Previous version always ask "save&quit?" how to set that on firefox4

Firefox 3 before quitting asked if I want to save&quit so when opening again it opened all tabs
Firefox4 open Google only

Firefox now always stores the old session, and you can access it by going to the History menu and selecting "Restore Previous Session"
If you want Firefox to display the message to save the session, it can be turned back on by changing some preferences.
# Type '''about:config''' into the location bar and press enter
# Accept the warning message that appears, you will be taken to a list of preferences
# Locate the preference '''browser.tabs.warnOnClose''', if its value is set to '''false''', double-click on it to change its value to '''true'''
# Repeat this for these 3 preferences '''browser.warnOnQuit''', '''browser.warnOnRestart''' and '''browser.showQuitWarning'''
If you always open the last set of tabs, an alternative approach is this:
# Click the orange Firefox button, then select options to open the options window
# Go to the General panel
# Change the setting "When Firefox starts" to "Show my windows and tabs from last time"

Similar Messages

When exit they normally ask whether we want SAVE & QUIT, how to enable that function to appear?

As stated above, how can we enable that function back again? As it is troublesome for me when i exit and next day i need click those necessary tab out.

You can set the warn prefs on the about:config page to true via the right-click context menu or toggle the value with a double left-click.
* browser.tabs.warnOnClose, see http://kb.mozillazine.org/About%3Aconfig_entries
* browser.warnOnQuit , see http://kb.mozillazine.org/browser.warnOnQuit
* browser.warnOnRestart , see http://kb.mozillazine.org/browser.warnOnRestart
Another possibility is to use:
*Tools > Options > General > Startup: "When Firefox Starts": "Show my windows and tabs from last time"
To open the about:config page, type about:config in the location (address) bar and press the "Enter" key, just like you type the url of a website to open a website. 
If you see a warning then you can confirm that you want to access that page. 
Firefox 4 saves the previous session automatically, so in that version there is no longer need for the dialog asking if you want to save the current session. 
You can use "Firefox > History > Restore Previous Session" to get the previous session. 
There is also a "Restore Previous Session" button on the default about:home Home page.

In the new version of Thunderbird it seems impossible to set that attachments are shown as"Read only". It was possible in previous versions. Can anybody help?

In previous version of Thunderbird it was possible to set that incoming attachments are shown as "Read only". The solution was to set browser.helperApps.deleteTempFileOnExit as TRUE. In the latest version, no matter how I set this value,. the attachments ARE NOT shown as Read Only. As I need my attachments to be shown as Read Only, I had to restore older versions of Thunderbird. Does anybody have an idea how I can solve this in the new version of Thunderbird ?

''Wayne Mery [[#answer-672415|said]]''
<blockquote>
hmm, https://bugzilla.mozilla.org/show_bug.cgi?id=1009465 and https://bugzilla.mozilla.org/show_bug.cgi?id=1095893 seem relevant
</blockquote>
I don't see a solution on these links. I am not a computer expert, but it was easy to fix in previous versions of Thunderbird. I can't do it now with the latest version, on either Windows 7 or 8.

In previous version I could save ALL TABs in 1 folder, not in "9", why / how?

in previous version I could save ALL TABs as a bookmark into 1 folder, not in "9", why / how?

You can do this by right-clicking on one of the tabs in the tab bar and selecting "Bookmark All Tabs". It will then prompt you for a name to give the new folder of bookmarks and where to put it. When viewing any folder in the bookmarks menu there will be an "Open All In Tabs" to click at the bottom of the folder to open them all at once.

I updated vietmobile remote files app. this app is broken on iOS 5.1.1 I do not have a backup of the previous version of the (paid) app, how can I roll back to the previous version? Is there a repository of previous versions? Am I boned?

I updated vietmobile remote files app. this app is broken on iOS 5.1.1 I do not have a backup of the previous version of the (paid) app, how can I roll back to the previous version? Is there a repository of previous versions? Am I boned?
Seems silly to not allow a rollback from a file repository of previous app versions.

>All apps are tied to the account that downloaded it, so to be able to sync back the previous version you would need to still have your copy of that version
I'm not sure I follow, I have not sync'd the ipad with my computer. I just saw an update in the app store and took it.
I tried to del and install the app from the purchased tab in the app store, that reinstalled v2.1 of the app. This also fails to launch.
I have made two service requests to the developer, no response at this time.
Is there somewhere I can download and install Remote Files version 2 file? I can only find the new version 2.1 in the app store.

I always chose "save & quit" when I close and sometimes all my history is gone when I open Firefox again. Why? It just happened again. Can I get that history back?

I always chose "save & quit" when I close and sometimes all my history is gone when I open Firefox again. Why? It just happened again. Can I get that history back?

