Previous Install Pending Upgrading 2007 CCR to SP3
I'm upgrading our 2007 CCR to SP3. The CAS/HT servers both upgraded with no issues. The passive CCR node failed with the following error in the setup logs:
Line 277: [10/22/2014 2:34:54 PM] [2] [ERROR] Unable to remove product with code 6574fdc2-40fc-405a-9554-22d1ce15686b. Another installation is already in progress. Complete that installation before proceeding with this install. Error code is 1618.
Line 277: [10/22/2014 2:34:54 PM] [2] [ERROR] Unable to remove product with code 6574fdc2-40fc-405a-9554-22d1ce15686b. Another installation is already in progress. Complete that installation before proceeding with this install. Error code is 1618.
Line 278: [10/22/2014 2:34:54 PM] [2] [ERROR] Another installation is already in progress. Complete that installation before proceeding with this install
Digging through setup logs on the active node I found that SP2 had not fully installed.
Line 21073: [9/20/2012 1:58:20 PM] [2] [ERROR] Clustered mailbox server 'EX2K7-CCR-MBOX' is not in an started (online) state (Failed). The cluster resource 'Mailbox Recovery Storage Group/Faculty Database (EX2K7-CCR-MBOX)' is in state (Failed).
Line 21075: [9/20/2012 1:58:20 PM] [1] The following 1 error(s) occurred during task execution:
Line 21076: [9/20/2012 1:58:20 PM] [1] 0. ErrorRecord: Clustered mailbox server 'EX2K7-CCR-MBOX' is not in an started (online) state (Failed). The cluster resource 'Mailbox Recovery Storage Group/Faculty Database (EX2K7-CCR-MBOX)' is in state (Failed).
Line 21077: [9/20/2012 1:58:20 PM] [1] 0. ErrorRecord: Microsoft.Exchange.Management.Tasks.NewCmsNotOnline: Clustered mailbox server 'EX2K7-CCR-MBOX' is not in an started (online) state (Failed). The cluster resource 'Mailbox Recovery Storage Group/Faculty
Database (EX2K7-CCR-MBOX)' is in state (Failed).
Line 21078: [9/20/2012 1:58:20 PM] [1] [ERROR] Clustered mailbox server 'EX2K7-CCR-MBOX' is not in an started (online) state (Failed). The cluster resource 'Mailbox Recovery Storage Group/Faculty Database (EX2K7-CCR-MBOX)' is in state (Failed).
Line 21079: [9/20/2012 1:58:20 PM] [1] Setup is halting task execution because of one or more errors in a critical task.
Line 21082: [9/20/2012 1:58:20 PM] [0] The Exchange Server Setup operation did not complete. For more information, visit http://support.microsoft.com and enter the Error ID.
I had to use ADSI edit to remove the Recovery Storage Group. But, it has been successfully removed. My intended resolution is to re-install SP2 on the active node (after moving the cluster making it the passive node). My question is will
this remove the ERROR 1618 failure on the first node I attempted to upgrade or will I need to manually remove the registry watermark?
Tony
Open Registry Editor,
expand -> HKLM\System\CurrentControlSet\Control\SessionManager
Highlight session manager and locate a key PendingFileRenameOperations.
Check if you have text in that key. if you do, take a backup of that registry and remove that PendingFileRenameOperations and resume Exchange 2007 setup and it should work.
Please revert by replying the outcome!
Pavan Maganti ~ ( Exchange | 2003/2007/2010/E15(2013)) ~~ Please remember to click “Vote As Helpful" if it really helps and "Mark as Answer” if it answers your question, “Unmark as Answer” if a marked post does not actually answer your
question. ~~ This Information is provided is "AS IS" and confers NO Rights!!
Similar Messages
-
Reboot from a previous install pending
K...
I was having issues with owa in general. Have Exchange 2007 SP1 running on Server 2008. I uninstalled the client access portion and when I go to reinstall, i continually get "Error. A reboot from a previous installation is pending. Please restart the system and rerun setup. I check in the registry to see if there was something in "FileRenameOperations" and nothing. Rebooted just for the hell of it and still getting the same error. I have no idea what is going on. I am currently using this server as the front end and the back end has all the mailboxes on it. Reinstalling IIS7 is not an option considering it is running SCCM 2007 which the boss would go ape if we lost it just because of this error. Anyone out there have any suggestions?Hi There,
(for those with similar issues)
There seems to be another orphan value you could check. See:
http://technet.microsoft.com/en-us/library/cc164360(v=EXCHG.80).aspx
regards
D... -
Upgrading from Exchange 2007 SP2 to SP3 stops and fails with Performance Counter
We are upgrading from Exchange 2007 SP2 to SP3.
Exchange Server is on Windows 2008 Enterprise 64 bit OS -SP2
DC is on windows 2008 Enterprise 32 bit OS - SP2
When we run Exchange SP3 setup.exe GUI, it runs through the pre-requisites completely and then starts to configure the Hub Transport services but @ exactly 55% it throws an error window "Exchange Server Setup encountered an error"
On repeating this process i noticed it throws the same error at 55% while "Performance COunter Configuring". Please find below the entries of exchangesetup.log
[2/1/2015 1:09:30 PM] [0] **********************************************
[2/1/2015 1:09:30 PM] [0] Starting Microsoft Exchange 2007 Setup
[2/1/2015 1:09:30 PM] [0] **********************************************
[2/1/2015 1:09:30 PM] [0] Operating System version: Microsoft Windows NT 6.0.6002 Service Pack 2.
[2/1/2015 1:09:30 PM] [0] Setup version: 8.3.83.6.
[2/1/2015 1:09:30 PM] [0] Logged on user: chakfig\Administrator.
[2/1/2015 1:09:30 PM] [0] Command Line Parameter Name='mode', Value='Upgrade'.
[2/1/2015 1:09:30 PM] [0] Command Line Parameter Name='sourcedir', Value='J:\EXSP01\SP3'.
[2/1/2015 1:09:30 PM] [0] Command Line Parameter Name='fromsetup', Value=''.
[2/1/2015 1:09:30 PM] [0] ExSetupUI was started with the following command: '-mode:upgrade -sourcedir:J:\EXSP01\SP3 /FromSetup'.
[2/1/2015 1:09:30 PM] [0] Setup is choosing the domain controller to use
[2/1/2015 1:09:31 PM] [0] Setup is choosing a local domain controller...
[2/1/2015 1:09:35 PM] [0] Setup has chosen the local domain controller PGCDC.chakfig.local for initial queries
[2/1/2015 1:09:35 PM] [0] PrepareAD has been run, and has replicated to this domain controller; so setup will use PGCDC.chakfig.local
[2/1/2015 1:09:35 PM] [0] Setup is choosing a global catalog...
[2/1/2015 1:09:35 PM] [0] Setup has chosen the global catalog server PGCDC.chakfig.local.
[2/1/2015 1:09:35 PM] [0] Setup will use the domain controller 'PGCDC.chakfig.local'.
[2/1/2015 1:09:35 PM] [0] Setup will use the global catalog 'PGCDC.chakfig.local'.
[2/1/2015 1:09:35 PM] [0] Exchange configuration container for the organization is 'CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=chakfig,DC=local'.
[2/1/2015 1:09:35 PM] [0] Exchange organization container for the organization is 'CN=chakfig,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=chakfig,DC=local'.
[2/1/2015 1:09:35 PM] [0] Setup will search for an Exchange Server object for the local machine with name 'PGCVMEXG'.
[2/1/2015 1:09:35 PM] [0] Exchange Server object found : 'CN=PGCVMEXG,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=chakfig,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=chakfig,DC=local'.
[2/1/2015 1:09:35 PM] [0] The following roles are unpacked: BridgeheadRole ClientAccessRole MailboxRole AdminToolsRole
[2/1/2015 1:09:35 PM] [0] The following roles are installed: BridgeheadRole ClientAccessRole MailboxRole AdminToolsRole
[2/1/2015 1:09:35 PM] [0] The local server has some Exchange files installed.
[2/1/2015 1:09:35 PM] [0] Setup will use the path 'J:\EXSP01\SP3' for installing Exchange.
[2/1/2015 1:09:35 PM] [0] Setup will discover the installed roles from server object 'CN=PGCVMEXG,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=chakfig,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=chakfig,DC=local'.
[2/1/2015 1:09:35 PM] [0] 'BridgeheadRole' is installed on the server object.
[2/1/2015 1:09:35 PM] [0] 'ClientAccessRole' is installed on the server object.
[2/1/2015 1:09:35 PM] [0] 'MailboxRole' is installed on the server object.
[2/1/2015 1:09:35 PM] [0] The server is cluster type: 'None'.
[2/1/2015 1:09:35 PM] [0] The requested cluster type: 'None'.
[2/1/2015 1:09:35 PM] [0] The installation mode is set to: 'BuildToBuildUpgrade'.
[2/1/2015 1:09:35 PM] [0] An Exchange organization with name 'chakfig' was found in this forest.
[2/1/2015 1:09:35 PM] [0] Active Directory Initialization status : 'True'.
[2/1/2015 1:09:35 PM] [0] Schema Update Required Status : 'False'.
[2/1/2015 1:09:35 PM] [0] Organization Configuration Update Required Status : 'False'.
[2/1/2015 1:09:35 PM] [0] Domain Configuration Update Required Status : 'False'.
[2/1/2015 1:09:35 PM] [0] The locally installed version is 8.3.83.6.
[2/1/2015 1:09:35 PM] [0] Exchange Installation Directory : 'C:\Program Files\Microsoft\Exchange Server'.
[2/1/2015 1:09:35 PM] [0] The backup copy of the install path is 'C:\Program Files\Microsoft\Exchange Server'.
[2/1/2015 1:09:35 PM] [0] The backup copy of the previously installed version is '8.2.176.2'.
[2/1/2015 1:09:36 PM] [0] Setup is determining what organization-level operations to perform.
[2/1/2015 1:09:36 PM] [0] Because the value was specified, setup is setting the argument OrganizationName to the value chakfig.
[2/1/2015 1:09:36 PM] [0] The installed .msi file is current for this version of setup.
[2/1/2015 1:09:36 PM] [0] RootDataHandler has 1 DataHandlers
[2/1/2015 1:12:38 PM] [0] End of Setup
[2/1/2015 1:12:38 PM] [0] **********************************************
[2/1/2015 2:17:36 PM] [0] **********************************************
[2/1/2015 2:17:36 PM] [0] Starting Microsoft Exchange 2007 Setup
[2/1/2015 2:17:36 PM] [0] **********************************************
[2/1/2015 2:17:36 PM] [0] Operating System version: Microsoft Windows NT 6.0.6002 Service Pack 2.
[2/1/2015 2:17:36 PM] [0] Setup version: 8.3.83.6.
[2/1/2015 2:17:36 PM] [0] Logged on user: chakfig\Administrator.
[2/1/2015 2:17:37 PM] [0] Command Line Parameter Name='mode', Value='Upgrade'.
[2/1/2015 2:17:37 PM] [0] Command Line Parameter Name='sourcedir', Value='J:\EXSP01\SP3'.
[2/1/2015 2:17:37 PM] [0] Command Line Parameter Name='fromsetup', Value=''.
[2/1/2015 2:17:37 PM] [0] ExSetupUI was started with the following command: '-mode:upgrade -sourcedir:J:\EXSP01\SP3 /FromSetup'.
