Previews not displaying in split view in Aperture

Recently Aperture has stopped displaying previews for a number of photos (but strangely not all) when in split view. If I switch to browser view the previews are all there, and if I then return to split view they are back to being displayed. But if I move to another project and then return to the first they are gone again. I have repaired the Aperture database with no change, but not yet rebuilt it. This change in behaviour was not concurrent with an Aperture update. However there have been lots of updates affecting 10.8.2 since the most recent version of Aperture. Any thoughts?
Thanks,
Bob
Aperture 3.4.3
OS X 10.8.2
Late 2009 MacBook

Here is an image of Aperture without Viewer

Similar Messages

PreE V8: Clips not displaying in project view

I have a clip in the my timeline/sceneline that is not displaying in Project view. It also does not have the "P" in the bottom corner of the thumbnail in Organizer view. Why isn't the clip considered part of the project?

I have been shooting in XP+ mode and have been for the past year.
I haven't tried using the Premier Elements Get Media function. I usually import both still images from one camera and the video from this camera at the same time into the same Photoshop album and use Organizer. Also there are some training videos and books that tell you to use Organizer.
I tried importing a video file using the Get Media function and was able to use the set in/out points and have them saved correctly.
Then in the project that I am working on I took one of video files that I imported through the Organizer and deleted it from the catalog. Then I imported it using the Get Media function and put it in the album with the other files. Then I used Preview to set in/out points. Those points were saved correctly.
So know I will delete all the remaining video files from the catalog that I haven't yet used in my project and then remote them through Premiere's Get Media.
So it appears that as you thought, I need to use Get Media to import video files. But that is not emphasized in any documentation. I think there should be a warning when importing video files in Organizer saying that if you intend to use Premier Elements to edit them that they should be imported via that product.
Thank you for your assistance.

Design Window is not displaying the correct view

Hi
For some reason the Design View on my CS3 is not displaying
the correct view.
It used to show how the web page would look but it is simply
showing up the wording and pictures surrounded by dotted black
lines.
I am using a template as a bases for all the pages and all
the pages are showing like this.
My other sites are showing up OK though.
When I Preview in Browser, it all shows up OK.
Can anyone help?
Bezz

VIEW | Style Rendering > Display Styles
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Bezz333" <[email protected]> wrote in
message
news:fttdsr$394$[email protected]..
> Hi
>
> For some reason the Design View on my CS3 is not
displaying the correct
> view.
>
> It used to show how the web page would look but it is
simply showing up
> the
> wording and pictures surrounded by dotted black lines.
>
> I am using a template as a bases for all the pages and
all the pages are
> showing like this.
>
> My other sites are showing up OK though.
>
> When I Preview in Browser, it all shows up OK.
>
> Can anyone help?
>
> Bezz
>

Code not displaying in code view

When searching for a particular feature, I may have clicked on something by accident. Now, my site looks and works fine in the browser and in design and live view, but the code is not displaying in code view. See attached image.
Anyone know how to fix this??? Thank you in advance!

Have you tried restarting everything?

Approval Center Preview Updates not displaying a populated Views list

Goal is to be able to add Baseline fields to Preview Updates.
In trying to edit the view in Approval Center other entries ("change the view of Approval center" and "Adding the baseline (tracking) columns to the Approval Center view") indicate the solution is to use the View in Preview Updates
and imply that the Tasks Tracking view is the view to update for Preview Updates.
However, the view that I am seeing in Preview Updates does not
match any view within Manage Views, including Tasks Tracking.
The Preview Updates displays the following columns:
ID
Mode
Task Name
Previous Duration
Duration
Previous Start
Start
Previous Finish
Finish
Baseline Work
Work
Previous % Complete
% Complete
Resource Name
The Tasks Trackingview already includes Baseline Start/Baseline Finish (and other differences) ... so not the view being used.
Within Project Center after selecting a project and then selecting Schedule the view list has all expected views defined in Manage Views > Project.
But within Preview Updates the View drop down does not invoke a list of views. So now I am wondering if this is the root problem for this issue I am having.
Cheryl

Hi Cheryl,
I just tested your concern in my Project Online instance. As far as I know, there are no significative changes in the preview updates feature between 2010 and 2013 versions.
As I said in your previous post, you are several views available in the "preview updates" page (unfortunately in french).
Those views are the project views that are not related to resources and assignments, meaning all the "... tasks" project views should be available in the preview updates page. Then just edit one of those view adding your fields and save it.
I tried to edit the task summary project view, adding a few field like bsaeline start and finish and it worked perfectly. Note that each field impacted by the update will be duplicated, for example the start date will be duplicated to a "previous start date"
field.
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS |

Preview not displaying List View Data past first row

I guess this is a simple question. I have my Excel model working the way I wish it to. The components before preview are functioning accordingly. When Preview is run, the data in the two spreadheet tables is not displayed past the first row.
Basically, is there some gremlin within Flash that is ignoring or deleting the functions (VLOOKUP) in the targeted display area? By all rights, this should be working, and I am kind of surprised that it isn't

If the data is static, it will display. My research turned up that VLOOKUP and HLOOKUP functions will not display after the first row of data.
Source: Xcelsius 2008 Dashboard best Practices by Loren Abdulezer, pages 407-408
My problem is that in making the data dynamically selectable, and using multiple functions to bring results to the top of the spreadsheet instead of their respective locations; it has created a situation where I have an Excel model that works, but an Xcelsius model that does not.
Doesn't look like there really is a solution to what I am trying to do, short of completely rebuilding the model, which I do not have the ability to replicate.