You get message "firefox is still running" and computer restart doesn't help you. Try the advice below.
Make sure Firefox isn't running (end firefox.exe process in Task Manager or restart computer)
Find your profile folder
C:\Documents and Settings\USERNAME\Application Data\Mozilla\Firefox\Profiles\xxxxxxxx.default
find file "parent.lock" in it and delete it (the file is empty, its function is to signify to Firefox whether it's already open or not).
Then try to open Firefox again. Will it start or not? What will it say?

Firefox 4 is extremely slow to perform any function on my lap top compared to previous versions. Why? And how do I change this!

Firefox 4 is extremely slow to perform any function on my lap top compared to previous versions. Why? And how do I change this!

Firefox 21 and Firefox 22 running on Windows 7 have been reported to take a long time to "wake up" from sleep. I realize hibernation is different than sleep, but... this is the closest match for your description.
Some users have reported that this problem is resolved in Firefox 23 (currently in beta). Others have had inconsistent luck with minimizing Firefox before letting Windows sleep and other measures.
Please check out this (very long) thread for more information: [https://support.mozilla.org/questions/961898 browser freezes after resuming from sleep]
Or jump to the part about Firefox 23: https://support.mozilla.org/questions/961898?page=3#answer-457321
The fact that this just started recently suggests perhaps it is related to another program or update, but I don't think anyone has confirmed the exact interaction that causes the problem.

I have osx 10.7.5 . i wanna know if can directly update to 10.9 as in previous version update asking for more version like if i hv to install 10.7.5 i must hv 10.7.4 ! very doubtful i m .. as in India its very difficult to dwnl 6gb

i have osx 10.7.5 . i wanna know if can directly update to 10.9 as in previous version update asking for more version like if i hv to install 10.7.5 i must hv 10.7.4 ! very doubtful i m .. as in India its very difficult to dwnld 6gb.

If Mavericks is supported by your machine you can download it for free via the App Store.

I have airport extreme and just purchased a D-Link DCS-932L home network camera. D-Link says I need UpNp but the extreme doesn't support this. Can I use port mapping? if so anyone know how to set that up? thanks

I have airport extreme and just purchased a D-Link DCS-932L home network camera. D-Link says I need UpNp but the extreme doesn't support this. Can I use port mapping? if so anyone know how to set that up? thanks

Since the D-Link DCS-932L is accessible on the local network via a web browser, you should be able to access this camera from the Internet if your router has a publically accessible Public IP address. If your ISP provides you with a dynamic Public IP address, you may want to use a DDNS service to make it easier for you to locate your camera whenever your ISP changes your IP address.
Start the AirPort Utility > Select the 802.11n AirPort Extreme Base Station (AEBSn).
Select Manual Setup.
Verify that Connection Sharing = Share a public IP address is selected on the Internet > Internet Connection tab.
Select Advanced, and then, select the Port Mapping tab.
Click the plus sign to add a new port mapping.
For Service, leave the default; this will change to "Custom" once you start entering port values.
In the Public UDP Port(s) and Public TCP Port(s) boxes, type in a 4-digit port number (e.g., 8888) that you choose. In the Private IP Address box, type the internal IP address of your camera. In the Private UDP Port(s) and Private TCP Port(s) boxes, enter the appropriate port values that should have been provided to you by the camera manufacturer. Click Continue.
In the Description box, type a descriptive name like "Internet Camera Access," and then, click Done.
Click on Update.
To connect to the shared Camera from a remote location using a Mac or PC:
Start your favorite web browser.
Enter either your Public IP address or DDNS-provided Domain Name, followed by a colon and the Public port number that you choose in step 7 of the previous procedure. For example: http://123.123.123.123:8888 or http://www.mydtdnsdomainname.com:8888

I don't want picking related DO, how to set that. Thanks a lot.

I don't want picking related DO, how to set that. Thanks a lot.

Hi Han,
Please goto tcode 0VLP , and untick the checkbox 'relavant for picking'.
Best Regards,
Gaurav Raghav

.png files open in browser even though I have set prefs for .png files to "Always ask" instead. How fo I force Firefox to save .pngs and not open in browser?

Forefox will not download or ask me to save .png files even though I set that file extension in Prefs -> Applications dialog box to be "Always ask"
I have to be able to donwload and save .png files and I can't do that if they load in a browser window.

I find it odd that the browsers on the Android platform can't support this on their own. I know that Google Chrome on it's full blown version for the PC is able to do so without using the Adobe software for the embedded PDF aka using "The Adobe PDF Link Helper" . I would love to see this change especially since I prefer Firefox over other browsers.

Why does Intel version always ask for my password when adding loops?

When I add loops to the PPC version, it never asks for my password. I want this behavior on the Intel version. Always asking for my password’s really annoying. Thanks very much. Peace.

