that WE must continue to try and find the solution to THEIR errors without any comments or help from Apple. 

  • TS1717 only 7 songs will continuously play on my IPhone 4, but 60 are downloaded, how can i get them all to play

    I have tried to delete my playlist off phone, but the same 7 songs keeps playing over and over and it scrolls through the other songs downloaded. Help.

    You can transfer contents from your iPhone back to iTunes library:
    First, *BEFORE you connect the iPhone, please go to the iTunes preferences and select "devices", then select "disable automatic syncing for iPad, iPhones and iPods"*.
    Then, for those songs that you purchased on your iPhone: Transfer purchases from iPod to iTunes.
    For all other non purchased contents (your photos etc), their are ton of third party programs, some is free: iDump, Floola. Some is shareware, but they does preserve playlist/ratings/playcounts/artworks etc: iCopyBot, CopyTrans

  • I have downloaded songs and when I play them they stop playing. I have to hit the sleep/wake button for the ipod to come on and hit play, then the song will continue playing where it left off

    Why are songs cutting out in the middle and my ipod shutting down?I have to hit the sleep/wake button to turn it back on and hit play again. Then, the songs will play from where it left off.

    Hello bradesparza,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    Some of my iTunes Store purchases won't play
    http://support.apple.com/kb/ht1325
    Best of luck,
    Mario

  • ITunes starts and plays songs automatically

    I installed Itunes 12.0.1.26 and Yosemite last night and now iTunes starts and plays songs automatically.  What is the problem with iTunes?  Could someone else have my iTunes account?  Should I delete ITunes and re-installed?

    I agree with/have same problem as vinfromacton.
    I know it's Flash causing the problem:iTunes had been functioning normally until this morning when I downloaded Flashto allow me to listen to archived radio programs on the internet.
    Once I downloaded Flash, iTunes startedopening and playing automatically ~ every 2-3 minutes. Annoying as it playsover audio I am listening to &/or recording.
    Only fix I've found is to turn iTunesvolume down to zero: does not stop iTunes from opening - it continues to do so- but I don't hear the iTunes audio.
    I'm also going to try dr alexander'ssuggestion: Open a blank Playlist > leave iTunes focus there>quit iTunes.
    It reopens but at least it'ssilenced....
    Haven't tried it but I would imagine uninstallingFlash (need to download the uninstaller from the Adobe website) would solve theproblem. This however would lead me back to my original problem: no Flash >cannot listen to audio archived on the internet and other internet audio...
    I'm also going to call Apple: I haveAppleCare. Will re-post after talking to them.

  • Insert CD, have it import AND play CD after current song automatically?

    I'd like to be able to just insert a CD, walk away from the computer, and have i-Tunes import songs and and start playing them automatically... is this possible? My i-Tunes happily continues playing its current playlist, without ever switching to CD.

    Well, play songs while importing or converting is already checked. And it does indeed play songs if I'm not already listening to something else. But if I am, the playlist continues playing, and the CD is happily ignored. I don't want to have to interrupt the current song; instead, I just want the CD to cue up next.

  • Problems w/ continuous play & next/prev. song controls

    i am having large issues with the next and previous song controls. the controls in the top left corner to the right and to the left of the play/pause button only stop the current playing song when pressed, and when i press the left/right arrow keys on my computer keyboard to move to the next song, the current playing song also stops instead of working correctly.
    to make matters worse, when a song in my library finishes playing, it does not go to the next song and begin play like it should, it only stops the music much like what happens when you try to manually go to the next song. i cant get any continuous playback of multiple songs and cant swith from song to song without double clicking with a mouse. can anyone fix this problem?

    No problems ... I have the exact parallel problem with remembering the Mac key combo for this one.

  • Itunes not responding to shuffle, repeat or continuous play of songs!!!

    hi ...
    yesterday morning itunes was working fine and i could play tracks on shuffle mode and continuous play but last night that was not the case.....now when i select a track regardless of what play mode i have selected itunes will only play one song and then stop so that now i have to keep clicking on the next track manually....its is very frustrating ....i have switched itunes off and relaunched it several times but the problem is still happening....
    can anyone help or shed some light on why this is happening? thanks

    thanks chris .....the problem has been solved and i now can take a breather from all that manual clicking :))) one more question what would i have pressed to un-mark all my tracks in that little box and how do i re-mark the little boxes for all tracks in one full swoop? thanks

  • STOP continuous play of songs in itunes Iphone4

    Talk about irritating! ha!
    I DO NOT want continuous play of songs in Itunes ON MY IPHONE 4.  How can I stop this?
    I tried unchecking ALL of my songs (entire library) in Itunes on my PC.....and that works for NOT having continuous play on the PC......and then I re-synced my Iphone....after deleting all music from the Iphone............ but the songs still play continuously.    I do not mean the library of songs is looped.   I know how to use the "repeat" functions.
    I just want Itunes to stop playing music after ONE song.   I am using Iphone to perform music and need to talk in between songs.
    HELP!
    Thanks in advance
    ron

    I suspect it is a feature very few people want. However, if it's important to you, you should let Apple know:
    http://www.apple.com/feedback

  • Songs won't continuous play in playlist on itunes, Please Help!!

