Previous archives not visible in import dialogue

I archived tape based material in FCP X 6 months ago onto an external harddisk, copied now those archived files to my new Promise Pegasus R4. Those copied archive files won't show up in the Import Media dialogue under "Archives". If I connect the original extrernal drive with the archives they show up... What's wrong? Me or FCP? Any advice highly appreciated.
Thanks
Uli

Thanks Tom, couldn't find an answer to this elsewhere... It is just about to talk to the right guys...

Similar Messages

IDOC not visible to import to XI, but on R/3 created and released

Hi guys!
I have problem with import IDOC into my repository objects. It is not visible to import, but on the r/3 side it is created and released.. Other IDOCs are visible, but not the one I need.. The IDOC I need is custom, created few moments ago..
What could be wrong?
Thanx for answer!
Olian

Olian,
you need to release our IDOC to be visiable for XI.
goto we60 see if you can find the our ZIDOC if you dont then goto WE30 then type our IDOC then goto Edit tab on top and select set release.
if you have done this then do this
T/C Code: WE82
pass the IDOC type , message type and sap version then save.
now our output types andIDOC assigments to IDOC types are done
Regards
Sreeram.G.Reddy
Message was edited by:
Sreeram Reddy

Imported Archive not visible

Hi Guru,
I have imported into XI a XSLT Mapping in IMPORTED ARCHIVE; now I have to use thi mapping in my Interface Mapping, but the imported Archive (the XSLT Mapping...) is not visible! How is it possible?
Thanks to all!

hi,
1. Make sure that the XSLT program .zip or jar format.
2. If the mapping program it' not showing then forceble you need to push your interface mapping.
If the mapping program it is not showing mean particular source message particular target message couldn't defind the mapping program..this is not complesary any mapping program we can push through forceble .
Regards,
Venu.

LR4 does not auto launch import dialogue box after one card is imported.

hi all,
I upgraded to LR4 from LR3. Running it on a new iMac with mountain lion. LR4 says its up to date.
If I'm importing images from multiple cards LR4 will auto detect the first card and bring up the import dialogue box, import the images and then eject that card. When I pop in the next card there's no automatic import dialogue box and I have to go to the drop down menu to get it to launch. After the second card imports it doesn't auto eject and I have to do it manually. Auto detect is checked. Eject after import is checked. And the LR4 app is open (not trying to launch LR when I put a card in).
I did some searches with no luck so if there is a thread on it please send me the link.
Thanks everyone!

Hi Rikk,
I've never used Apples Image Capture app but I checked the app anyway and didn't see anything in its prefereces for detecting media. I also haven't installed any of the camera manufacturer's software as it's a new machine.
Right now, with no apps open, inserting a card into my reader doesn't open any app like iphoto etc (which is how I prefer it).
The card does show up in my finder and on the desktop.
I did a migration assistant from my old computer to get cs over onto the new computer so lightroom 3 is on this machine but it's not activated.
In lightroom 3, when it was open, any time I popped in a card the import dialogue would appear. It lightroom 4 it will only detect the first time a card is inserted upon opening the application. So if i have 6 cards to import it will only auto detect and launch the import dialogue for the first card and not any of the others.
any other thoughts?

IMovie 11 import camera/archive not displaying movies, import not possible

Guys,
hope anyone can help me with this one:
I had some issues with my iMac lately crashing with kernel panics. It crashed (kernel panic) while i was importing some HD material into iMovie 11. ever since, I cannot see any movie thumbnails in the import view (the actual movies are still on the camera/SD card. Also importing from iSight is not possible. The green light next or the camera is on, while no window or an empty import window is visible.
I did delete the whole iLife 11 suit, incl. all references to iMovies (preferences,...) and then a complete reinstall and updated all again.
Unfortunately no luck so far.
Any tips or thoughts what I could do next as I really don't want wipe and reinstall all on my mac again?
Cheers from DownUnder
Le Jones

Hi,
My problem is very similar. I am able to choose the Archive folder and import the footage that way. However, I am only able to do that once. If I try again, it states the file is not a camera archive format file.
The only way I can get it to work again is to completely close out iMovie and restart. Then I can import an archived file. But then again, only once before I have to restart iMovie to get it to work again.
Anyone have any workarounds?
Thanks