Being able to to access, install and change anything on your computer with a simple keystroke is just not a good thing security wise. Maybe you don't download from unknown sources, use a wifi network, use public or work networks, IM, let others use your computer or let OS and software get out of date. But people reading this may not be in your situation. Most password hacking tools will start with single keystrokes and no password will gain access in a fraction of a second.

Save for previous version 8.5 to 8.2 generates code that crashes Labview (uses classes)

Hello,
I'm working on some java style interfaces for labview for hot swapping of instrumentation for design patterns. When I try to port this code, developed on Labview 8.5 back to labview 8.2, the code it generates crashes labview (both 8.5 and 8.2).
Included is a small snipet of the work that demonstrates this behavior.
It includes to classes:
untitledProject1 - the containing project (version 8.5)
FunctionGeneratorI - Similar to a Java style interface (A class with all Dynamic VI's with no useful functionality)
FunctionGenerator33220a - An intended implementation of Function generator (only a few functions implemented)
and a folder "labview8_2Distribution"
Which contains the port of the 8.5 code to 8.2.
To recreate the error:
A.
1. Open "labview8_2Distribution\Users\Laptop\Desktop\object\Untitled Project 1" (8.2 save)
2. Verify it crashes labview 8.5 and labview 8.2.
3. Watch labview crash?
B.
1. Open the "Untitled project 1" in the root directory. (Using labview 8.5)
2. Save the project as a labview 8.2 type.
3. Try to open the saved version with 8.5 and 8.2.
4. Watch labview crash?
Greg Sonnenfeld
Attachments:
error.zip ‏885 KB

Hello Karunya,
In regards to your questions:
>Can you post your code? Have you tested this by creating another project?
Do you have an xcontrols in your projects? Do you have typedefs? Do you
have a LVOOP constant on your block diagram? Are you also using Classes?
I cannot post the cost as it is way too big. Not really my code but a spaghetti code from a previous programmer. I think problems saving it to a previous version have to do with a few things:
1) Memory - I have 1 GB of RAM and I am running XP. I notice the available RAM dropping quickly as it is saving and then it blow up.
2) Long Filenames - The directory path of the original file is incorporated into the saved "previous version" of the code. While a good design, it does make the file/path a bit longer when saving
3) One of teh things it saves is the drivers and their menus. This is due to the drivers being in a subdirectory of the original code and not in the c:\program files\national instruments\labview 8.5\instr.lib directory. I saw this when I tried to save the file as an LLB.
4) If I work with smaller parts of the code without long paths, it saves fine.
There probably are xcontrols, definitely typedefs, no LVOOP's or Classes. Hope you can do something with all this. It just seems that converting to a later version of the code should be reversable. Thanks.
Michael

How can I return to a previous version of Numbers? Or how can I have all my sheets show on a column on the left hand side, as in the previous version?

I updated my Numbers for Mac only to find out that there are several changes that make it less appealing for me so far (and I don't think it's only the learning curve). Questions: a) can I somehow edit the location of where I can find all the sheets (right now they are on top of the page, and you can't see all of them listed at quick glance but must scroll/arrow through them) I have in that spreadsheet? In the previous version they were all easy access on the left hand side.
Or b) can one go back to a previous version of a program somehow?
Thank you for any leads/answers!
L

can I somehow edit the location of where I can find all the sheets (right now they are on top of the page, and you can't see all of them listed at quick glance but must scroll/arrow through them)
On my machine I just hit shift-command-j (the keyboard shortcut I assigned in System Preferences) and a list of the sheets in the current document pops up:
I type a number from the list and jump immediately to that sheet. The hands never have to leave the keyboard.
(This particular document had a sheet named for each month. But the sheets in your document automatically will be listed instead.)
This is done via a Jump to Sheet Automator Service (Dropbox download). To install just doubleclick the .workflow package and (if needed) click 'Download Anyway' in System Preferences > Privacy & Security.
Installation will cause a new item to appear in your Numbers > Services menu. Then, if you want a keyboard shortcut, go here in System Preferences and add one:
You can rename or remove the service by holding down the option key in Finder and choosing Go > Library > Services. You can also view the AppleScript contaned within the service by opening the .workflow package in Automator.
Note, also, that in Numbers 3 you don't have to use those left-right arrows upper right to slowly scroll left-right to the sheets that are out of view. Just move your cursor up to the "band" with the "tabs" and drag left or right. That's much faster than using the arrows.
SG

Updated to firefox 6.0.1 2 hours ago. i have yahoo as home page. now, after the update, i do not get facebook messages in my yahoo mail. all was fine with previous version of firefox. tell me how to get back to previous firefox version.

1 am pdt update time

See McAfee support to find out how to disable that McAfee feature - that isn't part of the normal Firefox installation.

Previous version always ask "save&quit?" how to set that on firefox4

Similar Messages

Maybe you are looking for