Printing not working via "Faces" view in Aperture 3

When I select a photo via the "Faces" view and then attempt to print, Aperture doesn't present a Print window- nothing happens. When though I select the same pic (or any other) via the "Split Pane" view, Printing works fine. I'm running A3.2.3 on Lion, Intel iMac. Any suggestions?

This is a know behavior see Why is it not possible to print pictures from Aperture´s folder "faces"? (Aperture 3.2.2) among others.

Forms created in Acrobat Pro XL do not display data when viewed on iPads

I have a simple form that when completed and saved as an Acrobat Pro XL document and then emailed to customers, do not display the field contents of the form when viewed on iPads. So the customers just see a blank form. I have tried to use Optimize for Web and Moblie to solve this, but it appears that many times, since the iPads are so prevalent, that people can;t see the full content of the form that I send. Is there a solution for this?

When your customers opened the PDF form (which was as an email attachment) on iPads, it is highly likely that Apple Mail (not Adobe Reader for iOS) was displaying the preview of the PDF form. Please note that Apple products on iPad/iPhone (e.g. Apple Mail, iBooks, Safari) do not render field contents or annotations (sticky notes, highlight, underline, strikeout, freehand drawing, etc.) in PDF documents.
The Mail sections of the following FAQ documents describe how to open PDF attachments in Adobe Reader for iOS.
For iPad, see How to get PDF documents into Adobe Reader for iOS (iPad on iOS 7 version)
For iPhone, see How to open PDF documents in Adobe Reader for iOS (iPhone on iOS 7 version)
Please let us know if you have additional questions.

Why is Preview not displaying fonts correctly?

Since the last Snow Leopard upgrade, Preview is not displaying some fonts correctly. I checked to see if the fonts were embedded in the PDF (by resorting to Adobe Acrobat 5... which is not displaying them correctly either) and they are True Type with Windows encoding which as far as I know Preview OS X should be able to handle.
I tried deleting the Preview preferences in User/Library/Prefeerences and restarting but this made no difference. The same PDF works perfectly though on an old iMac that is running OS X Tiger!!!

Well I found a few minor font problems which seem to have cropped up since the last system upgrade, but none of those were the font in question. Also, as I understand it, the whole point of PDF documents is that the fonts are embedded in the document so you do not have to have the fonts installed on your computer to view the PDF properly. I use a lot of special fonts and when I save documents as a PDF I can send them to anyone on the internet and they can usually see everything as it is meant to be.

Page not displaying in outline view.

One of the pages in a site is not displaying in the outline view of CS2. Does this view have,, well different views. The page displays in source, preview, pdf preview & browser preview but nothing is displayed in outline. All other pages display in the outline view. I have closed the file, closed GL & rebooted but still views as blank just a flashing cursor top left. If I go from outline to source the cursor is immediately after </body>. I am thinking that I am viewing after the body and seeing nothing.Thanks

Hi,
After opening NWDS in Webdynpro explorer. Go to Window-> show view and select outline.
you will get the outline editor where you can desing the layout for the views.
hope it helps you.
Raghu

JavaScript does not display in Design view

Hi,
I am just starting to learn JavaScript so excuse my, maybe stupid, questions.
Why the following code does not display Hello world! in Split view on the "design" side? When I upload the file onto the server and try to view it in the browser everything displays normally.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
<title>Homepage</title>
</head>
<body>
<script type="text/javascript">
document.write("Hello World!");
</script>
</body>
</html>

Hi,
This is normal, design view is simply a way of either creating your website using the wysiwyg method or if you code the website it is a way of getting an idea what the site will look like static. Design view doesn't run any scripts, which is why in the more recent versions of dreamweaver we have LiveView which does run the scripts and allow you to interact with drop down menus and the like, which you can't do in DesignView.
Richard

My subscribed calendar does not display in today view in iOS7. Does anyone know how to make it show up?

I have a subscribed calendar on my iPhone. The today view in notification center shows that I have an event at xxxx and tomorrow view says I have x events but the calendar day view does not display any of the events. I need this so I can easily see which rooms my events are in. Dows anyone know how to make the subscribed calendar show up in calendar day view?

Interesting. May have uncovered a bug. It seems that limited duration events will display, but all day events wont on mine. (iPhone 5). Does that compare to what you are seeing (unfortunately, I have nothing in a subscribed calendar until the week end, so difficult to check. I do seem to recall seeing an event from one this past week end on the iPad, however).

