Previews in Bridge CS5 not updating with changes in Photoshop CS5

The changes I make to a file in Photoshop are not updating in the same files previewed in Bridge. The Refresh button does not make a difference. Is this to do with Cache settings or some other Preferences perhaps?
How do I make my images in Bridge become accurate representations of my files being edited in Photoshop?

I am aware of the delay in writing the cache. It only took one stuffed-up rename to make sure I was aware of that in CS3 Bridge. I use many different camera bodies and have to sort the images into Date Created order to rename them. If Bridge hasn't finished reading all the EXIF data, the images will not be in the correct order and will rename out of order.
The xmp files are all created the first time I open the RAW files in ACR to do my edit. Prior to this, they don't exist, so if I see they exist, I don't need to check their creation date. This only changes if I am editing previously edited RAW files and I don't do that often. Once is usually enough when dealing with that many files.
There shouldn't be a problem with 10,000 RAW files as the cache is set to 50GB and Adobe shows this as 500,000 files. I know that is basically JPEG files. A corrupt cache is not the same thing as corrupt RAW files, and there are several copies of the RAW files anyway as a good back-up strategy requires.
Neither of my swap files/scratch pads are on RAID drives so I doubt this is the problem. I don't recall Bridge ever using more than 25% of the CPU Resources either. It's a 32-bit program anyway and probablky won't use all four cores of the Quad-core CPU...I might be wrong there, but I haven't noticed it doing so anyway.
My WPI figures were much higher when I was running a RAID0 Boot Disc, but one disc went belly-up and I decided against a RAID primary boot disc after that.
I'm sure that there are lots of people out there with lesser-spec'd computers who are not having the same problem. Equally, I'm sure that there are others out there with the same or similar problems. I'd like to hear from them about what they have done to eliminate the problem, or are we all doing work-arounds because Adobe haven't fixed a bug. I appreciate your attempts to help with this issue Curt, so don't feel that I'm simply dismissing your suggestions. I am hopeful though that someone who uses their system and CS5 in ways similar to me might have encountered and solved this issue.
Screen capture showing the Resource Monitor. Bridge going flat-out using only 7% of CPU and very little RAM. I have hardware rendering enabled.

Similar Messages

I purchased photoshop CS5 for my windows vista operating system. I purchased a canon 7 D some yrs ago no problem. I purchased canon 7D mk 11 in december 2014. The supplied software will not work with vista. Photoshop CS5 will not accept canon7D mk11. Can

I purchased Photoshop CS5 for my windows vista operating system. I purchased a canon 7 D some yrs ago no problem. I purchased canon 7D mk 11 in December 2014. The supplied software will not work with vista. Photoshop CS5 will not accept canon7D mk11. Can someone please tell me how i process canon 7D mk11 photos ?????. (is it possible to bypass camera raw and open the photo straight into CS5 without using camera raw first. if so how do i do that. if not how do i process pictures).
Thank you.
Brian in the UK.

Photoshop by itself cannot process raw image data. That is why the Camera Raw plug-in was developed. You could try the DNG converter and convert your images to the DNG format and then the Camera Raw that you have would be able to open them. I can't recommend Lightroom because you are using Vista, and Lightroom 5 cannot be used with that operating system. It may be time for you to get a new computer and upgrade your software.

Database not updating with changes from SQL*plus

Im having some issues with updating my database. I want to delete some rows in a table that has 323 records, so I run the SQL in SQL*Plus. It tells me that Ive deleted 222 rows. I then get a count of the number of rows in the table, and it tells me 101. But if I open another SQL*Plus window and get a row count, the original count (323) is what it says. The enterprise manager also tells me 323 records are in that table. Am I missing something here?

Aimee-
Until you 'commit' from the session you have issued the 'delete' statement, the other sessions will not be able to see the changes. In other words, the other sessions are getting you a read consistent view of the data.