    Just recently when I try to play my music on my computer on itunes it won't continuous play in my playlists. Just one song at a time. I cannot figure it out. Can anyone help? Any suggestions?

    The songs in this particular playlist are unchecked because they are all AAC conversions that I load on my nano. For normal iTunes use, I have my songs in 320 kps. mp3s--but the files are too big for the Nano. So I keep this playlist, and uncheck the songs so I don't have duplicates playing in my regular libary. The songs don't play when checked and unchecked are together, but when it's just the complete unchecked song list they play in random order continuously until I stop them manually.
    good lord ... i don't believe i've ever seen that reported before. (no real surprise, i guess ... how would people realise that something strange was happening if it was happening to them? that would keep report levels down ...)
    can anyone else replicate samdogmom's itunes behavior?
    love, b
    ps: didn't we talk months ago about upgrading to NIS 2006? if so, how's that treating you?

  • Continuous play not working for songs transferred to another computer

    I purchased a few albums via iTunes. When I changed computers and synced my iPod with the new computer I lost the continuous album play for the songs in these albums. If I play any song from any of these albums and when that song is completed play stops.
    I do not have this problem with any copied/ripped CD music, just the music purchased from iTunes.
    I did try setting the song option for continuous album play but to no avail.
    Any ideas?

    Are there check marks beside all the songs? Unchecked songs have to be clicked on individually to play them, checked songs will play one after the other. If you hold down the CRTL key and click beside any song in your list then all the check boxes can be toggled on or off: iTunes - Keyboard Shortcuts for Windows

  • HT1399 Why cant I create a playlist for my music/song videos? Continuous play is also not possible in the video app on the phone!!!! previously, prior to IOS 6, it was possible to have both music videos & songs mixed in the same playlist in the music app

    Why cant I create a playlist for my music/song videos? Continuous play is also not possible in the video app on the phone!!!! previously, prior to IOS 6, it was possible to have both music videos & songs mixed in the same playlist in the music app

    I am back with an update. I turned off Match on both the ipad and the iphone 5. By doing so I was able to sync my Iphone and ipad to itunes and store the music on my devices rather than the slow streaming.  So far this has fixed my problems with the iphone I have all my music, playlist, most of the album art and so on.  But the ipad is a different story.  I have the music and artist but not one playlist  I am sure Apple will have an upgrade soon that will address these issues they are usually very good about this. 
    Now have any of you experienced another problem that has existed as long as I have used faces in Aperture.
    I have over 200 faces and they are organized a-z problem is I have this going on A-Z folowed by a few that start over A-Z followed by another few A-Z and again a 4th time A-Z.  Imagine how difficult it is while I am showing someone the great features of my iphone, ipad and imac.  Which I do talk highly of all the time.  But how do I explain that even though their name starts with a or b or what ever they are not important enough to me to be in the first list of A-Z or even the 2nd or 3rd list of A-Z someohow they are in the 4th section of the list!!!!
    I have managed to get the Imac to fix this but for some reason the IOS devices do not.   Any ideas?
    Thanks Al

  • When trying to play a song from a play list on my phone it automatically skips to another song

    This is happening on my ipod and iphone; I'll select a song to start playing from a playlist and it automatically skips ahead 1-3 songs and starts playing, and whenever I try to play that song it does it again. Some songs we put into itunes from disks and some were bought from itunes and it doesn't seem to discriminate against either type and it's really bugging the crap out of me! Just started about a week ago....any suggestions? clues?

    It could be because of a corrupted song. Usually a resync will solve this issue. Try the following form of troubleshooting to find out which song is corrupted.
    Select Manually Manage Music and Media (or videos, can't recall which). Select half of your library and sync it to one device, and sync the other half to the other device. Play the songs and see which device skips. If only one skips, then it means that the half of the library that you synced to that device contains the song causing the problems. Split that half of the library in half and keep repeating the syncing/testing/splitting process until you find the song. Then delete/redownload the song. If both skip then it may be multiple songs.

  • How do I change the settings on my ipod so that it plays continuous music.  Right now, it plays the same song over and over, even if I select the shuffle icon.  It used to show the continuous play icon, it doesn't anymore.

    How do I change the settings on my ipod so that it plays continuous music.  Right now, it plays the same song over and over, even if I select the shuffle icon.  It used to show the continuous play icon, it doesn't anymore.