[2/1/2015 2:17:41 PM] [0] Setup is choosing the domain controller to use
[2/1/2015 2:17:41 PM] [0] Setup is choosing a local domain controller...
[2/1/2015 2:17:43 PM] [0] Setup has chosen the local domain controller PGCDC.chakfig.local for initial queries
[2/1/2015 2:17:43 PM] [0] PrepareAD has been run, and has replicated to this domain controller; so setup will use PGCDC.chakfig.local
[2/1/2015 2:17:43 PM] [0] Setup is choosing a global catalog...
[2/1/2015 2:17:43 PM] [0] Setup has chosen the global catalog server PGCDC.chakfig.local.
[2/1/2015 2:17:43 PM] [0] Setup will use the domain controller 'PGCDC.chakfig.local'.
[2/1/2015 2:17:43 PM] [0] Setup will use the global catalog 'PGCDC.chakfig.local'.
[2/1/2015 2:17:43 PM] [0] Exchange configuration container for the organization is 'CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=chakfig,DC=local'.
[2/1/2015 2:17:43 PM] [0] Exchange organization container for the organization is 'CN=chakfig,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=chakfig,DC=local'.
[2/1/2015 2:17:43 PM] [0] Setup will search for an Exchange Server object for the local machine with name 'PGCVMEXG'.
[2/1/2015 2:17:43 PM] [0] Exchange Server object found : 'CN=PGCVMEXG,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=chakfig,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=chakfig,DC=local'.
[2/1/2015 2:17:43 PM] [0] The following roles are unpacked: BridgeheadRole ClientAccessRole MailboxRole AdminToolsRole
[2/1/2015 2:17:43 PM] [0] The following roles are installed: BridgeheadRole ClientAccessRole MailboxRole AdminToolsRole
[2/1/2015 2:17:43 PM] [0] The local server has some Exchange files installed.
[2/1/2015 2:17:43 PM] [0] Setup will use the path 'J:\EXSP01\SP3' for installing Exchange.
[2/1/2015 2:17:43 PM] [0] Setup will discover the installed roles from server object 'CN=PGCVMEXG,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=chakfig,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=chakfig,DC=local'.
[2/1/2015 2:17:43 PM] [0] 'BridgeheadRole' is installed on the server object.
[2/1/2015 2:17:43 PM] [0] 'ClientAccessRole' is installed on the server object.
[2/1/2015 2:17:43 PM] [0] 'MailboxRole' is installed on the server object.
[2/1/2015 2:17:43 PM] [0] The server is cluster type: 'None'.
[2/1/2015 2:17:43 PM] [0] The requested cluster type: 'None'.
[2/1/2015 2:17:43 PM] [0] The installation mode is set to: 'BuildToBuildUpgrade'.
[2/1/2015 2:17:43 PM] [0] An Exchange organization with name 'chakfig' was found in this forest.
[2/1/2015 2:17:43 PM] [0] Active Directory Initialization status : 'True'.
[2/1/2015 2:17:43 PM] [0] Schema Update Required Status : 'False'.
[2/1/2015 2:17:43 PM] [0] Organization Configuration Update Required Status : 'False'.
[2/1/2015 2:17:43 PM] [0] Domain Configuration Update Required Status : 'False'.
[2/1/2015 2:17:43 PM] [0] The locally installed version is 8.3.83.6.
[2/1/2015 2:17:43 PM] [0] Exchange Installation Directory : 'C:\Program Files\Microsoft\Exchange Server'.
[2/1/2015 2:17:43 PM] [0] The backup copy of the install path is 'C:\Program Files\Microsoft\Exchange Server'.
[2/1/2015 2:17:43 PM] [0] The backup copy of the previously installed version is '8.2.176.2'.
[2/1/2015 2:17:43 PM] [0] Setup is determining what organization-level operations to perform.
[2/1/2015 2:17:43 PM] [0] Because the value was specified, setup is setting the argument OrganizationName to the value chakfig.
[2/1/2015 2:17:43 PM] [0] The installed .msi file is current for this version of setup.
[2/1/2015 2:17:43 PM] [0] RootDataHandler has 1 DataHandlers
[2/1/2015 2:17:47 PM] [0] Validating options for the 4 requested roles
[2/1/2015 2:17:47 PM] [0] UpgradeModeDataHandler has 5 handlers and 5 work units
[2/1/2015 2:17:52 PM] [0] Validating options for the 4 requested roles
[2/1/2015 2:17:52 PM] [0] UpgradeModeDataHandler has 5 handlers and 5 work units
[2/1/2015 2:17:53 PM] [0] **************
[2/1/2015 2:17:53 PM] [0] Setup will run the task 'test-setuphealth'
[2/1/2015 2:17:53 PM] [1] Setup launched task 'test-setuphealth -DomainController 'PGCDC.chakfig.local' -DownloadConfigurationUpdates $true -ExchangeVersion '8.3.83.6' -Roles 'Bridgehead' -ScanType 'PrecheckUpgrade' -SetupRoles 'Bridgehead','ClientAccess','Mailbox','AdminTools'
-TargetDir 'C:\Program Files\Microsoft\Exchange Server''
[2/1/2015 2:17:53 PM] [1] Beginning processing.
[2/1/2015 2:18:19 PM] [1] Beginning processing.
[2/1/2015 2:18:19 PM] [1] Administrator Active Directory session settings are: View Entire Forest: 'True', Configuration Domain Controller: 'PGCDC.chakfig.local', Preferred Global Catalog: 'PGCDC.chakfig.local', Preferred Domain Controllers: '{ PGCDC.chakfig.local
[2/1/2015 2:18:19 PM] [1] Searching objects "PGCVMEXG" of type "Server" under the root "$null".
[2/1/2015 2:18:19 PM] [1] Previous operation run on domain controller 'PGCDC.chakfig.local'.
[2/1/2015 2:18:19 PM] [1] Previous operation run on domain controller 'PGCDC.chakfig.local'.
[2/1/2015 2:18:19 PM] [1] Preparing to output objects. Maximum result set size "unlimited".
[2/1/2015 2:18:20 PM] [1] Ending processing.
[2/1/2015 2:18:20 PM] [1] Beginning processing.
[2/1/2015 2:18:20 PM] [1] Administrator Active Directory session settings are: View Entire Forest: 'True', Configuration Domain Controller: 'PGCDC.chakfig.local', Preferred Global Catalog: 'PGCDC.chakfig.local', Preferred Domain Controllers: '{ PGCDC.chakfig.local
[2/1/2015 2:18:20 PM] [1] Searching objects of type "SmtpSendConnectorConfig" with filter "$null", scope "SubTree" under the root "Administrative Groups".
[2/1/2015 2:18:20 PM] [1] Previous operation run on domain controller 'PGCDC.chakfig.local'.
[2/1/2015 2:18:20 PM] [1] Preparing to output objects. Maximum result set size "unlimited".
[2/1/2015 2:18:20 PM] [1] Ending processing.
[2/1/2015 2:18:20 PM] [1] Ending processing.
[2/1/2015 2:18:20 PM] [0] **************
[2/1/2015 2:18:20 PM] [0] Setup will run the task 'test-setuphealth'
[2/1/2015 2:18:20 PM] [1] Setup launched task 'test-setuphealth -DomainController 'PGCDC.chakfig.local' -DownloadConfigurationUpdates $false -ExchangeVersion '8.3.83.6' -Roles 'ClientAccess' -ScanType 'PrecheckUpgrade' -SetupRoles 'Bridgehead','ClientAccess','Mailbox','AdminTools'
-TargetDir 'C:\Program Files\Microsoft\Exchange Server' -IISInstalled $true'
[2/1/2015 2:18:20 PM] [1] Beginning processing.
[2/1/2015 2:18:26 PM] [1] Beginning processing.
[2/1/2015 2:18:26 PM] [1] Administrator Active Directory session settings are: View Entire Forest: 'True', Configuration Domain Controller: 'PGCDC.chakfig.local', Preferred Global Catalog: 'PGCDC.chakfig.local', Preferred Domain Controllers: '{ PGCDC.chakfig.local
[2/1/2015 2:18:55 PM] [1] Searching objects of type "SmtpSendConnectorConfig" with filter "$null", scope "SubTree" under the root "Administrative Groups".
[2/1/2015 2:18:55 PM] [1] Previous operation run on domain controller 'PGCDC.chakfig.local'.
[2/1/2015 2:18:55 PM] [1] Preparing to output objects. Maximum result set size "unlimited".
[2/1/2015 2:18:55 PM] [1] Ending processing.
[2/1/2015 2:18:55 PM] [1] Ending processing.
[2/1/2015 2:18:55 PM] [0] **************
[2/1/2015 2:18:55 PM] [0] Setup will run the task 'test-setuphealth'
[2/1/2015 2:18:55 PM] [1] Setup launched task 'test-setuphealth -DomainController 'PGCDC.chakfig.local' -DownloadConfigurationUpdates $false -ExchangeVersion '8.3.83.6' -Roles 'ClientAccess' -ScanType 'PrecheckUpgrade' -SetupRoles 'Bridgehead','ClientAccess','Mailbox','AdminTools'
-TargetDir 'C:\Program Files\Microsoft\Exchange Server' -IISInstalled $true'
[2/1/2015 2:18:55 PM] [1] Beginning processing.
[2/1/2015 2:19:01 PM] [1] Beginning processing.
[2/1/2015 2:19:01 PM] [1] Administrator Active Directory session settings are: View Entire Forest: 'True', Configuration Domain Controller: 'PGCDC.chakfig.local', Preferred Global Catalog: 'PGCDC.chakfig.local', Preferred Domain Controllers: '{ PGCDC.chakfig.local
[2/1/2015 2:19:01 PM] [1] Searching objects "PGCVMEXG" of type "Server" under the root "$null".
[2/1/2015 2:19:01 PM] [1] Previous operation run on domain controller 'PGCDC.chakfig.local'.
[2/1/2015 2:19:01 PM] [1] Previous operation run on domain controller 'PGCDC.chakfig.local'.
[2/1/2015 2:19:01 PM] [1] Preparing to output objects. Maximum result set size "unlimited".
[2/1/2015 2:19:01 PM] [1] Ending processing.
[2/1/2015 2:19:01 PM] [1] Ending processing.
[2/1/2015 2:19:01 PM] [0] **************
[2/1/2015 2:19:01 PM] [0] Setup will run the task 'test-setuphealth'
[2/1/2015 2:19:01 PM] [1] Setup launched task 'test-setuphealth -DomainController 'PGCDC.chakfig.local' -DownloadConfigurationUpdates $false -ExchangeVersion '8.3.83.6' -Roles 'Mailbox' -ScanType 'PrecheckUpgrade' -SetupRoles 'Bridgehead','ClientAccess','Mailbox','AdminTools'
-TargetDir 'C:\Program Files\Microsoft\Exchange Server' -IISInstalled $true'
[2/1/2015 2:19:01 PM] [1] Beginning processing.
[2/1/2015 2:19:04 PM] [1] Beginning processing.
[2/1/2015 2:19:04 PM] [1] Ending processing.
[2/1/2015 2:19:07 PM] [1] Beginning processing.
