Previewing Source Audio Not Working

I have several source Libraries in iPhoto, each with their own stash of movie files.
The most recent one -- and only this one -- won't allow movie files to be listened to unless the file has been inserted into the edit. In other words, I can't select the part of the clip I want by its audio in order to include into the edit by scrubbing over it.
Other, previous Libraries don't experience this problem. When iPhoto is loaded with them, iMovie then sees them correctly and lets me preview the image and audio from within the iMovie Source bin.
But with the most recent Library, no sound can be played from the source clips.
Is there some switch, checkbox, plist, arcane file at work here?

My recommendation would be to pair the consumer camera with consumer software.  Anything on the below list costing less than $500 is a potential option.
http://www.videohelp.com/tools/sections/video-editors-advanced

Similar Messages

  • Live Preview Highlight is not working.

    I recently downloaded Edge Code to a new work computer and the Live Preview Highlight is not working.
    I have Edge Code installed on a personal computer, and it works great. The version I am using was downloaded about 6 months ago so I am not sure if they changed something with the most recent version. When I highlight a section within the html i.e. a table or row, it would highlight those same sections in the preview. However, this is not the case on my new computer.
    Anybody know whats up? Is it setting on Chrome that I need to change or is there some update that I am not aware of.

    I guess I assumed that you had Chrome setup to auto-update (like I have it). The only way Live Preview will work in a previous version of Edge Code is with an older version of Chrome.
    But there are other reason why Live Preview may not work in latest version of Edge Code. Take a look at Live Preview section of Troubleshooting Guide.
    Randy

  • Iphone 5.1 update messed up sound. Audio not working in youtube, music and video apps. Phone is not muted! nor is volume turned down

    Iphone 5.1 update messed up sound. Audio not working in youtube, music and video apps. Phone is not muted! nor is volume turned down

    Basics from the User Guide are restart, reset, restore from backup, restore as NEW.  Unless you've tried ALL of these, you're not done troubleshooting.

  • Ac3 dts audio not working in my iphone but it works in my friends samsung mobile?pls help me.

    Iam using o player... Ac3 dts audio not working msg showing

    Settings > General > Reset > Reset Network Settings
    Contact the carrier.

  • HT201210 AUDIO NOT WORKING PROPERLY AFTER INSTALLED IOS7

    After installed ios 7
    photos not able to see fully
    audio not working properly.... [no treble, no depth in sound, very low soung even the volume is full]
    get strucks while playing games

    This board is full of people that are update crazy...
    even when they have perfectly good working systems.
    i know i thought well it's just a security update not a major update.
    Best advice... whenever updating the OS, unplug all
    firewire devices.
    will take note of that from now on.
    Was this auto-update? Try downloading the file and
    running the update again with all firewire devices
    unplugged.
    While the 828 is disconnected perform the factory
    reset
    again.
    Disconnect the firewire cable from the 828mkII
    -Press the Setup knob
    -Turn the Setup knob all the way to the right
    -Press the Select knob
    -Press the Value knob
    -Power off the interface and plug the firewire cable
    back
    in
    -Power the interface back on
    i have the original 828 not mark 2, so no reset i know of, just power on off.
    After the Mac updates... reboot and plugin the 828,
    see if that doesn't get you going.
    pancenter-
    cheers pancenter, i'll give it a whirl updating without the interface plugged in. thanks for all your help.

  • How do I print in B&W now that I have lion? The whole "open in preview" method is not working. Thanks

    Subject says it all.....The whole "open in preview" method is not working. Any ideas or solutions would be appreciated. Thanks

    What kind of printer do you have? Have you looked at their PDEs to see if there are any settings for color/b&w?
    How is the "open in Preview" not working? Please provide some details.

  • Windows 8.1 beats audio not working

    Product name: HP ENVY TouchSmart Sleekbook 4
    after update windows 8.1 beats audio not working
    This question was solved.
    View Solution.