    Right click on a movie(in iTunes), and click "get info" then go to album artwork and add the artwork that you want...
    -Messymeese

  • AE CS5 (10.0.1.19) Ram Preview - Audio stops and continue playing randomly

    I already reported this issue to Adobe as a BUG but I want to ask here if somebody else have this problem or can confirm it.
    Audio breaks/stops and continue playing randomly when 'Ram Previewing'
    It happens mostly when the RAM is fully filled up with image cache files! When the Ram is not filled up totally with image cache files it happens rarely!
    Steps to reproduce BUG / issue:
    1. create a new composition with a length of for example 5 minutes.
    2. create a new solid with size of 50x50 pixel and animate the position of the solid for a very long time so when ram previewing the whole ram/memory gets filled up with different image cache data (this is very important!). Alternatively you could use a long video file to fill up the RAM completely.
    3. import a wave file .wav 16bit 48khz uncompressed which is very long for example 5 minutes.
    4. insert the wave file in the earlier created composition which contain the animated solid or video file.
    5. Set the work area bar (preview range) for the whole composition.
    'Ram Preview' the composition until the whole RAM/memory is filled up with image data.
    AE has to stop rendering because there is no more space available in RAM.
    make sure 'from current time' checkbox is off.
    6. listen to the audio which stops playing randomly for about 1-2 seconds and comes back and continues playing (***BUG***)
    7. Now set the right handle of the composition work area bar (preview range) to less then the maximum RAM size
    (less then the green cache indicator on the right side)
    8. "Purge image caches" or "Purge All"
    9. Ram preview the now smaller work area
    10. listen to the audio. The audio breaks are gone! (***Workaround***)
    Additional information:
    I have the latest After Effects CS5 update installed (10.0.1.19)
    This behavior is tested with different audio drivers inside After Effects CS5 (After Effects WDM Sound, Generic Low Latency ASIO Driver,  ASIO DirectX Full Duplex Driver)
    I also tried different Sample Sizes Buffers (alternatively to the default 2048 samples) but without success.
    Reducing the amount of RAM which After Effects can access didn't solve the problem!
    System:
    Win7 64bit all latest Updates, 8GB RAM, CPU: intel Core 2 Extreme QX9300, nVidia Quadro FX 2700M, IDT High Definition Audio Driver v6.10.0.6227
    There is no driver problem on my system because After Effects CS3 & CS4, Premiere & Soundbooth CS3 CS4 CS5 have no audio problems!
    I have lots of other professional audio software like Steinberg Cubase 5.... on the same system and they all work fine.
    I also turned off AVG Anitivirus and Windows firewall for testing without success.
    AdobeQT32Server.exe, dynamiclinkmanager.exe, PProHeadless.exe, afterfx.exe do not get blocked by firewall they have full permission.
    The CS5 Production Premium installation went fine and without errors and antivirus protection was turned off for the installation.
    Any help would be nice!
    Felix

    Yep, I agree with craulmedia....
    It's 1 month ago after my initial post and no valuable feedback from Adobe although I filled out the bug report in addition to this post and provide my email for further information.
    The only reason for upgrading from CS4 -> CS5 production suite was the use of all my 8GB RAM in AE and now AE can use it but when it's using it the audio have issues.
    CS5 is on the market for nearly a year and still have such essential issues... And my fear rises there will be no valuable update fixing these issues but instead Adobe forces me to upgrade later this year to CS6 in hope something change...
    I have had support request for different Adobe products in the past including telephone support, web support via Adobe ID... none with success the web support answered my request 3 weeks later with the message they will look into it... time went by and in the end the result was "Yes we know it's a known bug" the bug did not get fixed for that CS version. it even exists in the next major CS release! (talking about EncoreDVD here). Once the web support answered weeks later when I was in holidays and after some days I was not able to respond they closed my case. I reopened the case but never got an answer! Telephone support is nearly waste of time because in 95% of all cases it does not help to reinstall the whole operating system and talking to people who know less about computers in general or Adobe products then my mom - it's a waste of time.
    I don't want to blame here anybody for things happend in the past I just want to point out that this time I choose an other support channel (bug report and forum post) but it seems that this support channel is also a waste of time after 1 month with no valueable feedback!
    I bumped up this post 2 times and thanks to craulmedia for the third time.
    And now here is my fourth time *BUMP*
    All I got so far is: "I saw your bug report it's in the queue"
    Is it still in the queue? which queue nr. does it have? how long will it take to get any answer? is it reproducible? Is it confirmed as a known bug by Adobe? Is Adobe working on a fix? When will this fix be available? Is the fix provided in form of an update or in the next major release?
    OK, I know this is a user to user forum and Adobe people only stop by in their free time and there is no guarantee for any real support.
    But it started out so good in the first time...
    Last 2 things I want to add here:
    1. Why should I provide my email in the bug report? Sure so Adobe can get back to me for further information... but wouldn't it be nice if Adobe would be so kind to give some status report to that given email as a small present for the enthusiastic beta testers ?
    2. please Adobe take a look at www.uservoice.com already Autodesk started to move there with 3ds Max.

Maybe you are looking for