[2/1/2015 2:19:07 PM] [1] Administrator Active Directory session settings are: View Entire Forest: 'True', Configuration Domain Controller: 'PGCDC.chakfig.local', Preferred Global Catalog: 'PGCDC.chakfig.local', Preferred Domain Controllers: '{ PGCDC.chakfig.local
[2/1/2015 2:19:07 PM] [1] Searching objects "PGCVMEXG" of type "Server" under the root "$null".
[2/1/2015 2:19:07 PM] [1] Previous operation run on domain controller 'PGCDC.chakfig.local'.
[2/1/2015 2:19:07 PM] [1] Previous operation run on domain controller 'PGCDC.chakfig.local'.
[2/1/2015 2:19:07 PM] [1] Preparing to output objects. Maximum result set size "unlimited".
[2/1/2015 2:19:07 PM] [1] Ending processing.
[2/1/2015 2:19:08 PM] [1] Ending processing.
[2/1/2015 2:19:20 PM] [0] Setup is determining what organization-level operations to perform.
[2/1/2015 2:19:20 PM] [0] Because the value was specified, setup is setting the argument OrganizationName to the value chakfig.
[2/1/2015 2:19:20 PM] [0] The installed .msi file is current for this version of setup.
[2/1/2015 2:19:20 PM] [0] RootDataHandler has 1 DataHandlers
[2/1/2015 2:19:20 PM] [0] **************
[2/1/2015 2:19:20 PM] [0] Setup will run the task 'Install-BridgeheadRole'
[2/1/2015 2:19:20 PM] [1] Setup launched task 'Install-BridgeheadRole -DomainController 'PGCDC.chakfig.local' -UpdatesDir 'J:\EXSP01\SP3\Updates''
[2/1/2015 2:19:20 PM] [1] Beginning processing.
[2/1/2015 2:19:20 PM] [1] Attempting Install for BridgeheadRole.
[2/1/2015 2:19:20 PM] [1] The following roles are current:
[2/1/2015 2:19:26 PM] [1] Reading components for role 'BridgeheadRole' from 'res://BridgeheadRoleDefinition.xml'
[2/1/2015 2:19:26 PM] [1] Found 22 components
[2/1/2015 2:19:26 PM] [1] Loaded component 'All Roles Common First - Run Once' with 10 task info blocks from 'res://AllRolesCommonFirst_RunOnce.xml'
[2/1/2015 2:19:26 PM] [1] Loaded component 'All Roles Common First' with 8 task info blocks from 'res://AllRolesCommonFirst.xml'
[2/1/2015 2:19:27 PM] [1] Loaded component 'All Roles Precompile Management Binaries' with 30 task info blocks from 'res://AllRolesPrecompileManagementBinaries.xml'
[2/1/2015 2:19:27 PM] [1] Loaded component 'Bridgehead Permissions Configuration' with 1 task info blocks from 'res://BridgeheadLocalPermissionsComponent.xml'
[2/1/2015 2:19:27 PM] [1] Loaded component 'Common Perf Counters ' with 2 task info blocks from 'res://CommonPerfCountersComponent.xml'
[2/1/2015 2:19:27 PM] [1] Loaded component 'Provision Server' with 9 task info blocks from 'res://ProvisionServerComponent.xml'
[2/1/2015 2:19:28 PM] [1] Loaded component 'All Active-Directory Roles Common' with 14 task info blocks from 'res://AllADRolesCommon.xml'
[2/1/2015 2:19:28 PM] [1] Loaded component 'Exchange 2003 Pseudo-MTA Configuration' with 1 task info blocks from 'res://LegacyMTAComponent.xml'
[2/1/2015 2:19:28 PM] [1] Loaded component 'Exchange 2003 SMTP VSI Configuration' with 1 task info blocks from 'res://LegacySMTPComponent.xml'
[2/1/2015 2:19:29 PM] [1] Loaded component 'Transport Perf Counters' with 21 task info blocks from 'res://TransportPerfCountersComponent.xml'
[2/1/2015 2:19:29 PM] [1] Loaded component 'Enable RPC-EPMAP firewall exception' with 1 task info blocks from 'res://RpcEpmapFirewallException.xml'
[2/1/2015 2:19:29 PM] [1] Loaded component 'Bridgehead Role Setter' with 1 task info blocks from 'res://BridgeheadRoleSetterComponent.xml'
[2/1/2015 2:19:29 PM] [1] Loaded component 'Transport Common Configuration' with 22 task info blocks from 'res://TransportCommonComponent.xml'
[2/1/2015 2:19:30 PM] [1] Loaded component 'Bridgehead Perf Counters' with 8 task info blocks from 'res://BridgeheadPerfCountersComponent.xml'
[2/1/2015 2:19:30 PM] [1] Loaded component 'Bridgehead Configuration' with 18 task info blocks from 'res://BridgeheadComponent.xml'
[2/1/2015 2:19:30 PM] [1] Loaded component 'Transport Log Search Service' with 1 task info blocks from 'res://TransportLogSearchServiceComponent.xml'
[2/1/2015 2:19:31 PM] [1] Loaded component 'Data Storage Configuration' with 1 task info blocks from 'res://DataStorageComponent.xml'
[2/1/2015 2:19:31 PM] [1] Loaded component 'Monitoring Service Configuration' with 5 task info blocks from 'res://MonitoringComponent.xml'
[2/1/2015 2:19:31 PM] [1] Loaded component 'Active Directory Topology Service Configuration' with 2 task info blocks from 'res://AllADRolesCommonServiceControl.xml'
[2/1/2015 2:19:31 PM] [1] Loaded component 'Bridgehead Service Configuration' with 3 task info blocks from 'res://BridgeheadServiceControl.xml'
[2/1/2015 2:19:32 PM] [1] Loaded component 'Transport Common Service Control' with 1 task info blocks from 'res://TransportCommonServiceControl.xml'
[2/1/2015 2:19:32 PM] [1] Loaded component 'All Roles Common Last' with 4 task info blocks from 'res://AllRolesCommonLast.xml'
[2/1/2015 2:19:32 PM] [1] The following roles are installed: BridgeheadRole ClientAccessRole MailboxRole AdminToolsRole
[2/1/2015 2:19:32 PM] [1] Writing informational script to 'C:\ExchangeSetupLogs\Install-BridgeheadRole-20150201-1419320497.ps1'
[2/1/2015 2:19:32 PM] [1] Executing '$RoleIsClusterNode = $False', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleIsClusterNode = $False'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleRoles = "BridgeheadRole,ClientAccessRole,MailboxRole,AdminToolsRole"', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleRoles = "BridgeheadRole,ClientAccessRole,MailboxRole,AdminToolsRole"'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleIsAdminToolsRoleInstalled = $True', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleIsAdminToolsRoleInstalled = $True'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleNetBIOSName = "pgcvmexg"', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleNetBIOSName = "pgcvmexg"'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleInvocationID = "20150201-1419320497"', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleInvocationID = "20150201-1419320497"'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleInstallPath = "C:\Program Files\Microsoft\Exchange Server\"', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleInstallPath = "C:\Program Files\Microsoft\Exchange Server\"'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleStartTransportService = $True', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleStartTransportService = $True'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleLoggedOnUser = "chakfig\Administrator"', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleLoggedOnUser = "chakfig\Administrator"'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleInstallationMode = "BuildToBuildUpgrade"', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleInstallationMode = "BuildToBuildUpgrade"'.
[2/1/2015 2:19:32 PM] [1] Executing '$RolePreviousVersion = "8.2.176.2"', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RolePreviousVersion = "8.2.176.2"'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleIsMailboxRoleInstalled = $True', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleIsMailboxRoleInstalled = $True'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleBinPath = "C:\Program Files\Microsoft\Exchange Server\Bin"', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleBinPath = "C:\Program Files\Microsoft\Exchange Server\Bin"'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleSetupLoggingPath = "C:\ExchangeSetupLogs"', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleSetupLoggingPath = "C:\ExchangeSetupLogs"'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleFqdnOrName = "pgcvmexg"', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleFqdnOrName = "pgcvmexg"'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleTargetVersion = "8.3.83.6"', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleTargetVersion = "8.3.83.6"'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleUpdatesDir = "J:\EXSP01\SP3\Updates"', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleUpdatesDir = "J:\EXSP01\SP3\Updates"'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleIsClientAccessRoleInstalled = $True', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleIsClientAccessRoleInstalled = $True'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleRoleName = "BridgeheadRole"', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleRoleName = "BridgeheadRole"'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleDomainController = "PGCDC.chakfig.local"', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleDomainController = "PGCDC.chakfig.local"'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleProductPlatform = "amd64"', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleProductPlatform = "amd64"'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleIsBridgeheadRoleInstalled = $True', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleIsBridgeheadRoleInstalled = $True'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleLoggingPath = "C:\Program Files\Microsoft\Exchange Server\Logging"', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleLoggingPath = "C:\Program Files\Microsoft\Exchange Server\Logging"'.
[2/1/2015 2:19:32 PM] [1] Found 136 tasks to execute
[2/1/2015 2:19:32 PM] [1] Processing component 'All Roles Common First - Run Once' (Configuring the server.).
[2/1/2015 2:19:32 PM] [1] Executing 'if ($RoleProductPlatform -eq "amd64") { $watsonMSI = 'dw20sharedamd64.msi'; $watsonMSILogFileName = 'Installdw20sharedamd64.msilog'; } else { $watsonMSI = 'dw20shared.msi'; $watsonMSILogFileName = 'Installdw20shared.msilog';
} install-MsiPackage -PackagePath ($RoleInstallPath + "bin\$watsonMSI") -LogFile ($RoleSetupLoggingPath + "\$watsonMSILogFileName") -UpdatesDir $RoleUpdatesDir -PropertyValues ("APPGUID=`"{24B2C164-DE66-44fe-B468-A46D9D5E6B31}`"
LOGVERBOSE=1");', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); if ($RoleProductPlatform -eq "amd64") { $watsonMSI = 'dw20sharedamd64.msi'; $watsonMSILogFileName = 'Installdw20sharedamd64.msilog'; } else { $watsonMSI = 'dw20shared.msi'; $watsonMSILogFileName
= 'Installdw20shared.msilog'; } install-MsiPackage -PackagePath ($RoleInstallPath + "bin\$watsonMSI") -LogFile ($RoleSetupLoggingPath + "\$watsonMSILogFileName") -UpdatesDir $RoleUpdatesDir -PropertyValues ("APPGUID=`"{24B2C164-DE66-44fe-B468-A46D9D5E6B31}`"
LOGVERBOSE=1");'.
[2/1/2015 2:19:32 PM] [2] Beginning processing.
[2/1/2015 2:19:33 PM] [2] ProductCode is '95120000-00b9-0409-1000-0000000ff1ce'.
[2/1/2015 2:19:33 PM] [2] PackagePath was set to 'C:\Program Files\Microsoft\Exchange Server\bin\dw20sharedamd64.msi'; normalizing to 'C:\Program Files\Microsoft\Exchange Server\bin\dw20sharedamd64.msi'.
[2/1/2015 2:19:33 PM] [2] ProductCode is '95120000-00b9-0409-1000-0000000ff1ce'.
[2/1/2015 2:19:33 PM] [2] Installing MSI package 'C:\Program Files\Microsoft\Exchange Server\bin\dw20sharedamd64.msi'.
[2/1/2015 2:19:34 PM] [2] Ending processing.
[2/1/2015 2:19:34 PM] [1] Executing 'Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";', handleError = False
[2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";'.
[2/1/2015 2:19:34 PM] [2] Beginning processing.