Profit center not updating with plant change

We have an issue with the profit center not updating with change in delivering plant.
A CSR entered a material on a sales order but the material is not extended to their location. They select a plant to deliver the material from. At this point the profit center fills in for that plant, from the material master.
The issue then is the material is not currently available at that plant so when the availability check is preformed the CSR checks for availability in another plant. They are able to find an available item at another location so they select that location.
When they save the sales order the plant reflects the new delivering plant, but the profit center still reflects the first selected plant. The profit center does not pull from the material master correctly.
Has anyone seen this issue before and developed a solution?

Hello Matthew
May be you have substitution defined in CO.
T codes 0KEM or 0KEL
See the following OSS notes:
167912 - Substitution call-up points for sales order/billing document
Hope this helps.

Database table not updating with the changes

Hi friends,
                Iam having a tablecontrol where iam gettting the data from the ztable for a particular key field. When i change certain fields in the table control and when i click save, it should update the changes in the ztable.
   module save output.
   modify zslip_po1 from table x_po1_slip.
here slpno is the key field. if I change a field for a particular slpno it should update the changes for that slpno value only.
but it is not updating the changes. although iam setting the slpno field dynamically.
Please give me ideas.
thanks and regards
Murali Krishna T

Hi,
1. Have 2 Internal Tables, the first one must contain the original data(before change ) and the second one contains the update data(after changed ie. table control data).
2. loop the first table and read the data from the second table using index.
3. inside the loop, compare the work area of both the internal table.
   if both are same, then no change was made to that particular record, so no need for updation
   if both are not same, then some changes were made on that record, so need to update.
4. use modify command to update that particular record from the work area.
i think in performance wise also this logic will be helpful, since we are updating only the changed record.
since this is addon table, so i hope the no of records will also less, so no need to worry about loop.
check with this, it may work out......
thank you,
SenthilPandi C
Edited by: SenthilPandi ChandraSekaran on Feb 4, 2010 5:36 PM

Podcast List view not updated with iTunes 11.3.1.2

Podcast List view not updated with iTunes 11.3.1.2
Windows 7 Enterprise Service Pack 1 / Intel-i7 2.40 GHz / 8GB RAM / 64-bit
iTunes 11.3.1.2
After refreshing my Podcast list, some Podcasts with new episodes do not display the "Unplayed" blue dot.
If the podcast "folder" is expanded by clicking the triangle, the new episodes are shown with a "Unplayed" blue dot.
A new episode is shown in the My Podcast view, with the correct number of new episodes.
The new episodes are displayed in the All Unplayed view.
I've tried deleting all episodes and downloading new episodes from the iTunes Store.
I've tried Unsubscribing and deleting the podcast, then Subscribing again from the iTunes Store.
Neither attempt resolved the issue.
I've seen this issue for a while, and was disappointed to find no change with the iTunes 11.3.1.2 update.

it finally worked; got my Rush 24/7 downloaded, and it finally found my iPhone after switching from the USB 4 port Hub to a dedicated USB 2.0 slot on my laptop.

AE CS5 not opening with 'installizing media core'

I just updated my mac pro laptop to an 0SX 10.9 and installed my adobe suite cs5.
Aftereffects gets stuck when opening with the text 'installziing media core'. I have no 3rd party apps on my computer as it's brand new. I have quicktime pro 7. Please help!

Many thanks for your response. Miraculously CS5 is has just started working on my Mavericks, after a few failed attempts at downloading CSS.
Date: Sat, 8 Feb 2014 07:30:31 -0800
From: [email protected]
To: [email protected]
Subject: AE CS5 not opening with 'installizing media core'
    Re: AE CS5 not opening with 'installizing media core'
    created by Rick Gerard in After Effects - View the full discussion
You should have checked the forums or at least system requirements before upgrading to Mavericks. After Effects CS5 is not compatible with Mavericks. You will have to revert or upgrade.
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6100105#6100105
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6100105#6100105
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6100105#6100105. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in After Effects at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Documents that are park in FBV0 do not update with the new user name when

Hi,
I need to find out why documents that are park in FBV0 do not update with the new user name when any changes are made. Also when we park using MIR7 and make changes to the documents at a later time the document updates with the new users name.
Requesting you to please suggest what could be the reason.
Earliest reply will be highly appreciated,
With regards,
Rj

Hi,
I have checked this in system. I posted one Parked invoice using T.code FV60 and there i appeared my name because i created. But after some time one of my collegue changed the reference and text field with his login i.d. But still in the invoice it is showing as my name whereas if we go to the environmnet, there in the changes we can see what are the changes done and it is appearing my collegues user i.d. But in the main invoice it is still appearing my name.
Regards,
Rj.