Flash not visible after importing to a new app

hi all,
I copied a piece of flash from a previous application (that
works perfectly) into a jsp in a new app. I imported the file,
changed the relevant file paths and it doesn't work at all. Also,
for some reason there's a problem with the embed tag at the end
(i.e. green squiggle).
the following is the code:
<object
classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=5,0,0,0"
width="300" height="300">
<param name="_cx" value="7938">
<param name="_cy" value="7938">
<param name="FlashVars" value="-1">
<param name="Movie" value="../Flash/Trademarks2.swf">
<param name="Src" value="../Flash/Trademarks2.swf">
<param name="WMode" value="Window">
<param name="Play" value="-1">
<param name="Loop" value="-1">
<param name="Quality" value="High">
<param name="SAlign" value>
<param name="Menu" value="-1">
<param name="Base" value>
<param name="AllowScriptAccess" value="always">
<param name="Scale" value="ShowAll">
<param name="DeviceFont" value="0">
<param name="EmbedMovie" value="0">
<param name="BGColor" value>
<param name="SWRemote" value><embed
src="../Flash/Trademarks2.swf" quality="high" pluginspage="
http://www.macromedia.com/shockwave/download/index.cgi?P1_Prod_Version=ShockwaveFlash"
type="application/x-shockwave-flash" width="300" height="300"
align="right">
</object>
if anyone could shed any light on the subject, i would be
most grateful!!

now that u say it, it would have made more sense to put the message in a different forum. I'm new to all this and just cause i'm using jdev, i straight away thought of this forum. silly me!
in answer to ur question there are no messages. when i run the app and put the cursor over where the flash should be, u can see the outline of the box and thats it.
i just cant understand why its not working when all appears to be as it should and i know it worked previously. but then again i am new to this and its most likely something stupid i'm doing...

Partition index are not visible after import in 11g

Hi,
target database : oracle version : 11.2.0.1
Source database : 10.2.0.4
i have a table in 10.2.0.4 and need to transfer to 11.2.0.1
SQL> SELECT i.index_name, i.partition_name
FROM dba_ind_partitions i, dba_tab_partitions t
WHERE i.partition_name = t.partition_name
AND t.table_name = 'BKPG';
2    3    4
INDEX_NAME                     PARTITION_NAME
I_BKPG_ACT_REC_IDX             BKPG_2010_JUN_DEC
I_BKPG_ACCT_ACTD_REC_IDX       BKPG_2010_JUN_DEC
I_BKPG_ACCT_REC_ACT_IDX        BKPG_2010_JUN_DEC
I_BKPG_STLM_REC_ACC_IDX        BKPG_2010_JUN_DEC
I_BKPG_STLM_ACC_REC_IDX        BKPG_2010_JUN_DEC
I_BKPG_ORD_IDX                 BKPG_2010_JUN_DEC
I_BKPG_TDATE_REC_BS_IDX        BKPG_2010_JUN_DEC
I_BKPG_CUSIP                   BKPG_2010_JUN_DEC
I_BKPG_ACCT_TRDDTE_REC_IDX     BKPG_2010_JAN_JUN
I_BKPG_ACCT_ACTD_REC_IDX       BKPG_2010_JAN_JUN
I_BKPG_TDATE_REC_BS_IDX        BKPG_2010_JAN_JUN
INDEX_NAME                     PARTITION_NAME
I_BKPG_ACCT_REC_ACT_IDX        BKPG_2010_JAN_JUN
I_BKPG_ACT_REC_IDX             BKPG_2010_JAN_JUN
I_BKPG_ORD_IDX                 BKPG_2010_JAN_JUN
I_BKPG_STLM_ACC_REC_IDX        BKPG_2010_JAN_JUN
I_BKPG_ACCT_TRDDTE_REC_IDX     BKPG_2010_JUN_DEC
I_BKPG_CUSIP                   BKPG_2010_JAN_JUN
I_BKPG_STLM_REC_ACC_IDX        BKPG_2010_JAN_JUN
18 rows selected.i took the export of this table and during import i used follwing parameters
impdp directory=TEST transform=segment_attributes:n REMAP_SCHEMA=dev:prakash1 dumpfile=BKPG1.dmp -> as to avoid the storage clause error i used transform=segment_attributes:n
import went sucessfull but if i query below sql zero rows returns
SQL> SELECT i.index_name, i.partition_name
FROM dba_ind_partitions i, dba_tab_partitions t
WHERE i.partition_name = t.partition_name
AND t.table_name = 'BKPG';
2    3    4
no rows selectedwhy i am not able to query partitions index , please advice
Thanks