[2/1/2015 2:19:34 PM] [2] Ending processing.
[2/1/2015 2:19:34 PM] [1] Executing 'Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007.xml" -XmlNodeNameToRemove "_locDefinition";', handleError = False
[2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007.xml" -XmlNodeNameToRemove "_locDefinition";'.
[2/1/2015 2:19:34 PM] [2] Beginning processing.
[2/1/2015 2:19:34 PM] [2] ExchangeInstallPath = C:\Program Files\Microsoft\Exchange Server\, Relative Path = Scripts\, Xml Full File Path = C:\Program Files\Microsoft\Exchange Server\Scripts\Exchange2007.xml, Xml Node Name = _locDefinition
[2/1/2015 2:19:34 PM] [2] Ending processing.
[2/1/2015 2:19:34 PM] [1] Executing 'Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007Edge.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";', handleError = False
[2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007Edge.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";'.
[2/1/2015 2:19:34 PM] [2] Beginning processing.
[2/1/2015 2:19:34 PM] [2] Ending processing.
[2/1/2015 2:19:34 PM] [1] Executing 'Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007Edge.xml" -XmlNodeNameToRemove "_locDefinition";', handleError = False
[2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007Edge.xml" -XmlNodeNameToRemove "_locDefinition";'.
[2/1/2015 2:19:34 PM] [2] Beginning processing.
[2/1/2015 2:19:34 PM] [2] ExchangeInstallPath = C:\Program Files\Microsoft\Exchange Server\, Relative Path = Scripts\, Xml Full File Path = C:\Program Files\Microsoft\Exchange Server\Scripts\Exchange2007Edge.xml, Xml Node Name = _locDefinition
[2/1/2015 2:19:34 PM] [2] Ending processing.
[2/1/2015 2:19:34 PM] [1] Executing 'Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007_WinSrv2008.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";', handleError = False
[2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007_WinSrv2008.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";'.
[2/1/2015 2:19:34 PM] [2] Beginning processing.
[2/1/2015 2:19:34 PM] [2] Ending processing.
[2/1/2015 2:19:34 PM] [1] Executing 'Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007_WinSrv2008.xml" -XmlNodeNameToRemove "_locDefinition";', handleError = False
[2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007_WinSrv2008.xml" -XmlNodeNameToRemove "_locDefinition";'.
[2/1/2015 2:19:34 PM] [2] Beginning processing.
[2/1/2015 2:19:34 PM] [2] ExchangeInstallPath = C:\Program Files\Microsoft\Exchange Server\, Relative Path = Scripts\, Xml Full File Path = C:\Program Files\Microsoft\Exchange Server\Scripts\Exchange2007_WinSrv2008.xml, Xml Node Name = _locDefinition
[2/1/2015 2:19:34 PM] [2] Ending processing.
[2/1/2015 2:19:34 PM] [1] Executing 'Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007Edge_WinSrv2008.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";', handleError
= False
[2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007Edge_WinSrv2008.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";'.
[2/1/2015 2:19:34 PM] [2] Beginning processing.
[2/1/2015 2:19:34 PM] [2] Ending processing.
[2/1/2015 2:19:34 PM] [1] Executing 'Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007Edge_WinSrv2008.xml" -XmlNodeNameToRemove "_locDefinition";', handleError = False
[2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007Edge_WinSrv2008.xml" -XmlNodeNameToRemove "_locDefinition";'.
[2/1/2015 2:19:34 PM] [2] Beginning processing.
[2/1/2015 2:19:34 PM] [2] ExchangeInstallPath = C:\Program Files\Microsoft\Exchange Server\, Relative Path = Scripts\, Xml Full File Path = C:\Program Files\Microsoft\Exchange Server\Scripts\Exchange2007Edge_WinSrv2008.xml, Xml Node Name = _locDefinition
[2/1/2015 2:19:34 PM] [2] Ending processing.
[2/1/2015 2:19:34 PM] [1] Executing 'Set-WERRegistryMarkers;', handleError = False
[2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Set-WERRegistryMarkers;'.
[2/1/2015 2:19:34 PM] [2] Beginning processing.
[2/1/2015 2:19:34 PM] [2] Ending processing.
[2/1/2015 2:19:35 PM] [1] Processing component 'All Roles Common First' (Creating the Exchange server configuration in the Active Directory).
[2/1/2015 2:19:35 PM] [1] Executing '$RoleNames = $RoleRoles.Replace('Role','').Split(','); .\ServiceControl.ps1 EnableServices $RoleNames', handleError = False
[2/1/2015 2:19:35 PM] [2] Launching sub-task '$error.Clear(); $RoleNames = $RoleRoles.Replace('Role','').Split(','); .\ServiceControl.ps1 EnableServices $RoleNames'.
[2/1/2015 2:19:35 PM] [1] Executing 'Set-LocalPermissions', handleError = False
[2/1/2015 2:19:35 PM] [2] Launching sub-task '$error.Clear(); Set-LocalPermissions'.
[2/1/2015 2:19:35 PM] [2] Beginning processing.
[2/1/2015 2:19:49 PM] [2] Ending processing.
[2/1/2015 2:19:49 PM] [1] Executing 'get-service | where { $_.Name -ieq "HealthService" } | stop-service -Force:$true', handleError = False
[2/1/2015 2:19:49 PM] [2] Launching sub-task '$error.Clear(); get-service | where { $_.Name -ieq "HealthService" } | stop-service -Force:$true'.
[2/1/2015 2:19:49 PM] [1] Executing 'get-service | where { $_.Name -ieq "MOM" } | stop-service -Force:$true', handleError = False
[2/1/2015 2:19:49 PM] [2] Launching sub-task '$error.Clear(); get-service | where { $_.Name -ieq "MOM" } | stop-service -Force:$true'.
[2/1/2015 2:19:49 PM] [1] Executing 'get-service | where { $_.Name -ieq "OnePoint" } | stop-service -Force:$true', handleError = False
[2/1/2015 2:19:49 PM] [2] Launching sub-task '$error.Clear(); get-service | where { $_.Name -ieq "OnePoint" } | stop-service -Force:$true'.
[2/1/2015 2:19:49 PM] [1] Executing '$mofFilePath = ($RoleInstallPath + "bin\Exchange.MOF"); $mflFilePath = ($RoleInstallPath + "bin\Exchange.MFL"); compile-moffile -MofFilePath:$mofFilePath; compile-moffile -MofFilePath:$mflFilePath;',
handleError = True
[2/1/2015 2:19:49 PM] [2] Launching sub-task '$error.Clear(); $mofFilePath = ($RoleInstallPath + "bin\Exchange.MOF"); $mflFilePath = ($RoleInstallPath + "bin\Exchange.MFL"); compile-moffile -MofFilePath:$mofFilePath; compile-moffile
-MofFilePath:$mflFilePath;'.
[2/1/2015 2:19:49 PM] [2] Beginning processing.
[2/1/2015 2:19:49 PM] [2] Exchange tracing provider was installed successfully.
[2/1/2015 2:19:49 PM] [2] Ending processing.
[2/1/2015 2:19:49 PM] [2] Beginning processing.
[2/1/2015 2:19:49 PM] [2] Exchange tracing provider was installed successfully.
[2/1/2015 2:19:49 PM] [2] Ending processing.
[2/1/2015 2:19:49 PM] [1] Processing component 'All Roles Precompile Management Binaries' (Pre-compiling management binaries.).
[2/1/2015 2:19:49 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\microsoft.Exchange.Rpc.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
[2/1/2015 2:19:49 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\microsoft.Exchange.Rpc.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
[2/1/2015 2:19:49 PM] [2] Beginning processing.
[2/1/2015 2:19:49 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Rpc.dll" /verbose
[2/1/2015 2:19:50 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
Copyright (c) Microsoft Corporation. All rights reserved.
Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Rpc.dll
All compilation targets are up to date.
[2/1/2015 2:19:50 PM] [2] Process standard error:
[2/1/2015 2:19:50 PM] [2] Ending processing.
[2/1/2015 2:19:50 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\microsoft.Exchange.Common.IL.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
[2/1/2015 2:19:50 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\microsoft.Exchange.Common.IL.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
[2/1/2015 2:19:50 PM] [2] Beginning processing.
[2/1/2015 2:19:50 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Common.IL.dll" /verbose
[2/1/2015 2:19:50 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
Copyright (c) Microsoft Corporation. All rights reserved.
Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Common.IL.dll
All compilation targets are up to date.
[2/1/2015 2:19:50 PM] [2] Process standard error:
[2/1/2015 2:19:50 PM] [2] Ending processing.
[2/1/2015 2:19:50 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Diagnostics.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
[2/1/2015 2:19:50 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Diagnostics.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
[2/1/2015 2:19:50 PM] [2] Beginning processing.
[2/1/2015 2:19:50 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Diagnostics.dll" /verbose
[2/1/2015 2:19:51 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
Copyright (c) Microsoft Corporation. All rights reserved.
Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Diagnostics.dll
All compilation targets are up to date.
[2/1/2015 2:19:51 PM] [2] Process standard error:
[2/1/2015 2:19:51 PM] [2] Ending processing
[2/1/2015 2:20:07 PM] [2] Process standard error:
[2/1/2015 2:20:07 PM] [2] Ending processing.
[2/1/2015 2:20:07 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.PowerShell.configuration.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
[2/1/2015 2:20:07 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.PowerShell.configuration.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
[2/1/2015 2:20:07 PM] [2] Beginning processing.
[2/1/2015 2:20:07 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.PowerShell.configuration.dll" /verbose
[2/1/2015 2:20:10 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
Copyright (c) Microsoft Corporation. All rights reserved.
Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.PowerShell.configuration.dll
All compilation targets are up to date.
[2/1/2015 2:20:10 PM] [2] Process standard error:
[2/1/2015 2:20:10 PM] [2] Ending processing.
[2/1/2015 2:20:10 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Management.SnapIn.Esm.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
[2/1/2015 2:20:10 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Management.SnapIn.Esm.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
[2/1/2015 2:20:10 PM] [2] Beginning processing.
[2/1/2015 2:20:10 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Management.SnapIn.Esm.dll" /verbose
[2/1/2015 2:20:12 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
Copyright (c) Microsoft Corporation. All rights reserved.
Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Management.SnapIn.Esm.dll
All compilation targets are up to date.
[2/1/2015 2:20:12 PM] [2] Process standard error:
[2/1/2015 2:20:12 PM] [2] Ending processing.
[2/1/2015 2:20:12 PM] [1] Processing component 'Bridgehead Permissions Configuration' (Setting folder and registry permissions).
[2/1/2015 2:20:12 PM] [1] Executing 'Set-LocalPermissions -Feature:"Bridgehead"', handleError = False
[2/1/2015 2:20:12 PM] [2] Launching sub-task '$error.Clear(); Set-LocalPermissions -Feature:"Bridgehead"'.
[2/1/2015 2:20:12 PM] [2] Beginning processing.
[2/1/2015 2:20:12 PM] [2] Ending processing.
[2/1/2015 2:20:12 PM] [1] Processing component 'Common Perf Counters ' (Configuring performance counters).
[2/1/2015 2:20:12 PM] [1] Executing 'new-perfcounters -DefinitionFileName ExchangeTopologyPerformanceCounters.xml', handleError = True
[2/1/2015 2:20:12 PM] [2] Launching sub-task '$error.Clear(); new-perfcounters -DefinitionFileName ExchangeTopologyPerformanceCounters.xml'.