Quotation not updated with latest configuration prices

Hi Friends
Quotation is changed using FM-BAPI_CUSTOMERQUOTATION_CHANGE for updating configuration options with changed prices. But Quotation is not getting updated with changed prices, there is no error message thrown.....Please let me know how to fix this.
BR
Lavanya

Hi ,
are u doing the this step ?
The BAPI does not have a database. This means that the relevant application must leave the commit, in order that changes can be carried out on the database. The BAPI BAPI_TRANSACTION_COMMIT is available for this.
regards
Prabhu

TS3694 ipod 4gwill not update with computer: i get error 3194 also 1.6gb of other

ipod will not update with computer: i get error 3194.. i updated itunes and still nothing. tryed to restore,same thing... now i have no music(random) and 1.6 GB of "OTHER"....help me

This device is not eligible for the requested build: Also sometimes displayed as an "error 3194." If you receive this alert, update to the latest version of iTunes. Third-party security software or router security settings can also cause this issue. To resolve this, follow Troubleshooting security software issues.
Downgrading to a previous version of iOS is not supported. If you have installed software to perform unauthorized modifications to your iOS device, that software may have redirected connections to the update server (gs.apple.com) within the Hosts file. First you must uninstall the unauthorized modification software from the computer, then edit out the "gs.apple.com" redirect from the hosts file, and then restart the computer for the host file changes to take affect. For steps to edit the Hosts file and allow iTunes to communicate with the update server, see iTunes: Troubleshooting iTunes Store on your computer, iPhone, iPad, or iPod—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > The hosts file may also be blocking the iTunes Store. If you do not uninstall the unauthorized modification software prior to editing the hosts file, that software may automatically modify the hosts file again on restart. Also, using an older or modified .ipsw file can cause this issue. Try moving the current .ipsw file, or try restoring in a new user to ensure that iTunes downloads a new .ipsw.
Error 3194: Resolve error 3194 by updating to the latest version of iTunes. "This device is not eligible for the requested build" in the updater logs confirms this is the root of the issue. For more Error 3194 steps see: This device is not eligible for the requested build above.
Above from:
http://support.apple.com/kb/TS3694#error3194

Batch Characteristic not updating with result for linked MIC

Hi,
I have created a MIC and linked to a batch characteristic i.e. potency and included the characteristic in a specific batch class. This MIC is part of the inspection plan for a certain material.
If I generate a lot of origin 01 and 09 for the material and record a result for the MIC and apply a UD, the batch characteristic is not updated with the result recorded in the batch master record..
If I generate a lot origin 89 for the same material, when the result is recorded for the MIC and apply a UD the batch characteristic is updated with the mic value in the batch master record.
Can you help regards?

Ok. I am a little bit further.
I put a trace (ST05) on the result recording and I find a difference between 4.7 and ECC6.0.
In ECC6.0 I've an deletion in table "AUSP". This deletion isn't performed in the 4.7 system.
Hope that this can help to solve my problem.
Regards,
René
@ Mayank
Above, all the master data and customizing is mentioned to transfer the result to the batch classification
Edited by: Rene Fuhner on Jul 30, 2010 7:03 PM

Purchase Order history is not updated with Invoice number

Hello Experts ,
Please suggest some inputs/solution for my problem.
Scenarios is :
PO --> SO --> Invoice
I am creating the invoice with the medium EDI , when I click on Save button IDOC is generated with the message " IDoc 'xxxxxxxxxxxxx' was created and forwarded for transmission " and it showing the status as 03 i.e, The IDoc was sent to an R/3 System or an external program via a transactional RFC ...but the problem is if I got to the Purchase Order history Its not updated with the Invoice number.
What could be the problem , please suggest.