    Download the file below and instll , Restart and give your beats a try again. If you cant find Beats go to (Control Panel) and search (Beats Audio) then right click on it and create a shortcut, you should now have a shortcut to Beats Audio on your (Desktop)...
    Let me know if this helps ...
    DOWNLOAD LINK
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&softwareitem=ob-124012-1

  • Laptop left Speaker audio not working

    Sir,
    I have dv-5 1102 tu model laptop, in that left speaker audio not working. But, in headphones & Speakers have no problem in both left & right audio.
    Kindly do the needful

    Hey @KKVK ,
    Welcome to the HP Forums!
    I understand your left speaker is not working on your dv5 notebook.
    If the headphones are working it would tell us the sound card is fine. The same properties are applied to the speakers and the headphones in your audio control settings.
    You could try a system restore to before the issue started to make sure it's not something in the operating system. To perform a system restore see the following guide: Using Microsoft System Restore (Windows 8) or Using Microsoft System Restore (Windows 7).
    If this fails I would suggest contacting HP Phone Support to send the notebook for service. Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the following link to get the support number for your region: Phone Assist Worldwide.
    Thanks!
    Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    The Great Deku Tree
    I work on behalf of HP.

  • Audio not working on channel 5 and 7,, okay on all others????

    audio  not working on channel 5 and 7,, okay on all others????

    dalharris wrote:
    audio  not working on channel 5 and 7,, okay on all others????
    Without knowing all of the specifics in your situation, you may want to try these options:
    - If you have a DTA, and your remote control has a LANG button on it, press it. 
    -  If you have an HD or SD full cable box:
    Most low or no audio issues can be corrected by setting the Optimal Stereo output of the cable box. Here are the steps: Press the Menu button twice on your remote control. Select Setup. Select Audio Setup Under the Optimal Stereo setting, choose "Select to Optimize" and press OK/Select on the remote control
    - The audio settings on your cable box may have accidentally been changed:
    Press the Menu button twice on the Comcast Universal Remote Control. A new screen below will appear, with the top-left option automatically selected.
    Use the down-arrow key (above the Info button) to navigate to Setup and press OK/Select (the center key on the remote control in the middle of the 4 arrow/directional buttons).
    Use the down-arrow key (above the Info button) to navigate to Audio setup and press OK/Select.
    The Default Audio Track will default to the first option–Channel default–which which is always the channel’s main audio track (unless it was previously changed).
    Press the right-arrow navigation key to change the audio track. Changing this selection will instantly change the audio.
    1. Press once for English
    2. Press twice for Spanish (Español) OR to activate Video Description (DVS)
    3. Press three times for French (Français) 4. Press four times for Portuguese (Portugues).
    5. Then press the Exit button (above the Volume button) to resume program viewing
    Please note: These audio options can only be heard if the program provider or cable channel is providing that additional audio option.
    - If the above does not help, look at the remote control for your TV set (not your cable box) as the TVs language settings may have been accidentally changed (sometimes labeled as MTS or SAP on the remote or via your TVs settings menu).

  • Sound/audio not work

    sound/audio not work
    Model- Compaq M2000.
    S/N; CNF550117L,
    P/N-EE462Pa#UUF
    M2235

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.             
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar                              

  • Preview in Finder not working on Macbook:  "Cannot Load Display Bundles".  Any ideas??

    Anyone else getting this error on their Macook?   Preview is selected in the "Command-J" options..   Also, clicking on spacebar when a filename is selected does not load up a quickview either. 
    Any ideas would be most appreciated!

    giunta13 wrote:
    The audio works with itunes and even the keyboard piano feature in Garageband but I cannot get audio to work with any garageband tracks. Any ideas?
    1. In Garageband preferences, click the Audio/MIDI tab and make sure whatever you are using for an audio input is selected.
    2. When you want to hear or record a real audio track, click the "i" on the lower right of the window, and make sure you've selected the appropriate input source for that track.
    3. Still in the "i" pane, to hear it, make sure the Monitor is On.

  • Audio not working in Photo Booth, video works fine

    When I record video in Photo Booth the video works fine, the audio does not work. I have looked through other forums and tried what they have suggested but nothing is working. I sware it worked once but now I can't figure it out.

    Lance Mcvickar wrote:
    I have listed it with google and you would think with the .com we would come in first in a search but we are slowly going further and further back in the listings and never made it to the top. Any insight as to why that might be.
    Lance ~ It could be because iWeb websites are not made to be search engine friendly. See this article:
    _SEO For iWeb: How to get your iWeb Websites into Google & Other Major Search Engines_
    By the way, a tip... Instead of posting your site's URL like this:
    www.thehorseyourodeinon.com
    ...include the prefix like this:
    http://www.thehorseyourodeinon.com
    ...then it will be easily clickable in your post. And before posting, you can switch from Compose mode to Preview mode to verify that the hyperlink actually goes to your site when clicked.