[2/1/2015 2:20:12 PM] [2] Beginning processing.
[2/1/2015 2:20:12 PM] [2] Processing file: C:\Program Files\Microsoft\Exchange Server\Setup\Perf\ExchangeTopologyPerformanceCounters.xml
[2/1/2015 2:20:12 PM] [2] Performance counter name is Latest Exchange Topology Discovery Time in Seconds, type is NumberOfItems32.
[2/1/2015 2:20:12 PM] [2] Performance counter name is Number of Exchange Topology Discoveries, type is NumberOfItems32.
[2/1/2015 2:20:12 PM] [2] Performance counter name is Number of Siteless Servers, type is NumberOfItems32.
Appreciate if someone can help us move forward in this scenario.
We have
1. disabled anti virus and tried.
2. removed watermarks and action entries in the registry
3. tried almost everything mentioned on google but i am not able to move forward.
Please help. we need this as part of our migration to Exchange 2013 for co-existence.
Thank you.
PhilipExchangeSetup.log (part 3)
[2/2/2015 8:06:45 PM] [1] Executing '$RoleSetupLoggingPath = "C:\ExchangeSetupLogs"', handleError = False
[2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleSetupLoggingPath = "C:\ExchangeSetupLogs"'.
[2/2/2015 8:06:45 PM] [1] Executing '$RoleFqdnOrName = "pgcvmexg"', handleError = False
[2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleFqdnOrName = "pgcvmexg"'.
[2/2/2015 8:06:45 PM] [1] Executing '$RoleTargetVersion = "8.3.83.6"', handleError = False
[2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleTargetVersion = "8.3.83.6"'.
[2/2/2015 8:06:45 PM] [1] Executing '$RoleUpdatesDir = "C:\SP3\Updates"', handleError = False
[2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleUpdatesDir = "C:\SP3\Updates"'.
[2/2/2015 8:06:45 PM] [1] Executing '$RoleIsClientAccessRoleInstalled = $True', handleError = False
[2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleIsClientAccessRoleInstalled = $True'.
[2/2/2015 8:06:45 PM] [1] Executing '$RoleRoleName = "BridgeheadRole"', handleError = False
[2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleRoleName = "BridgeheadRole"'.
[2/2/2015 8:06:45 PM] [1] Executing '$RoleDomainController = "PGCDC.platcorp.local"', handleError = False
[2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleDomainController = "PGCDC.platcorp.local"'.
[2/2/2015 8:06:45 PM] [1] Executing '$RoleProductPlatform = "amd64"', handleError = False
[2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleProductPlatform = "amd64"'.
[2/2/2015 8:06:45 PM] [1] Executing '$RoleIsBridgeheadRoleInstalled = $True', handleError = False
[2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleIsBridgeheadRoleInstalled = $True'.
[2/2/2015 8:06:45 PM] [1] Executing '$RoleLoggingPath = "C:\Program Files\Microsoft\Exchange Server\Logging"', handleError = False
[2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleLoggingPath = "C:\Program Files\Microsoft\Exchange Server\Logging"'.
[2/2/2015 8:06:45 PM] [1] Found 136 tasks to execute
[2/2/2015 8:06:45 PM] [1] Processing component 'All Roles Common First - Run Once' (Configuring the server.).
[2/2/2015 8:06:45 PM] [1] Executing 'if ($RoleProductPlatform -eq "amd64") { $watsonMSI = 'dw20sharedamd64.msi'; $watsonMSILogFileName = 'Installdw20sharedamd64.msilog'; } else { $watsonMSI = 'dw20shared.msi'; $watsonMSILogFileName = 'Installdw20shared.msilog';
} install-MsiPackage -PackagePath ($RoleInstallPath + "bin\$watsonMSI") -LogFile ($RoleSetupLoggingPath + "\$watsonMSILogFileName") -UpdatesDir $RoleUpdatesDir -PropertyValues ("APPGUID=`"{24B2C164-DE66-44fe-B468-A46D9D5E6B31}`"
LOGVERBOSE=1");', handleError = False
[2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); if ($RoleProductPlatform -eq "amd64") { $watsonMSI = 'dw20sharedamd64.msi'; $watsonMSILogFileName = 'Installdw20sharedamd64.msilog'; } else { $watsonMSI = 'dw20shared.msi'; $watsonMSILogFileName
= 'Installdw20shared.msilog'; } install-MsiPackage -PackagePath ($RoleInstallPath + "bin\$watsonMSI") -LogFile ($RoleSetupLoggingPath + "\$watsonMSILogFileName") -UpdatesDir $RoleUpdatesDir -PropertyValues ("APPGUID=`"{24B2C164-DE66-44fe-B468-A46D9D5E6B31}`"
LOGVERBOSE=1");'.
[2/2/2015 8:06:45 PM] [2] Beginning processing.
[2/2/2015 8:06:45 PM] [2] ProductCode is '95120000-00b9-0409-1000-0000000ff1ce'.
[2/2/2015 8:06:45 PM] [2] PackagePath was set to 'C:\Program Files\Microsoft\Exchange Server\bin\dw20sharedamd64.msi'; normalizing to 'C:\Program Files\Microsoft\Exchange Server\bin\dw20sharedamd64.msi'.
[2/2/2015 8:06:45 PM] [2] ProductCode is '95120000-00b9-0409-1000-0000000ff1ce'.
[2/2/2015 8:06:45 PM] [2] Installing MSI package 'C:\Program Files\Microsoft\Exchange Server\bin\dw20sharedamd64.msi'.
[2/2/2015 8:06:47 PM] [2] Ending processing.
[2/2/2015 8:06:47 PM] [1] Executing 'Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";', handleError = False
[2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";'.
[2/2/2015 8:06:47 PM] [2] Beginning processing.
[2/2/2015 8:06:47 PM] [2] Ending processing.
[2/2/2015 8:06:47 PM] [1] Executing 'Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007.xml" -XmlNodeNameToRemove "_locDefinition";', handleError = False
[2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007.xml" -XmlNodeNameToRemove "_locDefinition";'.
[2/2/2015 8:06:47 PM] [2] Beginning processing.
[2/2/2015 8:06:47 PM] [2] ExchangeInstallPath = C:\Program Files\Microsoft\Exchange Server\, Relative Path = Scripts\, Xml Full File Path = C:\Program Files\Microsoft\Exchange Server\Scripts\Exchange2007.xml, Xml Node Name = _locDefinition
[2/2/2015 8:06:47 PM] [2] Ending processing.
[2/2/2015 8:06:47 PM] [1] Executing 'Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007Edge.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";', handleError = False
[2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007Edge.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";'.
[2/2/2015 8:06:47 PM] [2] Beginning processing.
[2/2/2015 8:06:47 PM] [2] Ending processing.
[2/2/2015 8:06:47 PM] [1] Executing 'Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007Edge.xml" -XmlNodeNameToRemove "_locDefinition";', handleError = False
[2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007Edge.xml" -XmlNodeNameToRemove "_locDefinition";'.
[2/2/2015 8:06:47 PM] [2] Beginning processing.
[2/2/2015 8:06:47 PM] [2] ExchangeInstallPath = C:\Program Files\Microsoft\Exchange Server\, Relative Path = Scripts\, Xml Full File Path = C:\Program Files\Microsoft\Exchange Server\Scripts\Exchange2007Edge.xml, Xml Node Name = _locDefinition
[2/2/2015 8:06:47 PM] [2] Ending processing.
[2/2/2015 8:06:47 PM] [1] Executing 'Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007_WinSrv2008.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";', handleError = False
[2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007_WinSrv2008.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";'.
[2/2/2015 8:06:47 PM] [2] Beginning processing.
[2/2/2015 8:06:47 PM] [2] Ending processing.
[2/2/2015 8:06:47 PM] [1] Executing 'Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007_WinSrv2008.xml" -XmlNodeNameToRemove "_locDefinition";', handleError = False
[2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007_WinSrv2008.xml" -XmlNodeNameToRemove "_locDefinition";'.
[2/2/2015 8:06:47 PM] [2] Beginning processing.
[2/2/2015 8:06:47 PM] [2] ExchangeInstallPath = C:\Program Files\Microsoft\Exchange Server\, Relative Path = Scripts\, Xml Full File Path = C:\Program Files\Microsoft\Exchange Server\Scripts\Exchange2007_WinSrv2008.xml, Xml Node Name = _locDefinition
[2/2/2015 8:06:47 PM] [2] Ending processing.
[2/2/2015 8:06:47 PM] [1] Executing 'Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007Edge_WinSrv2008.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";', handleError
= False
[2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007Edge_WinSrv2008.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";'.
[2/2/2015 8:06:47 PM] [2] Beginning processing.
[2/2/2015 8:06:47 PM] [2] Ending processing.
[2/2/2015 8:06:47 PM] [1] Executing 'Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007Edge_WinSrv2008.xml" -XmlNodeNameToRemove "_locDefinition";', handleError = False
[2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007Edge_WinSrv2008.xml" -XmlNodeNameToRemove "_locDefinition";'.
[2/2/2015 8:06:47 PM] [2] Beginning processing.
[2/2/2015 8:06:47 PM] [2] ExchangeInstallPath = C:\Program Files\Microsoft\Exchange Server\, Relative Path = Scripts\, Xml Full File Path = C:\Program Files\Microsoft\Exchange Server\Scripts\Exchange2007Edge_WinSrv2008.xml, Xml Node Name = _locDefinition
[2/2/2015 8:06:47 PM] [2] Ending processing.
[2/2/2015 8:06:47 PM] [1] Executing 'Set-WERRegistryMarkers;', handleError = False
[2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Set-WERRegistryMarkers;'.
[2/2/2015 8:06:47 PM] [2] Beginning processing.
[2/2/2015 8:06:47 PM] [2] Ending processing.
[2/2/2015 8:06:47 PM] [1] Processing component 'All Roles Common First' (Creating the Exchange server configuration in the Active Directory).
[2/2/2015 8:06:47 PM] [1] Executing '$RoleNames = $RoleRoles.Replace('Role','').Split(','); .\ServiceControl.ps1 EnableServices $RoleNames', handleError = False
[2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); $RoleNames = $RoleRoles.Replace('Role','').Split(','); .\ServiceControl.ps1 EnableServices $RoleNames'.
[2/2/2015 8:06:47 PM] [1] Executing 'Set-LocalPermissions', handleError = False
[2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Set-LocalPermissions'.
[2/2/2015 8:06:47 PM] [2] Beginning processing.
[2/2/2015 8:07:00 PM] [2] Ending processing.
[2/2/2015 8:07:00 PM] [1] Executing 'get-service | where { $_.Name -ieq "HealthService" } | stop-service -Force:$true', handleError = False
[2/2/2015 8:07:00 PM] [2] Launching sub-task '$error.Clear(); get-service | where { $_.Name -ieq "HealthService" } | stop-service -Force:$true'.
[2/2/2015 8:07:00 PM] [1] Executing 'get-service | where { $_.Name -ieq "MOM" } | stop-service -Force:$true', handleError = False
[2/2/2015 8:07:00 PM] [2] Launching sub-task '$error.Clear(); get-service | where { $_.Name -ieq "MOM" } | stop-service -Force:$true'.