Hi!
I'm not sure, in which process you link PO and SO. There are some different ways, which are totally different scenarios - if you need help here, describe more detailed.
Your invoice is probably only created with reference to SO, so check the invoice itself. In this case also the SO history should include the invoice.
Regards,
Christian

IPod not updating with iTunes

When I plug my iPod into the computer, it is not updating with iTunes.
The software version on iTunes is 1.2.1 and is the same on my iPod.
I did have a relapse last evening, as my iPod got confused. It stalled, so I had to drain the battery and recharg it. When I plugged it in today to the computer, it is not updating with iTunes - and I did update it to 7.1 version of iTunes, but the software version still says 1.2.1.
It also says my ipod is up to date with iTunes.
Please help.
Thanks,
Donnie

See if there's any help here.
iPod not recognized on a Windows laptop.
iPod not recognized on a Toshiba laptop.

While my iphone (6 plus) is synced with icloud, the contacts on icloud are several years old! My phone shows that it was backed up this morning to icloud. Any ideas on why icloud is not updated with my contacts?

While my iphone (6 plus) is synced with icloud, the contacts on icloud are several years old! My phone shows that it was backed up this morning to icloud. Any ideas on why icloud is not updated with my contacts?

Howdy Mishka2015,
The article linked below details a number of troubleshooting steps that can help resolve issues with your contacts and iCloud.
Get help using iCloud Contacts
https://support.apple.com/en-us/HT204150
Sincerely,
Allen

PI 7.1 - CPA Cache not updated with directory data.