Thanks for the update,
i am unbale to see these index partitions in the views dba_ind_partitions but i am able to see in dba_objects;
I_BKPG_ACCT_TRDDTE_REC_IDX               INDEX PARTITION
OBJECT_NAME                              OBJECT_TYPE
I_BKPG_ACCT_TRDDTE_REC_IDX               INDEX PARTITION
I_BKPG_ACCT_TRDDTE_REC_IDX               INDEX PARTITION
I_BKPG_ACCT_TRDDTE_REC_IDX               INDEX PARTITION
I_BKPG_ACCT_TRDDTE_REC_IDX               INDEX PARTITION
I_BKPG_ACCT_TRDDTE_REC_IDX               INDEX PARTITION
I_BKPG_ACCT_TRDDTE_REC_IDX               INDEX PARTITION
I_BKPG_ACCT_TRDDTE_REC_IDX               INDEX PARTITION
I_BKPG_ACCT_TRDDTE_REC_IDX               INDEX PARTITION
I_BKPG_ACCT_TRDDTE_REC_IDX               INDEX PARTITION
I_BKPG_CUSIP                             INDEX PARTITION
I_BKPG_CUSIP                             INDEX PARTITION
OBJECT_NAME                              OBJECT_TYPE
I_BKPG_CUSIP                             INDEX PARTITION
I_BKPG_CUSIP                             INDEX PARTITION
I_BKPG_CUSIP                             INDEX PARTITION
I_BKPG_CUSIP                             INDEX PARTITION
I_BKPG_CUSIP                             INDEX PARTITION
I_BKPG_CUSIP                             INDEX PARTITION
I_BKPG_CUSIP                             INDEX PARTITION
I_BKPG_CUSIP                             INDEX PARTITION
I_BKPG_CUSIP                             INDEX PARTITION
I_BKPG_CUSIP                             INDEX PARTITION
I_BKPG_CUSIP                             INDEX PARTITION
.why i am unable to see in dba_ind_partitions view
Thanks

Files in ZIP Archive not visible in XP explorer

I have a strange problem. I'm sure the solution is something simple, but I seem to be overlooking it. I am creating a .zip archive from within my Java app, zipping up 5-10 straight text files. From what I can tell the file gets created successfully. After the .zip file is created, I can do a jar -tf on the file and it will show them all to me. I can also programatically get a list of the files in the archive and it all looks correct. However, when I try opening the archive file from the Windows XP file explorer (or extracting it to a location) it says that there are no objects in the archive.
Here is the code I am using to create the zip file:
   byte[] buf = new byte[1024];
   try {
      String outputFilename = "somefile.zip"; // The output archive
      ZipOutputStream outStream = new ZipOutputStream(new FileOutputStream(outputFilename));
      System.out.println("createZip: zipping "+_files.length+" files.");
      // _files is an array of c:\somedir\somefile.txt file listings
      for (int i=0; i<_files.length; i++) {
        System.out.println("Adding entry: "+_files);
FileInputStream in = new FileInputStream(_files[i]);
outStream.putNextEntry(new ZipEntry(_files[i]));
int len;
while ((len = in.read(buf)) > 0) {
outStream.write(buf,0,len);
outStream.closeEntry();
in.close();
outStream.finish();
outStream.close();
rv = true;
// ... catch, return value, etc.
Any suggestions or hints would be greatly appreciated..

We had a similar problem
It turned out to be a feature and not a bug
Actually 'vanilla' XP handles those files and is able to open them and it seems that the problem appears only after updating the XP to fix the vulnerability described in:
http://www.microsoft.com/technet/treeview/default.asp?url=/technet/security/bulletin/MS02-054.asp
What we have determined is that if the zip file contains '/' at the begining of the path - the compressed folder utility will refuse to open it and will show only a blank pane in explorer. Removing the '/' from path in zip file solves the problem on updated Windows XP.