[2/2/2015 8:07:00 PM] [1] Executing 'get-service | where { $_.Name -ieq "OnePoint" } | stop-service -Force:$true', handleError = False
[2/2/2015 8:07:00 PM] [2] Launching sub-task '$error.Clear(); get-service | where { $_.Name -ieq "OnePoint" } | stop-service -Force:$true'.
[2/2/2015 8:07:00 PM] [1] Executing '$mofFilePath = ($RoleInstallPath + "bin\Exchange.MOF"); $mflFilePath = ($RoleInstallPath + "bin\Exchange.MFL"); compile-moffile -MofFilePath:$mofFilePath; compile-moffile -MofFilePath:$mflFilePath;',
handleError = True
[2/2/2015 8:07:00 PM] [2] Launching sub-task '$error.Clear(); $mofFilePath = ($RoleInstallPath + "bin\Exchange.MOF"); $mflFilePath = ($RoleInstallPath + "bin\Exchange.MFL"); compile-moffile -MofFilePath:$mofFilePath; compile-moffile
-MofFilePath:$mflFilePath;'.
[2/2/2015 8:07:00 PM] [2] Beginning processing.
[2/2/2015 8:07:01 PM] [2] Exchange tracing provider was installed successfully.
[2/2/2015 8:07:01 PM] [2] Ending processing.
[2/2/2015 8:07:01 PM] [2] Beginning processing.
[2/2/2015 8:07:01 PM] [2] Exchange tracing provider was installed successfully.
[2/2/2015 8:07:01 PM] [2] Ending processing.
[2/2/2015 8:07:01 PM] [1] Processing component 'All Roles Precompile Management Binaries' (Pre-compiling management binaries.).
[2/2/2015 8:07:01 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\microsoft.Exchange.Rpc.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
[2/2/2015 8:07:01 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\microsoft.Exchange.Rpc.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
[2/2/2015 8:07:01 PM] [2] Beginning processing.
[2/2/2015 8:07:01 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Rpc.dll" /verbose
[2/2/2015 8:07:02 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
Copyright (c) Microsoft Corporation. All rights reserved.
Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Rpc.dll
All compilation targets are up to date.
[2/2/2015 8:07:02 PM] [2] Process standard error:
[2/2/2015 8:07:02 PM] [2] Ending processing.
[2/2/2015 8:07:02 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\microsoft.Exchange.Common.IL.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
[2/2/2015 8:07:02 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\microsoft.Exchange.Common.IL.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
[2/2/2015 8:07:02 PM] [2] Beginning processing.
[2/2/2015 8:07:02 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Common.IL.dll" /verbose
[2/2/2015 8:07:02 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
Copyright (c) Microsoft Corporation. All rights reserved.
Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Common.IL.dll
All compilation targets are up to date.
[2/2/2015 8:07:02 PM] [2] Process standard error:
[2/2/2015 8:07:02 PM] [2] Ending processing.
[2/2/2015 8:07:02 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Diagnostics.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
[2/2/2015 8:07:02 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Diagnostics.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
[2/2/2015 8:07:02 PM] [2] Beginning processing.
[2/2/2015 8:07:02 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Diagnostics.dll" /verbose
[2/2/2015 8:07:02 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
Copyright (c) Microsoft Corporation. All rights reserved.
Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Diagnostics.dll
All compilation targets are up to date.
[2/2/2015 8:07:02 PM] [2] Process standard error:
[2/2/2015 8:07:02 PM] [2] Ending processing.
[2/2/2015 8:07:02 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Common.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
[2/2/2015 8:07:02 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Common.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
[2/2/2015 8:07:02 PM] [2] Beginning processing.
[2/2/2015 8:07:02 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Common.dll" /verbose
[2/2/2015 8:07:03 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
Copyright (c) Microsoft Corporation. All rights reserved.
Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Common.dll
All compilation targets are up to date.
[2/2/2015 8:07:03 PM] [2] Process standard error:
[2/2/2015 8:07:03 PM] [2] Ending processing.
[2/2/2015 8:07:03 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Core.Strings.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
[2/2/2015 8:07:03 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Core.Strings.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
[2/2/2015 8:07:03 PM] [2] Beginning processing.
[2/2/2015 8:07:03 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Core.Strings.dll" /verbose
[2/2/2015 8:07:03 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
Copyright (c) Microsoft Corporation. All rights reserved.
Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Core.Strings.dll
All compilation targets are up to date.
[2/2/2015 8:07:03 PM] [2] Process standard error:
[2/2/2015 8:07:03 PM] [2] Ending processing.
[2/2/2015 8:07:03 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Net.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
[2/2/2015 8:07:03 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Net.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
[2/2/2015 8:07:03 PM] [2] Beginning processing.
[2/2/2015 8:07:03 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Net.dll" /verbose
[2/2/2015 8:07:04 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
Copyright (c) Microsoft Corporation. All rights reserved.
Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Net.dll
All compilation targets are up to date. -
I tried to upgrade to Firefox 3.6.1 from 3.5 and now I get a msg that I need to reboot to complete a previous install of Firefox. I have rebooted several times. I even tried to remove the Firefox from the add/remove program and it tells me that I need to reboot to complete a previous install. Right now, I just want to get rid of firefox
Hi NWL1,
Thanks for the question. If I understand correctly, the iPhone won't update and is stuck. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
Thanks for using Apple Support Communities.
Have a great day,
Mario -
I need a mixed clustering environment that coexist 2007 CCR cluter with 2010 DAG or 2013 DAG.
Is there any step-by-step article I can refer to?Hi,
Do you want to know how to migrate CCR to DAG?
If you want to migrate from CCR to DAG, there are two available ways to achieve this.
One is to bring the new hardware, the other is to break and format the existing Exchange 2007 CCR Cluster to use the hardware.
Bring the new hardware, you need to install new server and configure Exchange 2010 DAG, then move mailbox from Exchange 2007 to Exchange 2010.
Breaking the existing Exchange 2007 CCR Cluster, you need to decommission your passive Exchange Server 2007 SP2 Node first, re-install Exchange 2010 server role on this server, and then configure Exchange 2010 DAG using this server. After that, you
can migrate mailboxes from Exchange 2007 to Exchange 2010, remove the last Exchange 2007 server. Then add seond server to existing DAG.
Hope this is helpful to you.
Best regards,
Belinda Ma
TechNet Community Support -
What will happen to my previously installed software after upgrading mac to OS X Yosemite?
I'm new to mac OS and I want to upgrade my mac from OS X Mavericks to Yosemite. I want to know if that upgrade would affect my previously installed software (e.g Wolfram Mathematica).
Do I have to re-install those software after upgrading to Yosemite?When the installer is downloaded from the App Store, it is a good idea to make a copy of it with a different name and in another location from the Applications folder, as the original disappears after running.
The installation will leave the user account intact, with your apps and files. However, not all apps will be updated for Yosemite and to save future problems it is advisable to go to the developers' websites and get the latest version, before you make the move.
I see from Roaring Apps, that Wolfram Mathematica may not yet be ready for Yosemite.
http://roaringapps.com/app/mathematica-home-edition -
Weblogic 6.1 server upgrade from SP2 to SP3
Hi All
We have weblogic server 6.1 SP2 installed on the solaris machine. Now we
have to upgrade our weblogic server 6.1 SP3. We also have downloaded the installable.
But that installable seems to over-write the previous weblogic server & installs
the server afresh. Is there any patch kinda thing available which allows me to
upgrade from SP2 to SP3 ? I don't want a fresh new install of SP3 server.
thanks in advance
-Kiran RaneUpgrade installer from SP2 to SP3 is only available for paid BEA
customers. You need a login at http://support.bea.com
Kumar
kiran rane wrote:
Hi All
We have weblogic server 6.1 SP2 installed on the solaris machine. Now we
have to upgrade our weblogic server 6.1 SP3. We also have downloaded the installable.
But that installable seems to over-write the previous weblogic server & installs
the server afresh. Is there any patch kinda thing available which allows me to
upgrade from SP2 to SP3 ? I don't want a fresh new install of SP3 server.
thanks in advance
-Kiran Rane -
Error while installing 2nd exchange 2007 on our domain
We are installing the 2nd exchange 2007 on our domain - for obvious reasons of not able to upgrage the exisitng version to SP3 RU10 - as the server crashes everytime we do an update.
So we thought we will setup a second new exchange 2007 server with all HT MB & CAS & update it fully and move the mailboxes etc.
1st Exchange Server: EXCH01
2nd Exchange Server: EXCH02
We are doing a fresh install on a fresh vmware machine
OS: Windows Server Enterprise Service Pack 2
Exchange 2007 Service Pack 1
During the hub transport installation part we ran into an error
Exchange Server component Hub Transport Role failed.
Error: Error:
Property IsProvisionedServer cannot be set on this object because it requires the object to have version 0.1 (8.0.535.0) or later. Current version of the object is 0.0 (6.5.6500.0).
Log Name: Application
Source: MSExchangeSetup
Event ID: 1002
Now I am unable to uninstall the application as well, even while uninstalling the same error is thrown.
Also, when we open the EMC on 1st exchange server we get an error saying
"Warning:
Object PGCMAIL01 has been corrupted and it is in an inconsistent state. The following validation errors have occurred:
Warning:
Cannot calculate value of property "AdminDisplayVersion": "SerialNumber property is not present.".Hi,
According to your description, I understand that failed install second Exchange 2007 with error “Property IsProvisionedServer cannot be set on this object because it requires the object to have version 0.1 (8.0.535.0) or later. Current version of the object
is 0.0 (6.5.6500.0).”.
If I misunderstand your concern, please do not hesitate to let me know.
Which current Exchange version are you used in your environment?
I want to double confirm whether run Setup /PrepareAD and Setup /PrepareDomain to complete the prerequisite preparation. More details about Preparing Active Directory for Exchange 2007, for your reference:
https://technet.microsoft.com/en-us/library/bb288907(v=exchg.80).aspx. If not, please run it and try again.
Besides, we can use ADSIEdit to double check the version and get more clear-cut error message in Exchange Setup log.
Thanks
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Allen Wang
TechNet Community Support -
Trying to install an upgrade of iTunes on my pc but Error 7 (Windows 193) is preventing the install from going thru. I am logged on as Administrator running windows 8.1 on my pc. I have repaired and uninstalled a couple times These are my warnings
"Service 'Apple Mobile Device Service' ('Apples Mobile Device Service) failed to start. Verify that you have sufficient privilege to start system services." [Abort Retry Ignore ]. "ItunesHelper was not installed correctly "If the above steps haven't helped try installing:
iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
which is a 64-bit installer for a 32-bit core program, similar to previous 64-bit releases of iTunes, or roll back to:
iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
as appropriate.
tt2 -
Not able to run adadmin adfter installing R12 Upgrade file system
Sawwan,
Now we are doing 11i apps to R12 upgrade single node, before we did database upgrade 9i to 10.2.0.4,
I successfully installed R12 upgrade file system with out any errors, i have chagned the
new Installation creates APPL_TOP, COMMON_TOP, INST_TOP and 10g Oracle Home
i moved the new environment file into .bash_profile
mv .bash_profile .bash_profile_11.5.10
Iset the R12 environment , When ever i tried to run adadmin system manager password is not taking its giving error
[applupg@peabody appl]$ adadmin
Copyright (c) 2002 Oracle Corporation
Redwood Shores, California, USA
Oracle Applications AD Administration
Version 12.0.0
NOTE: You may not use this utility for custom development
unless you have written permission from Oracle Corporation.