Hi Gurus,
I have installed PI 7.1 and recently I refreshed my cache in partial and full mode. when I go to RWB->Cache monitoring -> Show Cache Status Table, I see following error for Central Adaptor engine.
<?xml version="1.0" encoding="ISO-8859-1"?>
<ConfirmationXML>
   <CacheRefreshError>
      <EngineType>
      AE
      </EngineType>
      <EngineName>
      af.sxd.mchir134
      </EngineName>
      <RefreshMode>
      C
      </RefreshMode>
      <GlobalError>
         <Message>
         CPA Cache not updated with directory data.
         </Message>
         <Trace>
         com.sap.aii.af.service.cpa.impl.exception.CPADirectoryCacheException: Failed to check secure connection configuration. Reason: com.sap.aii.af.lib.sld.SLDException: Failed to read SLD instance name. Reason: HTTP response code: 503 (Service Unavailable)
     at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDirectoryURL(DirectoryAccess.java:134)
     at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDeltaRefreshURL(DirectoryAccess.java:191)
     at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDeltaCacheUpdateXML(DirectoryAccess.java:440)
     at com.sap.aii.af.service.cpa.impl.cache.CacheManager.performCacheUpdate(CacheManager.java:491)
     at com.sap.aii.af.service.cpa.impl.cache.CacheManager$CacheUpdateRunnable.run(CacheManager.java:322)
     at com.sap.engine.frame.core.thread.Task.run(Task.java:73)
     at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:144)
     at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:242)
Caused by: com.sap.aii.af.lib.sld.SLDException: Failed to read SLD instance name. Reason: HTTP response code: 503 (Service Unavailable)
     at com.sap.aii.af.lib.sld.impl.SLDAccessor.getSLDInstanceName(SLDAccessor.java:471)
     at com.sap.aii.af.lib.sld.impl.SLDAccessImpl.getSLDInstanceName(SLDAccessImpl.java:96)
     at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDirectoryURL(DirectoryAccess.java:119)
     ... 7 more
Caused by: com.sap.aii.utilxi.sld.SldReadFailedException: HTTP response code: 503 (Service Unavailable)
     at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:126)
     at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:142)
     at com.sap.aii.af.lib.sld.impl.SLDAccessor.getSLDInstanceName(SLDAccessor.java:458)
     ... 9 more
Caused by: com.sap.lcr.api.cimclient.LcrException: com.sap.lcr.api.cimclient.CIMClientException: HTTP response code: 503 (Service Unavailable)
     at com.sap.aii.utilxi.sld.SldProxy.getXISubSystem(SldProxy.java:526)
     at com.sap.aii.utilxi.sld.XIEntityInSld.getInstFromSld(XIEntityInSld.java:494)
     at com.sap.aii.utilxi.sld.XIEntityInSld.readFromSld(XIEntityInSld.java:156)
     at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:120)
     ... 11 more
         </Trace>
      </GlobalError>
      <GlobalError>
         <Message>
         Confirmation handling failed.
         </Message>
         <Trace>
         com.sap.aii.af.service.cpa.impl.exception.CPADirectoryCacheException: Failed to check secure connection configuration. Reason: com.sap.aii.af.lib.sld.SLDException: Failed to read SLD instance name. Reason: HTTP response code: 503 (Service Unavailable)
     at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDirectoryURL(DirectoryAccess.java:134)
     at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getConfirmationURL(DirectoryAccess.java:162)
     at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.invokeConfirmationURL(DirectoryAccess.java:462)
     at com.sap.aii.af.service.cpa.impl.cache.CacheManager.performCacheUpdate(CacheManager.java:603)
     at com.sap.aii.af.service.cpa.impl.cache.CacheManager$CacheUpdateRunnable.run(CacheManager.java:322)
     at com.sap.engine.frame.core.thread.Task.run(Task.java:73)
     at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:144)
     at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:242)
Caused by: com.sap.aii.af.lib.sld.SLDException: Failed to read SLD instance name. Reason: HTTP response code: 503 (Service Unavailable)
     at com.sap.aii.af.lib.sld.impl.SLDAccessor.getSLDInstanceName(SLDAccessor.java:471)
     at com.sap.aii.af.lib.sld.impl.SLDAccessImpl.getSLDInstanceName(SLDAccessImpl.java:96)
     at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDirectoryURL(DirectoryAccess.java:119)
     ... 7 more
Caused by: com.sap.aii.utilxi.sld.SldReadFailedException: HTTP response code: 503 (Service Unavailable)
     at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:126)
     at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:142)
     at com.sap.aii.af.lib.sld.impl.SLDAccessor.getSLDInstanceName(SLDAccessor.java:458)
     ... 9 more
Caused by: com.sap.lcr.api.cimclient.LcrException: com.sap.lcr.api.cimclient.CIMClientException: HTTP response code: 503 (Service Unavailable)
     at com.sap.aii.utilxi.sld.SldProxy.getXISubSystem(SldProxy.java:526)
     at com.sap.aii.utilxi.sld.XIEntityInSld.getInstFromSld(XIEntityInSld.java:494)
     at com.sap.aii.utilxi.sld.XIEntityInSld.readFromSld(XIEntityInSld.java:156)
     at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:120)
     ... 11 more
         </Trace>
      </GlobalError>
   </CacheRefreshError>
</ConfirmationXML>
Please suggest the solution.
Thanks,
Surendra