Exchange 2010 Enterprise - Online Archive not visible in office 2013 professional plus and mailbox shared

Hi!
Outlook 2013 professional plus was working perfectly weeks ago, then out of nowhere new profiles doesn't have visible in Outlook the online archive and the shared mailboxes, however it shows up in OWA.
It was given full permission for those users with no results, online archive is enabled, profiles were already deleted and recriated.
The older profiles work perfectly.
We have the services ActiveSync, Autodiscover, Outlook Anywhere, OWA and they're all working with no errors.
Regards
Tiago Barradas

Hi Tiago,
From your description, OWA works work, so your Exchange server is ok.
I recommend you check the following thing for troubleshooting:
Please configure a mail profile with another user who has an Online Archive on that machine and check the result. If it works well, there is something with the problematic mailbox. If the issue persists, the issue is related to your Outlook.
Hope it helps.
Best regards,
Amy
Amy Wang
TechNet Community Support

Exchange 2010 Enterprise – Online Archive not visible in Office 2013 Professional Plus and the Share mailbox.

Hi!
Outlook 2013 professional plus was working perfectly weeks ago, then out of nowhere new profiles doesn't have visible in Outlook the online archive and the shared mailboxes, however it
shows up in OWA.
It was given full permission for those users with no results, online archive is enabled, profiles were already deleted and recriated.
The older profiles work perfectly.
We have the services ActiveSync, Autodiscover, Outlook Anywhere, OWA and they're all working with no errors.
Regards

Hi,
According to my known, this issue could be caused by Outlook cannot reach SCP so cannot get autodiscover.xml.Issue with creating folders caused by missing on TS following registry entry:
HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Office\15.0\Outlook\Namespaces\{0006F017-0000-0000-C000-000000000046}\FolderTypes
Could you please check it?

Mail messages not visible after importing from entourage

I received confirmation that messages have been imported sucessfully from entourage and the imported folders have unread messages sitting in the folders. However when i try to open folder it is empty. Can anybody help?
I am running mail 2.0.5. I thought the best solution would be to reload mail application again but i cannot locate download for mail application.

I need help also - to anyone out there - after importing the data from Entourage, in addition to missing messages, my mail.app is now running so slow (both downloading messages and opening messages).
The mail.app "Help" is also not opening up.
I wanted to re-load the software also to see if it will correct everything but do not know where to get the application from - is this the best thing to do or what alternatives are there?
Thanks,
gailp

Preview images not visible in Import dialog box

I can't see images when Importing RAW files from Nikon D80.
"Show Preview" is checked.
I see a file marker and the filename.
Import functions okay otherwise.
Do I need Camera Raw 3.7 in Lightroom?
I have it in Elements 5.0.

What OS? Can you see previews okay in Finder/Explorer?
Don
Don Ricklin, MacBook 1.83Ghz Duo 2 Core running 10.4.9 & Win XP, Pentax *ist D
http://donricklin.blogspot.com/

Previous purchases not visible under Purchase tab

None of the purchased software shows up under my Purchased tab in AppStore!
How is that possible?
How can I get back my purchased items and redownload some of them?

iTunes Store: Hiding and unhiding purchases
http://support.apple.com/kb/HT4919
Mac App Store: Hiding and unhiding purchases
http://support.apple.com/kb/HT4928

Not able to import IDOC in SAP XI through SAP....

Hi,
I am able to see the IDOC in SAP box through we60 transaction. But its not visible while importing in Integration Repository (SAP XI).
Do i need to do any prior configuration for this...?
Thanks in Advance
Regards
Venkatesh

Just Check the Following
1. In in SCWV in the IR, Tick imoprt of IDOC and RFC allowed
2. Set in the System Information there of your SAP backend System.
3. Then Click on import and, key in the user details.
4. Check whether the user has authorizations for import ( For RFC S_RFC authorization ) is required.
Doing this an Import should be possible.
Reward points if useful
Regards,
Abhishek

Public method not visible

I'm new to Java and am having trouble with a "method not visible" error when trying to use a package by another person (which works in its own context.) As far as I can tell all the relevant classes and methods should be public and accessible.
Here is the basic form of the code I'm trying to make use of:
package org.p2c2e.zag;
public final class Zag {
     public void start() {
}And here is my stripped down code. The z.start() line produces the error message "The method start() from the type Zag is not visible."
import org.p2c2e.zag.*;
public class BasicTest {
public static boolean simpleOpen(File fi) {
     Zag z = new Zag(fi, iStart);
     z.start();
}The Zag class and the start() method within it are both public. Am I missing a general concept here or is something up with the rest of the code?
Thanks in advance,
--Aaron

Based on what you've posted, the only thing I can think of is that you've got an older version of Zag in which start() was not public. Might be a classpath issue, might just be that you didn't recompile Zag.

Previous archives not visible in import dialogue

Similar Messages

Maybe you are looking for