Your default directory is '/u01/R12/apps/apps_st/appl'.
Is this the correct APPL_TOP [Yes] ?
AD Administration records your AD Administration session in a text file
you specify. Enter your AD Administration log file name or press [Return]
to accept the default file name shown in brackets.
Filename [adadmin.log] :
************* Start of AD Administration session *************
AD Administration version: 12.0.0
AD Administration started at: Sat Apr 18 2009 06:12:52
APPL_TOP is set to /u01/R12/apps/apps_st/appl
Backing up restart files, if any......Done.
Your previous AD Administration session did not run to completion.
Do you wish to continue with your previous AD Administration session [Yes] ?
You are about to use or modify Oracle Applications product tables
in your ORACLE database 'upg'
using ORACLE executables in '/u01/R12/apps/tech_st/10.1.2'.
Is this the correct database [Yes] ?
AD Administration needs the password for your 'SYSTEM' ORACLE schema
in order to determine your installation configuration.
Enter the password for your 'SYSTEM' ORACLE schema: manager
...Unable to connect.
AD Administration error:
The following ORACLE error:
ORA-12541: TNS:no listener
occurred while executing the SQL statement:
CONNECT SYSTEM/*****
AD Administration error:
Unable to connect to 'SYSTEM'; password may be invalid.
AD Administration needs the password for your 'SYSTEM' ORACLE schema
in order to determine your installation configuration.
Enter the password for your 'SYSTEM' ORACLE schema:
Enter the password for your 'SYSTEM' ORACLE schema:
Before running R12 adadmin is there nessary 11i apps servicess should up or down..
Edited by: HumanDBA on May 5, 2009 12:26 PMSawwan,
As a oracle user i am able to see the tns_admin home dir
[oraupg@peabody upg_peabody]$ echo $TNS_ADMIN
/stage/10gsoftware/network/admin/upg_peabody
[oraupg@peabody upg_peabody]$
After installing R12 uprade file system i am able do the tnsping
[applupg@peabody appl]$ tnsping upg
TNS Ping Utility for Linux: Version 10.1.0.5.0 - Production on 18-APR-2009 06:26:49
Copyright (c) 1997, 2003, Oracle. All rights reserved.
Used parameter files:
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION= (ADDRESS=(PROTOCOL=tcp)(HOST=peabody)(PORT=1526)) (CONNECT_DATA=(SID=upg)))
TNS-12541: TNS:no listener
[applupg@peabody appl]$
[applupg@peabody appl]$ sqlplus apps/xxxx@upg
SQL*Plus: Release 10.1.0.5.0 - Production on Sat Apr 18 06:29:45 2009
Copyright (c) 1982, 2005, Oracle. All rights reserved.
ERROR:
ORA-12541: TNS:no listener
Enter user-name:
========================================
Sawwan
after installing i am trying to apply R12.AD.B patch, do we need to apply this patch in 11i fiile system or New R12 file system, for 11i file system i am not getting any issue, but when ever i set the R12 new file system enviroment file then only i am not able to connect the database,i have changed new port numbers in R12 file system, is that causing any issues..?
Edited by: HumanDBA on May 5, 2009 12:37 PM -
Cannot install windows xp home edition w/sp3 into my mac pro mac os 10.6.2
cannot install windows xp home edition w/sp3 into my mac pro mac os 10.6.2. I followed the instructions step by step but it does let me install if fully when asks me to fully install it says it cannot where to install.
Hi,
how much diskspace did you assign to the Windows partition ?
And did you do the reformating of the WIndows partition as described on pages 8-10 of the BootCamp Installation Guide ?
In your first post you mentioned 'fully install' twice. Any chance that the XP disc you use is an Upgrade disc and not a full retail/OEM one ?
Check with the label on the disc because such XP upgrade disc are not useable with BootCamp.
Regards
Stefan -
Problem while installing SAP Netweaver CE 7.1 SP3!
Hi,
I am installing SAP Netweaver CE 7.1 SP3 on Windows XP Pro. The installation
proceeds normally till Step 26 but at Step 26 while creating and startiong
SAPStartSrv an error is thrown that the Service can not be started in 40 seconds.
If I retry the installation it is terminated with some errors.
The service sapstartsrv can be seen in the task manager up and running.
Please reply ASAP.
I am providing here the error logs:
TRACE 2007-11-23 16:56:02.161
NWProfiles(CE1.SCS01)._getProfile(START) done
TRACE 2007-11-23 16:56:02.161
NWProfiles(CE1.SCS01).getStartProfile() done
TRACE 2007-11-23 16:56:02.161
NWInstance.getStartProfilePath(true)
TRACE 2007-11-23 16:56:02.161
NWInstance.getStartProfileName()
TRACE 2007-11-23 16:56:02.161
NWInstance.getStartProfileName() done: CE1_SCS01_AGRD50051628A
TRACE 2007-11-23 16:56:02.161
NWInstance.getDirProfile()
TRACE 2007-11-23 16:56:02.161
NW.getDirProfile(false)
TRACE 2007-11-23 16:56:02.161
NW.getDirProfile() done: C:/usr/sap/CE1/SYS/profile
TRACE 2007-11-23 16:56:02.161
NWInstance.getDirProfile() done: C:/usr/sap/CE1/SYS/profile
TRACE 2007-11-23 16:56:02.176
NWInstance.getStartProfilePath() done: C:/usr/sap/CE1/SYS/profile/CE1_SCS01_AGRD50051628A
TRACE 2007-11-23 16:56:02.176
NWProfiles(CE1.SCS01).getPersistentDefaultProfile()
TRACE 2007-11-23 16:56:02.176
NW.getPersistentDefaultProfile()
TRACE 2007-11-23 16:56:02.207
NW.isUnicode(true)
TRACE 2007-11-23 16:56:02.207
NW.isUnicode() done: true
TRACE 2007-11-23 16:56:02.207
NW.getPersistentDefaultProfile() done
TRACE 2007-11-23 16:56:02.207
NWProfiles(CE1.SCS01).getPersistentDefaultProfile() done
TRACE 2007-11-23 16:56:02.207
NWProfiles(CE1.SCS01)._getPersistentProfile(INSTANCE) done
TRACE 2007-11-23 16:56:02.254
NWInstance.isAlwaysUnicode()
TRACE 2007-11-23 16:56:02.254
NWInstance.isAlwaysUnicode(SCS)
TRACE 2007-11-23 16:56:02.254
NWInstance.isAlwaysUnicode() done: true
TRACE 2007-11-23 16:56:02.254
NWInstance.isAlwaysUnicode() done: true
TRACE 2007-11-23 16:56:02.254
NWProfiles(CE1.SCS01)._getProfile(INSTANCE) done
TRACE 2007-11-23 16:56:02.254
NWProfiles(CE1.SCS01).getProfile() done
TRACE 2007-11-23 16:56:02.317
NWInstance.getSAPLocExeDir() done: C:/usr/sap/CE1/SYS/exe/uc/NTI386
TRACE 2007-11-23 16:56:02.317
NWInstanceInstall.createServiceWindows(): going to run <C:\usr\sap\CE1\SYS\exe\uc\NTI386\sapstartsrv.exe -stdin> with input <-r -q -p C:\usr\sap\CE1\SYS\profile\CE1_SCS01_AGRD50051628A -s CE1 -n 01 -U "NT Authority\LocalService" -P "XXXXXX" -e SAP_ALL\I047488>
TRACE 2007-11-23 16:56:02.317
lognode: undefined, append: false
INFO 2007-11-23 16:56:02.348 [synxcpath.cpp:815]
CSyPath::createFile() lib=syslib module=syslib
Creating file C:\ProgramFiles\sapinst_instdir\CE71_DEV_ADA\INSTALL\sapstartsrv.exe.log.
TRACE 2007-11-23 16:56:02.348 [synxcchapp.cpp:264]
CSyChildApplicationImpl::doStart() lib=syslib module=syslib
Going to call CreateProcess/CreateProcessAsUser for 'C:\usr\sap\CE1\SYS\exe\uc\NTI386\sapstartsrv.exe' now.
TRACE 2007-11-23 16:56:02.348 [synxcchapp.cpp:560]
CSyChildApplicationImpl::doStart() lib=syslib module=syslib
Trying to start C:\usr\sap\CE1\SYS\exe\uc\NTI386\sapstartsrv.exe using CreateProcess(NULL, <command line for executable C:\usr\sap\CE1\SYS\exe\uc\NTI386\sapstartsrv.exe, NULL, NULL, TRUE, 0x420, NULL, NULL, &StartupInfo, &ProcessInfo)
TRACE 2007-11-23 16:56:02.535 [synxcchapp.cpp:638]
CSyChildApplicationImpl::doStart() lib=syslib module=syslib
A child process has been started. Pid = 2480. Executable name: C:\usr\sap\CE1\SYS\exe\uc\NTI386\sapstartsrv.exe
INFO 2007-11-23 16:56:02.535
CJSlibModule::writeInfo_impl()
Output of C:\usr\sap\CE1\SYS\exe\uc\NTI386\sapstartsrv.exe -stdin is written to the logfile sapstartsrv.exe.log.
TRACE 2007-11-23 16:56:45.170 [synxcpipe.cpp:195]
CSyStdOutErrPipe::onUnderflow(void * buf, int maxBytes, int timeout)
lib=syslib module=syslib
Syslib info about system call. OS message 109 (The pipe has been ended.
) after execution of system call 'ReadFile' with parameter ((read end of child process output pipe)), line (403) in file (synxcpipe.cpp).
WARNING 2007-11-23 16:56:45.170
CJSlibModule::writeWarning_impl()
Execution of the command "C:\usr\sap\CE1\SYS\exe\uc\NTI386\sapstartsrv.exe -stdin" finished with return code -1. Output:
Service not started within 40 seconds.
TRACE 2007-11-23 16:56:45.170
NWInstance.getSAPLocExeDir()
TRACE 2007-11-23 16:56:45.170
NWInstance.getProfiles()
TRACE 2007-11-23 16:56:45.170
NWInstance.getProfiles(): profiles object exists
TRACE 2007-11-23 16:56:45.170
NWInstance.getProfiles() done
TRACE 2007-11-23 16:56:45.170
NWProfiles(CE1.SCS01).getProfile()
TRACE 2007-11-23 16:56:45.170
NWProfiles(CE1.SCS01)._getProfile(INSTANCE)
TRACE 2007-11-23 16:56:45.170
NWProfiles(CE1.SCS01).getPersistentDefaultProfile()
TRACE 2007-11-23 16:56:45.170
NW.getPersistentDefaultProfile()
TRACE 2007-11-23 16:56:45.186
NW.isUnicode(true)
TRACE 2007-11-23 16:56:45.186
NW.isUnicode() done: true
TRACE 2007-11-23 16:56:45.186
NW.getPersistentDefaultProfile() done
TRACE 2007-11-23 16:56:45.186
NWProfiles(CE1.SCS01).getPersistentDefaultProfile() done
TRACE 2007-11-23 16:56:45.201
NWProfiles(CE1.SCS01)._getPersistentProfile(INSTANCE)
TRACE 2007-11-23 16:56:45.217
NWProfiles(CE1.SCS01).getPersistentDefaultProfile()
TRACE 2007-11-23 16:56:45.217
NW.getPersistentDefaultProfile()
TRACE 2007-11-23 16:56:45.232
NW.isUnicode(true)
TRACE 2007-11-23 16:56:45.232
NW.isUnicode() done: true
TRACE 2007-11-23 16:56:45.232
NW.getPersistentDefaultProfile() done
TRACE 2007-11-23 16:56:45.232
NWProfiles(CE1.SCS01).getPersistentDefaultProfile() done
TRACE 2007-11-23 16:56:45.232
NWProfiles(CE1.SCS01)._getPersistentProfile(INSTANCE) done
TRACE 2007-11-23 16:56:45.264
NWInstance.isAlwaysUnicode()
TRACE 2007-11-23 16:56:45.264
NWInstance.isAlwaysUnicode(SCS)
TRACE 2007-11-23 16:56:45.264
NWInstance.isAlwaysUnicode() done: true
TRACE 2007-11-23 16:56:45.264
NWInstance.isAlwaysUnicode() done: true
TRACE 2007-11-23 16:56:45.264
NWProfiles(CE1.SCS01)._getProfile(INSTANCE) done
TRACE 2007-11-23 16:56:45.264
NWProfiles(CE1.SCS01).getProfile() done
TRACE 2007-11-23 16:56:45.326
NWInstance.getSAPLocExeDir() done: C:/usr/sap/CE1/SYS/exe/uc/NTI386
WARNING[E] 2007-11-23 16:56:45.326
CJSlibModule::writeError_impl()
MOS-01011 'C:/usr/sap/CE1/SYS/exe/uc/NTI386/sapstartsrv.exe' returned with '-1'.