  • Audio not working on one slide when publishing to HTML5

    I'm in Captivate 8. In one slide in my project no slide audio will play when published to html5. I've tested in Chrome and IE 11. In Chrome, I see the 'speaker' icon that appears when audio or video is running but no sound comes up. (The speaker appears for the length of the audio file ~5 sec) All other slides are fine, and the slide audio plays correctly if I use F3 or F10 to preview the slide inside Captivate.
    The slide in question is a 'menu' only reached via an advanced action. I know the advanced action is not the culprit - if I change it to jump to a different slide, the audio on that slide plays without problem.
    Similarly, I've verified that if I place this audio file on a different slide, it plays fine, but if I add a different audio file to this slide the problem remains. If I create a button on the problem slide to trigger the audio it plays, (but is unhelpful since I want the audio to play automatically when the user enters the slide).
    I've tried removing/re-adding the audio, recreating the slide from a copy, setting the audio to play via an "on enter" advanced action, and adding a play trigger to the advanced action that jumps to this slide. Nothing I've tried gets the audio to play.
    I'd welcome any suggestions of what might be happening or how to fix this.
    Thank you,
    Jenny Nilsson

    Hi Lieve,
    Thank you, yes, if I view using f12 the audio works correctly.
    The "exitBranch" action is associated with a continue button at the end of each branch. If all branches have been visited, it jumps to a new slide, if there are unvisited branches, it jumps back to the menu slide where the audio is not working. (If I edit the action to jump somewhere else the audio will work for the different slide.)
    The action was created from a shared action and my colleague and I have used it in multiple other modules without this error.
    Thanks,
    Jenny N

  • Audio not working when published

    When I record an audio clip within Captivate, although I can
    hear it when previewing that one slide, I can't hear it when
    previewing multiple slides or viewing the published movie. I know
    it has nothing to do with push-buttons or other elements on the
    slide (I've tried recording on blank slides, with the same result).
    I've also tried exporting the audio files and listening to
    them in Windows Media Player, and they work just fine (both the
    .wav and .mp3 versions). This problem just started happening today.
    For the last several months I've recorded tons of audio on several
    different movies with no problems, but now it's not working.
    I'm even worried that this issue is somehow corrupting some
    of my CP files. Even after I delete all of the audio clips from the
    slides they were on, and saving the CP file to a different name (it
    contains 30 slides and is about 2MB), when I view the Bandwidth
    Analysis, the Video size for Slide 1 shows 546KB, even though Slide
    1 contains very minor things (an image and a text caption)--the
    same kinds of elements as on every other slide, all of which have a
    Video size of approximately 20KB.
    So I inserted a blank slide after Slide 1 and copied the
    elements (an image and a text caption) from Slide 1 to the new
    slide, then viewed the Bandwidth Analysis again, and the new slide
    was only 20KB or so, much smaller than the original Slide 1. But
    then when I deleted the original Slide 1, the new slide I created
    suddenly takes on the same huge Video size in the Bandwidth
    Analysis as the previous Slide 1.
    Bottom line--I can no longer publish any audio in about 1/2
    of my Captivate movies. Can anyone please help?

    Teri, do this for me, if you would, please:
    Check "
    Movie > Preferences > Preferences tab > (check)
    "Include Audio When Movie Is Generated".
    Did that help?
    To Everyone Monitoring This Thread: Another easily
    overlooked troublemaker is the "Audio" icon (tiny speaker) located
    beneath the timeline when you are viewing a single slide
    (duh - sorry, brain fart - of course that's when yo see it because
    the timeline isn't visible until you go to Edit mode - double duh).
    Anyway, if you click it, you will turn audio off for
    all single-slide previews - note ... I said ONLY previews of
    the currently open slide. This will NOT affect other previews, nor
    will it affect audio in the published product . . .
    Hope this info helped some - have a good weekend!
    .

  • Mac Pro audio not working!

    adudio output not working...

    Hmm, does audio play outside of logic when your audio device is set to the built-in output and not the Line?
    Logic hooks into CoreAudio completely differently to any other audio program, it doesnt really interface with your sound drivers, it IS your sound drivers seeing as the core of Logic is also what Macs use to mix audio from other sources. When you say your volume control up in the top corner doesnt make a difference, the usual reason is that the device assigned to output audio from your Mac in general is not the same device that Logic is sending audio to.
    This makes me wonder what your Audio settings look like in Logic right now, compared to on your AM settings. If you could post a screenshot that would be really helpful.

Maybe you are looking for