Guys,
I have the same issue. Any help on this is appreciated!
Issue log from CPA cache refresh
<?xml version="1.0" encoding="UTF-8" ?>
- <CacheRefreshError>
<EngineType>AE</EngineType>
<EngineName>af.sxd.pl1vw158</EngineName>
<RefreshMode>C</RefreshMode>
- <GlobalError>
<Message>CPA Cache not updated with directory data.</Message>
<Trace>com.sap.aii.af.service.cpa.impl.exception.CPADirectoryCacheException: Failed to check secure connection configuration. Reason: com.sap.aii.af.lib.sld.SLDException: Failed to read SLD instance name. Reason: HTTP response code: 503 (Service Unavailable) at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDirectoryURL(DirectoryAccess.java:134) at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDeltaRefreshURL(DirectoryAccess.java:195) at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDeltaCacheUpdateXML(DirectoryAccess.java:448) at com.sap.aii.af.service.cpa.impl.cache.CacheManager.performCacheUpdate(CacheManager.java:457) at com.sap.aii.af.service.cpa.impl.cache.CacheManager$CacheUpdateRunnable.run(CacheManager.java:291) at com.sap.engine.frame.core.thread.Task.run(Task.java:73) at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:162) at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:260) Caused by: com.sap.aii.af.lib.sld.SLDException: Failed to read SLD instance name. Reason: HTTP response code: 503 (Service Unavailable) at com.sap.aii.af.lib.sld.impl.SLDAccessor.getSLDInstanceName(SLDAccessor.java:505) at com.sap.aii.af.lib.sld.impl.SLDAccessImpl.getSLDInstanceName(SLDAccessImpl.java:96) at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDirectoryURL(DirectoryAccess.java:119) ... 7 more Caused by: com.sap.aii.utilxi.sld.SldReadFailedException: HTTP response code: 503 (Service Unavailable) at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:133) at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:150) at com.sap.aii.af.lib.sld.impl.SLDAccessor.getSLDInstanceName(SLDAccessor.java:492) ... 9 more Caused by: com.sap.lcr.api.cimclient.LcrException: com.sap.lcr.api.cimclient.CIMClientException: HTTP response code: 503 (Service Unavailable) at com.sap.aii.utilxi.sld.SldProxy.getXISubSystem(SldProxy.java:527) at com.sap.aii.utilxi.sld.XIEntityInSld.getInstFromSld(XIEntityInSld.java:553) at com.sap.aii.utilxi.sld.XIEntityInSld.readFromSld(XIEntityInSld.java:165) at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:127) ... 11 more</Trace>
</GlobalError>
- <GlobalError>
<Message>Confirmation handling failed.</Message>
<Trace>com.sap.aii.af.service.cpa.impl.exception.CPADirectoryCacheException: Failed to check secure connection configuration. Reason: com.sap.aii.af.lib.sld.SLDException: Failed to read SLD instance name. Reason: HTTP response code: 503 (Service Unavailable) at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDirectoryURL(DirectoryAccess.java:134) at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getConfirmationURL(DirectoryAccess.java:166) at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.invokeConfirmationURL(DirectoryAccess.java:470) at com.sap.aii.af.service.cpa.impl.cache.CacheManager.performCacheUpdate(CacheManager.java:576) at com.sap.aii.af.service.cpa.impl.cache.CacheManager$CacheUpdateRunnable.run(CacheManager.java:291) at com.sap.engine.frame.core.thread.Task.run(Task.java:73) at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:162) at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:260) Caused by: com.sap.aii.af.lib.sld.SLDException: Failed to read SLD instance name. Reason: HTTP response code: 503 (Service Unavailable) at com.sap.aii.af.lib.sld.impl.SLDAccessor.getSLDInstanceName(SLDAccessor.java:505) at com.sap.aii.af.lib.sld.impl.SLDAccessImpl.getSLDInstanceName(SLDAccessImpl.java:96) at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDirectoryURL(DirectoryAccess.java:119) ... 7 more Caused by: com.sap.aii.utilxi.sld.SldReadFailedException: HTTP response code: 503 (Service Unavailable) at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:133) at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:150) at com.sap.aii.af.lib.sld.impl.SLDAccessor.getSLDInstanceName(SLDAccessor.java:492) ... 9 more Caused by: com.sap.lcr.api.cimclient.LcrException: com.sap.lcr.api.cimclient.CIMClientException: HTTP response code: 503 (Service Unavailable) at com.sap.aii.utilxi.sld.SldProxy.getXISubSystem(SldProxy.java:527) at com.sap.aii.utilxi.sld.XIEntityInSld.getInstFromSld(XIEntityInSld.java:553) at com.sap.aii.utilxi.sld.XIEntityInSld.readFromSld(XIEntityInSld.java:165) at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:127) ... 11 more</Trace>
</GlobalError>
</CacheRefreshError>
Regards

Previews in Bridge CS5 not updating with changes in Photoshop CS5

Similar Messages

Maybe you are looking for