TranslateMarkup output not displaying in design view

Hi
I'm trying to take a set of php pages which all follow a similar style
<?php
$p=new page();
$p->rightCol=<<<RC
SOME HTML GOES HERE
RC;
$p->mainContent=<<<MC
SOME OTHER HTML GOES HERE
MC;
This then pulls in various other files (css, js etc) and renders on the website. I'm used to working with an IDE and hand-writing php code. My non-technical colleague would like to edit the html using WYSIWYG and is used to using DW. At the moment the html in the heredoc strings doesn't display in design view. I've been trying to rejig the pages using translators and can convert the above php into html which renders fine in a browser. The html output from the translateMarkup function doesn't display in design view. I think I'm probably fighting a losing battle (for instance I'm not sure how I'm going to make html editable in DW even if I can get it to render), but if anyone could explain why the html won't render I'd be very grateful. My translator is
<html>
<head>
<title>Conditional Translator</title>
<meta http-equiv="Content-Type" content="text/html; charset=">
<script language="JavaScript">
function translateMarkup(docNameStr, siteRootStr, docContent){
//Find the right col stuff, delimited by <<<RC\n and RC;\n
var regexRC=/<<RC([\s\S]*)RC;/;
var regexMC=/<<MC([\s\S]*)MC;/;
var rcContent = regexRC.exec(docContent)[1];
var mcContent = regexMC.exec(docContent)[1];
var ret = (getHeader()+'<main>'+mcContent+'</main><aside id="rightcol">'+rcContent+'</aside>'+getFooter());
return ret;
function getTranslatorInfo() {
var transArray = new Array(6);
transArray[0] = "LG_TRANS";
transArray[1] = "Translates for LG";
transArray[2] = "1";
transArray[3] = "php";
transArray[4] = "0";
transArray[5] = "allFiles";
transArray[6] = "50";
return transArray;
function getHeader() {
return '<!DOCTYPE html><html><head><title>TEST</title></head><body>';
function getFooter() {
return '</body></html>';
</script>
</head>
<body>
</body>
</html>

unless there's any way of rewriting the files before upload and download (ie dynamically rewrite the php pages as html before dreamweaver opens them, then rewrite them back as php before they're uploaded - I'm clutching at straws).
I believe that this should be possible but I'm definitely not a DW extensionologist so I couldn't say for sure. Also, I believe that the tricky part would be the last step -> WYSIWYG edits back to PHP, which may well be impossible.
If you want to talk to someone who knows DW inside out, contact the guys at http://www.projectseven.com. They are excellent.

PDF's in Mail and Preview not displaying correctly

Ever since upgrading to Yosemite PDF's are not displaying correctly. Every time i generate a PDF of a sales quote it seems to lose a lot of information.
But the strange thing is.....
Preview and Mail both show PDF with missing text.
When I open using "Quick Look Attachment" within Mail or Adobe Acrobat it looks perfect.
When emailed, recipients (mostly Windows users) seem to have no problem opening it and seeing all text.
So far seen that issue is only in Preview and Mail
Only has happened since upgrading to Yosemite
PDF is created using web based ZOHO CRM to build quotes.
See image below to see the difference in what Mail and Preview sees compared with how other apps open the same PDF.
NOTE: sensitive info has been purposely blurred on image.

Do a backup, using either Time Machine or a cloning program, to ensure files/data can be recovered. Two backups are better than one.
Try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
Isolating an issue by using another user account
Try booting into the Safe Mode using your normal account. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear and again when you log in. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don’t do them all at once.
Safe Mode - Yosemite
Safe Mode - About

Files not displaying in list view?

I recently upgraded my MacPro (early 2008 8core) from Snow Leopard (10.6.8) to Lion.
At first i wanted to do a fresh install on my machine but soon realised it wasnt possible to import old accounts from another internal drive so i opted to upgrade the system instead.
After doing so I was faced with an odd problem of files not displaying in my finder windows when switching through internal drives or changing from 'file view' to 'list view' or 'column view' etc...
The attached screenshots were taken in sequence youll also note that the path bar & top window name dont update either.
The relevant drives are in healthy condition with several tests run over them to ensure their healthy(Disk Utility & Drive Genius). I have also run permissions repair, and a utility to empty cahces etc (OnyX). From what i can see its possibly something to do with the Finder not updating or refreshing the window? The issue seems to be isolated to the drives however intermittently the problem exists deeper into the directory on 'TerraTank' Volume.
The finder also crashes semi-frequently and the problem seems to dispaear for a while and revealing the contents of these volumes for a few mins.
I have also checked activity monitor to see if any particular process was going haywire and all seemed relativly normal.
Has anyone else experienced this problem?
Regards,
JP

Onyx may be causing problems. Don't use it on a non-backed up system, as cleaning caches may damage them, and make things not work. Make sure your Spotlight indexes all drives you wish to be searchable. Go to Apple menu -> System Preferences -> Spotlight and add each hard drive to the Privacy section, and then remove it again. Then click on the Spotlight menu every half hour to see when it stops saying that it is indexing. It might take a few hours. But once done, it should be fixed.

Previews not displaying in split view in Aperture

Similar Messages

Maybe you are looking for