TRACE 2007-11-23 16:56:45.326 [iaxxejsbas.hpp:408]
handleException<ESAPinstJSError>()
Converting exception into JS Exception EJSException.
TRACE 2007-11-23 16:56:45.326
Function setMessageIdOfExceptionMessage: osmod.applicationReturn
WARNING[E] 2007-11-23 16:56:45.326
CJSlibModule::writeError_impl()
MOS-01011 'C:/usr/sap/CE1/SYS/exe/uc/NTI386/sapstartsrv.exe' returned with '-1'.
TRACE 2007-11-23 16:56:45.326 [iaxxejsbas.hpp:483]
EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
ERROR 2007-11-23 16:56:45.357 [sixxcstepexecute.cpp:891]
FCO-00011 The step createService with step key |CE_DevSystem_App|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_Instance|ind|ind|ind|ind|1|0|createService was executed with status ERROR .
TRACE 2007-11-23 16:56:45.373 [iaxxgenimp.cpp:761]
CGuiEngineImp::showMessageBox
<html> <head> </head> <body> <p> An error occurred while processing service SAP NetWeaver CE Developer Edition > SAP NetWeaver CE Development System. You may now </p> <ul> <li> choose <i>Retry</i> to repeat the current step. </li> <li> choose <i>View Log</i> to get more information about the error. </li> <li> stop the task and continue with it later. </li> </ul> <p> Log files are written to C:\Program Files/sapinst_instdir/CE71_DEV_ADA/INSTALL. </p> </body></html>
TRACE 2007-11-23 16:56:45.373 [iaxxgenimp.cpp:1257]
CGuiEngineImp::acceptAnswerForBlockingRequest
waiting for an answer from gui
INFO 2007-11-23 17:15:43.180 [sixxcstepexecute.cpp:936]
An error occured and the user decided to retry the current step: "|CE_DevSystem_App|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_Instance|ind|ind|ind|ind|1|0|createService".
INFO 2007-11-23 17:15:43.196 [synxccuren.cpp:1016]
CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(const CSyPath & C:/Program Files/sapinst_instdir/CE71_DEV_ADA/INSTALL)
lib=syslib module=syslib
Working directory changed to C:/Program Files/sapinst_instdir/CE71_DEV_ADA/INSTALL.
TRACE 2007-11-23 17:15:43.227 [syxxcfile.cpp:130]
CSyFileImpl::decideIfMoveCopyNode(const CopyMoveDestinationInfo & , ISyNode::CopyMoveMode_t 0x3, PSyNode &) const
lib=syslib module=syslib
Target node does not exists and (mode & ISyNode::MISSING) ==> I will copy/move.
TRACE 2007-11-23 17:15:43.243 [syxxcnode.cpp:441]
CSyNodeImpl::move(const CSyPath & C:/Program Files/sapinst_instdir/CE71_DEV_ADA/INSTALL/stepLogMessages.1.xml, ISyNode::CopyMoveMode_t 0x3)
lib=syslib module=syslib
Moved C:/Program Files/sapinst_instdir/CE71_DEV_ADA/INSTALL/stepLogMessages.xml to C:/Program Files/sapinst_instdir/CE71_DEV_ADA/INSTALL/stepLogMessages.1.xml
TRACE 2007-11-23 17:15:43.243 [sixxcstepexecute.cpp:795]
Execution of preprocess block of |CE_DevSystem_App|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_Instance|ind|ind|ind|ind|1|0|createService returns TRUE.
TRACE 2007-11-23 17:15:43.258
Instantiating new NWUsageTypeBasic
TRACE 2007-11-23 17:15:43.258
NWUsageTypeBasic() done
TRACE 2007-11-23 17:15:43.258
Call block:NW_Instance_ind_ind_ind_ind
function:NW_Instance_ind_ind_ind_ind_SubComponentContainer_createService
is validator: false
TRACE 2007-11-23 17:15:43.274
NWInstance.byNumber(01, AGRD50051628A)
TRACE 2007-11-23 17:15:43.274
NWInstanceInstall.find(
function (instance) {
return instance.getNumber() == number && instance.getHostName().equals(host);
TRACE 2007-11-23 17:15:43.274
NWOption(collected).value()
TRACE 2007-11-23 17:15:43.274
NWOption(collected).value() done: true
TRACE 2007-11-23 17:15:43.274
NWInstanceInstall._fromRow()
TRACE 2007-11-23 17:15:43.274
NWDialogInstanceInstall()
TRACE 2007-11-23 17:15:43.274
NWJavaInstanceInstall()
TRACE 2007-11-23 17:15:43.274
NWJavaInstanceInstall() done
TRACE 2007-11-23 17:15:43.274
NWDialogInstance()
TRACE 2007-11-23 17:15:43.274
NWJavaInstance()
TRACE 2007-11-23 17:15:43.274
NWInstance(CE1/J00/AGRD50051628A)
TRACE 2007-11-23 17:15:43.274
NWInstance(CE1/J00/AGRD50051628A) done
TRACE 2007-11-23 17:15:43.274
NWJavaInstance() done
TRACE 2007-11-23 17:15:43.274
NWDialogInstance() done
TRACE 2007-11-23 17:15:43.274
NWInstanceInstall()
TRACE 2007-11-23 17:15:43.274
NWInstanceInstall() done
TRACE 2007-11-23 17:15:43.274
NWDialogInstanceInstall() done
TRACE 2007-11-23 17:15:43.274
NWInstanceInstall._fromRow() done
TRACE 2007-11-23 17:15:43.274
NWInstanceInstall._fromRow()
TRACE 2007-11-23 17:15:43.274
NWSCSInstanceInstall()
TRACE 2007-11-23 17:15:43.274
NWSCSInstance()Hi Michael,
I have tried that, but the result remains the same.
Manish -
Need to reinstall Photoshop CS2 but it can't find a previously installed version so won't reinstall
Photoshop CS2 told me there was a "major problem" and that I would need to reinstall the software to continue using it.
So I used the installer CD, but it told me it could not install because there was already a copy installed, which would need to be removed.
So I removed the old version and tried to reinstall but now it tells me it needs a previously installed version in order to reinstall.
Adobe "customer service"chat is 100% useless on this, referred me to the 800 #, been on hold for over 45 miinutes now, and no relevant topics found on "help" forums.
For a multibillion dollar monopoly, you'd think they could hire a couple of customer service reps but I guess it's all DIY "support" here, so can anyone help?So, you are NOT trying to reinstall an upgrade, but a purchased version (not in an upgrade path from one version to the next)?
If that is correct, there should be no request for a "previously installed version." That only appears when one is installing an upgrade.
Are you installing from physical media (a DVD), or from a download?
Sorry, I do not have an answer for you.
Good luck,
Hunt -
How to Configure MS Exchange 2007 CCR and SCC Cluster in a single system
Hi i want to configure ms-exchange 2007 server for both SCC and CCR. i have two Windows Server 2008 on running on my hyper-v. by using cluster on both hyper v i want to install MS-Exchange 2007 for both SCC and CCR. ideally one windows server 2008 has
Active Nodes and another one has passive nodes. please guide me as i am new in the fieldDuplicate of
http://social.technet.microsoft.com/Forums/exchange/en-US/edea43a1-59b4-4d26-9b41-76d0f4677095/how-to-configure-ms-exchange-2007-ccr-and-scc-cluster-in-a-single-system?forum=exchangesvrgenerallegacy#c6e08365-c01a-40aa-a8bc-94219757ef13
Blog |
Get Your Exchange Powershell Tip of the Day from here -
iTunes fails to load. Message is "Service Apple Mobile Device failed to start. Verify you have sufficient privileges to start system services." Never had this problem before trying to install this upgrade. How do I fix this?
Dave, same problem here. And I did go in as admin to Administrative Tools, Services, Apple Mobile Devices and tried restarting the service. It seems there is a bug with the newest update, period. All of the normal "easy" steps don't work. Before I remove all of Apple's programs, including Bonjour....I'm running a full system scan.
But the answer will be to remove all of the Apple stuff, then reboot, then use whatever utility you have to remove all temp files...then go download and install it again. This has worked for several people (I read the thread before posting). Win 7 64bit. It just seems that Apple did not thoroughly test this new version. Period.
If Apple reads this...I have many computers...and whenever Apple wants to update something...it just about stops everything else that is going on. Total memory hog, even with 16G RAM and dual quad core processors. It has to learn to play nice with others.
After the scan and I'm sure an hour or two of work...I'll re-post.
Of course if you do image back-ups, as I do, you can simply restore your drive to its previous state and run the previous version of iTunes, declining the update, until Apple gets it right. Depending on the size of your drive, this could take hours. It is a matter of choice, of course.
Maybe you are looking for
-
having major problems with my ipod shuffle 2nd gen. I installed i tunes 7.02, then installed my new shuffle. I checked the auto update of the ipod and the ipod then loaded all of the songs it could from my library onto the piod. I attempted to change
-
hi gurus, I am sap fi/co consultant, i have a doubt in vendor reporting. Their is any option to get vendor report like purchase material, ed, vat, withholding tax for a particular vendor. 81 purchase material a/c dr 40 ed a/c dr 40 vat a/c dr 31
-
Mac only starts up in OS X Utilities
I just recently downloaded OS X Yosemite, however was really laggy afterwards, so I decided to try and re install a new copy of the OS X by using disk utilities. When it was complete it only brought me back to the OS X Utilities and continues to .Als
-
I purchased photosop cs6 2 years ago, I believe that it is registed with Adobe as I have been downloading updated from them. Today popup a screen saying that it was a trial copy
-
Can't get windows 7 netbook onto wireless internet via airport extreme.
I've spent 3 days trying to get my new Acer netbook with windows 7 home premium in it on the internet wirelessly through my Airport Extreme. It shows the internet is there but will not connect. It keeps asking me for a security key. I have tried my s